Search

Objectives: Final root canal irrigation should ideally maintain the physicochemical stability of root canal sealers. We seek to assess the effect of contact with 2% chlorhexidine digluconate (CHX) on the physicochemical properties of AH Plus, BioRoot™ RCS, and Pulp Canal Sealer (PCS)., Methods: Mixed sealers were placed in cylindrical teflon molds and allowed to set for 1.5x the manufacturers' setting time. Half of the specimens had their free surface in contact with CHX for the first minute of their setting period. Solubility, radiopacity, surface roughness, microhardness and wettability of the sealers were assessed up to 28 days after setting. Elemental analysis of sealer surfaces and their leachates together with pH measurements were also performed. Appropriate parametric and non-parametric analysis with post hoc tests were performed (p < 0.05)., Results: Exposure to CHX had no effect on solubility and radiopacity of all sealers. CHX altered the surface roughness of PCS and BioRoot RCS (p < 0.05). Contact with CHX reduced the microhardness of AH Plus and PCS (p < 0.05). AH Plus was more hydrophilic after CHX contact, whereas PCS became more hydrophobic (p < 0.05). AH Plus and PCS surfaces appeared to adsorb CHX as exhibited by chlorine peaks after contact with CHX. Sealer leachates' alkalinity was not affected. CHX increased elution of silicon and zirconium for BioRoot and zinc for PCS leachates., Significance: In our study, CHX affected sealers' physicochemical properties to various extents. Further studies are needed to confirm the obtained results by investigating various final irrigation strategies and correlating to biological properties., Competing Interests: Declaration of Competing Interest none., (Copyright © 2023 The Authors. Published by Elsevier Inc. All rights reserved.)

The main objective of this systematic review was to assess cancer risk, and mortality after cancer diagnosis, for exclusive users of Swedish snus, compared with non-users of tobacco. We followed international standards for systematic reviews and graded our confidence in the risk estimates using the GRADE approach. Our search gave 2450 articles, of which 67 were assessed in full text against our inclusion criteria. Of these, 14 cohort-studies and one case-control study were included in the review. The studies investigated risk of cancer in the oral cavity or oropharynx (3 studies), esophagus (1 study), stomach (1 study), pancreas (2 studies), colorectum (2 studies), anus (1 study) and lung (1 study), as well as malignant lymphoma (1 study), leukemia and multiple myeloma (1 study), melanoma (1 study), any cancer (1 study) and mortality after cancer diagnosis (4 studies). Cancer risk could only be evaluated in men as there was a general lack of data for women. All included studies were evaluated to have a moderate risk of bias, mostly related to validity of exposure information. An increased risk of cancer of the esophagus, pancreas, stomach and rectum as well as an association between use of snus and increased mortality after a cancer diagnosis was reported. Our confidence in the various risk estimates varied from moderate through low to very low., (© 2023 The Authors. International Journal of Cancer published by John Wiley & Sons Ltd on behalf of UICC.)

This study assessed the antibacterial characteristics of the dentin/material interface and dentin surfaces exposed to experimental hydraulic calcium silicate cement (HCSC) with or without bioactive glass (BG) replacement (20% or 40%) or mixed with a silver nanoparticle (SNP) solution (1 or 2 mg/mL), and Biodentine, TotalFill BC RRM putty and Intermediate Restorative Material (IRM). Human root dentin segments with test materials were assessed at 1 or 28 days. In one series, the specimens were split to expose the dentin and material surfaces. A 24 h direct contact test was conducted against three-day established Enterococcus faecalis and Pseudomonas aeruginosa monospecies biofilms. In another series, the dentin/material interface of intact specimens was exposed to biofilm membranes for 3 days and the antibacterial activity was assessed via confocal microscopy. The interface was additionally characterised. All one-day material and dentin surfaces were antibacterial. Dentin surfaces exposed to HCSC with 40% BG-replacement, Biodentine and IRM had decreased antibacterial properties compared to those of the other cements. The HCSC mixed with a 2 mg/mL SNP solution had the highest antimicrobial effect in the confocal assay. The interfacial characteristics of HCSCs were similar. The test materials conferred antibacterial activity onto the adjacent dentin. The BG reduced the antibacterial effect of dentin exposed to HCSC; a 2 mg/mL SNP solution increased the antibacterial potential for longer interaction periods (three-day exposure).

This study investigated the role of aging and changes in environmental conditions on selected properties of a prototype radiopacified calcium silicate-based cement (TZ-base) with or without incorporation of silver nanoparticles or bioactive glass, and two commercial materials, Biodentine and intermediate restorative material. Materials were immersed in ultrapure water or fetal bovine serum for 28 days and were characterized with scanning electron microscopy and energy dispersive x-ray analysis. Immersion media were either replaced weekly or not replenished at all and were assessed for alkalinity and calcium release after 1, 7, 14, 21, and 28 days; antibacterial effect against 2-day monospecies biofilms; and cytotoxicity by the 3-(4,5 dimethylthiazolyl-2-yl)-2,5-diphenyl tetrazolium bromide assay after 1, 7, or 28 days. Alkalinity, calcium release, antibacterial activity, and cell cytotoxicity increased over time when the medium was not changed but decreased with medium replenishment. Immersion in fetal bovine serum resulted in lower alkalinity, less bactericidal properties, and lower cytotoxicity of prototype cements and Biodentine than did water immersion. Biodentine and 20% bioactive glass-containing cement had overall lower alkalinity, calcium release, and antibacterial activity than TZ-base, and Biodentine was less cytotoxic than TZ-base. In conclusion, exposure conditions and cement modifications significantly affected materials' leaching properties. Exposure conditions warrant consideration when evaluating cements' clinical properties., (© 2023 The Authors. European Journal of Oral Sciences published by John Wiley & Sons Ltd on behalf of Scandinavian Division of the International Association for Dental Research.)

