Search

Storage change in heat in the soil is one of the main components of the energy balance and is essential in studying the land-Atmosphere heat exchange. However, its measurement proves to be difficult due to (vertical) soil heterogeneity and sensors easily disturbing the soil. Improvements in the precision and resolution of distributed temperature sensing (DTS) equipment has resulted in its widespread use in geoscientific studies. Multiple studies have shown the added value of spatially distributed measurements of soil temperature and soil heat flux. However, due to the spatial resolution of DTS measurements (g1/430gcm), soil temperature measurements with DTS have generally been restricted to (horizontal) spatially distributed measurements. This paper presents a device which allows high-resolution measurements of (vertical) soil temperature profiles by making use of a 3D-printed screw-like structure. A 50gcm tall probe is created from segments manufactured with fused-filament 3D printing and has a helical groove to guide and protect a fiber-optic (FO) cable. This configuration increases the effective DTS measurement resolution and will inhibit preferential flow along the probe. The probe was tested in the field, where the results were in agreement with the reference sensors. The high vertical resolution of the DTS-measured soil temperature allowed determination of the thermal diffusivity of the soil at a resolution of 2.5gcm, many times better than what is feasible using discrete probes. A future improvement in the design could be the use of integrated reference temperature probes, which would remove the need for DTS calibration baths. This could, in turn, support making the probes "plug and play"into the shelf instruments without the need to splice cables or experience in DTS setup design. The design can also support the integration of an electrical conductor into the probe and allow heat tracer experiments to derive both the heat capacity and the thermal conducti, Atmospheric Remote Sensing, Water Resources

Plant roots are highly adaptable, but their adaptability is not included in crop and land surface models. They rely on a simplified representation of root growth, which is independent of soil moisture availability. Data of subsurface processes and interactions, needed for model setup and validation, are scarce. Here we investigated soil-moisture-driven root growth. To this end, we installed subsurface drip lines and small soil moisture sensors (0.2 L measurement volume) inside rhizoboxes (length × width × height of 45 × 7.5 × 45 cm). The development of the vertical soil moisture and root growth profiles is tracked with a high spatial and temporal resolution. The results confirm that root growth is predominantly driven by vertical soil moisture distribution, while influencing soil moisture at the same time. Besides support for the functional relationship between the soil moisture and the root density growth rate, the experiments also suggest that the extension of the maximum rooting depth will stop if the soil moisture at the root tip drops below a threshold value. We show that even a parsimonious one-dimensional water balance model, driven by the water input flux (irrigation), can be convincingly improved by implementing root growth driven by soil moisture availability., Water Resources, Atmospheric Remote Sensing

Wind machines have been increasingly used for frost damage mitigation in the agricultural community. During radiative frost nights, wind machines are used to erode near-surface thermal inversion by air mixing. The underlying mixing processes remain poorly understood. A full picture of warming effects caused by air mixing requires measurements with wide coverage and high resolution. Our study aimed to quantify the magnitude and area of warming by air mixing and identify the characteristic mixing processes downwind and upwind. We installed 9 km of fiber optic cables in a 6.75 ha orchard block, creating two horizontal planes and three vertical profiles. Quasi-3D temperature responses with spatial sampling and temporal resolution of 25 cm and 10 s, respectively, were obtained before and during machine operation. We found a 50% reduction of the local inversion strength (8 K) over 0.42 ha at 1 m and 0.46 ha at 2 m height. The warming area for a 30% reduction extends to 2.81 and 2.52 ha, respectively. As the propeller rotates 360°, the weak background wind substantially impacts the air mixing processes downwind and upwind. When jets blow along with background wind, the warming plumes arrive earlier than the jet due to horizontal advection from earlier warmed sections. The warming plumes consequently accumulate downwind and penetrate deep into the canopy. In contrast, in upwind direction, wind drag resistance causes warming plumes arrive later than the jet. Quadrant analysis reveals that flux transport during the machine operation is dominated by sweeping and ejection motions. Intermittent downdrafts of warm air and updrafts of cool air result in efficient vertical heat exchange. This feature makes wind machines highly effective in raising canopy airspace temperature to mitigate frost damage., Atmospheric Remote Sensing, Water Resources

To mitigate spring frost damage, fruit farmers use wind machines to mix warm overlying air down to the vegetation. Up to this point, studies on wind machine efficiency have focused on air temperatures. The temperature of different plant organs during operation remains unknown, while critical for the actual degree of frost damage. With Distributed Temperature Sensing we measured vertical in-canopy air temperature profiles in a pear orchard in the Netherlands and thermistors were installed to determine the plant tissue temperatures. We found that to optimize wind machine operation, it is important to consider two effects of a wind machine: (1) mixing of stratified air above and into the canopy layer and (2) erosion of the leaf boundary layer to facilitate plant–air heat exchange. We show how foliage reduces plume penetration to the ground with distance to the wind machine. Due to this blocking at least 15 rotations (∼ 75 min) are needed for optimal mixing. Leaf temperatures lag behind air temperatures, due to strong radiative cooling. We found that over the rotation cycle of a wind machine the temperature difference between leaf and air is variable as convective warming repeatedly dominates over radiative cooling. This is different for flowers and shoots due to different heat capacities. Thin flower petals store little heat and are almost in direct equilibrium with air temperature changes. Shoots, with their higher heat capacity and lower surface/volume ratio, store more heat during the day that is slowly released at night. This discrepancy between plant and air temperature should be considered for frost damage prediction., Water Resources, Atmospheric Remote Sensing

