Search

Copyright of Revista Española de Orientación y Psicopedagogía (REOP) is the property of Revista Espanola de Orientacion y Psicopedagogia (REOP) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Only 0.1% of polyurethanes available on the market are from renewable sources. With increasing concern about climate change, the substitution of monomers derived from petrochemical sources and the application of eco-friendly synthesis processes is crucial for the development of biomaterials. Therefore, polyhydroxyurethanes have been utilized, as their synthesis route allows for the carbonation of vegetable oils with carbon dioxide and the substitution of isocyanates known for their high toxicity, carcinogenicity, and petrochemical origin. In this study, polyhydroxyurethanes were obtained from carbonated soybean oil in combination with two diamines, one that is aliphatic (1,4-butadiamine (putrescine)) and another that is cycloaliphatic (1,3-cyclohexanobis(methylamine)). Four polyhydroxyurethanes were obtained, showing stability in hydrolytic and oxidative media, thermal stability above 200 °C, tensile strength between 0.9 and 1.1 MPa, an elongation at break between 81 and 222%, a water absorption rate up 102%, and contact angles between 63.70 and 101.39. New formulations of bio-based NIPHUs can be developed with the inclusion of a cycloaliphatic diamine (CHM) for the improvement of mechanical properties, which represents a more sustainable process for obtaining NIPHUs with the physicochemical, mechanical, and thermal properties required for the preparation of wound dressings. [ABSTRACT FROM AUTHOR]

Copyright of Cuadernos del Centro de Estudios de Diseño y Comunicación is the property of Cuadernos del Centro de Estudios de Diseno y Comunicacion and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In anthropic savanna ecosystems from the Iberian Peninsula (i.e. dehesa), complex interactions between climate change, pathogen outbreaks and human land use are presumed to be behind the observed increase in holm oak decline. These environmental disturbances alter the plant–soil microbial continuum, which can destabilize the ecological balance that sustains tree health. Yet, little is known about the underlying mechanisms, particularly the directions and nature of the causal–effect relationships between plants and soil microbial communities.In this study, we aimed to determine the role of plant–soil feedbacks in climate‐induced holm oak decline in the Iberian dehesa. Using a gradient of holm oak health, we reconstructed key soil biogeochemical cycles mediated by soil microbial communities. We used quantitative microbial element cycling (QMEC), a functional gene‐array‐based high‐throughput technique to assess microbial functional potential in carbon, nitrogen, phosphorus and sulphur cycling.The onset of holm oak decline was positively related to the increase in relative abundance of soil microbial functional genes associated with denitrification and phosphorus mineralization (i.e. nirS3, ppx and pqqC; parameter value: 0.21, 0.23 and 0.4; p < 0.05). Structural equation model (χ2 = 32.26, p‐value = 0.73), moreover, showed a negative association between these functional genes and soil nutrient availability (i.e. mainly mineral nitrogen and phosphate). Particularly, the holm oak crown health was mainly determined by the abundance of phosphate (parameter value = 0.27; p‐value < 0.05) and organic phosphorus (parameter value = −0.37; p‐value < 0.5).Hence, we propose a potential tree–soil feedback loop, in which the decline of holm oak promotes changes in the soil environment that triggers changes in key microbial‐mediated metabolic pathways related to the net loss of soil nitrogen and phosphorus mineral forms. The shortage of essential nutrients, in turn, affects the ability of the trees to withstand the environmental stressors to which they are exposed. Read the free Plain Language Summary for this article on the Journal blog. [ABSTRACT FROM AUTHOR]

The material design of vascular grafts is required for their application in the health sector. The use of polyurethanes (PUs) in vascular grafts intended for application in the body appears to be adequate due to the fact that native tissues have similar properties as PUs. However, the influence of chemical structure on the biomechanics of PUs remains poorly described. The use of constitutive models, together with numerical studies, is a powerful tool for evaluating the mechanical behavior of materials under specific physiological conditions. Therefore, the aim of this study was to assess the mechanical properties of different PU mixtures formed by polycaprolactone diol, polyethylene glycol, and pentaerythritol using uniaxial tensile, strain sweep, and multistep creep-recovery tests. Evaluations of the properties were also recorded after samples had been soaked in phosphate-buffer saline (PBS) to simulate physiological conditions. A hyperelastic model based on the Mooney–Rivlin strain density function was employed to model the performance of PUs under physiological pressure and geometry conditions. The results show that the inclusion of polyethylene glycol enhanced viscous flow, while polycaprolactone diol increased the elastic behavior. Furthermore, tensile tests revealed that hydration had an important effect on the softening phenomenon. Additionally, after the hydration of PUs, the ultimate strength was similar to those reported for other vascular conduits. Lastly, hyperelastic models revealed that the compliance of the PUs showed a cyclic behavior within the tested time and pressure conditions and is affected by the material composition. However, the compliance was not affected by the geometry of the materials. These tests demonstrate that the materials whose compositions are 5–90–5 and 46.3–46.3–7.5 could be employed in the designs of vascular grafts for medical applications since they present the largest value of compliance, ultimate strength, and elongation at break in the range of reported blood vessels, thus indicating their suitability. Moreover, the polyurethanes were revealed to undergo softening after hydration, which could reduce the risk of vascular trauma.