Objective: Use of snus, a moist, smokeless tobacco product, may lead to local changes in the oral mucous membrane in the area where the snus is placed. It can also cause irreversible gingival retraction. This cross-sectional study aimed to investigate the relationship between use of snus, oral mucosal lesions (snus induced lesions) and gingival retractions among adolescents in Norway., Material and Methods: All 18-20 years olds visiting public dental health clinics in the south-eastern region of Norway between October 2015 and December 2016 were invited to participate. All participants ( n  = 1363) filled in an electronic questionnaire before a clinical examination. Of these, 216 used snus daily., Results: Snus induced lesions were observed in 79.2% of daily snus using participants. In adjusted regression analyses, the odds of having a more severe lesion as opposed to a less severe lesion were 1.12 times greater for each additional box of snus used in a month ( p  < .01). Women were 46% less likely to have a severe lesion than men ( p  = .03). Gingival retractions were observed in 18.4% of the participants. The odds for dental retraction were significantly higher by 34% for each year of snus use., Conclusions: Most of the adolescents using snus had snus induced lesions, whereas approximately one-fifth had gingival retractions. The severity of the lesion and gingival retraction increased with the amount of snus boxes used and the duration of the snus use, respectively.

Background and Aims: Smokeless tobacco is a heterogeneous product group with diverse composition and prevalence globally. Tobacco use during pregnancy is concerning due to the risk of adverse pregnancy outcomes and effects on child health. Nicotine may mediate several of these effects. This systematic review measured health outcomes from Swedish smokeless tobacco (snus) use during pregnancy., Method: Literature search was conducted by an information specialist in May 2022. We included human studies of snus use during pregnancy compared with no tobacco use, assessed risk of bias, conducted a meta-analysis and assessed confidence in effect-estimates using Grading of Recommendations, Assessment, Development and Evaluations (GRADE)., Results: We included 18 cohort studies (42 to 1 006 398 participants). Snus use during pregnancy probably (moderate confidence in risk estimates) increase the risk of neonatal apnea, adjusted odds ratio 95% confidence interval [aOR (95% CI)] 1.96 (1.30 to 2.96). Snus use during pregnancy possibly (low confidence in risk estimates) increase the risk of stillbirths aOR 1.43 (1.02 to 1.99), extremely premature births aOR 1.69 (1.17 to 2.45), moderately premature birth aOR 1.26 (1.15 to 1.38), SGA aOR 1.26 (1.09 to 1.46), reduced birth weight mean difference of 72.47 g (110.58 g to 34.35 g reduction) and oral cleft malformations aOR 1.48 (1.00 to 2.21). It is uncertain (low confidence in risk estimates, CI crossing 1) whether snus use during pregnancy affects risk of preeclampsia aOR 1.11 (0.97 to 1.28), antenatal bleeding aOR 1.15 (0.92 to 1.44) and very premature birth aOR 1.26 (0.95 to 1.66). Risk of early neonatal mortality and altered heart rate variability is uncertain, very low confidence. Snus using mothers had increased prevalence of caesarean sections, low confidence., Conclusions: This systematic review reveals that use of smokeless tobacco (snus) during pregnancy may adversely impact the developing child., (© 2023 The Authors. Addiction published by John Wiley & Sons Ltd on behalf of Society for the Study of Addiction.)

For individuals with very high to extremely high caries activity and poor control of daily oral hygiene, a simple treatment for arresting their caries activity is necessary. Silver Diamine Fluoride (SDF) has become increasingly common for this purpose due to its efficacy and ease of application. To avoid or reduce tooth discoloration after SDF treatment potassium iodide (KI) may be applied. However, the release of silver from SDF-treated tooth surfaces may be of concern. Thus, the aim of the present study was to quantify the amount of silver leached in both a short- and long-term perspective. In this in vitro experiment we measured the cumulative release of silver from SDF-treated dentin surfaces with and without imminent application of KI, and with and without phosphoric acid etching as pre-treatment, after 24 h and weekly for four weeks. The release of silver was highest after 24 h for all treatment groups, with a significant drop after this point. When etching was not used, the use of KI did not affect the release of silver. However, when etching was used, there was a significantly lower silver release when KI was also used compared to when KI was not used. This effect was largest for the first two weeks, after which the difference was smaller as all groups released low amounts of silver., Competing Interests: No potential conflict of interest was reported by the author(s)., (© 2023 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.)

Aim: We investigated factors associated with the initiation and continuation of snus use in adolescents in Norway. The associations with adolescents' own educational plans, the parents' educational level(s) and tobacco habits were estimated., Methods: In this cross-sectional questionnaire-based study, 1465 patients aged 18-20 years participated. The questionnaire was administered at regular dental examinations in the public dental health service. To assess the association between individual factors and the initiation of tobacco habits, a generalised structural equation model with random effects at the clinic level was used. Binary responses were modelled using multilevel binary logistic regression, while the number of snus boxes used per month was modelled using a multilevel Poisson regression model., Results: Of current (daily and occasional) tobacco users, 85% were snus users, including dual users of both snus and cigarettes. The median age of snus initiation was 16 years. Both parental snus use and smoking were associated with an increased risk of snus initiation, snus use and a higher amount of use. An increased risk of using snus was associated with male gender and with no educational plans or planning for further vocational education. The amount of snus used was higher among current snus users with a prior smoking history and among those planning for further vocational education., Conclusions: These findings may aid in developing and targeting tobacco prevention strategies aimed at young people. Tobacco prevention measures should start at the elementary school level. The strong association with parental tobacco habits underlines the importance of parents' influence on their children's tobacco use.