Heat transport through short and closed vegetation such as grass is modelled by a simple diffusion process. The grass is treated as a homogeneous ‘sponge layer’ with uniform thermal diffusivity and conductivity, placed on top of the soil. The temperature and heat-flux dynamics in both vegetation and soil are described using harmonic analysis. All thermal properties have been determined by optimization against observations from the Haarweg climatological station in The Netherlands. Our results indicate that both phase and amplitude of soil temperatures can be accurately reproduced from the vegetation surface temperature. The diffusion approach requires no specific tuning to, for example, the daily cycle, but instead responds to all frequencies present in the input data, including quick changes in cloud cover and day– night transitions. The newly determined heat flux at the atmosphere–vegetation interface is compared with the other components of the surface energy balance at this interface. The budget is well-closed, particularly in the most challenging cases with varying cloud cover and during transition periods. We conclude that the diffusion approach (either implemented analytically or numerically) is a physically consistent alternative to more ad hoc methods, like ‘skin resistance’ approaches for vegetation and bulk correction methods for upper soil heat storage. However, more work is needed to evaluate parameter variability and robustness under different climatological conditions. From a numerical perspective, the present representation of vegetation allows for both slow and rapid feedbacks between the atmosphere and the surface. As such, it would be interesting to couple the present surface parametrization to turbulence-resolving models, such as large-eddy simulations., Atmospheric Remote Sensing

Despite the importance of forests in the water and carbon cycles, accurately measuring their contribution remains challenging, especially at night. During clear-sky nights current models and theories fail, as non-turbulent flows and spatial heterogeneity become more important. One of the standing issues is the ‘decoupling’ of the air masses in and above the canopy, where little turbulent exchange takes place, thus preventing proper measurement of atmospheric fluxes. Temperature inversions, where lower air is colder and thus more dense, can be both the cause and result of this decoupling. With Distributed Temperature Sensing (DTS) it is now possible to detect these temperature inversions, and increase our understanding of the decoupling mechanism. With DTS we detected strong inversions within the canopy of a tall Douglas Fir stand. The inversions formed in on clear-sky nights with low turbulence, and preferentially formed in the open understory. A second inversion regularly occurred above the canopy. Oscillations in this upper inversion transferred vertically through the canopy and induced oscillations in the lower inversion. We hypothesize that the inversions could form due to a local suppression of turbulent motions along the height of the canopy. This was supported by a 1-D conceptual model, which showed that a local inversion layer would always form within the canopy if the bulk inversion (over the full canopy) was strong enough. Due to the near-continuous vertical motion and specific height the inversions occur at, a very high measurement density (better than ∼2 m) and measurement frequency (>0.1 Hz) are required to detect them. Consequently, it could be possible that the observed inversions are a regular feature in similarly structured forests, but are generally not directly observed. With DTS it is possible to detect and describe these types of features, which will aid in improving our understanding of atmospheric flows over complex terrain such as fores, Atmospheric Remote Sensing, Water Resources

Background: Both influenza and SARS-CoV-2 viruses show a strong seasonal spreading in temperate regions. Several studies indicated that changes in indoor humidity could be one of the key factors explaining this. Objective: The purpose of this study is to quantify the association between relevant epidemiological metrics and humidity in both influenza and SARS-CoV-2 epidemic periods. Methods: The atmospheric dew point temperature serves as a proxy for indoor relative humidity. This study considered the weekly mortality rate in the Netherlands between 1995 and 2019 to determine the correlation between the dew point and the spread of influenza. During influenza epidemic periods in the Netherlands, governmental restrictions were absent; therefore, there is no need to control this confounder. During the SARS-CoV-2 pandemic, governmental restrictions strongly varied over time. To control this effect, periods with a relatively constant governmental intervention level were selected to analyze the reproduction rate. We also examine SARS-CoV-2 deaths in the nursing home setting, where health policy and social factors were less variable. Viral transmissibility was measured by computing the ratio between the estimated daily number of infectious persons in the Netherlands and the lagged mortality figures in the nursing homes. Results: For both influenza and SARS-CoV-2, a significant correlation was found between the dew point temperature and the aforementioned epidemiological metrics. The findings are consistent with the anticipated mechanisms related to droplet evaporation, stability of virus in the indoor environment, and impairment of the natural defenses of the respiratory tract in dry air. Significance: This information is helpful to understand the seasonal pattern of respiratory viruses and motivate further study to what extent it is possible to alter the seasonal pattern by actively intervening in the adverse role of low humidity during fall and winter in temperate regi, Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisheris the copyright holder of this work and the author uses the Dutch legislation to make this work public., Offshore and Dredging Engineering, Atmospheric Remote Sensing

