Search

The interaction and tunneling conductance between oppositely located ends of coaxial carbon nanotubes are studied by the example of two (11,11) nanotubes with open ends terminated by hydrogen atoms. The Green function formalism is applied to determine the tunneling current through the nanotube ends as a function of the distance between the ends, relative orientation of the nanotubes and voltage applied. The energy favorable configuration of the coaxial nanotubes is obtained by the analysis of their interaction energy at different distances between the nanotube ends and angles of their relative rotation. Using these calculations, a general scheme of the force sensor based on the interaction between ends of coaxial nanotubes is proposed and the relation between the tunneling conductance and measured force is established for the considered nanotubes. The operational characteristics of this device as a magnetic field sensor based on measurements of the magnetic force acting on the coaxial nanotubes filled with magnetic endofullerenes are estimated., Comment: 9 pages, 8 figures

A new concept of an electromechanical nanodynamometer based on the relative displacement of layers of bilayer graphene is proposed. In this nanodynamometer, force acting on one of the graphene layers causes the relative displacement of this layer and related change of conductance between the layers. Such a force can be determined by measurements of the tunneling conductance between the layers. Dependences of the interlayer interaction energy and the conductance between the graphene layers on their relative position are calculated within the first-principles approach corrected for van der Waals interactions and the Bardeen method, respectively. The characteristics of the nanodynamometer are determined and its possible applications are discussed., Comment: 5 pages, 4 figures

The atomic and band structures of the (6,0) zigzag carbon nanotube at its axial elongation are calculated by semiempirical molecular orbital and by tight-binding methods. The ground state of the nanotube is found to have a Kekule structure with four types of bonds and difference between lengths of long and short bonds of about 0.005 nm. The structural phase transition is revealed at ~9% elongation, resulting in a quinoid structure with two types of bonds. This structural phase transition is followed by the transition from a narrow gap to moderate gap semiconductor. Validity of the semiempirical PM3 method is discussed., Comment: 7 pages, 8 figures

The changes of dynamical behaviour of a single fullerene molecule inside an armchair carbon nanotube caused by the structural Peierls transition in the nanotube are considered. The structures of the smallest C20 and Fe@C20 fullerenes are computed using the spin-polarized density functional theory. Significant changes of the barriers for motion along the nanotube axis and rotation of these fullerenes inside the (8,8) nanotube are found at the Peierls transition. It is shown that the coefficients of translational and rotational diffusions of these fullerenes inside the nanotube change by several orders of magnitude. The possibility of inverse orientational melting, i.e. with a decrease of temperature, for the systems under consideration is predicted., Comment: 9 pages, 6 figures, 1 table

We have analyzed the energetics of decay of the X^- trion (exciton + electron) on the assumption that the exciton and trion are independent excitations of a single two-dimensional semiconducting quantum well. For the first time, it has been shown that in filling a well with electrons from a selective donor-doped matrix, the binding energy of the trion (of the electron with the exciton) increases linearly with a shift of the Fermi level into the depth of the c band. This agrees with the well-known experimental data on the low-temperature radiative decay (photoluminescence) of trions in the heterostructures ZnSe/Zn_0.89Mg_0.11S_0.18Se_0.82 and CdTe/Cd_0.7Mg_0.3Te., Comment: 3 pages, 2 figures

Expressions for dependences of the pre-exponential factor \sigma_3 and the thermal activation energy \epsilon_3 of hopping electric conductivity of holes via boron atoms on the boron atom concentration N and the compensation ratio K are obtained in the quasiclassical approximation. It is assumed that the acceptors (boron atoms) in charge states (0) and (-1) and the donors that compensate them in the charge state (+1) form a nonstoichiometric simple cubic lattice with translational period R_h = [(1 + K)N]^{-1/3} within the crystalline matrix. A hopping event occurs only over the distance R_h at a thermally activated accidental coincidence of the acceptor levels in charge states (0) and (-1). Donors block the fraction K/(1 - K) of impurity lattice sites. The hole hopping conductivity is averaged over all possible orientations of the lattice with respect to the external electric field direction. It is supposed that an acceptor band is formed by Gaussian fluctuations of the potential energy of boron atoms in charge state (-1) due to Coulomb interaction only between the ions at distance R_h. The shift of the acceptor band towards the top of the valence band with increasing N due to screening (in the Debye--H\"uckel approximation) of the impurity ions by holes hopping via acceptor states was taken into account. The calculated values of \sigma_3(N) and \epsilon_3(N) for K \approx 0.25 agree well with known experimental data at the insulator side of the insulator--metal phase transition. The calculation is carried out at a temperature two times lower than the transition temperature from hole transport in v-band of diamond to hopping conductance via boron atoms., Comment: 6 pages, 2 figures

Structural and energy characteristics of the smallest magnetic endofullerene Fe@C20 have been calculated using the density functional theory approach. The ground state of Fe@C20 is found to be a septet state, and the magnetic moment of Fe@C20 is estimated to be 8 Bohr magnetons. Characteristics of an (8,8) carbon nanotube with a single Fe@C20 inside are studied in the framework of the semiempirical approach. The scheme of a magnetic nanorelay based on cantilevered nanotubes filled with magnetic endofullerenes is elaborated. The proposed nanorelay is turned on as a result of bending of nanotubes by a magnetic force. Operational characteristics of such a nanorelay based on (8,8) and (21,21) nanotubes fully filled with Fe@C20 are estimated and compared to the ones of a nanorelay made of a (21,21) nanotube fully filled with experimentally observed (Ho3N)@C80 with the magnetic moment of 21 Bohr magnetons. Room temperature operation of (21,21) nanotube based nanorelays is shown., Comment: 18 pages, 9 figures

The dependence of the interwall conductance on distance between walls and relative positions of walls are calculated at the low voltage by Bardeen method for (n,n)@(2n,2n) double-walled carbon nanotubes (DWCNTs) with n = 5, 6, ..., 10. The calculations show that interwall conductance does not depend on temperature (for T < 500 K) and current-voltage characteristic is linear. The conductance decreases by 6 orders of magnitude when the interwall distance is doubled. Thus, depending on the interwall distance, DWCNTs can be used as temperature stable nanoresistors or nanocapacitors., Comment: 6 pages, 6 figures

The Kekule structure of the ground state of (5,5) armchair carbon nanotube is revealed by semiempirical molecular orbital calculations. This structure has bonds with two different bond lengths, differing by 0.003 nm. The ground state has tripled (compared to undistorted case) translational period due to Peierls distortions. Two first order structural phase transitions controlled by the tension are predicted at zero temperature. These transitions correspond to 5% and 13% elongations of a uniaxially deformed (5,5) nanotube. The narrow gap semiconductor to metal transition is predicted at 5% elongation of the nanotube., Comment: 6 pages, 5 figures