Search

The current response of a hot magnetized plasma to a radio-frequency wave is non-local, turning the electromagnetic wave equation into an integro-differential equation. Non-local physics gives rise to wave physics and absorption processes not observed in local media. Furthermore, non-local physics alters wave propagation and absorption properties of the plasma. In this work, an iterative method that accounts for parallel non-local effects in 2D axisymmetric tokamak plasmas is developed, implemented, and verified. The iterative method is based on the finite element method and Fourier decomposition, with the advantage that this numerical scheme can describe non-local effects while using a high-fidelity antenna and wall representation, as well as limiting memory usage. The proposed method is implemented in the existing full wave solver FEMIC and applied to a minority heating scenario in ITER to quantify how parallel non-local physics affect wave propagation and dissipation in the ion cyclotron range of frequencies (ICRF). The effects are then compared to a reduced local plane wave model, both verifying the physics implemented in the model, as well as estimating how well a local plane wave approximation performs in scenarios with high single pass damping. Finally, the new version of FEMIC is benchmarked against the ICRF code TORIC., QC 20240502

Modelling the propagation and dissipation of RF waves in the ion cyclotron range of frequencies is challenging due to the presence of spatial dispersion. In this work, we are presenting an iterative scheme that includes dispersive effects in all tensor elements in 2D axisymmetry. The proposed method is implemented in the existing full wave solver FEMIC and applied to two fast wave heating scenarios, one with an ITER-like plasma and the other with an AUG-like plasma, in order to evaluate the importance of parallel dispersion in the two different cases. It was found that parallel dispersion is of marginal importance in ITER when using dipole phasing, but has larger impact on the power deposition profiles in AUG, due to up-down asymmetric heating. Furthermore, it is shown that the described iterative method can account for mode conversion to the ion cyclotron wave., QC 20231124

This article proposes an approach to the novel Throguel Online (2020), by Chilean writer Nicolás Meneses, from an intermedial perspective. We will analyze the book´s place between literature, videogame, and internet, considering various elements in the mixture of real and virtual layers it is performing, and which is turning it into a symptomatic and exemplary work for the digital and cybercapitalist era. On the one hand, the novel displays, on an aesthetic, material y thematic level, different textualities and configurations of videogames that invade and transform the materialities and languages of the text. On the other hand, it shows both the difficulties of precarious life in Latin America (Chile), and the possibilities of creating new virtual communities through digital networks., El artículo propone abordar la novela Throguel Online (2020) del escritor chileno Nicolás Meneses desde una perspectiva intermedial. Analizaremos el lugar del libro entre literatura, videojuego e internet, considerando varios elementos de su mezcla entre capas reales y virtuales que realiza, y que lo convierten en una obra sintomática y modélica de la era digital e cibercapitalista. Por un lado, la novela despliega, a nivel estético, material y temático, varias textualidades y configuraciones del videojuego que invaden y transforman las materialidades y lenguajes del texto; por otro lado, señala tanto las problemáticas de una vida precaria en América Latina (Chile), como las posibilidades de formar nuevas comunidades virtuales a través de las redes digitales.

The JET 2019-2020 scientific and technological programme exploited the results of years of concerted scientific and engineering work, including the ITER-like wall (ILW: Be wall and W divertor) installed in 2010, improved diagnostic capabilities now fully available, a major neutral beam injection upgrade providing record power in 2019-2020, and tested the technical and procedural preparation for safe operation with tritium. Research along three complementary axes yielded a wealth of new results. Firstly, the JET plasma programme delivered scenarios suitable for high fusion power and alpha particle (alpha) physics in the coming D-T campaign (DTE2), with record sustained neutron rates, as well as plasmas for clarifying the impact of isotope mass on plasma core, edge and plasma-wall interactions, and for ITER pre-fusion power operation. The efficacy of the newly installed shattered pellet injector for mitigating disruption forces and runaway electrons was demonstrated. Secondly, research on the consequences of long-term exposure to JET-ILW plasma was completed, with emphasis on wall damage and fuel retention, and with analyses of wall materials and dust particles that will help validate assumptions and codes for design and operation of ITER and DEMO. Thirdly, the nuclear technology programme aiming to deliver maximum technological return from operations in D, T and D-T benefited from the highest D-D neutron yield in years, securing results for validating radiation transport and activation codes, and nuclear data for ITER., QC 20230920

In this work, we use reduced and perturbative models to examine the stability of toroidal Alfven eigenmodes (TAEs) during the internal transport barrier (ITB) afterglow in JET experiments designed for the observation of alpha driven TAEs. We demonstrate that in JET-like conditions, it is sufficient to use an incompressible cold plasma model for the TAE to reproduce the experimental adiabatic features such as frequency and position. When ion cyclotron resonant heating (ICRH) is used to destabilize TAEs, the core-localised modes that are predicted to be most strongly driven by minority ICRH fast ions correspond to the modes observed in the DD experiments, and conversely, modes that are predicted to not be driven are not observed. Linear damping rates due to a variety of mechanisms acting during the afterglow are calculated, with important contributions coming from the neutral beam and radiative damping. For DT equivalent extrapolations of discharges without ICRH heating, we find that for the majority of modes, alpha drive is not sufficient to overcome radiative damping., QC 20220902

