443 results on '"Viguier B"'
Search Results
2. Creep of single-crystals of nickel-base γ-alloy at temperatures between 1150 °C and 1288 °C
3. Solid-State Phase Transformations Involving (Nb,Mo)2CrB2 Borides and (Nb,Ti)2CS Carbosulfides at the Grain Boundaries of Superalloy Inconel 718
4. Influence of the microstructure on the corrosion behaviour of 2024 aluminium alloy coated with a trivalent chromium conversion layer
5. A Vacancy Model of Pore Annihilation During Hot Isostatic Pressing of Single Crystals of Nickel-Base Superalloys
6. Evolution of interfacial dislocation network during anisothermal high-temperature creep of a nickel-based superalloy
7. Structural characterization of the scale formed on a Ti–46Al–8Nb alloy oxidised in air at 700 °C
8. Creep behaviour of as received, aged and cold worked INCONEL 617 at 850 °C and 950 °C
9. A Coq proof of the correctness of X25519 in TweetNaCl
10. An Experimental Study of the Hydrogen Embrittlement of Alloy 718 in PWR Primary Water
11. A Study of Corrosion Mechanisms and Kinetics of Alloy 718 in PWR Primary Water
12. Experimental data about mechanical behaviour during compression tests for various matted fibres
13. Relation between composition, microstructure and oxidation in iron aluminides
14. Internal friction in advanced Fe–Al intermetallics
15. Influence of oxide films on primary water stress corrosion cracking initiation of alloy 600
16. Chapter 62 Work hardening in some ordered intermetallic compounds
17. Behaviour of the oxide scale during SEM in situ plastic deformation of pure nickel foil
18. Plasticity of Ni 3(Al, Hf) above the stress peak temperature
19. High-temperature oxidation kinetics of NiAl single crystal and oxide spallation as a function of crystallographic orientation
20. Water table variations in the hyperarid Atacama Desert : role of the increasing groundwater extraction in the pampa del tamarugal (Northern Chile)
21. In-situ EBSD characterization of deformation behavior of primary alpha phase in Ti-6Al-4V.
22. Recognition and Quantification of Dual Phase Titanium Alloy Microstructures Using Convolutional Neural Networks.
23. Transformations, Recrystallization, Microtexture and Plasticity in Titanium Alloys.
24. Effect of cross-sectional area reduction rate and alloy composition on the formation of <001>-fiber texture in Ti-Mo-Al-Zr alloy wire.
25. Microstructure-Property Relationships in Cold Rollable, High-Strength α/β Alloys.
26. Phase transformation and evolution of dislocation structure in the β phase of Ti-17 alloy during hot deformation.
27. Macro-mesoscale microstructural evolution modeling under hot forging of a Ti-17 alloy with a lamellar (α+β) starting microstructure.
28. Development of Porous Titanium Sheet with High Porosity and Good Mechanical Properties.
29. Effect of strain rate on α-lath thickness of TC17 alloy after deformation and subsequent heat treatment.
30. The effect of Titanium Alloy Composition and Tool Coating on Drilling Machinability.
31. Thermomechanical process route to achieve high fracture toughness in Ti-17 forgings for high temperature applications.
32. Effect of mechanical surface treatments on the high temperature oxidation of pure titanium: the role of nitrogen.
33. Gaseous thermochemical synthesis and characterization of mixed interstitial phases in the Ti-C-O system.
34. Analysis of the Development of Abnormal Grains Structures During Beta Annealing of Ti-64 Wrought Products.
35. Origins and importance of fine secondary α in slowly cooled Ti6Al4V.
36. Phase separation and up-hill diffusion in the ordered α2 compound of a γ- Ti-Al-Nb alloy.
37. Criteria for fast and selective α precipitation at β grain boundaries in Ti-alloys Consequence for in-service microstructures.
38. Evolution of α phase in metastable β titanium alloys studied by small-angle X-ray scattering.
39. Phase transformation sequence of Ti-6Al-4V as a function of the cooling rate.
40. Direct Evidence for Dynamic Phase Transformation during High Temperature Deformation in Ti-64.
41. Texture evolution during Isothermal compression process of Ti-22Al-25Nb alloy in B2 phase region.
42. Ultrasonic velocity variation of Ti6Al4V Ti-alloy bars under conventional forging combined with triple heat treatment.
43. The effect of plastic deformation on martensite decomposition process in Ti-6Al-4V alloy.
44. Effect of oxygen addition on the formation of isothermal ω phase in Ti-Fe alloys.
45. Further Research on Hardenability of Ti-1023 β Alloy Leading to a New DOE.
46. Ti-15Mo alloy prepared by cryogenic milling and spark plasma sintering.
47. Microstructure and texture in cryomilled and spark plasma sintered Ti Grade 2.
48. Flow modelling of Ti6Al4V under large strains.
49. Evolution of distance between ω particles in metastable β-Ti alloy determined from in-situ small angle neutron scattering.
50. Phase field modeling of deformation twinning in β-metastable titanium alloys.
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.