Search

Abstract In this work, a new polymeric binder (polymer of intrinsic microporosity, PIM‐1) has been investigated and discussed to prepare and characterize composite materials for the cathodic oxygen reduction reaction. The new binder is a polymer of intrinsic microporosity, a family of organic compounds with molecularly rigid (glassy) structure, good mechanical and chemical stability. Their influence on the electrocatalytic behaviour of a commercial electrocatalyst during the oxygen reduction reaction in acidic and alkaline media has been investigated, discussed and compared to the behaviour of common cationic and anionic polymer binders, using rotating disk electrode (RDE) techniques. Polymers of intrinsic microporosity perform similarly well, and sometimes better (due to rigidity and gas permeation) when compared to commercial binders. Thus, herein, we showed that PIMs do represent a very promising and versatile alternative as binders in electrocatalysis.

The synthesis of iodinated compounds using cheap, simple, and green strategies is of fundamental importance. Iodination reactions are mainly used to synthesize useful intermediates, especially in the pharmaceutical field, where they are employed for the production of contrast media or of iodinated active pharmaceutical ingredients. Traditional synthetic methods suffer from the use of erosive, toxic, or hazardous reactants. Approaches which involve the use of molecular iodine as an iodinating agent require the addition of an oxidizing agent, which is often difficult to handle. Electrochemistry can offer a valid and green alternative by avoiding the addition of such oxidizing agents, transforming the iodine source in the active species through the use of electrons as the main reactants. Herein, we report the electrochemical iodination with the generation of iodinating species in situ in water by using iodides as the source of iodine atoms. First of all, the electrochemical behavior of iodide and iodine in water on carbonaceous anodes was studied and, after selecting the suitable potential, in situ electrochemical iodination was successfully applied to 5-hydroxyisophthalic acid and 5-sulfosalicylic acid, comparing the iodinating power of I2 and iodonium species.

The hydrogen economy relies on effective and environmentally friendly processes for energy conversion and storage. To this end, hydrogen is progressively holding the role of preferred energy vector. Within this frame, electrochemical science and technology is actively contributing in developing advanced fuel cells and water electrolyzers to be integrated in (i) energy parks to decouple production and consumption; (ii) exploit renewable sources; (iii) favour the progressive reduction of fossil fuels and reduce the greenhouse effect via decarbonization. The exploitation of the relevant processes and devices call for the sound control over the environmental impact from production to end-of-life steps. Here, life-cycle analyses were performed and discussed focusing on both acid and alkaline fuel cells, i.e., proton exchange membrane fuel cells (PEMFC) and anion-exchange membrane fuel cells (AEMFC), and assessing their contribution to key environmental impact categories such as, for example, global warming and ozone layer depletion. Within these premises, the study points to the benefits of replacing platinum by low load Pd/CeO2 bifunctional electrocatalyst on electrochemical hydrogen production and usage.

This work aims at reviewing the most impactful results obtained on the development of Cu-based photocathodes. The need of a sustainable exploitation of renewable energy sources and the parallel request of reducing pollutant emissions in airborne streams and in waters call for new technologies based on the use of efficient, abundant, low-toxicity and low-cost materials. Photoelectrochemical devices that adopts abundant element-based photoelectrodes might respond to these requests being an enabling technology for the direct use of sunlight to the production of energy fuels form water electrolysis (H2) and CO2 reduction (to alcohols, light hydrocarbons), as well as for the degradation of pollutants. This review analyses the physical chemical properties of Cu2O (and CuO) and the possible strategies to tune them (doping, lattice strain). Combining Cu with other elements in multinary oxides or in composite photoelectrodes is also discussed in detail. Finally, a short overview on the possible applications of these materials is presented.

In this work, a new polymeric binder (polymer of intrinsic microporosity, PIM‐1) has been investigated and discussed to prepare and characterize composite materials for the cathodic oxygen reduction reaction. The new binder is a polymer of intrinsic microporosity, a family of organic compounds with molecularly rigid (glassy) structure, good mechanical and chemical stability. Their influence on the electrocatalytic behaviour of a commercial electrocatalyst during the oxygen reduction reaction in acidic and alkaline media has been investigated, discussed and compared to the behaviour of common cationic and anionic polymer binders, using rotating disk electrode (RDE) techniques. Polymers of intrinsic microporosity perform similarly well, and sometimes better (due to rigidity and gas permeation) when compared to commercial binders. Thus, herein, we showed that PIMs do represent a very promising and versatile alternative as binders in electrocatalysis. [ABSTRACT FROM AUTHOR]

One of the major drawbacks in Lithium-air batteries is the sluggish kinetics of the oxygen reduction reaction (ORR). In this context, better performances can be achieved by adopting a suitable electrocatalyst, such as MnO2. Herein, we tried to design nano-MnO2 tuning the final ORR electroactivity by tailoring the doping agent (Co or Fe) and its content (2% or 5% molar ratios). Staircase-linear sweep voltammetries (S-LSV) were performed to investigate the nanopowders electrocatalytic behavior in organic solvent (propylene carbonate, PC and 0.15 M LiNO3 as electrolyte). Two percent Co-doped MnO2 revealed to be the best-performing sample in terms of ORR onset shift (of ~130 mV with respect to bare glassy carbon electrode), due to its great lattice defectivity and presence of the highly electroactive γ polymorph (by X-ray diffraction analyses, XRPD and infrared spectroscopy, FTIR). 5% Co together with 2% Fe could also be promising, since they exhibited fewer diffusive limitations, mainly due to their peculiar pore distribution (by Brunauer–Emmett-Teller, BET) that disfavored the cathode clogging. Particularly, a too-high Fe content led to iron segregation (by energy dispersive X-ray spectroscopy, EDX, X-ray photoelectron spectroscopy, XPS and FTIR) provoking a decrease of the electroactive sites, with negative consequences for the ORR.

Sn-modification of TiO2 photocatalysts has been recently proposed as a suitable strategy to improve pollutant degradation as well as hydrogen production. In particular, visible light activity could be promoted by doping with Sn2+ species, which are, however, thermally unstable. Co-promotion with N and Sn has been shown to lead to synergistic effects in terms of visible light activity, but the underlying mechanism has, so far, been poorly understood due to the system complexity. Here, the structural, optical, and electronic properties of N,Sn-copromoted, nanostructured TiO2 from sol-gel synthesis were investigated: the Sn/Ti molar content was varied in the 0–20% range and different post-treatments (calcination and low temperature hydrothermal treatment) were adopted in order to promote the sample crystallinity. Depending on the adopted post-treatment, the optical properties present notable differences, which supports a combined role of Sn dopants and N-induced defects in visible light absorption. X-ray absorption spectroscopy at the Ti K-edge and Sn L2,3-edges shed light onto the electronic properties and structure of both Ti and Sn species, evidencing a marked difference at the Sn L2,3-edges between the samples with 20% and 5% Sn/Ti ratio, showing, in the latter case, the presence of tin in a partially reduced state.