Search

The viscosity values of CO2–dimethylphormamide, chloroform, methanol, isopropanol, ethyl acetate, acetone, and dimethyl sulfoxide mixtures were measured at a pressure of 150 bar and a temperature of 313 K. The correlation of the mean size of levofloxacin hydrochloride and malonic acid particles precipitated using the SAS method with the viscosity of the used CO2–solvent mixtures is shown. The high viscosity of the mixtures leads to slower mixing of the solution and the antisolvent. Therefore, crystallization occurs at large fractions of the solvent, and as a consequence at a lower supersaturation. This causes the formation of larger particles when using more viscous solvents in SAS. [ABSTRACT FROM AUTHOR]

The dry reforming of methane to syngas (DRM) is of increasing significance concerning, first, the production of raw materials for commercial organic/petrochemical syntheses and for hydrogen energetic, and, second, the utilization of two most harmful greenhouse gases. Herein, new SmCoO3-based DRM catalysts derived from heterometallic precursors and operated without preliminary reduction are reported. For the first time, the effect of supercritical fluids-assisted modification of the SmCoO3-derived catalysts combined with the re-oxidation of spent catalysts to SmCoO3 onto its long-term performance was studied. In particular, the modification of heterometallic precursors by supercritical antisolvent precipitation (SAS) considerably decreases coke formation upon the exploitation of the derived SmCoO3 sample. Moreover, the re-oxidation of the corresponding spent catalysts followed by pre-heating under N2 affords catalysts that stably provide syngas yields of 88–95% for at least 41 h at 900 °C. The achieved yields are among the highest ones currently reported for DRM catalysts derived from both LnMO3 perovskites and related oxides. The origins of such good performance are discussed. Given the simplicity and availability of all the applied methods and chemicals, this result opens prospects for exploiting SAS in the design of efficient DRM catalysts. [ABSTRACT FROM AUTHOR]

The dry reforming of methane to syngas (DRM) is of increasing significance concerning, first, the production of raw materials for commercial organic/petrochemical syntheses and for hydrogen energetic, and, second, the utilization of two most harmful greenhouse gases. Herein, new SmCoO 3 -based DRM catalysts derived from heterometallic precursors and operated without preliminary reduction are reported. For the first time, the effect of supercritical fluids-assisted modification of the SmCoO 3 -derived catalysts combined with the re-oxidation of spent catalysts to SmCoO 3 onto its long-term performance was studied. In particular, the modification of heterometallic precursors by supercritical antisolvent precipitation (SAS) considerably decreases coke formation upon the exploitation of the derived SmCoO 3 sample. Moreover, the re-oxidation of the corresponding spent catalysts followed by pre-heating under N 2 affords catalysts that stably provide syngas yields of 88-95% for at least 41 h at 900 °C. The achieved yields are among the highest ones currently reported for DRM catalysts derived from both LnMO 3 perovskites and related oxides. The origins of such good performance are discussed. Given the simplicity and availability of all the applied methods and chemicals, this result opens prospects for exploiting SAS in the design of efficient DRM catalysts.