Objectives: To investigate the effect of inclusion of silver nano-particles (SNP) or bioactive glass (BG) on the surface characteristics and bacterial adhesion of prototype tricalcium silicate (TCS)-based cements alongside two commercial cements, under different aging periods and exposure conditions., Materials and Methods: A basic formulation of radio-opacified TCS without (TZ-base) and with additions of SNP (0.5, 1, or 2 mg/ml) or BG (10 or 20%) was used. Biodentine and intermediate restorative material (IRM) served as reference materials. Material disks were immersed in ultrapure water or fetal bovine serum (FBS) for 1, 7, or 28 days. Surface roughness (n = 3), microhardness (n = 9), and wettability (n = 6) were analyzed by standard procedures. Adhesion of Enterococcus faecalis was assessed by fluorescence microscopy (n = 5). Data from these assays were evaluated for normality and comparisons among groups were conducted with statistical procedures (p < 0.05 for significance)., Results: The surface morphology of SNP- and BG-containing cements had higher roughness values than TZ-base after 28 days (p < 0.05). No differences in microhardness were observed among prototype cements (p > 0.05). Biodentine presented smooth surface characteristics and the highest hardness values (p < 0.05). The FBS-immersion resulted in surface reactions in prototype materials and Biodentine, depicted with scanning electron microscopy. All 1- and 7-day prototype cements showed negligible bacterial adhesion, while in Biodentine and IRM, noticeable E. faecalis adherence was observed from day 1 (p < 0.05)., Conclusions: Incorporation of SNP or BG did not improve the antibacterial effect of the experimental cement; all 28-day aged materials failed to inhibit bacterial adherence. The measured physical parameters did not appear to be related to the degree of bacterial adhesion. Exposure of TCS-based cements in FBS resulted in surface reactions, which did not affect bacterial adhesion., Clinical Relevance: Changes in the surface characteristics of prototype TCS-based cements by inclusion of SNP and BG or exposure to different environments did not affect bacterial adhesion. All experimental materials showed inferior physical properties and higher antibacterial effect than Biodentine., (© 2022. The Author(s).)

Objective: Assess the biological and physicochemical properties of AH Plus, BioRoot RCS and Pulp Canal Sealer (PCS) leachates with and without chlorhexidine (CHX)., Methods: The sealers were studied in no contact and 1-minute contact with CHX. For biological properties (antibacterial activity and cytotoxicity), leachates were formed in saline of freshly mixed, 1-, 7- and 28 days set sealers. The antibacterial properties of sealer leachates were investigated for planktonic and biofilm growth of E. faecalis, S. mutans, S.epidermidis and S.aureus. The 3-(4,5 dimethylthiazolyl-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay was used to evaluate murine fibroblast cell viability after exposure to the leachates. The physical properties (water uptake, sorption, solubility, porosity, surface characteristics) of sealers and the pH of the immersion liquid (saline or distilled water) were also assessed over a 28-days period., Results: CHX improved the antibacterial properties of the sealer leachates and reduced cell viability for all sealer leachates, except for freshly mixed PCS. BioRoot RCS leachates presented the highest antibacterial properties and cell viability with and without CHX contact. PCS was the material most affected by CHX in terms of physical properties, whereas for AH Plus, solubility was increased. CHX did not affect the physical properties of BioRoot RCS, except for solubility that was decreased. CHX contact did not change sealers' alkalinity in distilled water whereas it increased it for AH Plus and BioRoot RCS in saline., Significance: CHX improved the antibacterial efficacy of sealer leachates and either compromised or did not affect cell viability. CHX affected to various extent sealers' physicochemical properties., (Copyright © 2022 The Authors. Published by Elsevier Inc. All rights reserved.)

Developing new implant surfaces with anti-adhesion bacterial properties used for medical devices remains a challenge. Here we describe a novel study investigating nanotopography influences on bacterial adhesion on surfaces with controlled interspatial nanopillar distances. The surfaces were coated with proteins (fibrinogen, collagen, serum and saliva) prior to E. coli-WT adhesion under flow conditions. PiFM provided chemical mapping and showed that proteins adsorbed both between and onto the nanopillars with a preference for areas between the nanopillars. E. coli-WT adhered least to protein-coated areas with low surface nanopillar coverage, most to surfaces coated with saliva, while human serum led to the lowest adhesion. Protein-coated nanostructured surfaces affected the adhesion of E. coli-WT .

