Search

Molybdenum sulfide (MoS2) has attracted significant attention due to its great potential as a low-cost and efficient catalyst for the hydrogen evolution reaction. Developing a facile, easily upscalable, and inexpensive approach to produce catalytically active nanostructured MoS2 with a high yield would significantly advance its practical application. Colloidal synthesis offers several advantages over other preparation techniques to overcome the low reaction yield of exfoliation and drawbacks of expensive equipment and processes used in chemical vapor deposition. In this work, we report an efficient synthesis of alloyed RexMo1−xS2 nanoflakes with an enlarged interlayer distance, among which the composition Re0.55Mo0.45S2 exhibits excellent catalytic performance with overpotentials as low as 79 mV at 10 mA/cm2 and a small Tafel slope of 42 mV/dec. Density functional theory calculations prove that enlarging the distance between layers in the RexMo1−xS2 alloy can greatly improve its catalytic performance due to a significantly reduced free energy of hydrogen adsorption. The developed approach paves the way to design advanced transition metal dichalcogenide-based catalysts for hydrogen evolution and to promote their large-scale practical application.

With the merits of quantum dots (QDs) (e.g., high molar extinction coefficient, strong visible light absorption, large specific surface area, and abundant functional surface active sites) and aerogels (e.g., self-supported architectures, porous network), semiconductor QD aerogels show great prospect in photocatalytic applications. However, typical gelation methods rely on oxidative treatments of QDs. Moreover, the remaining organic ligands (e.g., mercaptoacids) are still present on the surface of gels. Both these factors inhibit the activity of such photocatalysts, hampering their widespread use. Herein, we present a facile 3D assembly of II−VI semiconductor QDs capped with inorganic (NH4)2S ligands into aerogels using H2O as a dispersion solvent. Without any sacrificial agents, the resulting CdSe QD aerogels achieve a high CO generation rate of 15 μmol g-1 h-1, which is 12-fold higher than that of pristine-aggregated QD powders. Our work not only provides a facile strategy to fabricate QD aerogels but also offers a platform for designing advanced aerogel-based photocatalysts.

Cadmium chalcogenide nanoplatelets (NPLs) are established as promising materials for a wide variety of optoelectronic applications due to their properties surpassing in many aspects counterpart nanocrystals (NCs) with other shapes. Most of these features arise from strong quantum confinement in the direction of thickness which can be tuned with precision down to one monolayer. However, atomic smoothness of their basal planes and hence the ability to change the NPL thickness only in discrete steps prevent precise tuning of absorption and photoluminescence spectra unlike in the case of quantum dots. Preparation of alloyed NCs provides a potential solution to this problem, but it is complicated by the different reactivity of chalcogenide sources, which becomes even more restrictive in the case of NPLs, since they are more sensitive to alterations of reaction conditions. In this work, we overcome this obstacle by employing highly reactive stearoyl sulfide and selenide as chalcogen sources, which enable straightforward variation of the NPLs composition and thickness by changing the ratio of chalcogen precursors and reaction temperature, respectively. Alloyed CdSexS1-x NPLs obtained exhibit tunable absorption and photoluminescence bands covering the blue-green region from 380 to 520 nm with bright band-edge emission and quantum yields of ~30–50 % due to their relatively small lateral size enabled by a much finer control of the lateral growth.

The article deals with methodological issues of the use of the main provisions of an integrated approach to the company's economic security system, taking into account its system characteristics, content and development directions. The results obtained are characterized by a number of determining factor components of the company's protection mechanism in the context of using modern engineering tools that allow evaluating the effectiveness of protective measures with access to system-forming property indicators. For the purpose of practical use of the methodological provisions presented in the work author's computer programs have been developed.

We report on a near-infrared (NIR) emitting semiconductor nanocrystal (NC) heterostructure with tunable optical properties. This heterostructure is built of two different semiconductor sections in ...

