Search

On-surface synthesis has become a prominent method for growing low-dimensional carbon-based nanomaterials on metal surfaces. However, the necessity of decoupling organic nanostructures from metal substrates to exploit their properties requires either transfer methods or new strategies to perform reactions directly on inert surfaces. The use of on-surface light-induced reactions directly on semiconductor/insulating surfaces represents an alternative approach to address these challenges. Here, exploring the photochemical activity of different organic molecules on a SnSe semiconductor surface under ultra-high vacuum, we present a novel on-surface light-induced reaction. The selective photodissociation of the anhydride group is observed, releasing CO and CO 2 . Moreover, we rationalize the relationship between the photochemical activity and the π-conjugation of the molecular core. The different experimental behaviour of two model anhydrides was elucidated by theoretical calculations, showing how the molecular structure influences the distribution of the excited states. Our findings open new pathways for on-surface synthesis directly on technologically relevant substrates., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Precise control of multiple spin states on the atomic scale presents a promising avenue for designing and realizing magnetic switches. Despite substantial progress in recent decades, the challenge of achieving control over multiconfigurational reversible switches in low-dimensional nanostructures persists. Our work demonstrates multiple, fully reversible plasmon-driven spin-crossover switches in a single π-d metal-organic chain suspended between two electrodes. The plasmonic nanocavity stimulated by external visible light allows for reversible spin crossover between low- and high-spin states of different cobalt centers within the chain. We show that the distinct spin configurations remain stable for minutes under cryogenic conditions and can be nonperturbatively detected by conductance measurements. This multiconfigurational plasmon-driven spin-crossover demonstration extends the available toolset for designing optoelectrical molecular devices based on SCO compounds.

Helicenes represent an important class of chiral organic material with promising optoelectronic properties. Hence, functionalization of surfaces with helicenes is a key step toward new organic materials devices. The deposition of a heterohelicene containing two furano groups and two hydroxyl groups onto copper(111) surface in ultrahigh vacuum leads to different adsorbate modifications. At low coverage and low temperature, the molecules tend to lie on the surface in order to maximize van der Waals contact with the substrate. Thermal treatment leads to deprotonation of the hydroxyl groups and in part into a reorientation from lying into a standing adsorbate mode., (© 2024 The Authors. Chirality published by Wiley Periodicals LLC.)

Two-dimensional (2D) materials are of great interest in many fields due to their astonishing properties at an atomic level thickness. Many fundamentally different methods to synthesize 2D materials, such as exfoliation or chemical vapor deposition (CVD), have been reported. Despite great efforts and progress to investigate and improve each synthesis method, mainly to increase the yield and quality of the synthesized 2D materials, most approaches still involve some compromise. Herein, we systematically investigate a chemical vapor deposition (CVD) process to synthesize molybdenum disulfide (MoS 2 ) single layer flakes using sodium molybdate (Na 2 MoO 4 ), deposited on a silica (SiO 2 /Si) substrate by spin-coating its aqueous solution, as the molybdenum source and sulfur powder as sulfur source, respectively. The focus lies on the impact of oxygen (O 2 ) in the gas flow and temperature-time-profile on reaction process and product quality. Atomic force microscopy (AFM), Raman and photoluminescence (PL) spectroscopy, X-ray photoelectron spectroscopy (XPS), and time-of-flight secondary ion mass spectrometry (ToF-SIMS) were used to investigate MoS 2 flakes synthesized under different exposure times of O 2 and with various temperature-time-profiles. This detailed study shows that the MoS 2 flakes are formed within the first few minutes of synthesis and elaborates on the necessity of O 2 in the gas flow, as well as drawbacks of its presence. In addition, the applied temperature-time-profile highly affects the ability to detach MoS 2 flakes from the growth substrate when immersed in water, but it has no impact on the flake.