Modeling the propagation and damping of electromagnetic waves in a hot magnetized plasma is difficult due to spatial dispersion. In such media, the dielectric response becomes non-local and the wave equation an integro-differential equation. In the application of RF heating and current drive in tokamak plasmas, the finite Larmor radius (FLR) causes spatial dispersion, which gives rise to physical phenomena such as higher harmonic ion cyclotron damping and mode conversion to electrostatic waves. In this paper, a new numerical method based on an iterative wavelet finite element scheme is presented, which is suitable for adding non-local effects to the wave equation by iterations. To verify the method, we apply it to a case of one-dimensional fast wave heating at the second harmonic ion cyclotron resonance, and study mode conversion to ion Bernstein waves (IBW) in a toroidal plasma. Comparison with a local (truncated FLR) model showed good agreement in general. The observed difference is in the damping of the IBW, where the proposed method predicts stronger damping on the IBW., QC 20200421

The present article interrogates the discourses of identities in resistance to the industrialization process in the Chiloé archipelago, focusing on the valuations of the social mobilizations of Mayo Chilote. Through a qualitative and exploratory research methodology, a content analysis was performed, in which the discursive particularities were identified to generate an analysis that characterized the discourses in a deep and comprehensive manner. The valuations of the social movement are analyzed considering it as the image of a discursive grammar from active subjects of said movement and the projection potential of those resistance identities as a possible local society project. The article concludes that, there are clear tensions in local identities, focusing the results on the particularities of the identities of resistance that limit their possibilities of projection due to a self-recognition that has not yet been consolidated., O presente artigo questiona os discursos de identidades de resistência ao processo de indus-trialização com o arquipélago de Chiloé, concentrando-se nas valorações das mobilizações sociais do Mayo Chilote. Através de uma metodologia de pesquisa qualitativa e exploratória, se realizou uma análise de conteúdo na qual se identificaram as particularidades discursivas para gerar uma análise que caracterizara os discursos de forma profunda e compreensiva. Se analisam as valorações do movimento social considerando-o como a imagem de uma gramática discursiva desde sujeitos ativos de dito movimento e o potencial de projeção daquelas identidades de resistência como eventual projeto de sociedade local. Conclui-se que existem claras tensões nas distintas identidades locais, focalizando os resultados nas particularidades das identidades de resistência que limitam suas possibilidades de projeção devido a um auto reconhecimento ainda não consolidado., El presente artículo interroga los discursos de identidades de resistencia al proceso de industria-lización en el archipiélago de Chiloé, concentrándose en las valoraciones de las movilizaciones sociales del Mayo Chilote. A través de una metodología de investigación cualitativa y exploratoria, se realizó un análisis de contenido en el cual se identificaron las particularidades discursivas para generar un estudio que caracterizara los discursos de forma profunda y comprensiva. Se analizan las valoraciones del movimiento social considerándolo como la imagen de una gra-mática discursiva desde sujetos activos de dicho movimiento y el potencial de proyección de aquellas identidades de resistencia como eventual proyecto de sociedad local. Se concluye que existen claras tensiones en las distintas identidades locales, focalizando los resultados en las particularidades de las identidades de resistencia que limitan sus posibilidades de proyección debido a un autorreconocimiento aún no consolidado.

The Ion Cyclotron Resonance Heating (ICRH) antenna in WEST has been modelled with the finite element method in 3D. A detailed geometry was used along with a hot plasma model in the plasma region. The convergence of the total absorbed power and the electron power partition was studied by varying different mesh parameters. To obtain a better resolved solution and a wave field without reflections, it is estimated that 1 TB of RAM is required. The coupled power spectrum was also studied using a two-dimensional Fourier decomposition of the electromagnetic fields. © EPS 2019. All rights reserved., QC 20201106

Alfven waves are electromagnetic perturbations inherent to magnetized plasmas that can be driven unstable by a free energy associated with gradients in the energetic particles' distribution function. The energetic particles with velocities comparable to the Alfven velocity may excite Alfven instabilities via resonant wave-particle energy and momentum exchange. Burning plasmas with large population of fusion born super-Alfvenic alpha particles in magnetically confined fusion devices are prone to excite weakly-damped Alfven eigenmodes (AEs) that, if allowed to grow unabated, can cause a degradation of fusion performance and loss of energetic ions through a secular radial transport. In order to control the fast-ion distribution and associated Alfvenic activity, the fusion community is currently searching for external actuators that can control AEs and energetic ions in the harsh environment of a fusion reactor. Most promising control techniques are based on (i) variable fast-ion sources to modify gradients in the energetic particles' distribution, (ii) localized electron cyclotron resonance heating to affect the fast-ion slowing-down distribution, (iii) localized electron cyclotron current drive to modify the equilibrium magnetic helicity and thus the AE existence criteria and damping mechanisms, and (iv) externally applied 3D perturbative fields to manipulate the fast-ion distribution and thus the wave drive. Advanced simulations help to identify the key physics mechanisms underlying the observed AE mitigation and suppression and thus to develop robust control techniques towards future burning plasmas., QC 20190503