The material-efficient monolayers of transition-metal dichalcogenides (TMDs) are a promising class of ultrathin nanomaterials with properties ranging from insulating through semiconducting to metallic, opening a wide variety of their potential applications from catalysis and energy storage to optoelectronics, spintronics, and valleytronics. In particular, TMDs have a great potential as emerging inexpensive alternatives to noble metal-based catalysts in electrochemical hydrogen evolution. Herein, we report a straightforward, low-cost, and general colloidal synthesis of various 2D transition-metal disulfide nanomaterials, such as MoS2, WS2, NiSx, FeSx, and VS2, in the absence of organic ligands. This new preparation route provides many benefits including relatively mild reaction conditions, high reproducibility, high yields, easy upscaling, no post-thermal annealing/treatment steps to enhance the catalytic activity, and, finally, especially for molybdenum disulfide nanosheets, high activity in the hydrogen evolution reaction. To underline the universal application of the synthesis, we prepared mixed CoxMo1-xS2 nanosheets in one step to optimize the catalytic activity of pure undoped MoS2, which resulted in an enhanced hydrogen evolution reaction performance characterized by onset potentials as low as 134 mV and small Tafel slopes of 55 mV/dec.

Ternary and quaternary colloidal nanocrystals (NCs) based on I−III−VI group semiconductors are promising low-toxic luminescent materials attracting huge interest as alternatives to cadmium- and lead-chalcogenide-based NCs. Despite significant progress in the synthesis of three-dimensionally confined quantum dots based on I−III−VI semiconductors with intensive photoluminescence (PL) in a broad spectral range, all attempts to prepare one-dimensionally confined nanoplatelets (NPLs) or nanosheets have resulted in rather nonemitting two-dimensional (2D) NCs. Since 2D NCs of the II−VI group exhibit unique anisotropic optical properties, exploring synthetic strategies to obtain 2D I−III−VI-based NPLs might also reveal interesting optical and electronic features. In this work, we demonstrate the synthesis of luminescent In-rich Cu−Zn−In−S (CZIS) NPLs using a one-pot approach. The synthesis includes the formation of Cu−In−S NPLs from In2S3 seeds, followed by the incorporation of zinc to form quaternary NPLs with improved stability and optical properties. The synthetic strategy implemented results in the formation of ∼1 nm thick NPLs with lateral sizes of ∼30 × 10 nm2 and a tetragonal crystal structure. As-synthesized NPLs are stable at ambient conditions and demonstrate PL in the range of 700−800 nm with a large Stokes shift. An additional shell of ZnS grown on CZIS NPLs resulted in the enhancement of their PL quantum yield reaching 29%.

Recently, colloidal semiconductor nanocrystals (NCs) are finding more and more applications in optoelectronic devices. Their usage, however, is still very far from the great potential already demonstrated in many fields owing to their unique features. While researchers are still struggling to achieve a wider gamut of different semiconductor nanomaterials with more controllable properties, the library of already existing candidates is large enough to harness their potential. Modification of well-studied semiconductor NCs by means of their chemical transformations can greatly advance their practical exploitation. In this Perspective, the main types of chemical transformations represented by ligand and cation exchange reactions and their recent examples are summarized. While ligand exchange is used to adjust the surface of a semiconductor NC, cation exchange allows us to engineer its core composition. Both approaches greatly extend the range of properties of the resulting nanomaterials, advancing their further incorporation into optoelectronic devices.

It is impractical to plan the further work of the company without taking into account analytical data for previous production periods. Analytical accounting data allows managers to build a company's strategy or make changes to an existing development plan. The importance of accounting for the enterprise plays a large role at the planning stage of the further business strategy. A competent manager studies accounting data before making the next decision regarding the company's finances. The easiest way to streamline accounting documents and eliminate errors in it is to conduct an internal audit. Such an audit will protect the company from possible fines and problems with tax audits. It will help optimize accounting and document flow, and simplify relations with banks and counterparties. Economic analysis aims to turn economic and non-economic information into useful information for decision making. Logical processing, study, generalization of facts, their systematization, conclusions, proposals, search for reserves - all these tasks are solved within the framework of economic analysis, which is designed to ensure the validity of management decisions and increase its effectiveness. This monograph is a collective work of teachers and students of the Department of Economic Security, Accounting and Law of the Don State Technical University. It is devoted to the consideration of certain issues of accounting, audit and economic analysis at the enterprise in modern conditions.