In the present report, homochiral hydrogen-bonded assemblies of heavily N-doped (C 9 H 6 N 6 ) heterocyclic triimidazole (TT) molecules on an Ag(111) substrate were investigated using scanning tunneling microscopy (STM) and low energy electron diffraction (LEED) techniques. The planar and prochiral TT molecules, which exhibit a threefold rotation symmetry and lack mirror symmetry when assembled on the substrate, carry multiple hydrogen-bonding donor and acceptor functionalities, inevitably leading to the formation of hexameric two-dimensionally extended assemblies that can be either homo- ( RR / SS ) or heterochiral ( RS ). Experimental STM data showing well-ordered homochiral domains and experimental LEED data are consistent with simulations assuming the R 19.1° overlayer on the Ag(111) lattice. Importantly, we report the unexpected coincidence of spontaneous resolution with the condensation of neighboring islands in adjacent "Janus pairs". The islands are connected by a characteristic fault zone, an observation that we discuss in the context of the fairly symmetric molecule and its propensity to compromise and benefit from interisland bonding at the expense of lattice mismatches and strain in the defect zone. We relate this to the close to triangular shape and the substantial but weak bonding scheme beyond van der Waals (vdW) of the TT molecules, which is due to the three N-containing five-membered imidazole rings. Density functional theory (DFT) calculations show clear energetic differences between homochiral and heterochiral pairwise interactions, clearly supporting the experimental results., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

The on-surface dimerization into bis(hexahelicene) on a gold(111) surface has been studied by means of scanning tunneling microscopy and time-of-flight secondary mass spectrometry. C-C Ullmann coupling of (rac)-2-bromo-hexahelicene leads to formation of the (M,M)- and (P,P)-diastereomers of 2,2'-bis(hexahelicene), whilst formation of the (M,P)-diastereomer is not observed. Upon cooling, the bis(hexahelicene) aggregates into an ordered two-dimensional lattice with partly randomly distributed enantiomers. The highly specific diastereomeric coupling is explained by the surface alignment of educt in combination with the strong steric overcrowding in a possible surface-confined (M,P)-product., (© 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

One-dimensional metal-organic chains often possess a complex magnetic structure susceptible to modification by alteration of their chemical composition. The possibility to tune their magnetic properties provides an interesting playground to explore quasi-particle interactions in low-dimensional systems. Despite the great effort invested so far, a detailed understanding of the interactions governing the electronic and magnetic properties of the low-dimensional systems is still incomplete. One of the reasons is the limited ability to characterize their magnetic properties at the atomic scale. Here, we provide a comprehensive study of the magnetic properties of metal-organic one-dimensional (1D) coordination polymers consisting of 2,5-diamino-1,4-benzoquinonediimine ligands coordinated with Co or Cr atoms synthesized under ultrahigh-vacuum conditions on a Au(111) surface. A combination of integral X-ray spectroscopy with local-probe inelastic electron tunneling spectroscopy corroborated by multiplet analysis, density functional theory, and inelastic electron tunneling simulations enables us to obtain essential information about their magnetic structures, including the spin magnitude and orientation at the magnetic atoms, as well as the magnetic anisotropy.

Single atom magnets offer the possibility of magnetic information storage in the most fundamental unit of matter. Identifying the parameters that control the stability of their magnetic states is crucial to design novel quantum magnets with tailored properties. Here, we use X-ray absorption spectroscopy to show that the electronic configuration of dysprosium atoms on MgO(100) thin films can be tuned by the proximity of the metal Ag(100) substrate onto which the MgO films are grown. Increasing the MgO thickness from 2.5 to 9 monolayers induces a change in the dysprosium electronic configuration from 4f 9 to 4f 10 . Hysteresis loops indicate long magnetic lifetimes for both configurations, however, with a different field-dependent magnetic stability. Combining these measurements with scanning tunneling microscopy, density functional theory, and multiplet calculations unveils the role of the adsorption site and charge transfer to the substrate in determining the stability of quantum states in dysprosium single atom magnets.

The chiral self-assembly of trispentahelicene propellers on a gold surface has been investigated in ultrahigh vacuum by means of scanning tunneling microscopy and time-of-flight secondary ion mass spectrometry. The trispentahelicene propellers aggregate into mirror domains with an enantiomeric ratio of 2 : 1. Thermally induced cyclodehydrogenation leads to planarization into nanographenes, which self-assemble into closed-packed layers with two different azimuths. Further treatment induces in part dimerization and trimerization by intermolecular cyclodehydrogenation., (© 2021 The Authors. Published by Wiley-VCH GmbH.)

