Search

Watermelon suffers substantial post-harvest losses owing to strict quality standards, resulting in 20–30% of the crop being left unharvested. This study investigated the potential of valorizing dried watermelon pomace (DWP), a byproduct of watermelon juice extraction, focusing on its lycopene content—a potent antioxidant. This study assessed lycopene stability in DWP from four watermelon cultivars (Perla Nera®, Gavina®, Crimson Sweet, and Asahi Miyako) under different storage conditions (vial-sealed and vacuum-sealed). The lycopene content in freshly prepared DWP samples ranged from 0.734 to 1.572 mg/g db. The results indicated that vacuum-sealed samples exhibited significantly slower lycopene degradation than vial-sealed samples, highlighting the impact of air exposure on lycopene stability. After 90 days of storage, lycopene content in vacuum-sealed samples ranged from 0.214 to 1.234 mg/g db, while that in vial-sealed samples ranged from 0.013 to 0.731 mg/g db. Furthermore, this study assessed the effect of pretreatments with ascorbic acid (pretreatment A) and a mixture of ascorbic and citric acids (pretreatment B) on lycopene stability. Pretreatment B showed superior effectiveness, yielding higher lycopene levels than pretreatment A (p < 0.05). The stabilizing effects of ascorbic acid and citric acid were attributed to their antioxidant properties and their roles as pH regulators and chelators.

This article explores the use of olive pit powder (OPP) as a promising resource for enhancing the thermal insulation properties of epoxy mortars. A comprehensive analysis of the chemical and physical characteristics of OPP was conducted, employing analytical techniques including scanning electron microscopy (SEM), thermogravimetric analysis and emitted gas analysis (TG-MS-EGA), and proximal analysis. Experimental samples of epoxy grout were prepared by using different proportions of a conventional inorganic filler, quartz powder, and OPP within an epoxy mortar matrix. As the percentage of OPP in the formulation increased, the microstructure of the samples gradually became more porous and less compact. Consequently, there was a decrease in density with the increase in OPP content. The 28-day compressive strength decreased from 46 MPa to 12.8 MPa, respectively, in the samples containing only quartz (Sample E) and only OPP (Sample A) as a filler. Similarly, flexural strength decreased from 35.2 to 5.3 MPa. The thermal conductivity decreased from 0.3 W/mK in Sample E to 0.11 in Sample A. Therefore, increasing the %wt of OPP improved insulating properties while reducing the mechanical resistance values. This study highlights the potential of OPP as an environmentally friendly and thermally efficient filler for epoxy mortars, thereby promoting sustainable construction practices.

In Italy, watermelon cultivation spans 9510 hectares, with production levels largely influenced by seasonal market demand. As a result, surplus watermelon left unsold by September often remain in the fields, where they decompose naturally and go to waste. A chemical analysis of the watermelon liquid fraction waste (WW) indicates a high carbohydrate concentration, highlighting the potential for biotechnological valorization of this waste stream, converting it into lipids or exopolysaccharides (EPSs). This study investigates the feasibility of utilizing WW as an alternative growth substrate for microalgae, aligning with circular economy principles and advancing sustainable agricultural practices. By repurposing agricultural byproducts, this research supports biorefinery objectives, aiming to convert biomass into high-value secondary products, including biofuels, pigments, and nutraceuticals. Scenedesmus and Chlorella strains demonstrated promising growth and adaptability in WW, achieving biomass yields of 0.95 ± 0.07 g L−1 and 0.37 ± 0.02 g L−1, respectively, with a significant EPS production observed as medium gelation. Although lipid accumulation was limited in this case by the WW substrate, the lipid profiles of both strains were distinctively altered, notably lacking linolenic acid.

