Search

The morphologies and corona compositions in aggregates of mixtures of PS-b-PAA and PS-b-P4VP diblock copolymers are influenced by controllable assembly parameters such as water content, block copolymer molar ratios, and solvent effects as well as the hydrophilic block lengths and block length ratios. All these factors can affect the morphology of the aggregates as well as their corona composition, the latter especially in vesicles, where two interfaces are involved. The morphologies and corona compositions of the aggregates were investigated by transmission electron microscopy and electrophoretic mobility, respectively. They depend, to a large extent, on the solubility of P4VP and PAA in the given organic solvent (e.g., DMF, THF, or dioxane), which influences the coil dimensions of the hydrophilic chains. The water content affects both the size and the shape of the block copolymer aggregates as well as the corona composition. Water acts as a precipitant for the hydrophobic block in the common solvent and, therefore, its progressive addition to the solution changes the interaction parameter with the hydrophobic block. The block copolymer molar ratio has an effect on both the morphology and the corona composition of the aggregates. With increasing PS-b-P4VP content in the mixture, the morphology transforms gradually from large compound micelles (LCMs), through coexistence of LCMs and small spherical micelles (SSMs), and eventually to vesicles. As expected, the corona composition of the aggregates is also affected by the block copolymer molar ratio, and changes progressively from pure PAA to a mixture of PAA and P4VP and to pure P4VP with increasing PS-b-P4VP content. It is clear that the use of mixtures of the soluble chains offers the opportunity of fine-tuning the corona composition in block copolymer aggregates under assembly conditions.

The corona compositions and morphologies in aggregates of mixtures of amphiphilic polystyrene-block-poly(acrylic acid) (PS-b-PAA) and polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) diblock copolymers are influenced by controllable assembly parameters such as the hydrophilic block length and solution pH. The morphologies and corona compositions of the aggregates were investigated by transmission electron microscopy and electrophoretic mobility, respectively. When mineral acids or bases are present during aggregate formation, they can exert a strong influence on the corona composition. Morphology changes were also seen with changing pH, as well as changes in corona composition, specifically for vesicles. Because of complications introduced by the presence of ions, the general hypothesis that the external corona of the vesicles is composed of the longer chains, while the shorter chains form the inner corona, which is valid only in mixtures containing only nonionic chains without any additives (no acids or bases) or within a well-defined narrow pH range. In addition to the numerical block lengths and the pH, the solubility of the hydrophilic blocks can also influence the morphology and as well as the interfacial composition of vesicles; as the numerically longer chains become less soluble, they can contract and move to the interior, while the numerically shorter but more soluble chains go to the external corona. A remarkable morphological feature of the pH continuum is that for some compositions vesicles are observed in four distinct pH regions, separated by pH ranges in which other morphologies dominate. The effect of pH and microion content on coil dimensions of the PVP and PAA chains in the block copolymers is most likely responsible for the observed behavior.

Bactericidal filter papers offer the simplicity of gravity filtration to simultaneously eradicate microbial contaminants and particulates. We previously detailed the development of biocidal block copolymer micelles that could be immobilized on a filter paper to actively eradicate bacteria. Despite the many advantages offered by this system, its widespread use is hindered by its unknown mechanism of action which can result in non-reproducible outcomes. In this work, we sought to investigate the mechanism by which a certain percentage of Escherichia coli cells survived when passing through the bactericidal filter paper. Through the process of elimination, the possibility that the bacterial survival probability was controlled by the initial bacterial load or the existence of resistant sub-populations of E. coli was dismissed. It was observed that increasing the thickness or the number of layers of the filter significantly decreased bacterial survival probability for the biocidal filter paper but did not affect the efficiency of the blank filter paper (no biocide). The survival probability of bacteria passing through the antibacterial filter paper appeared to depend strongly on the number of collision between each bacterium and the biocide-loaded micelles. It was thus hypothesized that during each collision a certain number of biocide molecules were directly transferred from the hydrophobic core of the micelle to the bacterial lipid bilayer membrane. Therefore, each bacterium must encounter a certain number of collisions to take up enough biocide to kill the cell and cells that do not undergo the threshold number of collisions are expected to survive., (Copyright © 2014 Elsevier B.V. All rights reserved.)

The design, preparation, and properties of nanosized blackberry-like structures are described. These capsules are composed of two layers of individual block copolymer aggregates, relatively large core vesicles onto which is deposited a layer of smaller vesicles or micelles. The composition of the adjacent layers is such as to ensure strong electrostatic interactions between them. The core vesicles are typically composed of either PS-b-P4VP with a positively charged corona or of PS-b-PAA with a negatively charged corona, and are surrounded by a layer of smaller, oppositely charged block copolymer vesicles or micelles. These composite structures bear a strong resemblance to blackberries, hence the proposed name. The blackberry structures can be prepared in solution or on a flat surface, for example, a silicon wafer. Four compositional possibilities for the blackberries structures were studied, in which the positively or negatively charged core vesicles are covered either by a layer of oppositely charged micelles or by vesicles. These structures represent the earliest stage of a layer-by-layer approach of small spherical aggregates onto a larger spherical hollow core. The strong interaction between the contacting layers is achieved by electrostatic interactions or by complementary acid-base properties, for example, H-bonding. These multicompartmented capsules could be used potentially as delivery vehicles for multiple components; each layer of the capsules could be loaded with hydrophobic (in the core of the micelles or vesicle wall) or hydrophilic molecules (in the vesicle cavity). The overall size of such structures can vary, but in any case can be kept below 1 μm.