Hydrogen plays important roles in the on-surface synthesis of carbon-based materials in ultra-high vacuum. The complex interplay between hydrogen and surface-adsorbed polycyclic aromatic hydrocarbons (PAHs) is tracked by in situ time-of-flight secondary ion mass spectrometry (ToF-SIMS) combined with isotope labeling. In situ deuterium labeling of prototypical PAHs, coronene (CR) and 7-armchair graphene nanoribbons (GNRs), on Au(111) is achieved by annealing either in D 2 gas or in the vapor of perdeuterio-acenaphthene. By following the mass spectra of in situ deuterated CR mixed with hydrogen-CR, it is demonstrated that PAHs adsorbed at hot Au(111) surfaces continuously exchange hydrogen atoms. Also, D 2 present during the Ullmann coupling step leads to incorporation of deuterium and to shorter GNRs., (© 2021 Wiley-VCH GmbH.)

We have studied the morphology of Er(trensal) single-ion molecular magnets adsorbed on graphene/Ru(0001) using X-ray photoemission electron microscopy (X-PEEM). By exploiting the elemental contrast at the erbium M 5 edge we observe the formation of molecular islands of homogeneous height with a lateral size of several micrometers. The graphene/Ru(0001) substrate exhibits two different signal levels in bright-field low-energy electron microscopy (LEEM) and in X-PEEM, which are ascribed to the presence of small-angle rotational domains of the graphene lattice. We find that the Er(trensal) molecules form islands solely on the bright areas, while the remaining dark areas are empty. Our results are important for the growth and study of the molecule-inorganic hybrid approach in spintronics schemes., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Recently π-d conjugated coordination polymers have received a lot of attention owing to their unique material properties, although synthesis of long and defect-free polymers remains challenging. Herein we introduce a novel on-surface synthesis of coordination polymers with quinoidal ligands under ultra-high vacuum conditions, which enables formation of flexible coordination polymers with lengths up to hundreds of nanometers. Moreover, this procedure allows the incorporation of different transition-metal atoms with four- or two-fold coordination. Remarkably, the two-fold coordination mode revealed the formation of wires constituted by (electronically) independent 12-membered antiaromatic macrocycles linked together through two C-C single bonds., (© 2020 Wiley-VCH GmbH.)

Functionalization of surfaces with derivatives of Buckminsterfullerene fragment molecules seems to be a promising approach toward bottom-up fabrication of carbon nanotube modified electrode surfaces. The modification of a Cu(100) surface with molecules of the buckybowl pentaindenocorannulene has been studied by means of scanning tunneling microscopy, carbon monoxide-modified noncontact atomic force microscopy, time-of-flight secondary mass spectrometry, and quantum chemical calculations. Two different adsorbate modes are identified, in which the majority is oriented such that the bowl cavity points away from the surface and the convex side is partially immersed into a four-atom vacancy in the Cu(100) surface. A minority is oriented such that the convex side points away from the surface with the five benzo tabs oriented basically parallel to the surface. Thermal annealing leads to hydrogenation and planarization of the molecules in two steps under specific C-C bond cleavage. The benzo tabs of the convex side up species serve as a hydrogen source. The final product has an open-shell electron structure that is quenched on the surface.

We perform on-surface synthesis of single-ion molecular magnets on an Ag(111) surface and characterize their morphology, chemistry, and magnetism. The first molecule we synthesize is TbPc 2 to enable comparison with chemically synthesized and subsequently surface adsorbed species. We demonstrate the formation of TbPc 2 with a yield close to 100% and show that on-surface synthesis leads to identical magnetic and morphological properties compared to the previously studied chemically synthesized species. Moreover, exposure of the surface adsorbed TbPc 2 molecules to air does not modify their magnetic and morphological properties. To demonstrate the versatility of our approach, we synthesize novel Tb double deckers using tert -butyl-substituted phthalocyanine (tbu-2H-Pc). The Tb(tbu-Pc) 2 molecules exhibit magnetic hysteresis and therefore are the first purely on-surface synthesized single ion magnet., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The stability of magnetic information stored in surface adsorbed single-molecule magnets is of critical interest for applications in nanoscale data storage or quantum computing. The present study combines X-ray magnetic circular dichroism, density functional theory and magnetization dynamics calculations to gain deep insight into the substrate dependent relevant magnetization relaxation mechanisms. X-ray magnetic circular dichroism reveals the opening of a butterfly-shaped magnetic hysteresis of DyPc 2 molecules on magnesium oxide and a closed loop on the bare silver substrate, while density functional theory shows that the molecules are only weakly adsorbed in both cases of magnesium oxide and silver. The enhanced magnetic stability of DyPc 2 on the oxide film, in conjunction with previous experiments on the TbPc 2 analogue, points to a general validity of the magnesium oxide induced stabilization effect. Magnetization dynamics calculations reveal that the enhanced magnetic stability of DyPc 2 and TbPc 2 on the oxide film is due to the suppression of two-phonon Raman relaxation processes. The results suggest that substrates with low phonon density of states are beneficial for the design of spintronics devices based on single-molecule magnets., Competing Interests: The authors declare no conflict of interest., (© 2019 The Authors. Published by WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim.)