The increasing demand for sustainable agricultural practices aimed at reducing carbon dioxide emissions has driven the exploration of converting viticulture residues into biochar. This study investigates the potential technological applications of biochar as a filler for the production of electrically conductive composite materials, suitable to Bipolar Plate (BP) manufacturing. Grape seeds (GSs), defatted grape seeds (DGSs), wood stems (WSs), and whole grape seeds (WGSs) were converted into biochar samples through low-temperature (300 °C) pyrolysis for 3 or 24 h. The composition and thermal stability of biochar were evaluated through thermogravimetric analysis (TG), which provided valuable insights into interpreting the in-plane conductivity (IPC) values of the BP samples. Pyrolyzed GS and DGS biochar samples demonstrated enhanced thermal stability and conferred higher IPC values compared to WS counterparts. This indicates a clear correlation between the formation of carbon-rich structures during pyrolysis and overall electrical conductivity. In contrast, pyrolyzed WGSs produced BP samples with lower IPC values due to the presence of lipids, which were not effectively degraded by the low-temperature pyrolysis.

Apricot (AS), peach (PS), and plum shells (PlS) were examined as sustainable aggregates for non-structural lightweight concrete. The extraction of natural resources has a significant environmental impact and is not in line with the Sustainable Development Goals (SDGs) of Agenda 2030. Recycling agri-food waste, such as fruit shells, fully respects circular economy principles and SDGs. The chemical and physical properties of the shells were investigated using scanning electron microscopy (SEM) for microstructure analysis and TG-MS-EGA for thermal stress behavior. Two binding mixtures were used to prepare the concrete samples, one containing lime only (mixture “a”) and one containing both lime and cement (mixture “b”). Lime is a more sustainable building material but it compromises mechanical strength and durability. The performance of lightweight concrete was determined based on the type of aggregate used. PS had a high-water absorption capacity due to numerous micropores, resulting in lower density (1000–1200 kg/m3), compressive strength (1–4 MPa), and thermal conductivity (0.15–0.20 W/mK) of PS concrete. AS concrete showed the opposite trend (1120–1260 kg/m3; 2.8–7.0 MPa; 0.2–0.4 W/mK) due to AS microporosity-free and denser structure. PlS has intermediate characteristics in terms of porosity, density, and water absorption, resulting in concrete with intermediate characteristics (1050–1240 kg/m3; 1.9–5.2 MPa; 0.15–0.3 W/mK).

Spirulina platensis (SP) has gained popularity over the last few years, owing to its remarkable nutritional properties and high potential across various industrial sectors. In this study, we analyzed the volatile profile of eight SP samples from the same strain subjected to different drying (oven-drying, air-drying, and spray-drying) and storing conditions (“freshly prepared” and after 12 months of storage) using HS-SPME-GC-MS. Principal component analysis (PCA) was used as a multivariate technique to discern similarities and differences among the samples. The main aim was to assess the impact of the drying technique on the aroma profile and storage life of SP samples. Air-drying leads to the less pronounced formation of by-products related to heat treatment, such as Maillard and Strecker degradation compounds, but promotes oxidative and fermentative phenomena, with the formation of organic acids and esters, especially during storage. Thermal treatment, essential for limiting degradation and fermentation during storage and extending shelf life, alters the aroma profile through the formation of volatile compounds, such as Strecker aldehydes and linear aldehydes, from amino acid and lipid degradation. High temperatures in spray-drying favor the formation of pyrazines. The findings underscore the trade-offs inherent in choosing an appropriate drying method, thereby informing decision-making processes in industrial settings aimed at optimizing both product quality and efficiency.

The study examines the unique production process of Aceto Balsamico Tradizionale di Modena PDO (ABTM), emphasizing its complex phases and the impact of raw materials and artisanal skill on its flavor characteristics. Analytical tests focused on the volatile composition of vinegars from different wood barrels at different aging stages, using solid-phase micro-extraction (SPME) coupled with gas chromatography, either with mass spectrometry (GC/MS) or flame ionization detector (FID). Multivariate analysis, including principal component analysis (PCA), was employed to investigate the presence of peculiarities among the volatile profiles of samples of different barrel origin. The research focuses on characterizing the volatile composition of vinegars sourced from individual wood barrels, such as Cherry, Chestnut, Mulberry, Juniper, and Oak. Although it was not possible to identify molecules directly connected to the woody essence, some similarities emerged between vinegar samples from mulberry and cherry barrels and between those of juniper and oak. The former group is characterized by analytes with high molecular weights, such as furfural and esters, while the latter group shows more intense peaks for ethyl benzoate. Moreover, ethyl benzoate appears to predominantly influence samples from chestnut barrels. Due to the highly complex production process of ABTM, where each battery is influenced by several factors, this study’s findings are specific to the current experimental conditions.