In ASDEX Upgrade, the propagation of cold pulses induced by type-I edge localized modes (ELMs) is studied using electron cyclotron emission measurements, in a dataset of plasmas with moderate triangularity. It is found that the edge safety factor or the plasma current are the main determining parameters for the inward penetration of the T-e perturbations. With increasing plasma current the ELM penetration is more shallow in spite of the stronger ELMs. Estimates of the heat pulse diffusivity show that the corresponding transport is too large to be representative of the inter-ELM phase. Ergodization of the plasma edge during ELMs is a possible explanation for the observed properties of the cold pulse propagation, which is qualitatively consistent with non-linear magneto-hydro-dynamic simulations., QC 20190315

The recently developed Monte-Carlo code ERO2.0 is applied to the modelling of limited and diverted discharges at JET with the ITER-like wall (ILW). The global beryllium (Be) erosion and deposition is simulated and compared to experimental results from passive spectroscopy. For the limiter configuration, it is demonstrated that Be self-sputtering is an important contributor (at least 35%) to the Be erosion. Taking this contribution into account, the ERO2.0 modelling confirms previous evidence that high deuterium (D) surface concentrations of up to similar to 50% atomic fraction provide a reasonable estimate of Be erosion in plasma-wetted areas. For the divertor configuration, it is shown that drifts can have a high impact on the scrape-off layer plasma flows, which in turn affect global Be transport by entrainment and lead to increased migration into the inner divertor. The modelling of the effective erosion yield for different operational phases (ohmic, L- and H-mode) agrees with experimental values within a factor of two, and confirms that the effective erosion yield decreases with increasing heating power and confinement., QC 20200316

In ITER and DEMO, various control objectives related to plasma control must be simultaneously achieved by the plasma control system (PCS), in both normal operation as well as off-normal conditions. The PCS must act on off-normal events and deviations from the target scenario, since certain sequences (chains) of events can precede disruptions. It is important that these decisions are made while maintaining a coherent prioritization between the real-time control tasks to ensure high-performance operation. In this paper, a generic architecture for task-based integrated plasma control is proposed. The architecture is characterized by the separation of state estimation, event detection, decisions and task execution among different algorithms, with standardized signal interfaces. Central to the architecture are a plasma state monitor and supervisory controller. In the plasma state monitor, discrete events in the continuous-valued plasma state arc modeled using finite state machines. This provides a high-level representation of the plasma state. The supervisory controller coordinates the execution of multiple plasma control tasks by assigning task priorities, based on the finite states of the plasma and the pulse schedule. These algorithms were implemented on the TCV digital control system and integrated with actuator resource management and existing state estimation algorithms and controllers. The plasma state monitor on TCV can track a multitude of plasma events, related to plasma current, rotating and locked neoclassical tearing modes, and position displacements. In TCV experiments on simultaneous control of plasma pressure, safety factor profile and NTMs using electron cyclotron heating (ECI I) and current drive (ECCD), the supervisory controller assigns priorities to the relevant control tasks. The tasks are then executed by feedback controllers and actuator allocation management. This work forms a significant step forward in the ongoing integration of control capabil, QC 20190212

Some figures may appear in colour only in the online journal (Figure Presented).Due to a technical error figure 11(a) was a duplicate of figure 21(a). The correct figure 11(a) is shown above., QC 20200427

Hot spots on the divertor tiles at JET result in overestimation of the tile surface temperature which causes unnecessary termination of pulses. However, the appearance of hot spots can also indicate the condition of the divertor tile surfaces. To analyse the behaviour of the hot spots in the outer divertor tiles of JET, a simple image processing algorithm is developed. The algorithm isolates areas of bright pixels in the camera image and compares them to previously identified hot spots. The activity of the hot spots is then linked to values of other signals and parameters in the same time intervals. The operation of the detection algorithm was studied in a limited pulse range with high hot spot activity on the divertor tiles 5, 6 and 7. This allowed us to optimise the values of the controlling parameters. Then, the wider applicability of the method has been demonstrated by the analysis of the hot spot behaviour in a whole experimental campaign., QC 20200407