The design, preparation, and properties of planar multilayer structures composed of various combinations of sequentially deposited polyelectrolyte (PE) chains and self-assembled layers of individual block copolymer aggregates (vesicles, micelles, or large compound micelles (LCMs)) are described. The aggregates contain negatively or positively charged corona chains while the PE multilayers contain alternating polyanionic or polycationic chains deposited on silicon wafers. The final structures consist of combinations of layers of various charged species: multilayers of alternating PEs of poly(allyl hydrochloride) (PAH) and poly(acrylic acid) (PAA) as well as vesicles, micelles, or large compound micelles of ionized poly(styrene)-b-poly(4-vinylpyridine) (PS-b-P4VP) or of poly(styrene)-b-poly(acrylic acid) (PS-b-PAA). Two types of layer-by-layer (LbL) multilayer structures were studied: individual aggregate layers sandwiched between PE multilayers and layers of individual aggregates of various morphologies and of different corona chain charges, deposited on top of each other without intermediate multilayers or individual layers of PEs. The strong interactions between the successive layers are achieved mainly by electrostatic attraction between the oppositely charged layers. The planar LbL multilayers containing block copolymer aggregates could, potentially, be used as carriers for multiple functional components; each aggregate layer could be loaded with hydrophobic (in the core of the micelles, LCMs, or vesicle walls) or hydrophilic functional molecules (in the vesicular cavities). The overall thickness of such planar LbL multilayers can be controlled precisely and can vary from tens of nanometers to several micrometers depending on the number of layers, the sizes of the aggregates, and the complexity of the structure.

Biocide emulsions stabilized with various stabilizing agents were prepared and characterized, and their efficiency in bacteria deactivation was evaluated. A number of stabilizing agents were tested for their stabilizing effect on emulsions of thiocyanomethylthiobenzothiazole (TCMTB) biocide. Two agents, the most successful in stabilizing the biocide, were chosen for further studies: high molecular weight polyethyleneimine (PEI) and an amphiphilic block copolymer of poly(caprolactone)-b-poly(acrylic acid) (PCL(33)-b-PAA(33)). The emulsion droplet sizes varied between 325 and 500 nm. Deactivation of bacteria was studied by exposing E. coli ATCC 11229 bacteria dispersions to emulsions stabilized by positively charged PEI or negatively charged PCL-b-PAA micelles and by measuring their absorbance; E. coli do not grow with time in the presence of biocide emulsions. PEI molecules alone act as biocide and deactivate the bacteria. PCL-b-PAA micelles as stabilizing agent do not affect the growth of the E. coli ; bacteria are deactivated by TCMTB released from the emulsion droplets. The kinetics of emulsion dissolution studies revealed for both stabilizing agents a decrease in droplet size with time while the emulsions were subjected to dialysis. The biocide was released from the emulsions within ∼250 min; the droplet shells consist mostly of PEI or PCL-b-PAA insoluble complexes with the biocide, which do not dissolve during dialysis. SEM images confirm the presence of residual crumbled shells with holes after 24 h of dialysis., (© 2011 American Chemical Society)

Block copolymer micelles with bactericidal properties were designed to deactivate pathogens such as E. coli bacteria. The micelles of PS-b-PAA and PS-b-P4VP block copolymers were loaded with biocides TCMTB or TCN up to 20 or 30 wt.-%, depending on the type of antibacterial agent. Bacteria were exposed to loaded micelles and bacterial deactivation was evaluated. The micelles loaded with TCN are bactericidal; bacteria are killed in less than two minutes of exposure. The most likely interpretation of the data is that the biocide is transferred to the bacteria by repeated micelle/bacteria contacts, and not via the solution., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The kinetics of loading of polystyrene197-block-poly(acrylic acid)47 (PS197-b-PAA47) micelles, suspended in water, with thiocyanomethylthiobenzothiazole biocide and its subsequent release were investigated. Loading of the micelles was found to be a two-step process. First, the surface of the PS core of the micelles is saturated with biocide, with a rate determined by the transfer of solid biocide to micelles during transient micelle-biocide contacts. Next, the biocide penetrates as a front into the micelles, lowering the Tg in the process (non-Fickian case II diffusion). The slow rate of release is governed by the height of the energy barrier that a biocide molecule must overcome to pass from PS into water, resulting in a uniform biocide concentration within the micelle, until Tg is increased to the point that diffusion inside the micelles becomes very slow. Maximum loading of biocide into micelles is approximately 30% (w/w) and is achieved in 1 h. From partition experiments, it can be concluded that the biocide has a similar preference for polystyrene as for ethylbenzene over water, implying that the maximum loading is governed by thermodynamics.