To deal with climate emergency and reduce environmental impact, agro-industrial wastes are gradually gaining interest and are being used for new products and applications. The large production of watermelons represents an opportunity because of the many byproducts that can be transformed into innovative and valuable foodstuffs. In this study, we examined the lycopene-rich whole dietary fiber (WDF) obtained from the watermelon pomace of a peculiar cultivar, Gavina® (Oristano, Italy) a seedless fruit from Sardinia (Italy). The volatile chemical composition of the WDF was investigated using Solid-Phase Microextraction-Gas Chromatography/Mass Spectrometry (SPME-GC/MS). The aim was to follow the evolution of the Volatile Organic Compounds (VOCs) fraction during storage and verify its stability over time. Since watermelon is an excellent source of carotenoids, their byproducts were the most abundant VOCs of the freshly prepared samples, but their overall abundance decreased significantly during storage. The opposite trend was observed for acids and aldehydes, whose increase over time is related to amino acid degradation. Freshly prepared WDF can be used in the food industry as an antioxidant-rich dietary fiber that imparts a characteristic and pleasant aroma. Over time, its aroma profile and carotenoid content change considerably, reducing its health properties and limiting its potential application as a natural flavor.

The sustainable industrial production of indigo necessitates a unique extraction process to separate the plant-derived compounds. Calcium compounds are added to encourage hydrolysis of these precursors and to facilitate the isolation of the final form, resulting in an organic–inorganic composite pigment with unspecified characteristics. In this study, we devised a continuous solvent extraction procedure to fractionate the organic indigoid phase within the composite pigment. Overcoming challenges posed by limited solubility in the common organic solvents, this method allows for the analysis of individual fractions, significantly enhancing resolution. Comprehensive characterisation using spectroscopic analysis, thermogravimetry, and UHPLC-MS/MS revealed the potential for quantifying primary components of the natural pigment and distinct differentiation from the synthetic dye. This approach also holds promise for establishing robust manufacturing practices in the industrial production of natural indigo.

In this study, we compared the polyphenolic composition of the roasted grapevine wood chips of four Vitis vinifera cultivars—namely, Sorbara, Grasparossa, Malbo Gentile, and Spergola. These waste byproducts have the potential as infusion chips for the aging of alcoholic beverages and vinegars, contributing to an enriched sensory profile. Roasting amplifies aromatic nuances and triggers the depletion of crucial bioactive compounds, including polyphenols. We investigated the extent of polyphenolic loss in the ethanolic extract of roasted grapevine chips to repurpose this waste byproduct and assess its potential. We assessed the levels of trans-resveratrol, trans-ε-viniferin, trans-piceatannol, and the main resveratrol trimer. Our findings indicated a significant decrease in polyphenol content as the roasting temperature increased, from 16.85–21.12 mg GAE/g for grapevine chips roasted at 120 °C to 3.10–7.77 mg GAE/g for those roasted at 240 °C. This study also highlights notable genotypic differences in polyphenolic content. Among the red grape cultivars analyzed, Sorbara exhibited the highest levels (7.77–21.12 mg/GAEg), whereas the white grape cultivar Spergola showed the lowest polyphenolic content (3.10–16.85 mg/GAEg). These findings not only contribute to the scientific understanding of polyphenol stability but also hold practical implications for the enhancement of aged beverages, as well as advancing sustainable practices in the viticulture industries.

This study aimed to compare the aroma profiles of Sorbara and Spergola grapevine prunings roasted at different temperatures (120, 140, 160, 180, 200, and 240 °C). One potential application of grapevine prunings is their use as infusion chips to enhance and improve the aging processes of alcoholic beverages and vinegars. Aromatic compounds impart unique flavors and contribute to the complexity of the final products. Thermogravimetry–mass spectrometry coupled with evolved gas analysis (TGA-MS-EGA) was conducted to identify the thermal steps at which substantial changes occurred in the wood matrix. Solid-phase microextraction–gas chromatography–mass spectrometry (SPME-GC-MS) was used for the analysis of volatile compounds. Several key volatile compounds were identified, showing variations in their concentrations as a function of cultivar and roasting temperature. Furan derivatives, such as furfural, and phenolic compounds, such as guaiacol and vanillin, were the two main chemical classes of volatile compounds that predominantly defined the aroma of grapevine chips roasted above 180 °C. At lower roasting temperatures, some aldehydes, such as hexanal and terpenes, defined the aroma profiles of the samples. By repurposing waste materials, this application offers a pathway for environmentally conscious viticulture and sustainable practices within the food industry.