Nanocrystal micro/nanoarrays with multiplexed functionalities are of broad interest in the field of nanophotonics, cellular dynamics, and biosensing due to their tunable electrical and optical properties. This work focuses on the multicolor patterning of two-dimensional nanoplatelets (NPLs) via two sequential self-assembly and direct electron-beam lithography steps. By using scanning electron microscopy, atomic force microscopy, and fluorescence microscopy, we demonstrate the successful fabrication of fluorescent nanoarrays with a thickness of only two or three monolayers (7-11 nm) and a feature line width of ∼40 nm, which is three to four NPLs wide. To this end, first, large-area thin films of red-emitting CdSe/ZnyCd1-yS and green-emitting CdSe1-xSx/ZnyCd1-yS core/shell NPLs are fabricated based on Langmuir-type self-assembly at the liquid/air interface. By varying the concentration of ligands in the subphase, we investigate the effect of interaction potential on the film's final characteristics to prepare thin superlattices suitable for the patterning step. Equipped with the ability to fabricate a uniform superlattice with a controlled thickness, we next perform nanopatterning on a thin film of NPLs utilizing a direct electron-beam lithography (EBL) technique. The effect of acceleration voltage, aperture size, and e-beam dosage on the nanopattern's resolution and fidelity is investigated for both of the presented NPLs. After successfully optimizing EBL parameters to fabricate single-color nanopatterns, we finally focus on fabricating multicolor patterns. The obtained micro/nanoarrays provide us with an innovative experimental platform to investigate biological interactions as well as Forster resonance energy transfer.

Investigation of the influence of the nanocrystal (NC) surface chemistry on the (opto)electronic properties of NC-based thin films is of paramount importance for their further application in variou...

We introduce new oxygen- and moisture-proof polymer matrixes based on polyisobutylene (PIB) and its block copolymer with styrene [poly(styrene-block-isobutylene-block-styrene), PSt-b-PIB-b-PSt] for...

Purpose: We initiated this research to develop methodological recommendations to facilitate the application of the major provisions of an integrated approach to ensure the economic security system of an enterprise, taking into account its system characteristics, content, and directions of development.

We report a synthesis route to two-dimensional PbSe, HgSe, ZnSe, SnSe, and Cu-Zn-Sn-Se (CZTSe) nanomaterials based on cation exchange (CE) reactions. This approach includes two steps: it starts with the synthesis of hexagonal, up to several micrometers large yet approx. 5 nm-thick CuSe nanosheets (NSs), followed by CE of the host copper ions with the desired guest cation (Pb2+, Hg2+, Zn2+, or Sn4+). In the case of CZTSe, both guest cations can be added simultaneously since the variation of the guest cation ratio and reaction time can lead to various compositions. Mild reaction conditions allow for a preservation of the size and the 2D shape of the parent NSs accompanied by corresponding changes in their crystal structure. We furthermore demonstrate that the crystal structure of CuSe NSs can be rearranged even without addition of guest cations in the presence of tri-n-octylphosphine. Thus, the obtained NSs were further subjected to ligand exchange reactions in order to replace insulating bulky organic molecules on their surface with compact iodide and sulfide ions, a step crucial for the application of nanomaterials in (opto)electronic devices. The resulting NS dispersions were processed into thin films by spray-coating onto commercially available interdigitated platinum electrodes. Light response measurements of PbSe and CZTSe NS-films demonstrated their potential for applications as light-sensitive materials in photodetection or photovoltaics.

Cation exchange emerged as a versatile tool to obtain a variety of nanocrystals not yet available via a direct synthesis. Reduced reaction times and moderate temperatures make the method compatible with anisotropic nanoplatelets (NPLs). However, the subtle thermodynamic and kinetic factors governing the exchange require careful control over the reaction parameters to prevent unwanted restructuring. Here, we capitalize on the research success of CdSe NPLs by transforming them into PbSe NPLs suitable for optoelectronic applications. In a two-phase mixture of hexane/Nmethylformamide, the oleate-capped CdSe NPLs simultaneously undergo a ligand exchange to NH4I and a cation exchange reaction to PbSe. Their morphology and crystal structure are well-preserved as evidenced by electron microscopy and powder X-ray diffraction. We demonstrate the successful ligand exchange and associated electronic coupling of individual NPLs by fabricating a simple photodetector via spray-coating on a commercial substrate. Its optoelectronic characterization reveals a fast light response at low operational voltages.

