Search

Soft robots present unique capabilities, but have been limited by the lack of scalable technologies for construction and the complexity of algorithms for efficient control and motion, which depend on soft-body dynamics, high-dimensional actuation patterns, and external/on-board forces. This paper presents scalable methods and platforms to study the impact of weight distribution and actuation patterns on fully untethered modular soft robots. An extendable Vibrating Intelligent Piezo-Electric Robot (eViper), together with an open-source Simulation Framework for Electroactive Robotic Sheet (SFERS) implemented in PyBullet, was developed as a platform to study the sophisticated weight-locomotion interaction. By integrating the power electronics, sensors, actuators, and batteries on-board, the eViper platform enables rapid design iteration and evaluation of different weight distribution and control strategies for the actuator arrays, supporting both physics-based modeling and data-driven modeling via on-board automatic data-acquisition capabilities. We show that SFERS can provide useful guidelines for optimizing the weight distribution and actuation patterns of the eViper to achieve the maximum speed or minimum cost-of-transportation (COT)., Comment: 8 pages, 21 figures, accepted by IROS 2023

Electrostatic actuators provide a promising approach to creating soft robotic sheets, due to their flexible form factor, modular integration, and fast response speed. However, their control requires kilo-Volt signals and understanding of complex dynamics resulting from force interactions by on-board and environmental effects. In this work, we demonstrate an untethered planar five-actuator piezoelectric robot powered by batteries and on-board high-voltage circuitry, and controlled through a wireless link. The scalable fabrication approach is based on bonding different functional layers on top of each other (steel foil substrate, actuators, flexible electronics). The robot exhibits a range of controllable motions, including bidirectional crawling (up to ~0.6 cm/s), turning, and in-place rotation (at ~1 degree/s). High-speed videos and control experiments show that the richness of the motion results from the interaction of an asymmetric mass distribution in the robot and the associated dependence of the dynamics on the driving frequency of the piezoelectrics. The robot's speed can reach 6 cm/s with specific payload distribution., Comment: Accepted to the 2023 IEEE International Conference on Robotics and Automation (ICRA)

Soft robots have drawn significant attention recently for their ability to achieve rich shapes when interacting with complex environments. However, their elasticity and flexibility compared to rigid robots also pose significant challenges for precise and robust shape control in real-time. Motivated by their potential to operate in highly-constrained environments, as in search-and-rescue operations, this work addresses these challenges of soft robots by developing a model-based full-shape controller, validated and demonstrated by experiments. A five-actuator planar soft robot was constructed with planar piezoelectric layers bonded to a steel foil substrate, enabling inchworm-like motion. The controller uses a soft-body continuous model for shape planning and control, given target shapes and/or environmental constraints, such as crawling under overhead barriers or "roof" safety lines. An approach to background model calibrations is developed to address deviations of actual robot shape due to material parameter variations and drift. Full experimental shape control and optimal movement under a roof safety line are demonstrated, where the robot maximizes its speed within the overhead constraint. The mean-squared error between the measured and target shapes improves from ~0.05 cm$^{2}$ without calibration to ~0.01 cm$^{2}$ with calibration. Simulation-based validation is also performed with various different roof shapes., Comment: Accepted to the 2022 IEEE 5th International Conference on Soft Robotics (RoboSoft). Project website: https://piezorobotcontroller.github.io/ Summary video: https://youtu.be/Md-Uo-pUaIs

Deep learning training involves a large number of operations, which are dominated by high dimensionality Matrix-Vector Multiplies (MVMs). This has motivated hardware accelerators to enhance compute efficiency, but where data movement and accessing are proving to be key bottlenecks. In-Memory Computing (IMC) is an approach with the potential to overcome this, whereby computations are performed in-place within dense 2-D memory. However, IMC fundamentally trades efficiency and throughput gains for dynamic-range limitations, raising distinct challenges for training, where compute precision requirements are seen to be substantially higher than for inferencing. This paper explores training on IMC hardware by leveraging two recent developments: (1) a training algorithm enabling aggressive quantization through a radix-4 number representation; (2) IMC leveraging compute based on precision capacitors, whereby analog noise effects can be made well below quantization effects. Energy modeling calibrated to a measured silicon prototype implemented in 16nm CMOS shows that energy savings of over 400x can be achieved with full quantizer adaptability, where all training MVMs can be mapped to IMC, and 3x can be achieved for two-level quantizer adaptability, where two of the three training MVMs can be mapped to IMC., Comment: 11 pages, 9 figures, 3 tables. Will appear in IEEE TCAS-I