Two ion cyclotron resonance heating (ICRH) systems are planned for ITER, each system containing 24 antennas distributed as a two by four array of poloidal triplets. The ITER antennas are designed to operate at a poloidal phase difference between the upper and lower triplet of Δθpol = -90° in the antenna currents. Since current tokamak experiments normally operate at Δθpol = 0°, experience from ICRH schemes with Δθpol °= 0 is lacking. In this paper, the effects of poloidal phasing on ICRH power absorption and coupling are studied using the novel code FEMIC, which is described here. Simulations of the ITER antenna and the JET ITER-like antenna show that increasing the poloidal phase difference increases the destructive interference of the fast magnetosonic wave near the equatorial plane. This causes a degradation of the on-axis heating performance and reduces the total coupled power to the plasma. Best on-axis heating was obtained for Δθpol = 0°, resulting in peaked profiles. By increasing the poloidal phase difference the absorption profiles tend to become less peaked or hollow on-axis. The effect is localized and occurs for °pol ° 0.1, i.e. near the magnetic axis. The total coupled power was found to be asymmetric around Δθpol = 0° due to the plasma gyrotropy, where the maximum coupled power occurs within ?33° ° Δθpol ° ?22° on ITER and JET. The exact location of the maximum depends on the width of the pedestal. The strength of the asymmetry increases with the pedestal width., QC 20191016Correction in: 10.1088/1741-4326/ab2d06 and WOS:000476824700001

The JET exploitation plan foresees D-T operations in 2020 (DTE2). With respect to the first D-T campaign in 1997 (DTE1), when JET was equipped with a carbon wall, the experiments will be conducted in presence of a beryllium-tungsten ITER-like wall and will benefit from an extended and improved set of diagnostics and higher additional heating power (32 MW neutral beam injection + 8 MW ion cyclotron resonance heating). There are several challenges presented by operations with the new wall: a general deterioration of the pedestal confinement; the risk of heavy impurity accumulation in the core, which, if not controlled, can cause the radiative collapse of the discharge; the requirement to protect the divertor from excessive heat loads, which may damage it permanently. Therefore, an intense activity of scenario development has been undertaken at JET during the last three years to overcome these difficulties and prepare the plasmas needed to demonstrate stationary high fusion performance and clear alpha particle effects. The paper describes the status and main achievements of this scenario development activity, both from an operational and plasma physics point of view., QC 20191025

Inconel-600 blocks and stainless steel covers for quartz microbalance crystals from remote corners in the JET-ILW divertor were studied with time-of-flight elastic recoil detection analysis and nuclear reaction analysis to obtain information about the areal densities and depth profiles of elements present in deposited material layers. Surface morphology and the composition of dust particles were examined with scanning electron microscopy and energy-dispersive X-ray spectroscopy. The analyzed components were present in JET during three ITER-like wall campaigns between 2010 and 2017. Deposited layers had a stratified structure, primarily made up of beryllium, carbon and oxygen with varying atomic fractions of deuterium, up to more than 20%. The range of carbon transport from the ribs of the divertor carrier was limited to a few centimeters, and carbon/deuterium co-deposition was indicated on the Inconel blocks. High atomic fractions of deuterium were also found in almost carbon-free layers on the quartz microbalance covers. Layer thicknesses up to more than 1 micrometer were indicated, but typical values were on the order of a few hundred nanometers. Chromium, iron and nickel fractions were less than or around 1% at layer surfaces while increasing close to the layer-substrate interface. The tungsten fraction depended on the proximity of the plasma strike point to the divertor corners. Particles of tungsten, molybdenum and copper with sizes less than or around 1 micrometer were found. Nitrogen, argon and neon were present after plasma edge cooling and disruption mitigation. Oxygen-18 was found on component surfaces after injection, indicating in-vessel oxidation. Compensation of elastic recoil detection data for detection efficiency and ion-induced release of deuterium during the measurement gave quantitative agreement with nuclear reaction analysis, which strengthens the validity of the results., QC 20190125

For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des. 82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D-T mixtures since 1997 and the first ever D-T plasmas with the ITER mix of plasma-facing component materials. For this purpose, a concerted physics and technology programme was launched with a view to prepare the D-T campaign (DTE2). This paper addresses the key elements developed by the JET programme directly contributing to the D-T preparation. This intense preparation includes the review of the physics basis for the D-T operational scenarios, including the fusion power predictions through first principle and integrated modelling, and the impact of isotopes in the operation and physics of D-T plasmas (thermal and particle transport, high confinement mode (H-mode) access, Be and W erosion, fuel recovery, etc). This effort also requires improving several aspects of plasma operation for DTE2, such as real time control schemes, heat load control, disruption avoidance and a mitigation system (including the installation of a new shattered pellet injector), novel ion cyclotron resonance heating schemes (such as the three-ions scheme), new diagnostics (neutron camera and spectrometer, active Alfven eigenmode antennas, neutral gauges, radiation hard imaging systems...) and the calibration of the JET neutron diagnostics at 14 MeV for accurate fusion power measurement. The active preparation of JET for the 2020 D-T campaign provides an incomparable source of information and a basis for the future D-T operation of ITER, and it is also foreseen that a large number of key physics issues will be addressed in support of burning plasmas., QC 20190926