Funding: This work was supported by the EU Horizon 2020 Project MiLEDi (779373) and by the Belarusian Republican Foundation for Fundamental Research (grant X21MC-007). D. I. Shiman, E. Ksendzov, E. A. Bolotina, and S. V. Kostjuk acknowledge the support by the Erasmus+ Traineeship Programme for Higher Education. Photoluminescent quantum dots (QDs) are a prominent example of nanomaterials used in practical applications, especially in light-emitting and light-converting devices. Most of the current applications of QDs require formation of thin films or their incorporation in solid matrices. The choice of an appropriate host material capable of preventing QDs from degradation and developing a process of uniform incorporation of QDs in the matrix have become essential scientific and technological challenges. In this work, we developed a method of uniform incorporation of Cu–Zn–In–S (CZIS) QDs into a highly protective cross-linked polyisobutylene (PIB) matrix with high chemical resistance and low gas permeability. Our approach involves the synthesis of a methacrylate-terminated three-arm star-shaped PIB oligomeric precursor capable of quick formation of a robust 3D polymer network upon exposure to UV-light, as well as the design of a special ligand introducing short PIB chains onto the surface of the QDs, thus providing compatibility with the matrix. The obtained cross-linked QDs-in-polymer composites underwent a complex photostability test in air and under vacuum as well as a chemical stability test. These tests found that CZIS QDs in a cross-linked PIB matrix demonstrated excellent photo- and chemical stability when compared to identical QDs in widely used polyacrylate-based matrices. These results make the composites developed excellent materials for the fabrication of robust, stable and durable transparent light conversion layers. Publisher PDF

In this work we present a technique of incorporation of semiconductor CdTe nanocrystals (NCs) into metal oxide matrices prepared by inorganic sol-gel method. As the matrices, we chose alumina and aluminum tin oxide, which are optically transparent in the visible region. Among them the first is electrically insulating, while the second is conductive and thus can be used in optoelectronic devices. We found optimal synthetic parameters allowing us to maintain optical properties of the NCs in both matrices even after heating up to 150°C in air. Therefore, in our approach we overcame a common problem of degradation of the optical properties of semiconductor NCs in oxide matrices as a result of the incorporation and subsequent interaction with the matrix. The resulting materials were characterized in detail from the point of view of their optical and structural properties. Based on the results obtained, we suggest the formation mechanism of these materials. Semiconductor NCs embedded in robust and optically transparent metal oxides offer promising applications in optical switching, optical filtering, waveguides, light emitting diodes, and solar concentrators.

In the past decades cadmium-free quantum dots (QDs), among which are quaternary colloidal Cu-Zn-In-S/ZnS (CZIS/ZnS) core/shell nanocrystals (NCs), have attracted great scientific interest. Particularly, their low toxicity and the possibility to tune their photoluminescence (PL) properties by varying the composition in the multicomponent system make them highly attractive for applications in light-emitting diodes (LEDs). Thus, the demands for high quality CZIS/ZnS QDs and methods to process them into bulk materials stimulate investigations of these nanomaterials. Herein, we demonstrate the synthesis of CZIS/ZnS core/shell NCs via a surfactant induced nucleation process, which emit in various colors covering the range from 520 nm to 620 nm possessing high photoluminescence quantum yields (PLQYs) up to 47%. Furthermore, the as synthesized NCs were successfully integrated into two different salt matrices [Na2B4O7 (Borax) and LiCl] using two different approaches. The commonly used incorporation of the NCs into Borax salt led to salt crystals emitting from 540 nm to 600 nm with PLQYs up to 24%. By encapsulating the QDs into LiCl, brightly emitting NCs-in-LiCl powders with the PL covering a range from 520 nm to 650 nm with PLQYs of up to 14% were obtained. As a proof of concept, the fabrication of a color conversion LED using NCs encapsulated into LiCl demonstrated the applicability of the encapsulated NCs.

We present a general strategy for a facile synthesis of complex multifunctional nanoscale materials via colloidal atomic layer deposition (c-ALD). The c-ALD technique is based on self-limiting half-reactions of ionic precursors on the surface of a nanocrystal (NC) occurring at room temperature. Using this technique, uniform layers of CdS and ZnS semiconductor shells were epitaxially grown on CdSe semiconductor cores with different shell combinations, leading to the precise control of the optical properties of these heterostructures. All core-shell multicomponent nanoparticles preserve narrow size distributions, phase crystallinity, and shape homogeneity of the initial NCs. Furthermore, we attempted to extend the toolbox of the c-ALD to combine materials with intrinsically different properties, such as Au/CdS core/shell structures with substantial lattice mismatch. The results presented in this work demonstrate great opportunities for creating functional materials with programmable properties for electronics and optoelectronics.