Soft robots have drawn great interest due to their ability to take on a rich range of shapes and motions, compared to traditional rigid robots. However, the motions, and underlying statics and dynamics, pose significant challenges to forming well-generalized and robust models necessary for robot design and control. In this work, we demonstrate a five-actuator soft robot capable of complex motions and develop a scalable simulation framework that reliably predicts robot motions. The simulation framework is validated by comparing its predictions to experimental results, based on a robot constructed from piezoelectric layers bonded to a steel-foil substrate. The simulation framework exploits the physics engine PyBullet, and employs discrete rigid-link elements connected by motors to model the actuators. We perform static and AC analyses to validate a single-unit actuator cantilever setup and observe close agreement between simulation and experiments for both the cases. The analyses are extended to the five-actuator robot, where simulations accurately predict the static and AC robot motions, including shapes for applied DC voltage inputs, nearly-static "inchworm" motion, and jumping (in vertical as well as vertical and horizontal directions). These motions exhibit complex non-linear behavior, with forward robot motion reaching ~1 cm/s. Our open-source code can be found at: https://github.com/zhiwuz/sfers., Comment: Accepted to the International Conference on Robotics and Automation (ICRA) 2022. Video: https://youtu.be/nHcH3V7rCrk

Electrically-driven soft robots based on piezoelectric actuators may enable compact form factors and maneuverability in complex environments. In most prior work, piezoelectric actuators are used to control a single degree of freedom. In this work, the coordinated activation of five independent piezoelectric actuators, attached to a common metal foil, is used to implement inchworm-inspired crawling motion in a robot that is less than 0.5 mm thick. The motion is based on the control of its friction to the ground through the robot's shape, in which one end of the robot (depending on its shape) is anchored to the ground by static friction, while the rest of its body expands or contracts. A complete analytical model of the robot shape, which includes gravity, is developed to quantify the robot shape, friction, and displacement. After validation of the model by experiments, the robot's five actuators are collectively sequenced for inchworm-like forward and backward motion., Comment: Accepted to IEEE Transactions on Robotics

Autonomous vehicles are predicted to dominate the transportation industry in the foreseeable future. Safety is one of the major challenges to the early deployment of self-driving systems. To ensure safety, self-driving vehicles must sense and detect humans, other vehicles, and road infrastructure accurately, robustly, and timely. However, existing sensing techniques used by self-driving vehicles may not be absolutely reliable. In this paper, we design REITS, a system to improve the reliability of RF-based sensing modules for autonomous vehicles. We conduct theoretical analysis on possible failures of existing RF-based sensing systems. Based on the analysis, REITS adopts a multi-antenna design, which enables constructive blind beamforming to return an enhanced radar signal in the incident direction. REITS can also let the existing radar system sense identification information by switching between constructive beamforming state and destructive beamforming state. Preliminary results show that REITS improves the detection distance of a self-driving car radar by a factor of 3.63.

Nanoscale semiconductor technology has been a key enabler of the computing revolution. It has done so via advances in new materials and manufacturing processes that resulted in the size of the basic building block of computing systems - the logic switch and memory devices - being reduced into the nanoscale regime. Nanotechnology has provided increased computing functionality per unit volume, energy, and cost. In order for computing systems to continue to deliver substantial benefits for the foreseeable future to society at large, it is critical that the very notion of computing be examined in the light of nanoscale realities. In particular, one needs to ask what it means to compute when the very building block - the logic switch - no longer exhibits the level of determinism required by the von Neumann architecture. There needs to be a sustained and heavy investment in a nation-wide Vertically Integrated Semiconductor Ecosystem (VISE). VISE is a program in which research and development is conducted seamlessly across the entire compute stack - from applications, systems and algorithms, architectures, circuits and nanodevices, and materials. A nation-wide VISE provides clear strategic advantages in ensuring the US's global superiority in semiconductors. First, a VISE provides the highest quality seed-corn for nurturing transformative ideas that are critically needed today in order for nanotechnology-inspired computing to flourish. It does so by dramatically opening up new areas of semiconductor research that are inspired and driven by new application needs. Second, a VISE creates a very high barrier to entry from foreign competitors because it is extremely hard to establish, and even harder to duplicate., Comment: A Computing Community Consortium (CCC) workshop report, 18 pages

This paper presents a programmable in-memory-computing processor, demonstrated in a 65nm CMOS technology. For data-centric workloads, such as deep neural networks, data movement often dominates when implemented with today's computing architectures. This has motivated spatial architectures, where the arrangement of data-storage and compute hardware is distributed and explicitly aligned to the computation dataflow, most notably for matrix-vector multiplication. In-memory computing is a spatial architecture where processing elements correspond to dense bit cells, providing local storage and compute, typically employing analog operation. Though this raises the potential for high energy efficiency and throughput, analog operation has significantly limited robustness, scale, and programmability. This paper describes a 590kb in-memory-computing accelerator integrated in a programmable processor architecture, by exploiting recent approaches to charge-domain in-memory computing. The architecture takes the approach of tight coupling with an embedded CPU, through accelerator interfaces enabling integration in the standard processor memory space. Additionally, a near-memory-computing datapath both enables diverse computations locally, to address operations required across applications, and enables bit-precision scalability for matrix/input-vector elements, through a bit-parallel/bit-serial (BP/BS) scheme. Chip measurements show an energy efficiency of 152/297 1b-TOPS/W and throughput of 4.7/1.9 1b-TOPS (scaling linearly with the matrix/input-vector element precisions) at VDD of 1.2/0.85V. Neural network demonstrations with 1-b/4-b weights and activations for CIFAR-10 classification consume 5.3/105.2 $\mu$J/image at 176/23 fps, with accuracy at the level of digital/software implementation (89.3/92.4 $\%$ accuracy).