Search

Wireless power transfer (WPT) has garnered increasing attention due to its potential to eliminate device-side batteries. With the advent of (distributed) multiple-input multiple-output (MIMO), radio frequency (RF) WPT has become feasible over extended distances. This study focuses on optimizing the energy delivery to Energy Receivers (ERs) while minimizing system total transmit power. Rather than continuous power delivery, we optimize the precoding weights within specified time slots to meet the energy requirements of the ERs. Both unsynchronized (non-coherent) and synchronized (coherent) systems are evaluated. Our analysis indicates that augmenting the number of antennas and transitioning from an unsynchronized to asynchronized full phase-coherent system substantially enhances system performance. This optimization ensures precise energy delivery, reducing overshoots and overall energy consumption. Experimental validation was conducted using a testbed with84 antennas, validating the trends observed in our numerical simulations., Comment: 2024 IEEE 25th International Workshop on Signal Processing Advances in Wireless Communications (SPAWC)

Internet of Things (IoT) technology is named as a key ingredient in the evolution towards digitization of many applications and services. A deployment based on battery-powered remote Internet of Things (IoT) devices enables easy installation and operation, yet the autonomy of these devices poses a crucial challenge. A too short lifespan is undesirable from a functional, economical, and ecological point of view. This paper presents a unmanned aerial vehicle (UAV)-based approach to recharge remote Internet of Things (IoT) nodes. An in-depth study of the charging efficiency and optimization of key parameters, and measurements-based verification, is reported on. An actual corresponding design and implementation of the full UAV-based charging system and its proof-of-concept validation are presented. Finally, the sustainability of the proposed solution is discussed. The results presented in this paper hence confirm that the proposed UAV-based approach and design are functionally successful and efficient charging can be achieved, provided the constraints and challenges coming with the approach are adequately dealt with. Moreover, it comes with an overall reduction in ecological footprint for IoT applications relying on battery-powered nodes in need of medium energy and/or considerable lifetime expectation (5 years or more).

Keeping the batteries on the shelf: this is the holy grail for low-cost Internet of Things (IoT) nodes. In this paper we study the potential of radio frequency (RF)-based wireless power transfer implementing coherent beamforming with many antennas to realize this ambitious target. We optimize the deployment of the antennas to charge electronic shelf labels (ESLs), considering actual regulatory constraints. The results confirm the feasibility to create power spots that are sufficient to keep the high density of battery-less devices operational.

Besides wide attraction in the industry, IoT is being used to advance STEM and STEAM education across a range of education levels. This work presents a remote sensing platform, named IoT with a Soft Touch, developed to achieve two goals. First, it aims to lower the technicality, stimulating the students to do STE(A)M. Second, the technology is to be used in `softer' applications (e.g., environmental and health care), thereby aiming to attract a more diverse set of student profiles. Students can easily build a wireless sensing device, with a specific application in mind. The modular design of the platform and an intuitive graphical configurator tool allows them to tailor the device's functionality to their needs. The sensor's data is transmitted wirelessly with LoRaWAN. The data can be viewed and analyzed on a dashboard, or the raw data can be extracted for further processing, e.g., as part of the school's STE(A)M curriculum. This work elaborates on the low-power and modular design challenges, and how the platform is used in education.

New concepts for next-generation wireless systems are being developed. It is expected that these 6G and beyond systems will incorporate more than only communication, but also sensing, positioning, (deep) edge computing, and other services. The discussed measurement facility and approach, named Techtile, is an open, both in design and operation, and unique testbed to evaluate these newly envisioned systems. Techtile is a multi-functional and versatile testbed, providing fine-grained distributed resources for new communication, positioning and sensing technologies. The facility enables experimental research on hyper-connected interactive environments and validation of new algorithms and topologies. The backbone connects 140~resource units equipped with edge computing devices, software-defined radios, sensors, and LED sources. By doing so, different network topologies and local-versus-central computing can be assessed. The introduced diversity of i) the technologies (e.g., RF, acoustics and light), ii) the distributed resources and iii) the interconnectivity allows exploring more degrees and new types of diversity, which can be investigated in this testbed., Comment: arXiv admin note: substantial text overlap with arXiv:2105.06740

Autonomy of devices is a major challenge in many Internet of Things (IoT) applications, in particular when the nodes are deployed remotely or difficult to assess places. In this paper we present an approach to provide energy to these devices by Unmanned Aerial Vehicles (UAVs). Therefore, the two major challenges, finding and charging the node are presented. We propose a model to give the energy constrained node an unlimited autonomy by taken the Wireless Power Transfer (WPT) link and battery capacity into account. Selecting the most suitable battery technology allows a reduction in battery capacity and waste. Moreover, an upgrade of existing IoT nodes is feasible with a limited impact on the design and form factor.

The Techtile measurement infrastructure is a multi-functional, versatile testbed for new communication and sensing technologies relying on fine-grained distributed resources. The facility enables experimental research on hyper-connected interactive environments and validation of new wireless connectivity, sensing and positioning solutions. It consists of a data acquisition and processing equipment backbone and a fabric of dispersed edge computing devices, Software-Defined Radios, sensors, and LED sources. These bring intelligence close to the applications and can also collectively function as a massive, distributed resource. Furthermore, the infrastructure allows exploring more degrees and new types of diversity, i.e., scaling up the number of elements, introducing `3D directional diversity' by deploying the distributed elements with different orientations, and `interface diversity' by exploiting multiple technologies and hybrid signals (RF, acoustic, and visible light)., Comment: has been accepted at the 41stWIC Symposium On Information Theory and Signal Processing in the Benelux (SITB 2021)