Complex ecosystems such as forests make accurately measuring atmospheric energy and matter fluxes difficult. One of the issues that can arise is that parts of the canopy and overlying atmosphere can be turbulently decoupled from each other, meaning that the vertical exchange of energy and matter is reduced or hampered. This complicates flux measurements performed above the canopy. Wind above the canopy will induce vertical exchange. However, stable thermal stratification, when lower parts of the canopy are colder, will hamper vertical exchange. To study the effect of thermal stratification on decoupling, we analyze highresolution (0.3 m) vertical temperature profiles measured in a Douglas fir stand in the Netherlands using distributed temperature sensing (DTS). The forest has an open understory (0'20 m) and a dense overstory (20'34 m). The understory was often colder than the atmosphere above (80 % of the time during the night, > 99 % during the day). Based on the aerodynamic Richardson number the canopy was regularly decoupled from the atmosphere (50 % of the time at night). In particular, decoupling could occur when both u∗ < 0:4 m s-1 and the canopy was able to cool down through radiative cooling. With these conditions the understory could become strongly stably stratified at night. At higher values of the friction velocity the canopy was always well mixed. While the understory was nearly always stably stratified, convection just above the forest floor was common. However, this convection was limited in its vertical extent, not rising higher than 5 m at night and 15 m during the day. This points towards the understory layer acting as a kind of mechanical "blocking layer"between the forest floor and overstory. With the DTS temperature profiles we were able to study decoupling and stratification of the canopy in more detail and study processes which otherwise might be missed. These types of measurements can aid in describing the canopy' atmosphere interact, Water Resources, Atmospheric Remote Sensing

High-resolution large-eddy simulations of the Antarctic very stable boundary layer reveal a mechanism for systematic and periodic intermittent bursting. A nonbursting state with a boundary layer height of just 3 m is alternated by a bursting state with a height of ≈5 m. The bursts result from unstable wave growth triggered by a shear-generated Kelvin–Helmholtz instability, as confirmed by linear stability analysis. The shear at the top of the boundary layer is built up by two processes. The upper, quasi-laminar layer accelerates due to the combined effect of the pressure force and rotation by the Coriolis force, while the lower layer decelerates by turbulent friction. During the burst, this shear is eroded and the initial cause of the instability is removed. Subsequently, the interfacial shear builds up again, causing the entire sequence to repeat itself with a time scale of ≈10 min. Despite the clear intermittent bursting, the overall change of the mean wind profile is remarkably small during the cycle. This enables such a fast erosion and recovery of the shear. This mechanism for cyclic bursting is remarkably similar to the mechanism hypothesized by Businger in 1973, with one key difference. Whereas Businger proposes that the flow acceleration in the upper layer results from downward turbulent transfer of high-momentum flow, the current results indicate no turbulent activity in the upper layer, hence requiring another source of momentum. Finally, it would be interesting to construct a climatology of shear-generated intermittency in relation to large-scale conditions to assess the generality of this Businger mechanism., Atmospheric Remote Sensing

An overview is given of 50-year Cabauw observations and research on the structure and dynamics of the atmospheric boundary layer. It is shown that over time this research site with its 200-m meteorological tower has grown into an atmospheric observatory with a comprehensive observational program encompassing almost all aspects of the atmospheric column including its boundary conditions. This is accomplished by the Cabauw Experimental Site for Atmospheric Research (CESAR) a consortium of research institutes. CESAR plays an important role in the educational programs of the CESAR universities. The current boundary-layer observational program is described in detail, and other parts of the CESAR observational program discussed more briefly. Due to an open data policy the CESAR datasets are used by researchers all over the world. Examples are given of the use of the long time series for model evaluation, satellite validation, and process studies. The role of tall towers is discussed in relation to the development of more and better ground-based remote sensing techniques. CESAR is now incorporated into the Ruisdael observatory, the large-scale atmospheric research infrastructure in the Netherlands. With Ruisdael the embedding of the Dutch atmospheric community in national policy landscape, and in the European atmospheric research infrastructures is assured for the coming decade., Atmospheric Remote Sensing

Near-surface wind speed is typically only measured by point observations. The actively heated fiber-optic (AHFO) technique, however, has the potential to provide high-resolution distributed observations of wind speeds, allowing for better spatial characterization of fine-scale processes. Before AHFO can be widely used, its performance needs to be tested in a range of settings. In this work, experimental results on this novel observational wind-probing technique are presented. We utilized a controlled wind tunnel setup to assess both the accuracy and the precision of AHFO under a range of operational conditions (wind speed, angles of attack and temperature difference). The technique allows for wind speed characterization with a spatial resolution of 0.3 m on a 1 s timescale. The flow in the wind tunnel was varied in a controlled manner such that the mean wind ranged between 1 and 17 m s-1. The AHFO measurements are compared to sonic anemometer measurements and show a high coefficient of determination (0.92–0.96) for all individual angles, after correcting the AHFO measurements for the angle of attack. Both the precision and accuracy of the AHFO measurements were also greater than 95 % for all conditions. We conclude that AHFO has the potential to measure wind speed, and we present a method to help choose the heating settings of AHFO. AHFO allows for the characterization of spatially varying fields of mean wind. In the future, the technique could potentially be combined with conventional distributed temperature sensing (DTS) for sensible heat flux estimation in micrometeorological and hydrological applications., Water Resources, Atmospheric Remote Sensing