The principle of antimicrobial photodynamic therapy (PDT) is appealing because it can be controlled by an external light source and possibly the use of durable materials. However, to utilise such surfaces requires a process for their production that allows for coating on even complex geometries. We have therefore explored the ability of the emerging molecular layer deposition (MLD) technique to produce and tune PDT active materials. This study demonstrates how the type of aromatic ligand influences the optical and antimicrobial properties of photoactive Zr-organic hybrid thin films made by MLD. The three aromatic dicarboxylic acids: 2,5-dihydroxy-1,4-benzenedicarboxylic acid, 2-amino-1,4-benzenedicarboxylic acid and 2,6-naphthalenedicarboxylic acid have been combined with ZrCl 4 to produce hybrid coatings. The first system has not been previously described by MLD and is therefore more thoroughly investigated using in situ quartz crystal microbalance (QCM), Fourier transform infrared (FTIR) and UV-Vis spectroscopy. The antibacterial phototoxic effects of Zr-organic hybrids have been explored in the Staphylococcus aureus bacteria model using a UVA/blue light source. Films based on the 2,6-naphthalenedicarboxylic acid linker significantly reduced the number of viable bacteria by 99.9%, while no apparent activity was observed for the two other photoactive systems. Our work thus provides evidence that the MLD technique is a suitable tool to produce high-quality novel materials for possible applications in antimicrobial PDT, however it requires a careful selection of aromatic ligands used to construct photoactive materials., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Tobacco smoking and use of snus (smokeless tobacco) are associated with adverse effects on pregnancy and neonatal outcomes. Nicotine is considered a key toxicant involved in effects caused by both smoking and snus, while pyrolysis products including polycyclic aromatic hydrocarbons (PAHs) in cigarette smoke represents the constituents most unequally divided between these two groups of tobacco products. The aim of this review was: i) to compare the impact, in terms of relative effect estimates, of cigarette smoking and use of Swedish snus on pregnancy outcomes using similar non-tobacco user controls, and ii) to examine whether exposure to PAHs from smoking could explain possible differences in impact on pregnancy outcomes. We systematically searched MEDLINE, Embase, PsycInfo, Web of Science and the Cochrane Database of Systematic Reviews up to October 2021 and identified studies reporting risks for adverse pregnancy and neonatal outcomes associated with snus use and with smoking relative to pregnant women with no use of tobacco. Both snus use and smoking were associated with increased risk of stillbirth, preterm birth, and oral cleft malformation, with comparable point estimates. These effects were likely due to comparable nicotine exposure. We also found striking differences. While both smoking and snus increased the risk of having small for gestational age (SGA) infants, risk from maternal smoking was markedly higher as was the reduction in birthweight. In contrast, the risk of preeclampsia (PE) was markedly lower in smokers than in controls, while snus use was associated with a slightly increased risk. We suggest that PAHs acting via AhR may explain the stronger effects of tobacco smoking on SGA and also to the apparent protective effect of cigarette smoking on PE. Possible mechanisms involved include: i) disrupted endocrine control of fetal development as well as placental development and function, and ii) stress adaption and immune suppression in placenta and mother., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Aim: The aim of this in vitro study was to compare nine different bonding agents of so-called universal type with one well-recognized, 3-step etch-and-rinse bonding agent, as control, in a composite-to-composite shear bond strength (SBS) test., Materials and Methods: Cylindrical composite substrates were made according to manufacturers' specifications and potted in epoxy according to the description in ISO TS 29022:2003. They were stored in water (37 °C) for 2 months (for water sorption). New composite was bonded to the substrates using nine different bonding agents of universal type, and one 3-step etch-and-rinse bonding agent as control. Fifteen specimens were made for each bonding agent as required by ISO 29022. SBS testing was performed as described in the standard. Vertical load was applied at the speed of 1 mm/min, using a universal testing machine. Two test series were performed: (A) Short term test of SBS after 2 weeks (B) Long term test of SBS after 1-year storage of specimens in water at 37 °C., Results: Test results for the short term test (A); composite-to-composite SBS mean values ranged from 12.0 to 24.9 MPa, and for the long term test (B), SBS ranged from 11.4 to 25 MPa. Six universal bonding agents showed significantly higher bond strength than control in 1-year test., Conclusion: In this in vitro study, testing shear bond strength of composite-to-composite bonding, the universal bonding agents performed similar and for some agents better than the 3-step etch-and-rinse bonding agent. New simplified bonding procedures seem reliable for repair of composite., Competing Interests: No potential conflict of interest was reported by the author(s)., (© 2022 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.)

Aim: Assess whether sodium hypochlorite (NaOCl) or chlorhexidine (CHX) and two irrigation protocols may alter the antibacterial properties of dentine and three endodontic sealers using a novel ex vivo tooth model., Methodology: Prior to antibacterial testing, the tooth model was validated by means of scanning electron microscopy (SEM) to evaluate the separation between dentine and sealer surfaces. Root blocks prepared from extracted human roots were pre-treated with 17% EDTA + 0.9% saline and subsequently treated with 1% NaOCl (G1), 2% CHX (G2) or no irrigant (G3). Two irrigation protocols were further investigated, "1% NaOCl + 17% EDTA" (P1) and "1% NaOCl + 17% EDTA + 2% CHX" (P2). Following irrigation, the root blocks were either filled with AH Plus, BioRoot RCS and Pulp Canal Sealer (PCS), or left empty. All groups were incubated for 1, 7 and 28 days. Direct contact tests for planktonic E. faecalis and 48 h E. faecalis biofilms were performed at the level of dentine and sealer surfaces. Statistical analysis was performed on the bacterial survival between irrigants (G1, G2 and G3) and between irrigation protocols (P1 and P2); p < .05., Results: The model was considered reproducible as SEM examination of dentine samples indicated consistent separation between dentine and sealer surfaces. Irrigation with CHX (G2) and irrigation protocol P2 enhanced the antibacterial properties of dentine without sealer application as well as dentine in contact with all three sealers tested, especially against planktonic E. faecalis. G2 and P2 also improved the antibacterial effect of AH Plus surfaces for all three incubation times. No irrigation groups (G1, G2) or irrigation protocols (P1, P2) altered the antibacterial properties of BioRoot RCS surfaces against planktonic bacteria or biofilms. Only BioRoot RCS surfaces eliminated the planktonic E. faecalis in all irrigation groups (G1, G2, G3) and protocols (P1, P2) investigated whilst PCS surfaces eliminate E. faecalis in biofilms in all groups up to 7 days., Conclusions: The tooth model was reproducible. CHX improved the antibacterial activity upon both sealer and dentine surfaces. Amongst sealers, BioRoot RCS was less affected by NaOCl and CHX, and exhibited high antibacterial properties regardless the irrigation applied., (© 2022 The Authors. International Endodontic Journal published by John Wiley & Sons Ltd on behalf of British Endodontic Society.)

