Search

Photocatalysts able to trigger the production of singlet oxygen species are the topic of intense research efforts in organic synthesis. Yet, challenges still exist in improving their activity and optimizing their use. Herein, we exploited the benefits of plasmonic nanoparticles to boost the activity of such photocatalysts via an antenna effect in the visible range. We synthesized silica-coated silver nanoparticles (Ag@SiO 2 NPs), with silica shells which thicknesses ranged from 7 to 45 nm. We showed that they served as plasmonically active supports for tris(bipyridine)ruthenium(II), [Ru(bpy) 3 ] 2+ , and demonstrated an enhanced catalytic activity under white light-emitting diode (LED) irradiation for citronellol oxidation, a key step in the commercial production of rose oxide fragrance. A maximum enhancement of the plasmon-mediated reactivity of approximately 3-fold was observed with a 28 nm silica layer along with a 4-fold enhancement in the emission intensity of the photocatalyst. Using electron energy loss spectroscopy (EELS) and boundary element method simulations, we mapped the decay of the plasmonic signal around the Ag core and provided a rationale for the observed catalytic enhancement. This work provides a systematic analysis of the promising properties of plasmonic NPs used as catalysis-enhancing supports for common homogeneous photocatalysts and a framework for the successful design of such systems in the context of organic transformations.

The coronavirus disease 2019 pandemic presents unprecedented challenges for the health care system. The pressure on health care staff continues to intensify, accentuated by the confinement (lockdown) of the population and the unprecedented duration of this emergency. Separately and especially together, overwork, degraded conditions of care because of the never-ending emergency, and the risk of exposure to the virus can lead to acute psychological distress or signs of burnout. This original program was developed at Cochin Hospital in Paris, France to prevent these potentially dramatic psychological consequences, support the medical staff, and identify those most affected to offer them specific care. A program and a space for relaxation and support for hospital caregivers by hospital caregivers, the Port Royal Bulle (the Bubble) offers these workers help in decompression and relaxation. It combines a warm and caring welcome that promotes attention, listening, conversations, and exchanges as needed, empathetic support, and the ability to participate in soothing, relaxing, or low-impact physical activities. It takes care of caregivers. The Bubble is a program that is simple to set up and that appears to meet professionals' expectations. Making it permanent and enlarging its scale, as a complement to existing programs, might help to support health care personnel in their work., (Copyright © 2020 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.)

Electron tomography has been widely applied to three-dimensional (3D) morphology characterization and chemical analysis at the nanoscale. A HAADF-EDS bimodal tomographic (HEBT) reconstruction technique has been developed to extract high resolution element-specific information. However, the reconstructed elemental maps cannot be directly converted to quantitative compositional information. In this work, we propose a quantification approach for obtaining elemental weight fraction maps from the HEBT reconstruction technique using the physical parameters extracted from a Monte Carlo code, MC X-ray. A similar quantification approach is proposed for the EDS-STEM tomographic reconstruction. The performance of the two quantitative reconstruction methods, using the simultaneous iterative reconstruction technique, are evaluated and compared for a simulated dataset of a two-dimensional phantom sample. The effects of the reconstruction parameters including the number of iterations and the weight of the HAADF signal are discussed. Finally, the two approaches are applied to an experimental dataset to show the 3D structure and quantitative elemental maps of a particle of flux melted metal-organic framework glass., (Copyright © 2020 Elsevier B.V. All rights reserved.)

A method of calculating the magnitude of the core hole screening of lithium materials is implemented for the simulation of Energy Loss Near Edge Structure (ELNES). ELNES is calculated for a range of lithium materials resulting in improved agreement between calculation and experiment. The technique uses linear response theory to relate the electron density to the core hole shielding contribution from the valence electrons in a crystal. This contribution is then implemented via a non-integer core hole in final state rule calculations., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Characterising the impact of lithium additions in the precipitation sequence in Al-Li-Cu alloys is important to control the strengthening of the final material. Since now, transmission electron microscopy (TEM) at high beam voltage has been the technique of choice to monitor the size and spatial distribution of δ' precipitates (Al 3 Li). Here we report on the imaging of the δ' phase in such alloys using backscattered electrons (BSE) and low accelerating voltage in a high-resolution field-emission scanning electron microscope. By applying low-energy Ar + ion milling to the surface after mechanical polishing (MP), the MP-induced corroded layers were efficiently removed and permitted the δ's to be visible with a limited impact on the observed microstructure. The resulting BSE contrast between the δ's and the Al matrix was compared with that obtained using Monte Carlo modelling. The artefacts possibly resulting from the sample preparation procedure were reviewed and discussed and permitted to confirm that these precipitates were effectively the metastable δ's. The method described in this report necessitates less intensive sample preparation than that required for TEM and provides a much larger field of view and an easily interpretable contrast compared to the transmission techniques., (© 2017 The Authors Journal of Microscopy © 2017 Royal Microscopical Society.)

Main Conclusion: Quantitative neutron imaging is a promising technique to investigate leaf water flow and transpiration in real time and has perspectives towards studies of plant response to environmental conditions and plant water stress. The leaf hydraulic architecture is a key determinant of plant sap transport and plant-atmosphere exchange processes. Non-destructive imaging with neutrons shows large potential for unveiling the complex internal features of the venation network and the transport therein. However, it was only used for two-dimensional imaging without addressing flow dynamics and was still unsuccessful in accurate quantification of the amount of water. Quantitative neutron imaging was used to investigate, for the first time, the water distribution in veins and lamina, the three-dimensional venation architecture and sap flow dynamics in leaves. The latter was visualised using D2O as a contrast liquid. A high dynamic resolution was obtained by using cold neutrons and imaging relied on radiography (2D) as well as tomography (3D). The principle of the technique was shown for detached leaves, but can be applied to in vivo leaves as well. The venation network architecture and the water distribution in the veins and lamina unveiled clear differences between plant species. The leaf water content could be successfully quantified, though still included the contribution of the leaf dry matter. The flow measurements exposed the hierarchical structure of the water transport pathways, and an accurate quantification of the absolute amount of water uptake in the leaf was possible. Particular advantages of neutron imaging, as compared to X-ray imaging, were identified. Quantitative neutron imaging is a promising technique to investigate leaf water flow and transpiration in real time and has perspectives towards studies of plant response to environmental conditions and plant water stress.