Wind machines are used in the agricultural sector to prevent or mitigate the adverse effects of night frost in spring. In this study we aim to quantify the impact of wind machine operation on the local temperature field in an orchard. To this end, a field experiment is conducted and experimental analysis is combined with numerical simulation studies in order to assess the functional relations between wind machine performance and the dominating physical processes occurring during radiative frost events. Experimental observations showed that the temperature response strongly depends on the radial distance to the fan and the height above the surface. In agreement with previous studies, the wind machine was able to achieve rotation-averaged temperature increases of up to 50% of the inversion strength ( ≈ 3 K) in an area of 3–5 ha at 1 m height. Furthermore, it was observed that even weak ambient winds (<1 m/s) already may cause strong upwind-downwind asymmetries in the protected area, the downwind area being larger. The numerical model, inspired by the field experiment, showed similar spatial temperature responses as compared to observations. Interestingly, it was found that slower rotation times of the wind machine (3 to 6 min) lead to a significant increase of affected area, while the temperature enhancement itself stayed relatively constant. Variation of the horizontal tilt angle showed that, in our model, temperature enhancement was maximized between 8∘ and 16∘. This nearly horizontal flow already facilitates efficient vertical mixing of momentum and heat, presumably due to generation of shear instabilities at the lower edge of the jet. Finally, like in the observations also the numerical result showed strong upwind-downwind asymmetry in the affected area due to background wind., Atmospheric Remote Sensing, Water Resources

The overall depth of a fog layer is one of the important factors in determining the hazard that a fog event presents. With discrete observations and often coarse numerical grids, however, fog depth cannot always be accurately determined. To address this, we derive a simple analytical relation that describes the change in depth of a fog interface with time, which depends on the tendencies and vertical gradients of moisture. We also present a lengthscale estimate for the maximum depth over which mixing can occur in order for the fog layer to be sustained, assuming a uniform mixing of the vertical profiles of temperature and moisture. Even over several hours, and when coarse observational resolution is used, the analytical description is shown to accurately diagnose the depth of a fog layer when compared against observational data and the results of large-eddy simulations. Such an analytical description not only enables the estimation of sub-grid or inter-observation fog depth, but also provides a simple framework for interpreting the evolution of a fog layer in time., Atmospheric Remote Sensing

We study the coupled action of water uptake and root development of maize in potting soil under greenhouse conditions. To this end, we apply subsurface irrigation strategies that are constant over weeks. We perform synchronous realtime measurements of the co-evolving soil moisture fields and root distributions. Will constant irrigation regimes eventually lead to constant root distributions and soil moisture profiles? In this contribution we report on the preliminary results of a study on the soil-root system behavior and underlying feedback loops. Understanding of the feedback loops between the soil moisture distribution and root development opens new pathways for boosting natural adaptation and climate resilience of plants. We compare two soil-root-systems that differ in irrigation depth; one with a constant irrigation depth and one with a step wise increasing irrigation depth. We also compare a bare soil system without roots., Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public., Water Resources, Atmospheric Remote Sensing

This poster will be presented at EMS 2019 in Copenhagen. Fog - in particular, the associated reduction is visibility - presents a hazard to airport operations. Although tech- nology has improved to allow greater safety during fog events, protocol still requires more time between aircraft movements, often resulting in significant delays and cancellations. Yet, observations at Amsterdam’s Schiphol International Airport in the Netherlands (one of Europe’s busiest airports) suggest that the airport buildings and aircraft operations themselves may help to alleviate some of the fog hazard. Meteorological data from from a network of weather stations at and around Schiphol airport are used to assess the occurrence and severity of fog events. Runways located closer to airport terminals are shown to experience both fewer and shorter fog events than those at greater distances from the main terminal complex. Further, large aircraft - in particular Boeing 747s - are observed to raise local runway temperature and wind speed by as much as a few degrees under nocturnal stable boundary layer conditions, which can have a significant impact on the formation of local fog. These find- ings present an interesting look at the local influence of airport construction and aircraft operations, suggesting that they may ultimately lead to "built-in" fog mitigation beyond the natural, undisturbed state. The benefit likely grows with the size of the airport. The larger and busier the airport (such as Heathrow, or Paris-Charles de Gaulle), for example, the more damaging a fog event can be, but the greater potential for disruption of fog formation due to greater number of aircraft movements., Atmospheric Remote Sensing

We present a conceptual model for the diurnal cycle of the dry atmospheric boundary layer (ABL). It may serve as a framework for future numerical studies on the transitional dynamics that characterize the ABL over land. The conceptual model enables us to define expressions for relevant physical scales as a function of the most prominent forcing parameters and the low degree of complexity facilitates a dimensionless description. This is useful to help generalize boundary layer dynamics that occur on a diurnal time scale. Further, the model’s application for numerical studies is illustrated herein with two examples: a single-column-model study that assesses the effect of wind forcing on the main characteristics of the diurnal cycle, and a large-eddy-simulation study on the daily evolution of turbulence under weak-wind-forcing conditions. The results from these studies sketch the general evolution of the present set of diurnal-cycle systems in more detail. We discuss how the setups are able to reproduce well-known dynamical features of the ABL and also highlight limitations, where the simple conceptual system is unable to describe realistic ABL behavior. We conclude that the present conceptual model has an interesting balance between model-system complexity and physical realism, such that it is useful for future idealized studies on the diurnal cycle of the ABL., Atmospheric Remote Sensing

