Search

Background: Bacillus subtilis is an important cell factory for the biotechnological industry due to its ability to secrete commercially relevant proteins in large amounts directly into the growth medium. However, hyper-secretion of proteins, such as α-amylases, leads to induction of the secretion stress-responsive CssR-CssS regulatory system, resulting in up-regulation of the HtrA and HtrB proteases. These proteases degrade misfolded proteins secreted via the Sec pathway, resulting in a loss of product. The aim of this study was to investigate the secretion stress response in B. subtilis 168 cells overproducing the industrially relevant α-amylase AmyM from Geobacillus stearothermophilus, which was expressed from the strong promoter P(amyQ)-M., Results: Here we show that activity of the htrB promoter as induced by overproduction of AmyM was "noisy", which is indicative for heterogeneous activation of the secretion stress pathway. Plasmids were constructed to allow real-time analysis of P(amyQ)-M promoter activity and AmyM production by, respectively, transcriptional and out-of-frame translationally coupled fusions with gfpmut3. Our results show the emergence of distinct sub-populations of high- and low-level AmyM-producing cells, reflecting heterogeneity in the activity of P(amyQ)-M. This most likely explains the heterogeneous secretion stress response. Importantly, more homogenous cell populations with regard to P(amyQ)-M activity were observed for the B. subtilis mutant strain 168degUhy32, and the wild-type strain 168 under optimized growth conditions., Conclusion: Expression heterogeneity of secretory proteins in B. subtilis can be suppressed by degU mutation and optimized growth conditions. Further, the out-of-frame translational fusion of a gene for a secreted target protein and gfp represents a versatile tool for real-time monitoring of protein production and opens novel avenues for Bacillus production strain improvement.

White rot fungus Dichomitus squalens is an efficient lignocellulose degrading basidiomycete and a promising source for new plant cell wall polysaccharides depolymerizing enzymes. In this work, we focused on cellobiohydrolases (CBHs) of D. squalens. The native CBHI fraction of the fungus, consisting three isoenzymes, was purified and it maintained the activity for 60 min at 50°C, and was stable in acidic pH. Due to the lack of enzyme activity assay for detecting only CBHII activity, CBHII of D. squalens was produced recombinantly in an industrially important ascomycete host, Trichoderma reesei. CBH enzymes of D. squalens showed potential in hydrolysis of complex lignocellulose substrates sugar beet pulp and wheat bran, and microcrystalline cellulose, Avicel. Recombinant CBHII (rCel6A) of D. squalens hydrolysed all the studied plant biomasses. Compared to individual activities, synergistic effect between rCel6A and native CBHI fraction of D. squalens was significant in the hydrolysis of Avicel. Furthermore, the addition of laccase to the mixture of CBHI fraction and rCel6A significantly enhanced the amount of released reducing sugars from sugar beet pulp. Especially, synergy between individual enzymes is a crucial factor in the tailor-made enzyme mixtures needed for hydrolysis of different plant biomass feedstocks. Our data supports the importance of oxidoreductases in improved enzyme cocktails for lignocellulose saccharification.

The cellulase and hemicellulase genes of the filamentous fungus Trichoderma reesei have been shown to be under carbon catabolite repression mediated by the regulatory gene cre1. In this study, strains were constructed in which the cre1 gene was either completely removed or replaced by a truncated mutant variant, cre1-1, found previously in the Rut-C30 mutant strain with enhanced enzyme production capability. The T. reesei transformants with either deletion or truncation of cre1 had clearly altered colony morphology compared with the parental strains, forming smaller colonies and fewer aerial hyphae and spores. Liquid cultures in a medium with glucose as a carbon source showed that the transformants were derepressed in cellulase and hemicellulase production. Interestingly, they also produced significantly elevated levels of these hydrolytic enzymes in fermentations carried out in a medium inducing the hydrolase genes. This suggests that cre1 acts as a modulator of cellulase and hemicellulase gene expression under both noninducing and inducing conditions. There was no phenotypic difference between the Deltacre1 and cre1-1 mutant strains in any of the experiments done, indicating that the cre1-1 gene is practically a null allele. The results of this work indicate that cre1 is a valid target gene in strain engineering for improved enzyme production in T. reesei.