The growth of carbon layers, defective graphene, and graphene by deposition of polycyclic aromatic hydrocarbons (PAHs) on Cu(111) is studied by scanning tunneling microscopy and X-ray photoelectron spectroscopy. Two different PAHs are used as starting materials: the buckybowl pentaindenocorannulene (PIC) which contains pentagonal rings and planar coronene (CR). For both precursors, with increasing sample temperature during deposition, porous carbon aggregates (350 °C), dense carbon layers (400-450 °C), disordered defective graphene (500 °C-550 °C), and extended graphene (≥600 °C) are obtained. No significant differences for defective graphene grown from PIC and CR are observed. C 1s X-ray photoelectron spectra of PIC and CR derived samples grown at 350-550 °C exhibit a characteristic C-Cu low binding energy component. Preparation at ≥600 °C eliminates this C-Cu species and only C-C bonded carbon remains., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Stable, single-nanometer thin, and free-standing two-dimensional layers with controlled molecular architectures are desired for several applications ranging from (opto-)electronic devices to nanoparticle and single-biomolecule characterization. It is, however, challenging to construct these stable single molecular layers via self-assembly, as the cohesion of those systems is ensured only by in-plane bonds. We herein demonstrate that relatively weak noncovalent bonds of limited directionality such as dipole-dipole (-CN⋅⋅⋅NC-) interactions act in a synergistic fashion to stabilize crystalline monomolecular layers of tetrafunctional calixarenes. The monolayers produced, demonstrated to be free-standing, display a well-defined atomic structure on the single-nanometer scale and are robust under a wide range of conditions including photon and electron radiation. This work opens up new avenues for the fabrication of robust, single-component, and free-standing layers via bottom-up self-assembly.

The on-surface synthesis of bisheptahelicene by Ullmann coupling of 9-bromoheptahelicene on Au(111) and its temperature-induced dehydrogenation is studied using temperature-programmed reaction spectroscopy and time-of-flight secondary ion mass spectrometry. Specific dehydrogenation products of bisheptahelicene after loss of 6, 8 and 10 hydrogen atoms are identified, corresponding to molecules having undergone Diels-Alder transformations and intramolecular C-C coupling reactions. By combining with atomic hydrogen produced by dehydrogenation, the Ullmann coupling side-product bromine desorbs as HBr. H 2 desorption emerges only after all Br has desorbed. Such characteristic behavior is explained by a kinetic model which explicitly considers the coverage of transient atomic H on the surface. Heating experiments performed with saturated layers of different Br-containing molecules reveal that the onset of HBr desorption depends strictly on the dehydrogenation step and therefore on the structure of the molecules.

The comparison of the self-assembly 9,9'-bisheptahelicene on the Au(111) surface, studied with scanning tunneling microscopy, with the self-assembly of the same species obtained by on-surface synthesis via Ullmann coupling from 9-bromoheptahelicene reveals a diastereomeric excess for the ( M, P)- meso-form of 50%. The stereoselectivity is explained by a topochemical effect, in which the surface-alignment of the starting material and the organometallic intermediate sterically favor the ( M, P)-transition state over the homochiral transition states.

The on-surface Ullmann coupling of 2,3-dibromo[4]helicene molecules is studied on Au(111) and Cu(111) surfaces. Bis-helicene and tris-helicene are identified with scanning tunnelling microscopy and X-ray photoelectron spectroscopy as reaction products. The produced star-shaped tris-helicenes self-assemble on Au(111) spontaneously into large homochiral domains.