The Netherlands is characterized by highly variable land use within a small area, and a strong influence of the North Sea on national climate. Devoid of significant topography, it is an excellent location for assessing the relative influence of various factors on fog occurrence in the absence of terrain effects. Using observations from a dense network of weather stations throughout the country, the climatology of fog in the Netherlands is assessed over a period of 45 years. On a national scale, interannual variability is linked to changes in synoptic pressure-gradient forcing. Within the country, a comprehensive in-depth analysis of regional differences between fog occurrence is made, together with an assessment of local physical factors which could bias fog formation in one location over another. Regional variability is shown to be strongly related to the mesoscale influences of urbanization and the North Sea. In fact, some locations experience over twice as much fog as others. From this finding, a simple index is presented, which combines the water and urban fraction surrounding a station. This “Regionally Weighted Index” (RWI) is able to accurately sort the stations according to their relative fogginess. Its practical use is encouraged for assessing a given site's climatological favourability, even when in situ meteorological observations are unavailable., Atmospheric Remote Sensing

Conventional in situ observations of visibility and other meteorological variables are restricted to a limited number of heights near the surface, with the lowest observation often made above 1 m. This can result in missed observations of shallow fog as well as the initial growth stage of thicker fog layers. At the same time, numerical experiments have demonstrated the need for high vertical grid resolution in the near-surface layer to accurately simulate the onset of fog; this requires correspondingly high-resolution observational data for validation. In November 2017, a field experiment was conducted at the Cabauw Experimental Site for Atmospheric Research (CESAR) in the Netherlands with the aim of observing the growth of shallow fog from the ground up, assessing the applicability of emerging high-resolution methods for observing shallow fog. Two innovative, high-resolution techniques were employed: distributed temperature sensing (DTS), providing temperature and relative humidity observations at vertical resolutions as fine as 1 cm, and a novel camera-LED method to observe near-surface visibility below the conventional sensor height of 2.0 m. These observations were supplemented by the existing observations at the site, including those along a 200-m tall tower. Comparison between the high-resolution observations and their conventional counterparts shows the errors to be small, giving confidence to the reliability of the techniques. The high resolution of the observations subse- quently allows for detailed investigations of near surface processes. The growth of fog layers from the ground up was observed with very strong temperature inversions in the lowest metre (up to 5 K), and corresponding region of (super)saturation where the fog formed and grew. Throughout the two-week observation period, fog was observed twice at the conventional sensor height of 2.0 m, but up to four times in the lowest 0-0.5 m using the camera estimates, with the shallow fog also forming u, Atmospheric Remote Sensing, Water Resources

Conventional in situ observations of meteorological variables are restricted to a limited number of levels near the surface, with the lowest observation often made around 1-m height. This can result in missed observations of both shallow fog, and the initial growth stage of thicker fog layers. At the same time, numerical experiments have demonstrated the need for high vertical grid resolution in the near-surface layer to accurately simulate the onset of fog; this requires correspondingly high-resolution observational data for validation. A two-week field campaign was conducted in November 2017 at the Cabauw Experimental Site for Atmospheric Research (CESAR) in the Netherlands. The aim was to observe the growth of shallow fog layers and assess the possibility of obtaining very high-resolution observations near the surface during fog events. Temperature and relative humidity were measured at centimetre resolution in the lowest 7 m using distributed temperature sensing. Further, a novel approach was employed to estimate visibility in the lowest 2.5 m using a camera and an extended light source. These observations were supplemented by the existing conventional sensors at the site, including those along a 200-m tall tower. Comparison between the increased-resolution observations and their conventional counterparts show the errors to be small, giving confidence in the reliability of the techniques. The increased resolution of the observations subsequently allows for detailed investigations of fog growth and evolution. This includes the observation of large temperature inversions in the lowest metre (up to 5 K) and corresponding regions of (super)saturation where the fog formed. Throughout the two-week observation period, fog was observed twice at the conventional sensor height of 2.0 m. Two additional low-visibility events were observed in the lowest 0–0.5 m using the camera-based observations, but were missed by the conventional sensors. The camera observations also show, Atmospheric Remote Sensing, Water Resources

Observations of two typical contrasting weakly stable and very stable boundary layers from the winter at Dome C station, Antarctica, are used as a benchmark for two centimetre-scale-resolution large-eddy simulations. By taking the Antarctic winter, the effects of the diurnal cycle are eliminated, enabling the study of the long-lived steady stable boundary layer. With its homogeneous, flat snow surface, and extreme stabilities, the location is a natural laboratory for studies on the long-lived stable boundary layer. The two simulations differ only in the imposed geostrophic wind speed, which is identified as the main deciding factor for the resulting regime. In general, a good correspondence is found between the observed and simulated profiles of mean wind speed and temperature. Discrepancies in the temperature profiles are likely due to the exclusion of radiative transfer in the current simulations. The extreme stabilities result in a considerable contrast between the stable boundary layer at the Dome C site and that found at typical mid-latitudes. The boundary-layer height is found to range from approximately 50m to just 5m in the most extreme case. Remarkably, heating of the boundary layer by subsidence may result in thermal equilibrium of the boundary layer in which the associated heating is balanced by the turbulent cooling towards the surface. Using centimetre-scale resolutions, accurate large-eddy simulations of the extreme stabilities encountered in Antarctica appear to be possible. However, future simulations should aim to include radiative transfer and sub-surface heat transport to increase the degree of realism of these types of simulations., Atmospheric Remote Sensing