This work describes two alternative laboratory methods 'candying fruit' methods of fresh mesocarp of Crimson sweet watermelon, a typical waste and unappetizing material. Our experimental candying process was conducted by slow osmosis, lasting 24 weeks at room temperature. It was activated with granular sucrose according to our two alternative laboratory methods, WET and DRY. Fresh watermelon rinds were transformed into candied fruit with excellent flavor and aromas. The aromatic profile of all the materials was characterized with HS-SPME-GC–MS technique. The results highlighted some significant differences in the Volatile Organic Compounds fraction, probably attributable both to the cultivar and to the two candying methods, as verified also by a panel test. The class of alcohols remains almost constant in all the samples. Terpenoids are highly present in FRESH samples, while they disappear in DRY candied ones. Acetate esters are absent in FRESH rinds, they reach the maximum level in WET, and stop at the middle in DRY samples. The trend of the values ​​relating to the class of acids is opposite: absent in the FRESH aromatic profile, maximum and average for DRY and WET samples, respectively.

Microalgae, renowned for their high photosynthetic efficiency and minimal competition with land-based crops, hold great promise in the biofixation of CO2 from waste sources, making them valuable for diverse applications, including biofuels, food production, and biomaterials. An innovative technology, the integrated carbonate-based carbon capture and algae biofixation system is emerging as an alternative to traditional carbon capture and sequestration (CCS) methods. This closed-loop system utilizes bicarbonates as inorganic carbon sources, which can directly enter microalgae photosynthesis, subsequently regenerating carbonates for another cycle of carbon capture. This system offers significant advantages, including cost savings in carbon supply, simplified photobioreactor development, and reduced labor and energy requirements. Nevertheless, further research is essential to evaluate the suitability of various microorganisms and search for optimal growth conditions. In this study, we assessed the performance of two strains of Spirulina within the integrated system. Employing a Design of Experiments approach, we simultaneously varied temperature, bicarbonate concentration, and light irradiation while operating within a lab-scale photobioreactor. We achieved remarkable results, with a biomass productivity of 875 mg/L·d and an impressive CO2 utilization efficiency of 58%. These findings indicate a genuine opportunity for further exploration and scaling of this approach in industrial settings.

This study aimed to assess the metal content of tannic extracts obtained from grapevine canes, to evaluate their suitability as wood shavings for direct infusion during the aging process of alcoholic beverages or vinegars. Traditional barrel aging is a slow and costly process that can be enhanced through direct infusion of wood chips. Our investigation focused on the pruning materials of two widely cultivated Lambrusco cultivars in the Modena (Italy) area, Ancellotta and Salamino. The grapevine chips underwent preliminary heat treatments at temperatures ranging from 120 °C to 260 °C. Tannic extracts were obtained by ethanol maceration at 80 °C for 2 h. The metal composition was determined using inductively coupled plasma optical emission spectroscopy. Generally, the metal content increased with the roasting temperature of the chips. Two exceptions were noted in the Salamino extracts, where the concentrations of Bi and Ni decreased as the roasting temperature increased. The levels of heavy metal, such as Pb and Cd, were low, posing no toxicity concerns for using infused grapevine chips during the beverage aging process. The Ni concentration slightly exceeded the limits imposed by certain regulations. Its content is likely derived from the type of soil in which the plant has grown.

