Search

The recent discovery of superconductivity in infinite-layer (IL, ABO$_2$) nickelates has opened a new avenue to deepen the understanding of high-temperature superconductivity. However, progress in this field is slowed by significant challenges in material synthesis and the scarcity of research groups capable of producing high quality superconducting samples. IL nickelates are obtained from a reduction of the perovskite ABO$_3$ phase, typically achieved by annealing using CaH$_2$ as a reducing agent. Here, we present a new method to synthesize superconducting infinite-layer nickelate Pr$_{0.8}$Sr$_{0.2}$NiO$_2$ thin films using an aluminum overlayer deposited by sputtering as a reducing agent. We systematically optimized the aluminum deposition parameters and obtained superconducting samples reduced either in situ or ex situ (after air exposure of the precursor ABO$_3$ films). A comparison of their crystalline quality and transport properties shows that in situ Al reduction enhances the quality of the superconducting Pr$_{0.8}$Sr$_{0.2}$NiO$_2$ thin films, achieving a maximum superconducting transition temperature $T_{c}^{onset}$ of 17 K, in agreement with the optimum value reported for this compound. This simple synthesis route, much more accessible than existing methods, offers better control and reproducibility over the topotactic transformation, opening new opportunities to gain insights into the physics of superconductivity in nickelates.

Two-dimensional electron gases(2DEGs)based on KTaO3 are emerging as a promising platform for spin-orbitronics due to their high Rashba spin-orbit coupling (SOC) and gate-voltage tunability. The recent discovery of a superconducting state in KTaO3 2DEGs now expands their potential towards topological superconductivity. Although the band structure of KTaO3 surfaces of various crystallographic orientations has already been mapped using angle-resolved photoemission spectroscopy(ARPES), this is not the case for superconducting KTaO3 2DEGs. Here, we reveal the electronic structure of superconducting 2DEGs based on KTaO3 (111) single crystals through ARPES measurements. We fit the data with a tight-binding model and compute the associated spin textures to bring insight into the SOC-driven physics of this fascinating system., Comment: 9 pages, 4 figures

The versatility of properties displayed by two-dimensional electron gases (2DEGs) at oxide interfaces has fostered intense research in hope of achieving exotic electromagnetic effects in confined systems. Of particular interest is the recently discovered superconducting state appearing in (111)-oriented KTaO$_3$ interfaces, with a critical temperature $T_c \approx 2$ K, almost ten times higher than that of SrTiO$_3$-based 2DEGs. Just as in SrTiO$_3$-based 2DEGs, fabricating devices in this new system is a technical challenge due to the fragility of the 2DEG and the propensity of bulk KTaO$_3$ to become conducting outside the devices upon adventitious oxygen vacancy doping. Here, we present three different techniques for patterning Hall bars in AlO$_x$/KTaO$_3$~(111) heterostructures. The devices show superconducting transitions ranging from 1.3 K to 1.78 K, with limited degradation from the unpatterned thin film, and enable an efficient tuning of the carrier density by electric field effect. The array of techniques allows for the definition of channels with a large range of dimensions for the design of various kinds of devices to explore the properties of this system down to the nanoscale.

Rashba interfaces have emerged as promising platforms for spin-charge interconversion through the direct and inverse Edelstein effects. Notably, oxide-based two-dimensional electron gases (2DEGs) display a large and gate-tunable conversion efficiency, as determined by transport measurements. However, a direct visualization of the Rashba-split bands in oxide 2DEGs is lacking, which hampers an advanced understanding of their rich spin-orbit physics. Here, we investigate KTaO$_3$-2DEGs and evidence their Rashba-split bands using angle resolved photoemission spectroscopy. Fitting the bands with a tight-binding Hamiltonian, we extract the effective Rashba coefficient and bring insight into the complex multiorbital nature of the band structure. Our calculations reveal unconventional spin and orbital textures, showing compensation effects from quasi-degenerate band pairs which strongly depend on in-plane anisotropy. We compute the band-resolved spin and orbital Edelstein effects, and predict interconversion efficiencies exceeding those of other oxide 2DEGs. Finally, we suggest design rules for Rashba systems to optimize spin-charge interconversion performance.