Fast ions in fusion plasmas often leave characteristic signatures in the neutron emission from the plasma. In this paper, we show how neutron measurements can be used to study fast ions and give examples of physics results obtained on present day tokamaks. The focus is on measurements with dedicated neutron spectrometers and with compact neutron detectors used in each channel of neutron profile monitors. A measured neutron spectrum can be analyzed in several different ways, depending on the physics scenario under consideration. Gross features of a fast ion energy distribution can be studied by applying suitably chosen thresholds to the measured spectrum, thus probing ions with different energies. With this technique it is possible to study the interaction between fast ions and MHD activity, such as toroidal Alfven eigenmodes (TAEs) and sawtooth instabilities. Quantitative comparisons with modeling can be performed by a direct computation of the neutron emission expected from a given fast ion distribution. Within this framework it is also possible to determine physics parameters, such as the supra-thermal fraction of the neutron emission, by fitting model parameters to the data. A detailed, model-independent estimate of the fast ion distribution can be obtained by analyzing the data in terms of velocity space weight functions. Using this method, fast ion distributions can be resolved in both energy and pitch by combining neutron and gamma-ray measurements obtained along several different sightlines. Fast ion measurements of the type described in this paper will also be possible at ITER, provided that the spectrometers have the dynamic range required to resolve the fast ion spectral features in the presence of the dominating thermonuclear neutron emission. A dedicated high-resolution neutron spectrometer has been designed for this purpose., QC 20220701

Alfvén waves are electromagnetic perturbations inherent to magnetized plasmas that can be driven unstable by a free energy associated with gradients in the energetic particles' distribution function. The energetic particles with velocities comparable to the Alfvén velocity may excite Alfvén instabilities via resonant wave–particle energy and momentum exchange. Burning plasmas with large population of fusion born super-Alfvénic alpha particles in magnetically confined fusion devices are prone to excite weakly-damped Alfvén eigenmodes (AEs) that, if allowed to grow unabated, can cause a degradation of fusion performance and loss of energetic ions through a secular radial transport. In order to control the fast-ion distribution and associated Alfvénic activity, the fusion community is currently searching for external actuators that can control AEs and energetic ions in the harsh environment of a fusion reactor. Most promising control techniques are based on (i) variable fast-ion sources to modify gradients in the energetic particles' distribution, (ii) localized electron cyclotron resonance heating to affect the fast-ion slowing-down distribution, (iii) localized electron cyclotron current drive to modify the equilibrium magnetic helicity and thus the AE existence criteria and damping mechanisms, and (iv) externally applied 3D perturbative fields to manipulate the fast-ion distribution and thus the wave drive. Advanced simulations help to identify the key physics mechanisms underlying the observed AE mitigation and suppression and thus to develop robust control techniques towards future burning plasmas., This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 and 2019–2020 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. Support by US DOE and ITER-CN is also acknowledged. The support from the FP7 People: Marie-Curie Actions (Grant No. 321455) and the Spanish Ministry of Economy and Competitiveness (Grants No. RYC-2011-09152, No. FIS2015-69362-P) is gratefully acknowledged. The work of AVM was funded by the Russian Science Foundation, project 14-22-00193, and was partly supported by the Competitiveness Program of NRNU MEPhI., Peer Reviewed, Postprint (published version)

El cobre es un micronutriente necesario en el proceso de la fotosíntesis, esencial para la respiración de las plantas y coadyuvante de éstas en el metabolismo de carbohidratos y proteínas. El objetivo de esta investigación fue evaluar el efecto de la fertilización con cobre sobre la producción de trigo en dos suelos de diferentes texturas. El experimento se realizó en el invernadero del Área de Suelos y Ordenamiento Territorial, FCA-UNA, sede San Lorenzo, Central, en el periodo comprendido entre los meses febrero a junio del 2019. Se utilizó un diseño completamente al azar en un esquema bifactorial, donde el Factor 1 fueron dos texturas de suelo (Franco arenoso y Arcilloso) y el Factor 2 consistió en cinco dosis de cobre (0, 2,5, 5, 7,5, 10 kg ha-1 ) con cinco repeticiones. Con la dosis de cobre hasta 10 kg ha-1 se presentaron diferencias significativas en materia seca que tiende a disminuir por aumento de la dosis, en el caso del nivel de cobre en el tejido y en el suelo, a medida que se aumenta la dosis, aumenta la concentración del elemento, pero no fueron influenciados por el tipo de suelo. Al contrario de la altura que se encontró diferencia significativa en el Factor 1, donde fue superior en suelo arcilloso. En el suelo arcilloso las dosis de 0, 5 y 10 kg ha[1]1 de cobre presentan diferencias respecto a las demás dosis y en suelo franco arenoso a medida que se aumenta la dosis de cobre, aumenta la altura del cultivo. Se recomienda no aplicar dosis superiores a 5 kg ha-1 de cobre en el cultivo de trigo porque se podrían presentar efectos negativos.