Autocatalytic processes are important in many fields of science, including surface chemistry. A better understanding of its mechanisms may improve the current knowledge on heterogeneous catalysis. The thermally induced decomposition of eight different polycyclic aromatic hydrocarbons (PAHs) on a saturated monolayer of atomic oxygen on a Cu(100) surface is studied using temperature-programmed reaction spectroscopy (TPRS), X-ray photoelectron spectroscopy (XPS), and scanning tunneling microscopy (STM). 9-Bromo-heptahelicene decomposes autocatalytically in a narrow temperature range into CO 2 and H 2 O, while non-halogenated heptahelicene decomposes into the same products but does not show autocatalytic behavior. Fixation of the hydrocarbon to the surface via the organometallic bond after elimination of the bromine is identified as a prerequisite for the autocatalytic reaction mechanism. Of all the hydrocarbons studied, only those being sterically overcrowded decompose autocatalytically. Such an observation can be explained by facile dehydrogenation of the overcrowded PAHs. The reaction of such hydrogen with oxygen creates vacancies in the oxygen layer which act as active sites and catalyze further decomposition.

The adsorption of diastereoisomers of tartaric acid, namely, meso (R,S)-tartaric acid, (R,R)-tartaric acid, and the racemic mixture of (R,R) and (S,S) tartaric acid on the (111) surface of a copper single crystal has been studied by means of reflection-absorption IR Spectroscopy, X-ray photoelectron spectroscopy, low-energy electron diffraction, and thermal desorption spectroscopy. Two distinct adsorption modes are identified for all three adsorbate systems. All molecules undergo an identical thermally induced autocatalytic decomposition reaction above 510 K. The pure enantiomers show 2D chiral long-range ordered structures of opposite handedness., (© 2018 Wiley Periodicals, Inc.)

Quantum devices depend on addressable elements, which can be modified separately and in their mutual interaction. Self-assembly at surfaces, for example, formation of a porous (metal-) organic network, provides an ideal way to manufacture arrays of identical quantum boxes, arising in this case from the confinement of the electronic (Shockley) surface state within the pores. We show that the electronic quantum box state as well as the interbox coupling can be modified locally to a varying extent by a selective choice of adsorbates, here C 60 , interacting with the barrier. In view of the wealth of differently acting adsorbates, this approach allows for engineering quantum states in on-surface network architectures.

Surface-adsorbed macrocycles exhibit a number of interesting physical and chemical properties; many of them are determined by their transition-metal centers. The hierarchical exchange of the central metal atom in such surface-adsorbed complexes is demonstrated, specifically in the porphyrin-like macrocycle pyrphyrin adsorbed on Cu(111). Using scanning tunneling microscopy and X-ray photoelectron spectroscopy, we show that Cu as central metal atom is easily exchanged with Ni or Fe atoms supplied in trace amounts to the surface. Atom exchange of Ni centers with Fe atoms also occurs, with moderate yield. These results allow ranking the stability of the surface-adsorbed Cu, Ni, and Fe complexes. The fact that the atom exchange occurs at 423 K shows that surface-adsorbed macrocycles can be surprisingly easily transformed.

Realization of long-range magnetic order in surface-supported two-dimensional systems has been challenging, mainly due to the competition between fundamental magnetic interactions as the short-range Kondo effect and spin-stabilizing magnetic exchange interactions. Spin-bearing molecules on conducting substrates represent a rich platform to investigate the interplay of these fundamental magnetic interactions. Here we demonstrate the direct observation of long-range ferrimagnetic order emerging in a two-dimensional supramolecular Kondo lattice. The lattice consists of paramagnetic hexadeca-fluorinated iron phthalocyanine (FeFPc) and manganese phthalocyanine (MnPc) molecules co-assembled into a checkerboard pattern on single-crystalline Au(111) substrates. Remarkably, the remanent magnetic moments are oriented in the out-of-plane direction with significant contribution from orbital moments. First-principles calculations reveal that the FeFPc-MnPc antiferromagnetic nearest-neighbour coupling is mediated by the Ruderman-Kittel-Kasuya-Yosida exchange interaction via the Au substrate electronic states. Our findings suggest the use of molecular frameworks to engineer novel low-dimensional magnetically ordered materials and their application in molecular quantum devices.