In this work we study the dynamics of the surface-based temperature inversion over the Antarctic Plateau during the polar winter. Using 6 years of observations from the French–Italian Antarctic station Concordia at Dome C, we investigate sudden regime transitions in the strength of the near-surface temperature inversion. Here we define “near-surface” as being within the domain of the 45-m measuring tower. In particular, we consider the strongly nonlinear relation between the 10-m inversion strength (T 10m – T s ) and the 10-m wind speed. To this end, all individual events for which the 10-m inversion strength increases or decreases continuously by more than 15 K in time are considered. Composite time series and vertical profiles of wind and temperature reveal specific characteristics of the transition from weak to very strong inversions and vice versa. In contrast to midlatitudes, the largest variations in temperature are not found at the surface but at a height of 10 m. A similar analysis was performed on results from an atmospheric single-column model (SCM). Overall, the SCM results reproduce the observed characteristics of the transitions in the near-surface inversion remarkably well. Using model output, the underlying mechanisms of the regime transitions are identified. The nonlinear relation between inversion strength and wind speed at a given level is explained by variations in the geostrophic wind speed, changes in the depth of the turbulent layer and the vertical divergence of turbulent fluxes. Moreover, the transitions between different boundary layer regimes cannot be explained without considering the contribution of subsidence heating., Atmospheric Remote Sensing, Atmospheric Physics

The reduction in visibility that accompanies fog events presents a hazard to human safety and navigation. However, accurate fog prediction remains elusive, with numerical methods often unable to capture the conditions of fog formation, and observational methods having high false-alarm rates in order to obtain high hit rates of prediction. In this work, 5 years of observations from the Cabauw Experimental Site for Atmospheric Research are used to further investigate how false alarms may be reduced using the statistical method for diagnosing radiation-fog events from observations developed by Menut et al. (Boundary-Layer Meteorol 150:277–297, 2014). The method is assessed for forecast lead times of 1–6 h and implementing four optimization schemes to tune the prediction for different needs, compromising between confidence and risk. Prediction scores improve significantly with decreased lead time, with the possibility of achieving a hit rate of over 90% and a false-alarm rate of just 13%. In total, a further 31 combinations of predictive variables beyond the original combination are explored (including mostly, e.g., variables related to moisture and static stability of the boundary layer). Little change to the prediction scores indicates any appropriate combination of variables that measure saturation, turbulence, and near-surface cooling can be used. The remaining false-alarm periods are manually assessed, identifying the lack of spatio–temporal information (such as the temporal evolution of the local conditions and the advective history of the airmass) as the ultimate limiting factor in the methodology’s predictive capabilities. Future observational studies are recommended that investigate the near-surface evolution of fog and the role of non-local heterogeneity on fog formation., Atmospheric Remote Sensing

We perform direct numerical simulation of the Couette flow as a model for the stable boundary layer. The flow evolution is investigated for combinations of the (bulk) Reynolds number and the imposed surface buoyancy flux. First, we establish what the similarities and differences are between applying a fixed buoyancy difference (Dirichlet) and a fixed buoyancy flux (Neumann) as boundary conditions. Moreover, two distinct parameters were recently proposed for the turbulent-to-laminar transition: the Reynolds number based on the Obukhov length and the "shear capacity," a velocity-scale ratio based on the buoyancy flux maximum. We study how these parameters relate to each other and to the atmospheric boundary layer. The results show that in a weakly stratified equilibrium state, the flow statistics are virtually the same between the different types of boundary conditions. However, at stronger stratification and, more generally, in nonequilibrium conditions, the flow statistics do depend on the type of boundary condition imposed. In the case of Neumann boundary conditions, a clear sensitivity to the initial stratification strength is observed because of the existence of multiple equilibriums, while for Dirichlet boundary conditions, only one statistically steady turbulent equilibrium exists for a particular set of boundary conditions. As in previous studies, we find that when the imposed surface flux is larger than the maximum buoyancy flux, no turbulent steady state occurs. Analytical investigation and simulation data indicate that this maximum buoyancy flux converges for increasing Reynolds numbers, which suggests a possible extrapolation to the atmospheric case., Atmospheric Remote Sensing

It is well known that the representation of certain atmospheric conditions in climate and weather models can still suffer from the limited grid resolution that is facilitated by modern-day computer systems. Herein we study a simple one-dimensional analogy to those models by using a single-column model description of the atmosphere. The model employs an adaptive Cartesian mesh that applies a high-resolution mesh only when and where it is required. The so-called adaptive-grid model is described, and we report our findings obtained for tests to evaluate the representation of the atmospheric boundary layer, based on the first two GEWEX ABL Study (GABLS) inter-comparison cases. The analysis shows that the adaptive-grid algorithm is indeed able to dynamically coarsen and refine the numerical grid whilst maintaining an accurate solution. This is an interesting result as in reality, transitional dynamics (e.g. due to the diurnal cycle or due to changing synoptic conditions) are the rule rather than the exception., Atmospheric Remote Sensing