Stoichiometric Cu2Se nanocrystals were synthesized in either cubic or hexagonal (metastable) crystal structures and used as the host material in cation exchange reactions with Pb2+ ions. Even if the final product of the exchange, in both cases, was rock-salt PbSe nanocrystals, we show here that the crystal structure of the starting nanocrystals has a strong influence on the exchange pathway. The exposure of cubic Cu2Se nanocrystals to Pb2+ cations led to the initial formation of PbSe unselectively on the overall surface of the host nanocrystals, generating Cu2Se@PbSe core@shell nano-heterostructures. The formation of such intermediates was attributed to the low diffusivity of Pb2+ ions inside the host lattice and to the absence of preferred entry points in cubic Cu2Se. On the other hand, in hexagonal Cu2Se nanocrystals, the entrance of Pb2+ ions generated PbSe stripes "sandwiched" in between hexagonal Cu2Se domains. These peculiar heterostructures formed as a consequence of the preferential diffusion of Pb2+ ions through specific (a, b) planes of the hexagonal Cu2Se structure, which are characterized by almost empty octahedral sites. Our findings suggest that the morphology of the nanoheterostructures, formed upon partial cation exchange reactions, is intimately connected not only to the NC host material, but also to its crystal structure.

A size-selected series of water-soluble luminescent Ag–In–S (AIS) and core/shell AIS/ZnS quantum dots (QDs) were produced by a precipitation technique. Up to 10–11 fractions of size-selected AIS (AIS/ZnS) QDs emitting in a broad color range from deep-red to bluish-green were isolated with the photoluminescence (PL) quantum yield reaching 47% for intermediate fractions. The size of the isolated AIS (AIS/ZnS) QDs varied from ∼2 to ∼3.5 nm at a roughly constant chemical composition of the particles throughout the fractions as shown by the X-ray photoelectron spectroscopy. The decrease of the mean AIS QD size in consecutive fractions was accompanied by an increase of the structural QD imperfection/disorder as deduced from a notable Urbach absorption “tail” below the fundamental absorption edge. The Urbach energy increased from 90–100 meV for the largest QDs up to 350 meV for the smallest QDs, indicating a broadening of the distribution of sub-bandgap states. Both the Urbach energy and the PL bandwidth of the ...

Nanoscale materials have long promised to revolutionize science and technology, with claims being sustained by both the advances in their fabrication and by the many fundamental studies that have been carried out to date, which have revealed fascinating properties when materials dimensions shrink all the way down to a few hundreds/thousands of atoms. In this ongoing hype, on one side we have the futuristic views and promises of ubiquitous devices in which the operating units will be eventually scaled down to individual atoms or molecules. On the other side, we have the more realistic (and already unfolding) scenario represented by nanoscale materials making their way in a wide variety of applications (not always and not necessarily flagged as “high-tech”) where downsizing truly brings about new or improved features that can be immediately exploited for some practical use. These applications have encompassed fields as disparate as medicine, biology, energy conversion and storage, catalysis, sensing, nanocomposite engineering, cosmetics, to cite the most popular ones. For a new technology to be pervasive and disruptive, the costs associated to the fabrication, the characterization and the assemblage of its key components have to drop quickly over time, while at the same time the material quality and the reproducibility of the various processes must keep improving. In the case of nanomaterials, we have not yet witnessed such an ubiquitous revolution, and one of the reasons is probably the lack of straightforward and reproducible synthetic protocols providing large amounts of nanomaterials and thus capable of efficient up-scaling to fulfil industrial needs. Another reason likely resides in the growing concern that nanomaterials will pose new threats to the environment, but this aspect will not be investigated here. In this review, we will touch upon the critical feature of nanomaterials science and engineering dealing with the high throughput synthesis, with a focus on materials prepared in the liquid phase, where the expertise of the authors of this review lays. As a note of caution to the reader, we will not cover in depth all existing approaches to large scale syntheses. Our discussion will be instead a broad summary of the main types of synthetic approaches developed to date, and which we believe will be useful to scientists and engineers who are approaching the fabrication of nanomaterials with an eye on their use in large-scale, industrial applications. The review has been written according to the principle “from the simple to the complex”: it begins with the simplest one-batch heat-up synthesis approach, followed by hot-injection methods and ends by discussing the more sophisticated continuous flow syntheses of nanoparticles. Similarly, in each section, wherever possible, the discussion will start from simpler compounds, (for example, one-component noble metal nanocrystals), and will then move on to more complex structures (from binary to ternary and even quaternary compounds, which will be mainly metal oxides and chalcogenides).