Objectives: To assess long-term survival of pulpotomized primary molars and factors related to the survival of the teeth., Materials and Methods: This retrospective longitudinal study was based on electronic dental health records of children who attended public health service. Eligible children were <12 years and had a pulpotomy procedure code in their dental treatment history. Data were obtained in the period between 2002 and 2016. Chi-squared test, t -test, and one-way ANOVA were used to assess for statistical differences. Kaplan-Meier analyses were performed to create survival estimates, and the log-rank test was performed to compare differences in survival distributions. A multivariate Cox regression was conducted, and hazard ratios were calculated to estimate the hazard rate for failure., Results: Of interventions, 40% were registered in children 3-6 years of age; 56% were boys. Mean estimated survival of such molars was 82 months (SEM = 0.6) and differed by dental operator's work setting and choice of restorative materials used after pulpotomy intervention. Using a stainless steel crown (SSC) to restore pulp-intervened primary molars had the strongest effect on survival (111 months with SEM = 1.8), followed by if the intervention was performed by a specialist or specializing dentist in paediatric dentistry (99 months with SEM = 2.6)., Conclusions: The estimated survival time of pulpotomized primary molars is affected by dental operator-related factors, which should be considered in management of extensively carious primary molars of paediatric patients, both at the clinical and organizational decision-making levels. An increased focus on the use of SSC is recommended to be in the learning objectives of dental education programs.

We here report on photoactive organic-inorganic hybrid thin films prepared by the molecular layer deposition (MLD) method. The new series of hybrid films deposited using 2,6-naphthalenedicarboxylic acid (2,6-NDC) and either hafnium chloride (HfCl 4 ), yttrium tetramethylheptanedionate (Y(thd) 3 ) or titanium chloride (TiCl 4 ) were compared with the known zirconium chloride (ZrCl 4 ) based system. All metal-naphthalene films are amorphous as-deposited and show self-saturating growth as expected for an ideal MLD process with varied growth rates depending on the choice of metal precursor. The growth was studied in situ using quartz crystal microbalance (QCM) and the films were further characterised using spectroscopic ellipsometry (SE), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and UV-Vis and photoluminescence (PL) spectroscopy to obtain information on their physicochemical properties. The hybrid thin films display intense blue photoluminescence, except for the Ti-organic complex in which titanium clusters were found to be an effective PL quencher for the organic linker. We demonstrate how the optical properties of the films depend on the choice of metal component to make a foundation for further studies on these types of organic-inorganic hybrid materials for applications as photoactive agents.

Bacterial fimbriae are an important virulence factor mediating adhesion to both biotic and abiotic surfaces and facilitating biofilm formation. The expression of type 1 fimbriae of Escherichia coli is a key virulence factor for urinary tract infections and catheter-associated urinary tract infections, which represent the most common nosocomial infections. New strategies to reduce adhesion of bacteria to surfaces is therefore warranted. The aim of the present study was to investigate how surfaces with different nanotopography-influenced fimbriae-mediated adhesion. Surfaces with three different nanopattern surface coverages made in polycarbonate were fabricated by injection molding from electron beam lithography nanopatterned templates. The surfaces were constructed with features of approximately 40 nm width and 25 nm height with 100 nm, 250 nm, and 500 nm interspace distance, respectively. The role of fimbriae type 1-mediated adhesion was investigated using the E. coli wild type BW25113 and Δ fimA (with a knockout of major pilus protein FimA) and Δ fimH (with a knockout of minor protein FimH) mutants. For the surfaces with nanotopography, all strains adhered least to areas with the largest interpillar distance (500 nm). For the E. coli wild type , no difference in adhesion between surfaces without pillars and the largest interpillar distance was observed. For the deletion mutants, increased adhesion was observed for surfaces without pillars compared to surfaces with the largest interpillar distance. The presence of a fully functional type 1 fimbria decreased the bacterial adhesion to the nanopatterned surfaces in comparison to the mutants.

Objective: Charcoal-containing dentifrices are gaining popularity, but scientific information on their effect on oral health is scarce. This study investigated properties of dentifrices that may affect dentine abrasivity, as well as their ability to adsorb fluoride, their pH and the presence of harmful substances., Materials and Methods: The dentifrices NAO and COCO were subjected to the following analyses: abrasivity, expressed as mean abraded depth and relative dentin abrasivity (RDA), and surface roughness of extracted human molars ( n  = 30) after simulated brushing; fluoride adsorption measured as concentration change; pH measurements; detection of polycyclic aromatic hydrocarbons by gas chromatography-mass spectrometry. The products were compared to a reference dentifrice (Colgate ® MaxWhite), positive controls (ISO dentifrice slurry, activated charcoal for laboratory use) and a negative control (distilled water)., Results: The mean abraded depths of NAO and COCO were not different ( p  > .05), but higher than the reference dentifrice and the negative control ( p  < .05). The RDA values of NAO, COCO and the ISO dentifrice slurry were higher than the reference dentifrice value ( p  < .05) by up to 10 times. The dentine surface roughness was higher after brushing with NAO, COCO and ISO dentifrice slurry compared to distilled water ( p  < .05). No change in mean adsorbed fluoride concentration was observed after 24 h ( p  > .05). Both NAO and COCO were alkaline (pH > 7). Analysis of NAO revealed the presence of naphthalene (112.8 ± 2.0 ng/mL)., Conclusion: The charcoal-containing dentifrices were abrasive within acceptable limits set by ISO and did not adsorb fluoride. The presence of naphthalene in one product is a cause for concern., Competing Interests: The authors report no conflict of interest. F. Machla was in part funded through an Erasmus+ traineeship., (© 2020 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.)