We show that highly ordered two-dimensional (2D) chessboard arrays consisting of a periodic arrangement of two different molecules can be obtained by self-assembly of unsubstituted metal-phthalocyanines (metal-Pcs) on a suitable substrate serving as the template. Specifically, CuPc + MnPc and CuPc + CoPc mixtures sort into highly ordered Cu/Mn and Cu/Co chessboard arrays on the square p(10 × 10) reconstruction of bismuth on Cu(100). Such created bimolecular chessboard assemblies emerge from the site-specific interactions between the central transition-metal ions and the periodically reconstructed substrate. This work provides a conceptually new approach to induce 2D chessboard patterns in that no functionalization of the molecules is needed.

Regular arrays of single atoms with stable magnetization represent the ultimate limit of ultrahigh density storage media. Here we report a self-assembled superlattice of individual and noninteracting Dy atoms on graphene grown on Ir(111), with magnetic hysteresis up to 5.6 T and spin lifetime of 1000 s at 2.5 K. The observed magnetic stability is a consequence of the intrinsic low electron and phonon densities of graphene and the 6-fold symmetry of the adsorption site. Our array of single atom magnets has a density of 115 Tbit/inch 2 , defined by the periodicity of the graphene moiré pattern.

Ullmann coupling of chiral 2-bromo[4]helicene has been performed on a Cu(100) surface. Only homochiral 2,2'-bis[4]helicene as the product is observed using STM. Such stereoselectivity is based on the fact that the surface will favour a configuration with the central part of the molecule on the surface, causing the outer ends to spiral away from the surface.

TbPc2 single-molecule magnets adsorbed on a magnesium oxide tunnel barrier exhibit record magnetic remanence, record hysteresis opening, perfect out-of-plane alignment of the magnetic easy axes, and self-assembly into a well-ordered layer., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In Tb(Pc)2 single-molecule magnets, where Pc is phthalocyanine, adsorbed on magnesium oxide, the fluctuations of the terbium magnetic moment are strongly suppressed in contrast to the adsorption on silver. On page 5195, J. Dreiser and co-workers investigate that the molecules are perfectly organized by self-assembly, as seen in the scanning tunnelling microscopy image (top part of the design). The molecules are probed by circularly polarized X-rays depicted as green spirals., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A 2D array of electronically coupled quantum boxes is fabricated by means of on-surface self-assembly assuring ultimate precision of each box. The quantum states embedded in the boxes are configured by adsorbates, whose occupancy is controlled with atomic precision. The electronic interbox coupling can be maintained or significantly reduced by proper arrangement of empty and filled boxes., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We report magnetic hysteresis in Er clusters on Cu(111) starting from the size of three atoms. Combining X-ray magnetic circular dichroism, scanning tunneling microscopy, and mean-field nucleation theory, we determine the size-dependent magnetic properties of the Er clusters. Er atoms and dimers are paramagnetic, and their easy magnetization axes are oriented in-plane. In contrast, trimers and bigger clusters exhibit magnetic hysteresis at 2.5 K with a relaxation time of 2 min at 0.1 T and out-of-plane easy axis. This appearance of magnetic stability for trimers coincides with their enhanced structural stability.

We report on the antiferromagnetic exchange coupling between a submonolayer of Mn(II)-phthalocyanine molecules and a ferromagnetic Eu(II)-oxide thin film. The exchange energy is larger by nearly two orders of magnitude compared to previous studies involving oxidic substrates.

Condensation processes are of key importance in nature and play a fundamental role in chemistry and physics. Owing to size effects at the nanoscale, it is conceptually desired to experimentally probe the dependence of condensate structure on the number of constituents one by one. Here we present an approach to study a condensation process atom-by-atom with the scanning tunnelling microscope, which provides a direct real-space access with atomic precision to the aggregates formed in atomically defined 'quantum boxes'. Our analysis reveals the subtle interplay of competing directional and nondirectional interactions in the emergence of structure and provides unprecedented input for the structural comparison with quantum mechanical models. This approach focuses on-but is not limited to-the model case of xenon condensation and goes significantly beyond the well-established statistical size analysis of clusters in atomic or molecular beams by mass spectrometry.

We present a new class of on-surface covalent reactions, formed between diborylene-3,4,9,10-tetraaminoperylene and trimesic acid on Cu(111), which gives rise to a porous 2D-'sponge'. This aperiodic network allowed the investigation of the dependence of electron confinement effects upon pore size, shape and even in partial confinement.