Frontiers in Chemistry, 7, ISSN:2296-2646

We demonstrate high-mobility solution-processed inorganic field-effect transistors (FETs) with ultra-short channel (USC) length using semiconductor CdSe nanocrystals (NCs). Capping of the NCs with hybrid inorganic-organic CdCl

In this work, we present a new synthetic approach to colloidal PbS nanoplatelets (NPLs) utilizing a cation exchange (CE) strategy starting from CuS NPLs synthesized via the hot-injection method. Whereas the thickness of the resulting CuS NPLs was fixed at approx. 5 nm, the lateral size could be tuned by varying the reaction conditions, such as time from 6 to 16 h, the reaction temperature (120 °C, 140 °C), and the amount of copper precursor. In a second step, Cu+ cations were replaced with Pb2+ ions within the crystal lattice via CE. While the shape and the size of parental CuS platelets were preserved, the crystal structure was rearranged from hexagonal covellite to PbS galena, accompanied by the fragmentation of the monocrystalline phase into polycrystalline one. Afterwards a halide mediated ligand exchange (LE) was carried out in order to remove insulating oleic acid residues from the PbS NPL surface and to form stable dispersions in polar organic solvents enabling thin-film fabrication. Both CE and LE processes were monitored by several characterization techniques. Furthermore, we measured the electrical conductivity of the resulting PbS NPL-based films before and after LE and compared the processing in ambient to inert atmosphere. Finally, we fabricated field-effect transistors with an on/off ratio of up to 60 and linear charge carrier mobility for holes of 0.02 cm2 V−1 s−1.

We present a colloidal synthesis of quaternary Cu–Zn–In–S (CZIS) nanoplatelets (NPLs) by means of partial cation exchange. Starting with the synthesis of highly monodisperse binary CuS NPLs with lateral dimensions of ∼64 nm and thickness of ∼5 nm, we further performed a cation exchange reaction in which copper was partly replaced by indium, leading to Cu–In–S NPLs. To enhance the stability of the resulting NPLs and to improve their optical properties, we carried out the ZnS shell growth via both the heterogeneous nucleation of ZnS on the NPLs and via partial cation exchange on the surface of the particles. The latter reaction resulted, however, in rather an alloyed than the core/shell structure, whereas the reaction between zinc and sulfur precursors yielded unusual cookie-like hexagonal shaped structure, in which ZnS trigonal extensions grew only on one of the basal planes of the plates along the thickness direction. Upon ZnS growth, the lateral dimensions of the resulting core/shell CZIS/ZnS and alloyed CZIS NPLs distinctly increased to ∼80 and ∼75 nm, respectively. The analysis of the optical properties of the alloyed CZIS NPLs showed photoluminescence (PL) in the range from 780 to 820 nm depending on the reaction time and temperature. This PL signal originated mainly from small nanoparticles formed as a byproduct in the synthesis. In contrast to the alloyed NPLs, PL measurements of the core/shell CZIS/ZnS platelets showed a weak emission in the near-infrared region (PL maximum at approx. 1110 nm), which so far has rarely been reported for the copper chalcogenide-based two-dimensional structures.

Atomically flat colloidal semiconductor CdSe nanoplatelets (NPLs) with precisely controlled thickness possess a range of unique optoelectronic properties. Here, we study the growth of CdSe, CdTe, and CdS NPLs with the aim of synthesizing thicker NPLs in order to extend their optical activity further into the lower energy/larger wavelength range. We employ cadmium halides, which lead to faster reaction kinetics as confirmed by control experiments with cadmium hydroxide as a Cd-precursor. Addition of halides in all cases led to the formation of thicker NPL species, as compared with the corresponding syntheses without these additives. Analysis of a recent theoretical model of the platelet growth mechanism confirms an earlier suggestion that reducing both the reaction enthalpy and the surface energy of CdSe, by replacing acetate ligands with chloride ions, should indeed lead to thicker NPLs as observed. We noticed a formation of Cd0-metal nanoparticles in the first stage of the synthesis by preparing the Cd-precursor, which is another key finding of our work. We assume that these particles can serve as an active cadmium source facilitating the growth of the NPLs. The resulting 6 ML CdSe NPLs exhibited bright photoluminescence with quantum yield of up to 50%, exceptionally narrow spectrum centered at 582 nm with full width at half-maximum of approx. 11 nm, and small Stokes shift of 2 nm. Moreover, we demonstrated the synthesis of heterostructured core/shell CdSe/CdS NPLs based on 6 ML CdSe platelets, which also exhibited bright fluorescence. This work shows the possibility to overcome energetic barrier limiting the size (thickness) control by using appropriate promoters of the growth of CdSe, CdTe, and CdS 2D structures.