The highly mobile electrons at the interface of SrTiO3 with other oxide insulators, such as LaAlO3 or AlOx, are of great current interest. A vertical gate voltage allows controlling a metal/superconductor-to-insulator transition, as well as electrical modulation of the spin-orbit Rashba coupling for spin-charge conversion. These findings raise important questions about the origin of the confined electrons as well as the mechanisms that govern the interfacial electric field. Here we use infrared ellipsometry and confocal Raman spectroscopy to show that an anomalous polar moment is induced at the interface that is non-collinear, highly asymmetric and hysteretic with respect to the vertical gate electric field. Our data indicate that an important role is played by the electromigration of oxygen vacancies and their clustering at the antiferrodistortive domain boundaries of SrTiO3, which generates local electric and possibly also flexoelectric fields and subsequent polar moments with a large lateral component. Our results open new perspectives for the defect engineering of lateral devices with strongly enhanced and hysteretic local electric fields that can be manipulated with various other parameters, like strain, temperature, or photons.

Oxide interfaces exhibit a broad range of physical effects stemming from broken inversion symmetry. In particular, they can display non-reciprocal phenomena when time reversal symmetry is also broken, e.g., by the application of a magnetic field. Examples include the direct and inverse Edelstein effects (DEE, IEE) that allow the interconversion between spin currents and charge currents. The DEE and IEE have been investigated in interfaces based on the perovskite SrTiO$_3$ (STO), albeit in separate studies focusing on one or the other. The demonstration of these effects remains mostly elusive in other oxide interface systems despite their blossoming in the last decade. Here, we report the observation of both the DEE and IEE in a new interfacial two-dimensional electron gas (2DEG) based on the perovskite oxide KTaO$_3$. We generate 2DEGs by the simple deposition of Al metal onto KTaO$_3$ single crystals, characterize them by angle-resolved photoemission spectroscopy and magnetotransport, and demonstrate the DEE through unidirectional magnetoresistance and the IEE by spin-pumping experiments. We compare the spin-charge interconversion efficiency with that of STO-based interfaces, relate it to the 2DEG electronic structure, and give perspectives for the implementation of KTaO$_3$ 2DEGs into spin-orbitronic devices.

SrTiO$_3$-based two-dimensional electron gases (2DEGs) can be formed through the deposition of epitaxial oxides like LaAlO$_3$ or of reactive metals such as Al. Such 2DEGs possess a finite Rashba spin-orbit coupling that has recently been harnessed to interconvert charge and spin currents through the direct and inverse Edelstein and spin Hall effects. Here we compare the formation and properties of 2DEGs generated in SrTiO$_3$ by the growth of Al, Ta and Y ultrathin films by magnetron sputtering. By combining in situ and ex situ X-ray photoelectron spectroscopy (XPS) we gain insight into the reduction of the SrTiO$_3$ and the appearance of Ti$^{3+}$ states associated with 2DEG formation, its reoxidation by exposure to the air, and the transformation of the metal into its binary oxides. We extract the carrier densities through magnetotransport and compare them with the XPS data. Finally, working with samples covered by an extra layer of NiFe, we perform spin-pumping ferromagnetic resonance experiments and investigate spin-charge conversion as a function of gate voltage. We identify trends in the data across the different sample systems and discuss them as a function of the carrier density and the transparency of the metal oxide tunnel barrier.

Two-dimensional electron gases (2DEGs) can form at the surface of oxides and semiconductors or in carefully designed quantum wells and interfaces. Depending on the shape of the confining potential, 2DEGs may experience a finite electric field, which gives rise to relativistic effects such as the Rashba spin-orbit coupling. Although the amplitude of this electric field can be modulated by an external gate voltage, which in turn tunes the 2DEG carrier density, sheet resistance and other related properties, this modulation is volatile. Here, we report the design of a ''ferroelectric'' 2DEG whose transport properties can be electrostatically switched in a non-volatile way. We generate a 2DEG by depositing a thin Al layer onto a SrTiO$_3$ single crystal in which 1 percent of Sr is substituted by Ca to make it ferroelectric. Signatures of the ferroelectric phase transition at 25 K are visible in the Raman response and in the temperature dependences of the carrier density and sheet resistance that shows a hysteretic dependence on electric field as a consequence of ferroelectricity. We suggest that this behavior may be extended to other oxide 2DEGs, leading to novel types of ferromagnet-free spintronic architectures.