Pruning canes from grape vines are valuable byproducts that contain resveratrol and other health-boosting stilbenoids. This study aimed to assess the effect of roasting temperature on the stilbenoid content of vine canes by comparing two Vitis vinifera cultivars, Lambrusco Ancellotta and Salamino. Samples were collected during different phases of the vine plant cycle. One set was collected in September after the grape harvest and was air-dried and analyzed. A second set was obtained during vine pruning in February and evaluated immediately after collection. The main stilbenoid identified in each sample was resveratrol (~100–2500 mg/kg), with significant levels of viniferin (~100–600 mg/kg) and piceatannol (~0–400 mg/kg). Their contents decreased with increasing roasting temperature and residence time on the plant. This study provides valuable insights into the use of vine canes in a novel and efficient manner, which could potentially benefit different industries. One potential use involves the roasted cane chips to accelerate the aging of vinegars and alcoholic beverages. This method is more efficient and cost-effective than traditional aging, which is slow and unfavorable from an industrial perspective. Furthermore, incorporating vine canes into maturation processes reduces viticulture waste and enhances the final products with health-promoting molecules, such as resveratrol.

Among the waste materials of wine production, grape seeds constitute an important fraction of the pomace, from which the precious edible oil is extracted. The residual mass from oil extraction, the defatted grape seeds (DGS), can be destined for composting or valorized according to the circular economy rules to produce pyrolytic biochar by gasification or pellets for integral energy recovery. Only a small quantity is used for subsequent extraction of polyphenols and tannins. In this study, we performed a chemical characterization of the DGS, by applying spectroscopic techniques (ICP-OES) to determine the metal content, separation techniques (HS-SPME-GC-MS) to evaluate the volatile fraction, and thermal methods of analysis (TGA-MS-EGA) to identify different matrix constituents. Our main goal is to obtain information about the composition of DGS and identify some bioactive compounds constituting the matrix in view of possible future applications. The results suggest that DGS can be further exploited as a dietary supplement, or as an enriching ingredient in foods, for example, in baked goods. Defatted grape seed flour can be used for both human and animal consumption, as it is a source of functional macro- and micronutrients that help in maintaining optimal health and well-being conditions.

In this study, the trend of VOCs of dietary fiber samples, coming from three different watermelon cultivars Citrullus lanatus L. (variety Gavina®®, Crimson Sweet, and Asahi Miyako) was investigated. This foodstuff, obtained as a by-product of residual agri-food production, has gained increasing attention because of its many bioactive components and high dietary fiber content. The result is a fibrous material for specific applications in food manufacturing, such as corrector for some functional and technological properties. In this study, a method based on headspace solid-phase microextraction (HS-SPME) coupled with gas chromatography–mass spectrometry (GC–MS) was used to characterize the aromatic profiles of the dried raw materials. Therefore, the VOCs of the samples of the three cultivars were investigated. Experimental results have shown that watermelon fibers generate VOCs, which can be grouped into six common classes of analytes. The different distributions of the identified compounds made it possible to effectively differentiate the three cultivars studied based on their peculiar aroma profiles. In particular, Gavina®® fiber is distinguished by the high content of terpenes, Asahi Miyako by the presence of aldehydes generated as fatty acid metabolites, and Crimson Sweet by the higher content of acetyl esters.

In this study, the trend of Volatile Organic Compounds (VOCs) in dietary fiber samples from the winter melon (Cucumis Melo var. Inodorus, Yellow Canary type) were investigated. This foodstuff, obtained as a by-product of agri-food production, has gained increasing attention and is characterized by many bioactive components and a high dietary-fiber content. As regards fiber, it is poorly colored, but it may be whitened by applying a bleaching treatment with H2O2. The result is a fibrous material for specific applications in food manufacturing, for example, as a corrector for some functional and technological properties. This treatment is healthy and safe for consumers and widely applied in industrial food processes. In this study, a method based on headspace solid-phase microextraction (HS-SPME) coupled with gas chromatography–mass spectrometry (GC-MS) was applied for the characterization of the aromatic profile of the dried raw materials. Furthermore, VOC variation was investigated as function of the bleaching treatment with H2O2. The bleached samples were also analyzed after a long storage period (24 months), to assess their stability over time. As a result, the VOC fraction of the fresh raw fiber showed nine classes of analytes; these were restricted to seven for the bleached fiber at t0 time, and further reduced to four classes at the age of 24 months. Alcohols were the main group detected in the fresh raw sample (33.8 % of the total chromatogram area), with 2,3-butanediol isomers as the main compounds. These analytes decreased with time. An opposite trend was observed for the acids (9.7% at t0), which increased with time and became the most important class in the 24-month aged and bleached sample (57.3%).