We present a proof-of-concept for the adaptive mesh refinement method applied to atmospheric boundary-layer simulations. Such a method may form an attractive alternative to static grids for studies on atmospheric flows that have a high degree of scale separation in space and/or time. Examples include the diurnal cycle and a convective boundary layer capped by a strong inversion. For such cases, large-eddy simulations using regular grids often have to rely on a subgrid-scale closure for the most challenging regions in the spatial and/or temporal domain. Here we analyze a flow configuration that describes the growth and subsequent decay of a convective boundary layer using direct numerical simulation (DNS). We validate the obtained results and benchmark the performance of the adaptive solver against two runs using fixed regular grids. It appears that the adaptive-mesh algorithm is able to coarsen and refine the grid dynamically whilst maintaining an accurate solution. In particular, during the initial growth of the convective boundary layer a high resolution is required compared to the subsequent stage of decaying turbulence. More specifically, the number of grid cells varies by two orders of magnitude over the course of the simulation. For this specific DNS case, the adaptive solver was not yet more efficient than the more traditional solver that is dedicated to these types of flows. However, the overall analysis shows that the method has a clear potential for numerical investigations of the most challenging atmospheric cases., Atmospheric Remote Sensing, Atmospheric Physics

Observations evidence extremely stable boundary layers (SBL) over the Antarctic Plateau and sharp regime transitions between weakly and very stable conditions. Representing such features is a challenge for climate models. This study assesses the modeling of the dynamics of the boundary layer over the Antarctic Plateau in the LMDZ general circulation model. It uses 1 year simulations with a stretched-grid over Dome C. The model is nudged with reanalyses outside of the Dome C region such as simulations can be directly compared to in situ observations. We underline the critical role of the downward longwave radiation for modeling the surface temperature. LMDZ reasonably represents the near-surface seasonal profiles of wind and temperature but strong temperature inversions are degraded by enhanced turbulent mixing formulations. Unlike ERA-Interim reanalyses, LMDZ reproduces two SBL regimes and the regime transition, with a sudden increase in the near-surface inversion with decreasing wind speed. The sharpness of the transition depends on the stability function used for calculating the surface drag coefficient. Moreover, using a refined vertical grid leads to a better reversed “S-shaped” relationship between the inversion and the wind. Sudden warming events associated to synoptic advections of warm and moist air are also well reproduced. Near-surface supersaturation with respect to ice is not allowed in LMDZ but the impact on the SBL structure is moderate. Finally, climate simulations with the free model show that the recommended configuration leads to stronger inversions and winds over the ice-sheet. However, the near-surface wind remains underestimated over the slopes of East-Antarctica., Atmospheric Remote Sensing

Geostrophic wind speed data, derived from pressure observations, are used in combination with tower measurements to investigate the nocturnal stable boundary layer at Cabauw, the Netherlands. Since the geostrophic wind speed is not directly influenced by local nocturnal stability, it may be regarded as an external forcing parameter of the nocturnal stable boundary layer. This is in contrast to local parameters such as in situ wind speed, the Monin-Obukhov stability parameter (z/L), or the local Richardson number. To characterize the stable boundary layer, ensemble averages of clear-sky nights with similar geostrophic wind speeds are formed. In this manner, the mean dynamical behavior of near-surface turbulent characteristics and composite profiles of wind and temperature are systematically investigated. The classification is found to result in a gradual ordering of the diagnosed variables in terms of the geostrophic wind speed. In an ensemble sense the transition from the weakly stable to very stable boundary layer is more gradual than expected. Interestingly, for very weak geostrophic winds, turbulent activity is found to be negligibly small while the resulting boundary cooling stays finite. Realistic numerical simulations for those cases should therefore have a comprehensive description of other thermodynamic processes such as soil heat conduction and radiative transfer., Atmospheric Remote Sensing

Geostrophic wind speed data, derived from pressure observations, are used in combination with tower measurements to investigate the nocturnal stable boundary layer at Cabauw (The Netherlands). Since the geostrophic wind speed is not directly influenced by local nocturnal stability, it may be regarded as an external forcing parameter of the nocturnal stable boundary layer. This is in contrast to local parameters such as in situ wind speed, the Monin-Obukhov stability parameter (z/L) or the local Richardson number. To characterize the stable boundary layer, ensemble averages of clear-sky nights with similar geostrophic wind speed are formed. In this manner, the mean dynamical behavior of near-surface turbulent characteristics, and composite profiles of wind and temperature are systematically investigated. We find that the classification results in a gradual ordering of the diagnosed variables in terms of the geostrophic wind speed. In an ensemble sense the transition from the weakly stable to very stable boundary layer is more gradual than expected. Interestingly, for very weak geostrophic winds turbulent activity is found to be negligibly small while the resulting boundary cooling stays finite. Realistic numerical simulations for those cases should therefore have a comprehensive description of other thermodynamic processes such as soil heat conduction and radiative transfer.

This study aims to find the typical growth rate of the temperature inversion during the onset of the stable boundary layer around sunset. The sunset transition is a very challenging period for numerical weather prediction, since neither accepted theories for the convective boundary layer, nor those for the stable boundary layer appear to be applicable. To gain more insight in this period a systematic investigation of the temperature inversion growth rate is conducted. A statistical procedure is used to analyze almost 16 years of observations from the Cabauw observational tower, supported by observations from two additional sites (Dome C and Karlsruhe). The results show that, on average, the growth rate of the temperature inversion (normalized by the maximum inversion during the night) weakly declines with increasing wind speed. The observed growth rate is quantitatively consistent among the sites, and it appears insensitive to various other parameters. The results were also insensitive to the afternoon decay rate of the net radiation except when this decay rate was very weak. These observations are compared to numerical solutions of three models with increasing complexity: a bulk-model, an idealized single-column model (SCM) and an operational-level SCM. It appears only the latter could reproduce qualitative features of the observations using a first-order closure. Moreover, replacing this closure with a prognostic TKE-scheme substantially improved the quantitative performance. This suggests that idealized models assuming instantaneous equilibrium flux-profile relations may not aid in understanding this period, since history effects may qualitatively affect the dynamics.