The following article is a part of the research "Violencias de Género: Otra mirada a la brecha escolar" (2018) carried out by Semilla Foundation, and aims to delve into the notion of Socio-Cultural Representations of Gender, -defined as the ideals, valuations and imaginaries surrounding gender roles- within young secondary school students in the metropolitan region of Chile. The article offers a contextualization regarding the gender approach and its relation with school violence, offering theoretical references supporting the proposed concept, as well as an analysis of how socio-cultural representations behave in the sample, and an index of representations proposed as an analysis tool. The article concludes that the majority of the secondary school youth individuals are attached to inclusive representations of gender questioning stereotyped gender roles., O artigo a seguir faz parte da pesquisa “Violencias de Género: Otra mirada a la brecha escolar” (2018), realizada pela Fundação Semilla, e tem como objetivo aprofundar na noção de Representações Socioculturais de Gênero, - entendidas como os ideários, valorações e imaginários que envolvem os papéis de gênero - dentro dos jovens estudantes do ensino médio da região metropolitana do Chile. É oferecida uma contextualização sobre a abordagem de gênero e sua relação com as violências nos espaços escolares; são também entregues referências teóricas que sustentam o conceito proposto; é analisado o comportamento das representações socioculturais na amostra e é proposto um índice de representações como uma ferramenta de análise. O artigo conclui que a maioria dos e das jovens secundários têm representações inclusivas que questionam os papéis estereotipados de gênero., El siguiente artículo se enmarca dentro de la investigación «Violencias de género: otra mirada a la brecha escolar» (2018), llevada a cabo por Fundación Semilla, y tiene por objetivo ahondar en la noción de representaciones socioculturales de género — entendidas como los idearios, valoraciones e imaginarios que circundan a los roles de género— al interior de jóvenes estudiantes secundarios de la Región Metropolitana de Chile. Se ofrece una contextualización respecto al enfoque de género y su relación con las violencias en espacios escolares; se entregan referencias teóricas que sustentan el concepto propuesto; se analiza el comportamiento de las representaciones socioculturales al interior de la muestra y se propone un índice de representaciones como herramienta de análisis. El artículo concluye que la mayor parte de los/as jóvenes secundarios poseen representaciones inclusivas que cuestionan los roles estereotipados de género.

Dedicated studies performed for toroidal Alfven eigenmodes (TAEs) in ASDEX-Upgrade (AUG) discharges with monotonic q-profiles have shown that electron cyclotron resonance heating (ECRH) can make TAEs more unstable. In these AUG discharges, energetic ions driving TAEs were obtained by ion cyclotron resonance heating (ICRH). It was found that off-axis ECRH facilitated TAE instability, with TAEs appearing and disappearing on timescales of a few milliseconds when the ECRH power was switched on and off. On-axis ECRH had a much weaker effect on TAEs, and in AUG discharges performed with co- and counter-current electron cyclotron current drive (ECCD), the effects of ECCD were found to be similar to those of ECRH. Fast ion distributions produced by ICRH were computed with the PION and SELFO codes. A significant increase in T-e caused by ECRH applied off-axis is found to increase the fast ion slowing-down time and fast ion pressure causing a significant increase in the TAE drive by ICRH-accelerated ions. TAE stability calculations show that the rise in T-e causes also an increase in TAE radiative damping and thermal ion Landau damping, but to a lesser extent than the fast ion drive. As a result of the competition between larger drive and damping effects caused by ECRH, TAEs become more unstable. It is concluded, that although ECRH effects on AE stability in present-day experiments may be quite significant, they are determined by the changes in the plasma profiles and are not particularly ECRH specific., QC 20171121

Modeling of Ion Cyclotron Resonance Heating (ICRH) is difficult because of spatial dispersion. Numerical methods based on finite element or finite difference have difficulties in handling spatial dispersive effects, because the response is non-local. Fourier spectral methods can handle spatial dispersion, however, these methods have difficulties in handling the complex geometries outside the plasma domain and tend to produce dense matrices that are time consuming to invert. In this study, we investigate the potential of a new numerical method for solving the spatially dispersive wave equation based on FEM and wavelets. The spatially dispersive terms in the wave equation are evaluated using wavelets, and its contribution is represented as an induced current density in the wave equation. The wave equation is then solved using a finite element scheme, where the induced current density is represented as an inhomogeneous term and added using a fixed point iteration scheme. The method is applied to a case of one dimensional fast wave minority heating, including the up- and downshift in the parallel wave number, where we show that convergence can be obtained in a few iterations., QC 20190625