The aims of the study were to investigate functional and esthetic properties, the composition of the alloy, and the content of hazardous elements of single dental crowns with metal skeleton and fired porcelain. Epoxy models made from full mouth impressions taken of a patient with a crown preparation of the right maxillary first permanent molar were used for production of identical polyether impressions, which were distributed to dentists in Norway. The dentists sent the impressions to their regular dental laboratories. All 55 crowns collected were anonymized and examined. Of the crowns received, 35 were made in Norway, 12 were imported, and 8 were of unknown origin. The evaluation of functional properties revealed that 50% of the Norwegian, 42% of the imported, and 25% of the unknown-origin crowns were considered unacceptable. The composition of the alloy was not in accordance with that stated by the manufacturer for 17%, 13% and 20% of the crowns, where this information was provided. The lead content of the alloy exceeded the limit set by the ISO 22674: 2016 for 18% of the crowns in total. The statement that shall follow the work according to EU-regulations was not complete for approximately 75% of the works received., (© 2020 Eur J Oral Sci.)

Background: A wide range in the prevalence of molar-incisor-hypomineralization (MIH) has been reported. Population-based studies are recommended. However, such studies are expensive and time-consuming. Objectives: To estimate the magnitude of MIH condition among 8-year-olds based on routine oral health examinations and to associate first permanent molar (FPM) affection with that of other permanent teeth over time. Materials and methods: This retrospective study, with cross-sectional and longitudinal components, was based on electronic oral health records; all 8-year-olds examined between 2002 and 2016 were included. Results: The average estimated prevalence of MIH was 8.3%; yearly range was 4.8-15.9%. The mean number of affected teeth was 1.4; 62% had one affected tooth. One-surface defects were the most frequent (66%). Asymmetric distribution of affected teeth was observed. In follow-up, 10.7%, 8.4%, and 11.2% had at least one affected permanent canine, premolar, or second permanent molar, respectively. The proportion of children with other MIH-affected permanent teeth was higher in the group with ≥2 MIH-affected teeth than in group with one affected FPM at the age of 8. Conclusions: The average prevalence of MIH was comparable to that reported elsewhere. The number of MIH-affected teeth at early mixed dentition predicts the affection of other permanent teeth over time, mainly that of permanent canines. Further screening of children with MIH is recommended to improve individually tailored early preventive and restorative dental care.

Objective: This study investigated the effect of surface nano-patterning on adhesion of an oral early commensal colonizer, Streptococcus mitis and the opportunistic pathogen Staphylococcus aureus and human fibroblasts (HDFa) in a laminar flow cell., Methods: Nanostructured surfaces were made by functionalizing glass substrates with 40 nm SiO 2 nanoparticles. Gradients in nanoparticle surface coverage were fabricated to study the effect of nanoparticle spacing within a single experiment. Bacterial adhesion was investigated after 5 min of contact time by subjecting surfaces to a flow in a laminar flow cell. In addition, to examine the particles effect on human cells, the establishment of focal adhesion and spreading of primary human dermal fibroblasts (HDFa) were investigated after 4 and 24 h., Results: Adhesion of both S. aureus and S. mitis decreased on surfaces functionalized with nanoparticles and coincided with higher nanoparticle surface coverage on the surface. Both strains were tested on three separate surfaces. The regression analysis showed that S. mitis was influenced more by surface modification than S. aureus . The establishment of focal adhesions in HDFa cells was delayed on the nanostructured part of the surfaces after both 4 and 24 h of culturing., Significance: In the current manuscript, we have used a flow cell to investigate the effect of nanotopographies on S. aureus and S. mitis adhesion. The present findings are of relevance for design of future implant and prostheses surfaces in order to reduce adhesion of bacteria., Competing Interests: No potential conflict of interest was reported by the author(s)., (© 2020 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.)

Aim: This survey assessed Finnish dentists' treatment decisions and choices of restorative materials in selected paediatric dental patient cases, with special emphasis on stainless steel crowns (SSCs)., Methods: A questionnaire with patient descriptions and tooth photographs was e-mailed to members of Finnish Dental Society (n=3,747). The respondents were asked to choose their preferred treatment in cases describing 1) extensive occlusal carious lesion in a primary molar of a cooperative child; 2) an identical lesion, treated under dental general anaesthesia (DGA); and 3) a symptomatic first permanent molar with enamel hypomineralisation (consistent with Molar-Incisor Hypomineralization, MIH) and post-eruptive breakdown. Only responses from dentist treating children were included (final n=765)., Results: The majority (47.3%) would have preferred restoration of the extensive primary tooth caries in a normal setting using resin-modified glassionomer cement, and 4.3% by using SSC. The preference of SSC as treatment choice increased to 25.4% upon implementation of DGA. The majority would treat the symptomatic permanent MIH molar with a resin composite restoration (45.0%), while 10.5% suggested SSC. Compared to general dentists, paediatric dentists had a stronger preference for SSCs., Conclusions: Although the respondents emphasised patient cooperation, but also tooth prognosis and material strength behind their treatment decisions, SSC was an uncommon choice.

Introduction: Coronal leakage and reinfection after root canal therapy is an important reason for endodontic failure. Zinc oxide-eugenol (ZOE) -based materials are often used as a coronal seal to prevent secondary infection. The antibacterial effect of ZOE cement is mainly due to leaching of eugenol from the material, but the effect is reported to decrease over time. Chitosan (CH) is a natural polymer with antibacterial properties. The aim of the study was to investigate if incorporation of (CH) and chitosan oligosaccharide (COS) in a ZOE-based material improved both the immediate and sustained antibacterial properties of the material. Methods: Enterococcus faecalis , Streptococcus mutans was used to investigate the antibacterial effect of the materials in a modified direct contact test (MDCT) immediately after setting and after storage for 18 weeks in water. Leaching per week of eugenol from the materials was quantified using gas chromatography-mass spectrometry (GC-MS). The effect of eugenol on growth of bacteria was measured by reading of optical density at 600 nm after 18 h growth. Mechanical properties were investigated in a compressive strength test according to ISO 3107. Staphylococcus epidermidis was used to investigate the antibacterial effect of the materials in a modified direct contact test (MDCT) immediately after setting and after storage for 18 weeks in water. Leaching per week of eugenol from the materials was quantified using gas chromatography-mass spectrometry (GC-MS). The effect of eugenol on growth of bacteria was measured by reading of optical density at 600 nm after 18 h growth. Mechanical properties were investigated in a compressive strength test according to ISO 3107. Results: The present study showed that a ZOE-based material has antibacterial activity both as freshly prepared and after immersion in water for 18 weeks. Incorporating CH or COS may increase the antibacterial effect depending on the bacterial species investigated. The amount of leached eugenol did not differ between materials or during or after storage. S. mutans showed the highest susceptibility to eugenol of the three species investigated. Modification of the materials with CH or COS reduced the compressive strength, but the requirements in ISO 3017 were still met., (© 2019 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.)