Two different types of approach were taken to improve the hydrolytic activity towards crystalline cellulose at elevated temperatures of Melanocarpus albomyces Cel7B (Ma Cel7B), a single-module GH-7 family cellobiohydrolase. Structure-guided protein engineering was used to introduce an additional tenth disulphide bridge to the Ma Cel7B catalytic module. In addition, a fusion protein was constructed by linking a cellulose-binding module (CBM) and a linker from the Trichoderma reesei Cel7A to the C terminus of Ma Cel7B. Both approaches proved successful. The disulphide bridge mutation G4C/M70C located near the N terminus, close to the entrance of the active site tunnel of Ma Cel7B, led to improved thermostability (DeltaT (m) = 2.5 degrees C). By adding the earlier found thermostability-increasing mutation S290T (DeltaT (m) = 1.5 degrees C) together with the disulphide bridge mutation, the unfolding temperature was increased by 4 degrees C (mutant G4C/M70C/S290T) compared to that of the wild-type enzyme, thus showing an additive effect on thermostability. Both disulphide mutants had increased activity towards microcrystalline cellulose (Avicel) at 75 degrees C, apparently solely because of their improved thermostability. The addition of a CBM also improved the thermostability (DeltaT (m) = 2.5 degrees C) and caused a clear (sevenfold) increase in the hydrolysis activity of Ma Cel7B towards Avicel at 70 degrees C.

As part of the effort to find better cellulases for bioethanol production processes, we were looking for novel GH-7 family cellobiohydrolases, which would be particularly active on insoluble polymeric substrates and participate in the rate-limiting step in the hydrolysis of cellulose. The enzymatic properties were studied and are reported here for family 7 cellobiohydrolases from the thermophilic fungi Acremonium thermophilum, Thermoascus aurantiacus, and Chaetomium thermophilum. The Trichoderma reesei Cel7A enzyme was used as a reference in the experiments. As the native T. aurantiacus Cel7A has no carbohydrate-binding module (CBM), recombinant proteins having the CBM from either the C. thermophilum Cel7A or the T. reesei Cel7A were also constructed. All these novel acidic cellobiohydrolases were more thermostable (by 4-10 degrees C) and more active (two- to fourfold) in hydrolysis of microcrystalline cellulose (Avicel) at 45 degrees C than T. reesei Cel7A. The C. thermophilum Cel7A showed the highest specific activity and temperature optimum when measured on soluble substrates. The most effective enzyme for Avicel hydrolysis at 70 degrees C, however, was the 2-module version of the T. aurantiacus Cel7A, which was also relatively weakly inhibited by cellobiose. These results are discussed from the structural point of view based on the three-dimensional homology models of these enzymes., ((c) 2008 Wiley Periodicals, Inc.)

Three thermostable neutral cellulases from Melanocarpus albomyces, a 20-kDa endoglucanase (Cel45A), a 50-kDa endoglucanase (Cel7A), and a 50-kDa cellobiohydrolase (Cel7B) heterologously produced in a recombinant Trichoderma reesei were purified and studied in hydrolysis (50 degrees C, pH 6.0) of crystalline and amorphous cellulose. To improve their efficiency, M. albomyces cellulases naturally harboring no cellulose-binding module (CBM) were genetically modified to carry the CBM of T. reesei CBHI/Cel7A, and were studied under similar experimental conditions. Hydrolysis performance and product profiles were used to evaluate hydrolytic features of the investigated enzymes. Each cellulase proved to be active against the tested substrates; the cellobiohydrolase Cel7B had greater activity than the endoglucanases Cel45A and Cel7A against crystalline cellulose, whereas in the case of amorphous substrate the order was reversed. Evidence of synergism was observed when mixtures of the novel enzymes were applied in a constant total protein dosage. Presence of the CBM improved the hydrolytic potential of each enzyme in all experimental configurations; it had a greater effect on the endoglucanases Cel45A and Cel7A than the cellobiohydrolase Cel7B, especially against crystalline substrate. The novel cellobiohydrolase performed comparably to the major cellobiohydrolase of T. reesei (CBHI/Cel7A) under the applied experimental conditions.