In DT plasmas, toroidal Alfven eigenmodes (TAEs) can be made unstable by the alpha particles resulting from fusion reactions, and may induce a significant redistribution of fast ions. Recent experiments have been conducted in JET deuterium plasmas in order to prepare scenarios aimed at observing alpha-driven TAEs in a future JET DT campaign. Discharges at low density, large core temperatures associated with the presence of internal transport barriers and characterised by good energetic ion confinement have been performed. ICRH has been used in the hydrogen minority heating regime to probe the TAE stability. The consequent presence of MeV ions has resulted in the observation of TAEs in many instances. The impact of several key parameters on TAE stability could therefore be studied experimentally. Modeling taking into account NBI and ICRH fast ions shows good agreement with the measured neutron rates, and has allowed predictions for DT plasmas to be performed., QC 20180727

Measurements are reported of electromagnetic emission close to the cyclotron frequency of energetic ions in JET plasmas heated by waves in the ion cylotron range of frequencies (ICRF). Hydrogen was the majority ion species in all of these plasmas. The measurements were obtained using a sub-harmonic arc detection system in the transmission lines of one of the ICRF antennas. The measured ion cyclotron emission spectra were strongly filtered by the antenna system, and typically contained sub-structure, consisting of sets of peaks with a separation of a few kHz, suggesting the excitation of compressional Alfven eigenmodes closely spaced in frequency. In most cases the energetic ions can be clearly identified as ICRF wave-accelerated He-3 minority ions, although in two pulses the emission may have been produced by energetic He-4 ions, originating from third harmonic ICRF wave acceleration. It is proposed that the emission close to the He-3 cyclotron frequency was produced by energetic ions of this species undergoing drift orbit excursions to the outer midplane plasma edge. Particle-in-cell and hybrid (kinetic ion, fluid electron) simulations using plasma parameters corresponding to edge plasma conditions in these JET pulses, and energetic particle parameters inferred from the cyclotron resonance location, indicate strong excitation of waves at multiple He-3 cyclotron harmonics, including the fundamental, which is identified with the observed emission. These results underline the potential importance of ICE measurements as a method of studying confined fast particles that are strongly suprathermal but have insufficient energies or are not present in sufficient numbers to excite detectable levels of gamma-ray emission or other collective instabilities., QC 20220301

In the last years, it has become apparent that detecting disruptions with sufficient anticipation time is an essential but not exclusive task of predictors. It is also important that the prediction is accompanied by appropriate qualifications of its reliability and it is formulated in mathematical terms appropriate for the task at hand (mitigation, avoidance, classification etc.). In this paper, a wide series of rule-based predictors, of the Classification and Regression Trees (CART) family, have been compared to assess their relative merits. An original refinement of the training, called noise-based ensembles, has allowed not only to obtain significantly better performance but also to increase the interpretability of the results. The final predictors can indeed be represented by a tree or a series of specific and clear rules. Such performance has been proved by analysing large databases of shots on JET with both the carbon wall and the ITER Like Wall. In terms of performance, the developed tools are therefore very competitive with other machine learning techniques, with the specificity of formulating the final models in terms of trees and simple rules., QC 20220301

The design and operation of future fusion devices relying on H-mode plasmas requires reliable modelling of edge-localized modes (ELMs) for precise prediction of divertor target conditions. An extensive experimental validation of simple analytical predictions of the time evolution of target plasma loads during ELMs has been carried out here in more than 70 JET-ITER-like wall H-mode experiments with a wide range of conditions. Comparisons of these analytical predictions with diagnostic measurements of target ion flux density, power density, impact energy and electron temperature during ELMs are presented in this paper and show excellent agreement. The analytical predictions tested here are made with the 'free-streaming' kinetic model (FSM) which describes ELMs as a quasi-neutral plasma bunch expanding along the magnetic field lines into the Scrape-Off Layer without collisions. Consequences of the FSM on energy reflection and deposition on divertor targets during ELMs are also discussed., QC 20220301

QC 20220510

Reliable algorithms for disruption avoidance and prediction are foreseen to play a fundamental role in the JET control system for the successful operation of the machine in the upcoming deuterium-tritium campaigns. The integration of such algorithms is expected to be a key part also in the implementation of the ITER plasma control system. So far, most of the effort has been devoted to the prediction of disruptions, which is required to mitigate the effects of these transient events, protecting the integrity of in-vessel components. Nevertheless, in order to put in place recover strategies or to have the possibility of a soft landing for the plasma current, the paradigm must be shifted to avoiding disruptions. In this paper, plasma profile-based indicators will be statistically analyzed showing their potential in such a perspective, where warning times and reliability of detection are crucial., QC 20211101