Quasi-two-dimensional (2D) CdSe nanoplatelets (NPLs) are distinguished by their unique optical properties in comparison to classical semiconductor nanocrystals, such as extremely narrow emission line widths, reduced Auger recombination, and relatively high absorption cross sections. Inherent to their anisotropic 2D structure, however, is the loss of continuous tunability of their photoluminescence (PL) properties due to stepwise growth. On top of that, limited experimental availability of NPLs of different thicknesses and ultimately the bulk band gap of CdSe constrain the achievable PL wavelengths. Here, we report on the doping of CdSe NPLs with mercury, which gives rise to additional PL in the red region of the visible spectrum and in the near-infrared region. We employ a seeded-growth method with injection solutions containing cadmium, selenium, and mercury. The resulting NPLs retain their anisotropic structure, are uniform in size and shape, and present significantly altered spectroscopic characteristics due to the existence of additional energetic states. We conclude that doping takes place by employing elemental analysis in combination with PL excitation spectroscopy, X-ray photoelectron spectroscopy, and single-particle fluorescence spectroscopy, confirming single emitters being responsible for multiple distinct emission signals.

Semiconductor colloidal nanoplatelets (NPLs) are a promising new class of nanostructures that can bring much impact on lightning technologies, light-emitting diodes (LED), and laser fabrication. Indeed, great progress has been made in optimizing the optical properties of the NPLs for the visible spectral range, which has already made the implementation of a number of effective devices on their basis possible. To date, state-of-the-art near-infrared (NIR)-emitting NPLs are significantly inferior to their visible-range counterparts, although it would be fair to say that they received significantly less research attention so far. In this study, we report a comprehensive analysis of steady-state and time-dependent photoluminescence (PL) properties of four monolayered (ML) PbSe NPLs. The PL measurements are performed in a temperature range of 78&ndash, 300 K, and their results are compared to those obtained for CdSe NPLs and PbSe quantum dots (QDs). We show that multiple emissive states, both band-edge and trap-related, are responsible for the formation of the NPLs&rsquo, PL band. We demonstrate that the widening of the PL band is caused by the inhomogeneous broadening rather than homogeneous one, and analyze the possible contributions to PL broadening.

We report an unsurpassed solution characterization technique based on analytical ultracentrifugation, which demonstrates exceptional potential for resolving particle sizes in solution with sub-nm resolution. We achieve this improvement in resolution by simultaneously measuring UV/Vis spectra while hydrodynamically separating individual components in the mixture. By equipping an analytical ultracentrifuge with a novel multi-wavelength detector, we are adding a new spectral discovery dimension to traditional hydrodynamic characterization, and amplify the information obtained by orders of magnitude. We demonstrate the power of this technique by characterizing unpurified CdTe nanoparticle samples, avoiding tedious and often impossible purification and fractionation of nanoparticles into apparently monodisperse fractions. With this approach, we have for the first time identified the pure spectral properties and band-gap positions of discrete species present in the CdTe mixture., Max-Planck Society; BASF SE, Ludwigshafen; National Institutes of Health (RR022200); NSF (ACI-1339649); National Science Foundation (TG-MCB070039N); DFG ("PE 427/28-1")

Wir berichten über eine Weiterentwicklung auf Grundlage der analytischen Ultrazentrifugation, durch welche Partikelgrößen direkt in Lösung mit Sub-nm-Auflösung charakterisiert werden können. Erreicht wird diese Auflösung durch die simultane Messung von UV/Vis-Spektren, während die einzelnen Komponenten der Mischung hydrodynamisch aufgetrennt werden. Durch die Aufrüstung der analytischen Ultrazentrifuge mit einem neuartigen Multiwellenlängendetektor wird der traditionellen hydrodynamischen Charakterisierung eine weitere spektrale Dimension hinzugefügt, was den Informationsgehalt vervielfacht. Die Leistungsfähigkeit der Messmethode wird durch die Charakterisierung von CdTe-Nanopartikeln verdeutlicht, wobei keine Aufreinigung und Fraktionierung der Nanopartikeln in einzelne, scheinbar monodisperse Fraktionen erforderlich ist. Durch unsere Untersuchungen konnten wir zum ersten Mal die reinen spektralen Eigenschaften und Bandlücken von diskreten CdTe-Nanopartikelspezies in einer Mischung messen. published