Cellobiohydrolase from Melanocarpus albomyces (Cel7B) is a thermostable, single-module, cellulose-degrading enzyme. It has relatively low catalytic activity under normal temperatures, which allows structural studies of the binding of unmodified substrates to the native enzyme. In this study, we have determined the crystal structure of native Ma Cel7B free and in complex with three different cello-oligomers: cellobiose (Glc(2)), cellotriose (Glc(3)), and cellotetraose (Glc(4)), at high resolution (1.6-2.1 A). In each case, four molecules were found in the asymmetric unit, which provided 12 different complex structures. The overall fold of the enzyme is characteristic of a glycoside hydrolase family 7 cellobiohydrolase, where the loops extending from the core beta-sandwich structure form a long tunnel composed of multiple subsites for the binding of the glycosyl units of a cellulose chain. The catalytic residues at the reducing end of the tunnel are conserved, and the mechanism is expected to be retaining similarly to the other family 7 members. The oligosaccharides in different complex structures occupied different subsite sets, which partly overlapped and ranged from -5 to +2. In four cellotriose and one cellotetraose complex structures, the cello-oligosaccharide also spanned over the cleavage site (-1/+1). There were surprisingly large variations in the amino acid side chain conformations and in the positions of glycosyl units in the different cello-oligomer complexes, particularly at subsites near the catalytic site. However, in each complex structure, all glycosyl residues were in the chair (4C(1)) conformation. Implications in relation to the complex structures with respect to the reaction mechanism are discussed.

Cellobiohydrolases are enzymes that cleave off cellobiose units from cellulose chains in a processive manner. Melanocarpus albomyces Cel7B is a thermostable single-module cellobiohydrolase that has relatively low activity on small soluble substrates at room temperature. It belongs to glycoside hydrolase family 7, which includes endo-beta-1,4-glucanases and cellobiohydrolases. Cel7B was crystallized using the hanging-drop vapour-diffusion method and streak-seeding. The crystals belonged to space group P2(1), with unit-cell parameters a = 50.9, b = 94.5, c = 189.8 A, beta = 90.0 degrees and four monomers in the asymmetric unit. Analysis of the intensity statistics showed that the crystals were pseudo-merohedrally twinned, with a twinning fraction of 0.37. X-ray diffraction data were collected at 1.6 A resolution using synchrotron radiation.

Three endoxylanase genes were cloned from the thermophilic fungus Chaetomium thermophilum CBS 730.95. All genes contained the typical consensus sequence of family 11 glycoside hydrolases. Genomic copies of Ct xyn11A, Ct xyn11B, and Ct xyn11C were expressed in the filamentous fungus T. reesei under the control of the strong T. reesei cel7A (cellobiohydrolase 1, cbh1) promoter. The molecular masses of the Ct Xyn11A, Ct Xyn11B, and Ct Xyn11C proteins on sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) were 27, 23, and 22 kDa, respectively. Ct Xyn11A was produced almost as efficiently as the homologous xylanase II from a corresponding single-copy transformant strain. Ct Xyn11B production level was approximately half of that of Ct Xyn11A. The amount of Ct Xyn11C was remarkably lower. Ct Xyn11A had the highest temperature optimum and stability of the recombinant xylanases and the highest activity at acid-neutral pH (pH 5-7). It was the most suitable for industrial bleaching of kraft pulp at high temperature.

The extracellular bga1-encoded beta-galactosidase of Hypocrea jecorina (Trichoderma reesei) was overexpressed under the pyruvat kinase (pki1) promoter region and purified to apparent homogeneity. The monomeric enzyme is a glycoprotein with a molecular mass of 118.8 +/- 0.5 kDa (MALDI-MS) and an isoelectric point of 6.6. Bga1 is active with several disaccharides, e.g. lactose, lactulose and galactobiose, as well as with aryl- and alkyl-beta-D-galactosides. Based on the catalytic efficiencies, lactitol and lactobionic acid are the poorest substrates and o-nitrophenyl-beta-D-galactoside and lactulose are the best. The pH optimum for the hydrolysis of galactosides is approximately 5.0, and the optimum temperature was found to be 60 degrees C. Bga1 is also capable of releasing D-galactose from beta-galactans and is thus actually a galacto-beta-D-galactanase. beta-Galactosidase is inhibited by its reaction product D-galactose and the enzyme also shows a significant transferase activity which results in the formation of galacto-oligosaccharides.

To develop functional enzymes in cellulose hydrolysis at or above 70 degrees C the cellobiohydrolase (CBHI/Cel7A) of Thermoascus aurantiacus was cloned and expressed in Trichoderma reesei Rut-C30 under the strong cbh1 promoter. Cellulase production of the parental strain and the novel strain (RF6026) was examined in submerged fermentation experiments using various carbon sources, which were lactose, Solka Floc 200 cellulose powder, and steam pretreated corn stover. An industrially feasible production medium was used containing only distiller's spent grain, KH(2)PO(4), and (NH(4))(2)SO(4). Enzyme production was followed by measurements of protein concentration, total cellulase enzyme activity (filter paper activity), beta-glucosidase activity, CBHI activity, and endogenase I (EGI) activity. The Thermoascus CBHI/Cel7A activity was taken as an indication of the heterologous gene expression under the cbh1 promoter.