Objectives: Cellular responses including cell death are induced by in vitro exposure to the un-polymerized dental monomer 2-hydroxyethyl methacrylate (HEMA). Activation of the Nrf2/ARE signaling pathway has been suggested to mediate the cellular responses. Activation of this pathway may occur either indirectly through generation of increased oxidative stress or through direct binding to cysteine thiols due to the electrophilic properties of HEMA. The objective of this study was to elucidate the potential mechanism of Nrf2/ARE pathway activation after HEMA exposure., Methods: Global gene expression was investigated after exposure of the human bronchial epithelial cell line BEAS-2B to 2mM HEMA for 4h. After exposure to 0.5, 1 or 2mM HEMA for up to 24h, western analysis was performed for selected proteins. Finally, the levels of the same proteins were determined after treatment with either the antioxidants Vitamin C, Trolox (6-hydroxy-2,5,7,8-tetramethylchroman-2-carboxylic acid) or BSO (L-buthioninesulfoximine), an inhibitor of GSH formation., Results: Several of the 25 genes with the highest increase in gene transcription are related to oxidative stress responses. Increased levels of 5 corresponding proteins (HO-1, GCLC, GCLM, NQO1 and SQSTM1) were observed. Antioxidant treatment as well as inhibition of GSH did not affect upregulation of these proteins. Thus, increased ROS or reduced GSH levels appear to be of limited importance in the observed HEMA-induced changes., Significance: Knowledge of the cellular responses to HEMA is important to evaluate the safety of HEMA-containing biomaterials. The results support that HEMA activates the Nrf2-ARE transcriptional pathway directly through its electrophilic properties., (Copyright © 2018 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.)

Bacteria within the oral cavity live primarily as complex, polymicrobial biofilms. Dental biofilms are necessary etiological factors for dental caries and periodontal diseases but have also been implicated in diseases outside the oral cavity. Biofilm is the preferred lifestyle for bacteria, and biofilms are found on almost any surface in nature. Bacteria growing within a biofilm exhibit an altered phenotype. Substantial changes in gene expression occur when bacteria are in close proximity or physical contact with one another or with the host. This may facilitate nutritional co-operation, cell-cell signaling, and gene transfer, including transfer of antibiotic-resistance genes, thus rendering biofilm bacteria with properties other than those found in free-floating, planktonic bacteria. We will discuss biofilm properties and possible consequences for future prophylaxis., (© 2018 Eur J Oral Sci.)

Background: Caries decline in the western world is accompanied by strong polarization among children; 8% of Finnish 5-year-olds having 76% of untreated caries. This high caries risk group needs preventive and restorative strategies., Aim: To explore survival of extensive restorations in primary molars., Design: This study was based on health records from 2002 to 2016 of children under 18 years., Results: Of severely affected primary molars (n = 1061), 41% were restored with preformed metal crowns (PMCs), 38% with glass-ionomer cement (GIC)/polyacid-modified resin composite (PAMRC)/resin-modified GIC (RMGIC), and 21% with resin composites (RC). Younger children (3-8) received 97% of the PMCs and 86% of GIC/PAMRC/RMGIC; older ones (≥9) 91% of the RC restorations. Neither amalgam nor indirect restorations were registered. General dentists (GDs) engaged in primary care restored with GIC/PAMRC/RMGIC (52%) or RC (48%). GDs in general anesthesia care service placed 66% and specializing/specialized dentists 31% of PMCs. PMCs had lower failure rate (1.4% vs 3.0%) than GIC/PAMRC/RMGIC (P = 0.001). Choosing PMCs reduced patient visits compared to other restorations (P < 0.001)., Conclusions: Severely affected primary molars of children at high caries risk are better managed, using PMCs to optimize the resources in public oral health services., (© 2017 BSPD, IAPD and John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Purpose To show that equal coronary lumen opacification can be achieved with iso- and low-osmolar contrast media when it is injected at the same iodine delivery rate with contemporary cardiac computed tomographic (CT) protocols and to investigate the cardiovascular effect of iso-osmolar contrast media and the image quality achieved. Materials and Methods Institutional review board approval and written informed consent were obtained for the Effect of Iso-osmolar Contrast Medium on Coronary Opacification and Heart Rhythm in Coronary CT Angiography, or IsoCOR, trial. Between November 2015 and August 2016, 306 patients (167 [55%] women) at least 18 years old (weight range, 50-125 kg), were prospectively randomized to receive iso-osmolar iodixanol 270 or low-osmolar iopromide 300 contrast media. All coronary segments were assessed for intraluminal opacification and image quality and were compared by using the Student t test. Heart rate, arrhythmia, patient discomfort, and adverse events also were monitored. Results Mean measured coronary attenuation values ± standard deviation were comparable between the iodixanol 270 and iopromide 300 contrast media groups (469 HU ± 167 vs 447 HU ± 166, respectively [P = .241]; 95% confidence interval: -15.1, 60.0), including those from subanalyses. Adjusted for the lower iodine concentration, the mean iodixanol 270 bolus was larger compared with that of iopromide 300 (76.8 mL ± 11.6 vs 69.7 mL ± 10.8, respectively; P < .001). The higher injection rate was associated with higher pressure (777 kPa ± 308 vs 630 kPa ± 252, respectively; P < .001). Although in the iodixanol 270 group patients experienced less heat discomfort (72% vs 86%, respectively; P < .001), no differences in heart rate or rhythm were observed. Conclusion If injected at comparable iodine delivery rates, the iso-osmolar contrast medium iodixanol 270 is not inferior to low-osmolar contrast medium iopromide 300 for assessment of coronary opacification. Iodixanol 270 was associated with less heat discomfort, but did not affect heart rate differently compared with iopromide 300. © RSNA, 2017 Online supplemental material is available for this article.