Alpha heating experiments in the Tokamak Fusion Test Reactor (TFTR) and in the Joint European Torus (JET) 1997 DTE1 campaign arc reexamined. In TFTR supershots central electron heating of both deuterium only and deuterium-tritium supershots was dominated by thermal ion-electron heat transfer rate p(ie). The higher T-e in deuterium-tritium supershots was mainly due to higher T-i largely caused by isotopic mass effects of neutral beam-thermal ion heating. The thermal ion-electron heating dominated the electron heating in the center. The ratio of the predicted alpha to total electron heating rates f(alp) is less than 0.30. Thus alpha heating (and possible favorable isotopic mass scaling of the thermal plasma) were too small to be measured reliably. The JET alpha heating Hot-Ion H-mode discharges had lower T-i/T-e, and thus had lower p(ie) and the deuterium-tritium DT discharges had higher f(alp), than in TFTR. There were not enough comparable discharges to verify alpha heating. The high performance phases consisted of rampup to brief flattop durations. At equal times during the rampup phase central T-e and T-i were linearly correlated with the thermal hydrogcnic isotopic mass < A >(hyd) which co-varied with beam ion pressure, the tritium fraction of neutral beam power, and the time delay to the first significant sawteeth which interrupted the T-e increases. For both devices the expected alpha healing rate and the null hypothesis of no alpha heating arc consistent with the measurements within the measurement and modeling uncertainties., QC 20211031

Runaways are suprathermal electrons having sufficiently high energy to be continuously accelerated up to tens of MeV by a driving electric field (Connor and Hastie 1975 Nucl. Fusion 15 415). Highly energetic runaway electron (RE) beams capable of damaging the tokamak first wall can be observed after a plasma disruption (Reux et al 2015 Nucl. Fusion 55 129501). Therefore, it is of primary importance to fully understand their generation mechanisms in order to design mitigation systems able to guarantee safe tokamak operations. In a previous work, Sommariva et al (2018 Nucl. Fusion 58), a test particle tracker was introduced in the JOREK 3D non-linear MHD code and used for studying the electron confinement during a simulated JET-like disruption. It was found in Sommariva et al (2018 Nucl. Fusion 58) that relativistic electrons are not completely deconfined by the stochastic magnetic field taking place during the disruption thermal quench (TQ). This is due to the reformation of closed magnetic surfaces at the beginning of the current quench (CQ). This result was obtained neglecting the inductive electric field in order to avoid the unrealistic particle acceleration which otherwise would have happened due to the absence of collision effects. The present paper extends (Sommariva et al 2018 Nucl. Fusion 58) analysing test electron dynamics in the same simulated JET-like disruption using the complete electric field. For doing so, a simplified collision model is introduced in the particle tracker guiding center equations. We show that electrons at thermal energies can become RE during or promptly after the TQ due to a combination of three phenomena: a first REs acceleration during the TQ due to the presence of a complex MHD-induced electric field, particle reconfinement caused by the fast reformation of closed magnetic surfaces after the TQ and a secondary acceleration induced by the CQ electric field., QC 20211029

Progress in understanding lower hybrid current drive (LHCD) at high density has been made through experiments and modeling, which is encouraging given the need for an efficient off-axis current profile control technique in burning plasma. By reducing the wall recycling of neutrals, the edge temperature is increased and the effect of parametric instability (PI) and collisional absorption (CA) is reduced, which is beneficial for increasing the current drive efficiency. Strong single pass absorption is preferred to prevent CA and high LH operating frequency is essential for wave propagation to the core region at high density, presumably to mitigate the effect of PI. The dimensionless parameter that characterizes LH wave accessibility and wave refraction for the experiments in this joint study is shown to bracket the region in parameter space where ITER LHCD experiments will operate in the steady state scenario phase. Further joint experiments and cross modeling are necessary to understand the LHCD physics in weak damping regimes which would increase confidence in predictions for ITER where the absorption is expected to be strong., QC 20211029

This paper details progress in experimental characterisation work at JET for the long-term irradiation station, conducted as part of a project to perform activation experiments using ITER materials. The aim is to take advantage of the significant 14 MeV neutron yield expected during JET operations to irradiate samples of materials that will be used in the manufacturing of ITER tokamak components, such as Nb3Sn, SS316L steels from a range of manufacturers, SS304B, Alloy 660, W, CuCrZr, OF-Cu, XM-19, Al bronze, NbTi and EUROFER. This paper presents an assessment of the nuclear environment at the relevant irradiation locations at JET, measured using a range of high purity dosimetry foils: Ti, Ni, Y, Fe, Co, Sc, and Ta, irradiated with fusion neutrons at JET over a period of 15 months. Experimental results arc presented and compared to simulation predictions using a JET MCNP model coupled with the FISPACT-II inventory code. Comparisons are made for a total of 11 nuclear reactions using a range of nuclear data libraries in calculations., QC 20211031

Real-time (RT) disruption prediction (DP) is essential to trigger mitigation actions that avoid irreversible damage to the devices. This paper deals with disruption mitigation alarms and performs the RT implementation of a probabilistic predictor. The RT implementation has been carried out with a fast controller with DAQ FPGA-based data acquisition devices corresponding to ITER catalogue (in particular, a reconfigurable Input/Output platform has been used). Up to three input signals have been used and relevant information for the prediction is extracted from the temporal and the frequency domains. The signals are read from the JET database. Then D/A conversions are carried out and used as inputs to the real time system. In this way, the whole process of digitization, data analysis and prediction is performed. The computation time for each prediction takes less than 200 mu s., QC 20211027