Search

In a clinical context, conventional optical microscopy is commonly used for the visualization of biological samples for diagnosis. However, the availability of molecular techniques and rapid diagnostic tests are reducing the use of conventional microscopy, and consequently the number of experienced professionals starts to decrease. Moreover, the continuous visualization during long periods of time through an optical microscope could affect the final diagnosis results due to induced human errors and fatigue. Therefore, microscopy automation is a challenge to be achieved and address this problem. The aim of the study is to develop a low-cost automated system for the visualization of microbiological/parasitological samples by using a conventional optical microscope, and specially designed for its implementation in resource-poor settings laboratories. A 3D-prototype to automate the majority of conventional optical microscopes was designed. Pieces were built with 3D-printing technology and polylactic acid biodegradable material with Tinkercad/Ultimaker Cura 5.1 slicing softwares. The system's components were divided into three subgroups: microscope stage pieces, storage/autofocus-pieces, and smartphone pieces. The prototype is based on servo motors, controlled by Arduino open-source electronic platform, to emulate the X-Y and auto-focus (Z) movements of the microscope. An average time of 27.00 ± 2.58 seconds is required to auto-focus a single FoV. Auto-focus evaluation demonstrates a mean average maximum Laplacian value of 11.83 with tested images. The whole automation process is controlled by a smartphone device, which is responsible for acquiring images for further diagnosis via convolutional neural networks. The prototype is specially designed for resource-poor settings, where microscopy diagnosis is still a routine process. The coalescence between convolutional neural network predictive models and the automation of the movements of a conventional optical microscope confer the system a wide range of image-based diagnosis applications. The accessibility of the system could help improve diagnostics and provide new tools to laboratories worldwide. [ABSTRACT FROM AUTHOR]

Introduction: Malaria is one of the most prevalent infectious diseases in subSaharan Africa, with 247 million cases reported worldwide in 2021 according to the World Health Organization. Optical microscopy remains the gold standard technique for malaria diagnosis, however, it requires expertise, is time-consuming and difficult to reproduce. Therefore, new diagnostic techniques based on digital image analysis using artificial intelligence tools can improve diagnosis and help automate it. Methods: In this study, a dataset of 2571 labeled thick blood smear images were created. YOLOv5x, Faster R-CNN, SSD, and RetinaNet object detection neural networks were trained on the same dataset to evaluate their performance in Plasmodium parasite detection. Attention modules were applied and compared with YOLOv5x results. To automate the entire diagnostic process, a prototype of 3D-printed pieces was designed for the robotization of conventional optical microscopy, capable of auto-focusing the sample and tracking the entire slide. Results: Comparative analysis yielded a performance for YOLOv5x on a test set of 92.10% precision, 93.50% recall, 92.79% F-score, and 94.40% mAP0.5 for leukocyte, early and mature Plasmodium trophozoites overall detection. F-score values of each category were 99.0% for leukocytes, 88.6% for early trophozoites and 87.3% for mature trophozoites detection. Attention modules performance show non-significant statistical differences when compared to YOLOv5x original trained model. The predictive models were integrated into a smartphone-computer application for the purpose of image-based diagnostics in the laboratory. The system can perform a fully automated diagnosis by the auto-focus and X-Y movements of the robotized microscope, the CNN models trained for digital image analysis, and the smartphone device. The new prototype would determine whether a Giemsa-stained thick blood smear sample is positive/negative for Plasmodium infection and its parasite levels. The whole system was integrated into the iMAGING smartphone application. Conclusion: The coalescence of the fully-automated system via auto-focus and slide movements and the autonomous detection of Plasmodium parasites in digital images with a smartphone software and AI algorithms confers the prototype the optimal features to join the global effort against malaria, neglected tropical diseases and other infectious diseases. [ABSTRACT FROM AUTHOR]

Background: In 2020, SARS-CoV-2 and the COVID-19 pandemic had a huge impact on the access to and provision of ART treatments. Gradually, knowledge of the virus and its transmission has become available, allowing ART activities to resume. Still, questions on the impact of the virus on human gametes and fertility remain.Objective and Rationale: This article summarizes published data, aiming to clarify the impact of SARS-CoV-2 and the COVID-19 disease on human fertility and assisted reproduction, as well as the impact of vaccination, and from this, provide answers to questions that are relevant for people contemplating pregnancy and for health care professionals.Search Methods: PUBMED/MEDLINE and the WHO COVID-19 database were searched from inception to 5 October 2022 with search terms focusing on 'SARS-CoV-2' and gametes, embryos, reproductive function, fertility and ART. Non-English studies and papers published prior to 2020 were excluded, as well as reviews and non-peer reviewed publications. Full papers were assessed for relevance and quality, where feasible.Outcomes: From the 148 papers included, the following observations were made. The SARS-CoV-2-binding proteins, angiotensin-converting enzyme 2 (ACE2) and type II transmembrane serine protease (TMPRSS2), are expressed in the testis, but co-expression remains to be proven. There is some evidence of SARS-CoV-2 RNA in the ejaculate of COVID-19 patients with severe disease, but not in those with mild/moderate disease. SARS-CoV-2 infection can impair spermatogenesis, but this seems to resolve after one spermatogenic cycle. Testosterone levels seem to be lower during and after COVID-19, but long-term data are lacking; disease severity may be associated with testosterone levels. COVID-19 cannot be considered a sexually transmitted disease. There is no co-expression of ACE2 and TMPRSS2 in the myometrium, uterus, ovaries or fallopian tubes. Oocytes seem to have the receptors and protease machinery to be susceptible to SARS-CoV-2 infection; however, viral RNA in oocytes has not been detected so far. Women contemplating pregnancy following COVID-19 may benefit from screening for thyroid dysfunction. There is a possible (transient) impact of COVID-19 on menstrual patterns. Embryos, and particularly late blastocysts, seem to have the machinery to be susceptible to SARS-CoV-2 infection. Most studies have not reported a significant impact of COVID-19 on ovarian reserve, ovarian function or follicular fluid parameters. Previous asymptomatic or mild SARS-CoV-2 infection in females does not seem to negatively affect laboratory and clinical outcomes of ART. There are no data on the minimum required interval, if any, between COVID-19 recovery and ART. There is no evidence of a negative effect of SARS-CoV-2 vaccination on semen parameters or spermatogenesis, ovarian function, ovarian reserve or folliculogenesis. A transient effect on the menstrual cycle has been documented. Despite concerns, cross reactivity between anti-SARS-CoV-2 spike protein antibodies and Syncytin-1, an essential protein in human implantation, is absent. There is no influence of mRNA SARS-CoV-2 vaccine on patients' performance during their immediate subsequent ART cycle. Pregnancy rates post-vaccination are similar to those in unvaccinated patients.Wider Implications: This review highlights existing knowledge on the impact of SARS-CoV-2 infection or COVID-19 on fertility and assisted reproduction, but also identifies gaps and offers suggestions for future research. The knowledge presented should help to provide evidence-based advice for practitioners and couples contemplating pregnancy alike, facilitating informed decision-making in an environment of significant emotional turmoil. [ABSTRACT FROM AUTHOR]