Thermostable enzymes offer potential benefits in the hydrolysis of lignocellulosic substrates; higher specific activity decreasing the amount of enzymes, enhanced stability allowing improved hydrolysis performance and increased flexibility with respect to process configurations, all leading to improvement of the overall economy of the process. New thermostable cellulase mixtures were composed of cloned fungal enzymes for hydrolysis experiments. Three thermostable cellulases, identified as the most promising enzymes in their categories (cellobiohydrolase, endoglucanase and beta-glucosidase), were cloned and produced in Trichoderma reesei and mixed to compose a novel mixture of thermostable cellulases. Thermostable xylanase was added to enzyme preparations used on substrates containing residual hemicellulose. The new optimised thermostable enzyme mixtures were evaluated in high temperature hydrolysis experiments on technical steam pretreated raw materials: spruce and corn stover. The hydrolysis temperature could be increased by about 10-15 degrees C, as compared with present commercial Trichoderma enzymes. The same degree of hydrolysis, about 90% of theoretical, measured as individual sugars, could be obtained with the thermostable enzymes at 60 degrees C as with the commercial enzymes at 45 degrees C. Clearly more efficient hydrolysis per assayed FPU unit or per amount of cellobiohydrolase I protein used was obtained. The maximum FPU activity of the novel enzyme mixture was about 25% higher at the optimum temperature at 65 degrees C, as compared with the highest activity of the commercial reference enzyme at 60 degrees C. The results provide a promising basis to produce and formulate improved enzyme products. These products can have high temperature stability in process conditions in the range of 55-60 degrees C (with present industrial products at 45-50 degrees C) and clearly improved specific activity, essentially decreasing the protein dosage required for an efficient hydrolysis of lignocellulosic substrates. New types of process configurations based on thermostable enzymes are discussed.

Lactose is the only soluble and economically feasible carbon source for the production of cellulases or heterologous proteins regulated by cellulase expression signals by Hypocrea jecorina (Trichoderma reesei). We investigated the role of the major beta-galactosidase of H. jecorina in lactose metabolism and cellulase induction. A genomic copy of the bga1 gene was cloned, and this copy encodes a 1,023-amino-acid protein with a 20-amino-acid signal sequence. This protein has a molecular mass of 109.3 kDa, belongs to glycosyl hydrolase family 35, and is the major extracellular beta-galactosidase during growth on lactose. Its transcript was abundant during growth on l-arabinose and l-arabinitol but was much less common when the organism was grown on lactose, d-galactose, galactitol, d-xylose, and xylitol. Deltabga1 strains grow more slowly and accumulate less biomass on lactose, but the cellobiohydrolase I and II gene expression and the final cellulase yields were comparable to those of the parental strain. Overexpression of bga1 under the control of the pyruvate kinase promoter reduced the lag phase, increased growth on lactose, and limited transcription of cellobiohydrolases. We detected an additional extracellular beta-galactosidase activity that was not encoded by bga1 but no intracellular beta-galactosidase activity. In conclusion, cellulase production on lactose occurs when beta-galactosidase activity levels are low but decreases as the beta-galactosidase activities increase. The data indicate that bga1-encoded beta-galactosidase activity is a critical factor for cellulase production on lactose.

Thermal stability and other functional properties of Trichoderma reesei endo-1,4-beta-xylanase II (XYNII; family 11) were studied by designed mutations. Mutations at three positions were introduced to the XYNII mutant containing a disulfide bridge (S110C-N154C) in the alpha-helix. The disulfide bridge increased the half-life of XYNII from less than 1 min to 14 min at 65 degrees C. An additional mutation at the C-terminus of the alpha-helix (Q162H or Q162Y) increased the half-life to 63 min. Mutations Q162H and Q162Y alone had a stabilizing effect at 55 degrees C but not at 65 degrees C. The mutations N11D and N38E increased the half-life to about 100 min. Due to the stabilizing mutations the pH stability increased in a wide pH range, but at the same time the activity decreased both in acidic and neutral-alkaline pH, the pH optimum being at pH region 5-6. There was no essential difference between the specific activities of the mutants and the wild-type XYNII.

The signal peptidase (SPase) SipS of Bacillus subtilis is responsible for the processing of precursors of secreted proteins. It differs from the SPases of Gram-negative bacteria in structure and specificity. To assay the activity of SipS in vitro, two efficient transcription-translation systems for the synthesis of radio-labelled precursors were developed. The systems were completely derived from B. subtilis. Post-translational in vitro processing of pre-staphylokinase by SipS was demonstrated. SipS activity was stimulated in vitro by several non-ionic detergents, whereas it was not affected by a large variety of proteinase inhibitors. SipS shares the latter property with other SPases.