The evening transition is investigated in an idealized model for the nocturnal boundary layer. From earlier studies it is known that the nocturnal boundary layer may manifest itself in two distinct regimes, depending on the ambient synoptic conditions: strong-wind or overcast conditions typically lead to weakly stable, turbulent nights; clear-sky and weak-wind conditions, on the other hand, lead to very stable, weakly turbulent conditions. Previously, the dynamical behaviour near the transition between these regimes was investigated in an idealized setting, relying on Monin–Obukhov (MO) similarity to describe turbulent transport. Here, we investigate a similar set-up, using direct numerical simulation; in contrast to MO-based models, this type of simulation does not need to rely on turbulence closure assumptions. We show that previous predictions are verified, but now independent of turbulence parametrizations. Also, it appears that a regime shift to the very stable state is signaled in advance by specific changes in the dynamics of the turbulent boundary layer. Here, we show how these changes may be used to infer a quantitative estimate of the transition point from the weakly stable boundary layer to the very stable boundary layer. In addition, it is shown that the idealized, nocturnal boundary-layer system shares important similarities with generic non-linear dynamical systems that exhibit critical transitions. Therefore, the presence of other, generic early warning signals is tested as well. Indeed, indications are found that such signals are present in stably stratified turbulent flows.

The evening transition is investigated in an idealized model for the nocturnal boundary layer. From earlier studies it is known that the nocturnal boundary layer may manifest itself in two distinct regimes, depending on the ambient synoptic conditions: strong-wind or overcast conditions typically lead to weakly stable, turbulent nights; clear-sky and weak-wind conditions, on the other hand, lead to very stable, weakly turbulent conditions. Previously, the dynamical behaviour near the transition between these regimes was investigated in an idealized setting, relying on Monin–Obukhov (MO) similarity to describe turbulent transport. Here, we investigate a similar set-up, using direct numerical simulation; in contrast to MO-based models, this type of simulation does not need to rely on turbulence closure assumptions. We show that previous predictions are verified, but now independent of turbulence parametrizations. Also, it appears that a regime shift to the very stable state is signaled in advance by specific changes in the dynamics of the turbulent boundary layer. Here, we show how these changes may be used to infer a quantitative estimate of the transition point from the weakly stable boundary layer to the very stable boundary layer. In addition, it is shown that the idealized, nocturnal boundary-layer system shares important similarities with generic non-linear dynamical systems that exhibit critical transitions. Therefore, the presence of other, generic early warning signals is tested as well. Indeed, indications are found that such signals are present in stably stratified turbulent flows., Atmospheric Remote Sensing

The performance of an atmospheric single-column model (SCM) is studied systematically for stably-stratified conditions. To this end, 11 years (2005–2015) of daily SCM simulations were compared to observations from the Cabauw observatory, The Netherlands. Each individual clear-sky night was classified in terms of the ambient geostrophic wind speed with a (Formula presented.) bin-width. Nights with overcast conditions were filtered out by selecting only those nights with an average net radiation of less than (Formula presented.). A similar procedure was applied to the observational dataset. A comparison of observed and modelled ensemble-averaged profiles of wind speed and potential temperature and time series of turbulent fluxes showed that the model represents the dynamics of the nocturnal boundary layer (NBL) at Cabauw very well for a broad range of mechanical forcing conditions. No obvious difference in model performance was found between near-neutral and strongly-stratified conditions. Furthermore, observed NBL regime transitions are represented in a natural way. The reference model version performs much better than a model version that applies excessive vertical mixing as is done in several (global) operational models. Model sensitivity runs showed that for weak-wind conditions the inversion strength depends much more on details of the land-atmosphere coupling than on the turbulent mixing. The presented results indicate that in principle the physical parametrizations of large-scale atmospheric models are sufficiently equipped for modelling stably-stratified conditions for a wide range of forcing conditions., Geoscience and Remote Sensing

This study aims to find the typical growth rate of the temperature inversion during the onset of the stable boundary layer around sunset.The sunset transition is a very challenging period for numerical weather prediction, since neither accepted theories for the convective boundary layer nor those for the stable boundary layer appear to be applicable. To gainmore insight in this period, a systematic investigation of the temperature inversion growth rate is conducted. A statistical procedure is used to analyze almost 16 years of observations from the Cabauw observational tower, supported by observations from two additional sites (DomeCandKarlsruhe). The results show that, on average, the growth rate of the temperature inversion (normalized by the maximum inversion during the night) weakly declines with increasing wind speed. The observed growth rate is quantitatively consistent among the sites, and it appears insensitive to various other parameters. The results were also insensitive to the afternoon decay rate of the net radiation except when this decay rate was very weak. These observations are compared to numerical solutions of three models with increasing complexity: a bulk model, an idealized single-column model (SCM), and an operational-level SCM. It appears only the latter could reproduce qualitative features of the observations using a first-order closure. Moreover, replacing this closure with a prognostic TKE scheme substantially improved the quantitative performance. This suggests that idealized models assuming instantaneous equilibrium flux-profile relations may not aid in understanding this period, since history effects may qualitatively affect the dynamics., Atmospheric Remote Sensing