We report on an efficient assembly approach to a variety of electrostatically stabilized all-inorganic semiconductor nanocrystals (NCs) via their linking with appropriate ions into multibranched gel networks. These all-inorganic non-ordered 3D assemblies can combine strong interparticle coupling which facilitates charge transport between the NCs with their diverse morphology, composition, size, and functional capping ligands. Moreover, the resulting dry gels (aerogels) are highly porous monolithic structures, which preserve the quantum confinement of their building blocks. The inorganic semiconductor aerogel made of 4.5 nm CdSe colloidal NCs, capped with iodide ions and bridged with Cd2+ ions, exhibited a surface area as high as 146 m2/g.

A novel colloidal synthesis of copper selenide nanosheets (NSs) with lateral dimensions of up to 3 μm is developed. This material is used for the fabrication of flexible conductive films prepared via simple drop-casting of the NS dispersions without any additional treatment. The electrical performance of these coatings is benchmarked against copper selenide spherical nanocrystals (SNCs) in order to demonstrate the advantage of 2D morphology of the NSs for flexible electronics. In this contest, Cu2−xSe SNC films exhibit higher conductivity but lower reproducibility due to the formation of cracks leading to discontinuous films. Furthermore, the electrical properties of the films deposited on different flexible substrates following their bending, stretching and folding are studied. A comparison of Cu2−xSe SNC and CuSe NS films reveals an increased stability of the CuSe NS films under mechanical stress applied to the samples and their improved long-term stability in air.

The application of electrochemical methods for the characterization of colloidal quantum dots (QDs) attracts considerable attention as these methods may allow for monitoring of some crucial parameters, such as energetic levels of conduction and valence bands as well as surface traps and ligands under real conditions of colloidal solution. In the present work we extend the applications of cyclic voltammetry (CV) to in situ monitoring of degradation processes of water-soluble CdTe QDs. This degradation occurs under lowering of pH to the values around 5, i.e. under conditions relevant to bioimaging applications of these QDs, and is accompanied by pronounced changes of their photoluminescence. Observed correlations between characteristic features of CV diagrams and the fluorescence spectra allowed us to propose mechanisms responsible for evolution of the photoluminescence properties as well as degradation pathway of CdTe QDs at low pH.

The optical properties of semiconductor nanocrystals (SC NCs) are largely controlled by their size and surface chemistry, i.e., the chemical composition and thickness of inorganic passivation shells and the chemical nature and number of surface ligands as well as the strength of their bonds to surface atoms. The latter is particularly important for CdTe NCs, which - together with alloyed CdxHg1-xTe - are the only SC NCs that can be prepared in water in high quality without the need for an additional inorganic passivation shell. Aiming at a better understanding of the role of stabilizing ligands for the control of the application-relevant fluorescence features of SC NCs, we assessed the influence of two of the most commonly used monodentate thiol ligands, thioglycolic acid (TGA) and mercaptopropionic acid (MPA), on the colloidal stability, photoluminescence (PL) quantum yield (QY), and PL decay behavior of a set of CdTe NC colloids. As an indirect measure for the strength of the coordinative bond of the ligands to SC NC surface atoms, the influence of the pH (pD) and the concentration on the PL properties of these colloids was examined in water and D2O and compared to the results from previous dilution studies with a set of thiol-capped Cd1-xHgxTe SC NCs in D2O. As a prerequisite for these studies, the number of surface ligands was determined photometrically at different steps of purification after SC NC synthesis with Ellman's test. Our results demonstrate ligand control of the pH-dependent PL of these SC NCs, with MPA-stabilized CdTe NCs being less prone to luminescence quenching than TGA-capped ones. For both types of CdTe colloids, ligand desorption is more pronounced in H2O compared to D2O, underlining also the role of hydrogen bonding and solvent molecules.