Signal peptidases (SPases) remove signal peptides from secretory proteins. The sipS (signal peptidase of subtilis) gene, which encodes an SPase of Bacillus subtilis, was cloned in Escherichia coli and was also found to be active in E.coli. Its overproduction in B.subtilis resulted in increased rates of processing of a hybrid beta-lactamase precursor. The SipS protein consisted of 184 amino acids (mol. wt 21 kDa). The protein showed sequence similarity with the leader peptidases of E.coli and Salmonella typhimurium, and the mitochondrial inner membrane protease I of Saccharomyces cerevisiae. Patterns of conserved amino acids present in these four proteins were also detected in the Sec11 subunit of the SPase complex of S.cerevisiae and the 18 and 21 kDa subunits of the canine SPase complex. Knowledge of the sequence of SipS was essential for the detection of these similarities between prokaryotic and eukaryotic SPases. The data suggest that these proteins, which have analogous functions, belong to one class of enzymes, the type I SPases.

Application of modern gene technology to strain improvement of the industrially important bacterium Bacillus amyloliquefaciens is reported. Several different plasmid constructions carrying the alpha-amylase gene (amyE) from B. amyloliquefaciens were amplified in this species either extrachromosomally or intrachromosomally. The amyE gene cloned on a pUB110-derived high copy plasmid pKTH10 directed the highest yields both in rich laboratory medium and in crude industrial medium. The alpha-amylase activity, when compared with the parental strain, was enhanced up to 20-fold in the pKTH 10 transformant. This strain showed decreased activities for other exoenzymes, such as proteases and beta-glucanase suggesting common limiting resources in the processing of these enzymes. Deletions were made in vitro in genes encoding neutral (nprE), alkaline (aprE) protease and beta-glucanase (bglA). The engineered genes were cloned into the thermosensitive plasmid pE194, and the resulting plasmids were used to replace the corresponding wild type chromosomal genes in B. amyloliquefaciens by integration-excision at non-permissive temperature. The double mutant deficient in the major proteases (delta nprE delta aprE) showed about a 2-fold further enhancement in alpha-amylase production in the industrial medium compared with the relevant wild type background, [corrected] both when plasmid-free and when transformed with pKTH10; this strain also produced elevated levels of the chromosomally-encoded beta-glucanase; pKTH10 was stably maintained both in the wild type strain and in the delta nprE delta aprE mutant. We suggest that the higher yields in alpha-amylase and beta-glucanase in the delta nprE delta aprE strain are primarily due to improved access to limiting resources, and that decreased proteolytic degradation may have had a secondary role in retaining the high activity obtained.

A method for transformation of whole Bacillus amyloliquefaciens cells by electroporation was developed. The procedure is as efficient as the protoplast transformation method, resulting in up to 10(5) transformants/micrograms plasmid DNA, but requires less effort and time. Cells for electroporation were grown to late exponential phase in a rich medium supplemented with 0.25 M sucrose, washed with and resuspended in 0.25 M sucrose, 1 mM HEPES, 1 mM MgCl2, 10% (v/v) glycerol, pH 7.0, at 3-5 x 10(10) cells/ml for storage at -80 degrees C. The highest transformation frequency was obtained at 7.5 kV/cm with a 25 microF capacitor. The transformation efficiency increased linearly with DNA concentration at least over the range 10 ng-12.5 micrograms/ml. Transformations with ligated DNA and of industrial strains were also successful. In addition, B. subtilis cells treated as above could be transformed by electroporation, resulting in 10(4) transformants/micrograms DNA at 12.5 kV/cm.

Several Acetobacteria contained large amounts of spermine in addition to the putrescine and spermidine, which are the polyamines normally found in prokaryotes. A spermine synthase present in cell extracts of these Acetobacteria is the first example of this enzyme in prokaryotes. Dicyclohexylammonium sulphate inhibited both spermidine synthase and spermine synthase activities in Acetobacteria. Their ornithine decarboxylase was not stimulated by GTP nor inhibited by ppGpp and pppGpp (magic spots I and II) in contrast to ornithine decarboxylase of nearly all bacteria studied so far. However, their S-adenosyl-L-methionine decarboxylase resembled other prokaryotic adenosylmethionine decarboxylases in requiring Mg2+ ions in vitro for full activity.