Purpose: We present planning and early clinical outcomes of a study of intensity-modulated radiotherapy (IMRT) for locally advanced prostate cancer., Methods and Materials: A total of 43 patients initially treated with an IMRT plan delivering 50 Gy to the prostate, seminal vesicles, and pelvic lymph nodes, followed by a conformal radiotherapy (CRT) plan delivering 20 Gy to the prostate and seminal vesicles, were studied. Dose-volume histogram (DVH) data for the added plans were compared with dose-volume histogram data for the sum of two CRT plans for 15 cases. Gastrointestinal (GI) and genitourinary (GU) toxicity, based on the Radiation Therapy Oncology Group scoring system, was recorded weekly throughout treatment as well as 3 to 18 months after treatment and are presented., Results: Treatment with IMRT both reduced normal tissue doses and increased the minimum target doses. Intestine volumes receiving more than 40 and 50 Gy were significantly reduced (e.g., at 50 Gy, from 81 to 19 cm(3); p = 0.026), as were bladder volumes above 40, 50, and 60 Gy, rectum volumes above 30, 50, and 60 Gy, and hip joint muscle volumes above 20, 30, and 40 Gy. During treatment, Grade 2 GI toxicity was reported by 12 of 43 patients (28%), and Grade 2 to 4 GU toxicity was also observed among 12 patients (28%). With 6 to 18 months of follow-up, 2 patients (5%) experienced Grade 2 GI effects and 7 patients (16%) experienced Grade 2 GU effects., Conclusions: Use of IMRT for pelvic irradiation in prostate cancer reduces normal tissue doses, improves target coverage, and has a promising toxicity profile.

Radiotherapy patients will from time to time be treated on another linac than originally planned due to service or logistical challenges. For patients treated with dynamic intensity modulated radiotherapy (IMRT), extra care should be taken to make sure the delivered dose remains as planned. Four linacs with the same type of dynamic multileaf collimator (MLC) were compared to find a general prediction of the potential dosimetric error caused by treating IMRT patients on another linac without recalculating the treatment plan. The MLC parameters, transmission and dosimetric leaf separation (DLS) were measured for all four linacs. The dynamic fields that were measured to find the DLS value were imported into the treatment planning system to compare the calculated and measured doses. Measured values of transmission and DLS were used directly in the calculations to obtain dose differences of less than 1% between the calculated and measured doses at the reference setup. The dosimetric discrepancy between the linacs was acceptable for all but one linac. Recalculation of the treatment plan therefore remains as standard procedure for this linac when a planned patient must switch linac during the course of treatment. The depth and field size dependences of the MLC parameters were also tested, finding dose differences of up to 4%.

Purpose: Episcleral plaque therapy (EPT) is applied in the management of some malignant ocular tumors. A customized configuration of typically 4 to 20 radioactive seeds is fixed in a gold plaque, and the plaque is sutured to the scleral surface corresponding to the basis of the intraocular tumor, allowing for a localized radiation dose delivery to the tumor. Minimum target doses as high as 100 Gy are directed at malignant tumor sites close to critical normal tissues (e.g., optic disc and macula). Precise dosimetry is therefore fundamental for judging both the risk for normal tissue toxicity and tumor dose prescription. This paper describes the dosimetric verification of a commercially available dedicated treatment planning system (TPS) for EPT when realistic multiple-seed configurations are applied., Materials and Methods: The TPS Bebig Plaque Simulator is used to plan EPT at our institution. Relative dose distributions in a water phantom, including central axis depth dose and off-axis dose profiles for three different plaques, the University of Southern California (USC) #9 and the Collaborative Ocular Melanoma Study (COMS) 12-mm and 20-mm plaques, were measured with a diode detector. Each plaque was arranged with realistic multiple 125I seed configurations. The measured dose distributions were compared to the corresponding dose profiles calculated with the TPS. All measurements were corrected for the angular sensitivity variation of the diode., Results: Single-seed dose distributions measured with our dosimetry setup agreed with previously published data within 3%. For the three multiple-seed plaque configurations, the measured and calculated dose distributions were in good agreement. For the central axis depth doses, the agreement was within 4%, whereas deviations up to 11% were observed in single points far off-axis., Conclusions: The Bebig Plaque Simulator is a reliable TPS for calculating relative dose distributions around realistic multiple 125I seed configurations in EPT.

To increase dose homogeneity within certain radiotherapy targets, we defined a partially wedged radiation beam as a beam with wedge modification in one part of the field only. Partially wedged beams may be beneficial in cases with curved surfaces inside parts of the beam only, where they may compensate for missing tissue and/or for variations in depth to the target region. Possible sites suitable for partially wedged beams include urinary bladder and tangential breast irradiation. Customized partially wedged beams were delivered applying dynamic collimation techniques. Two different linear detector arrays, a semiconductor diode array and an ionization chamber array, were used independently in the same standard water tank to verify that the partially wedged beams were delivered according to the definition. Dose calculations of partial wedge fields were implemented in our treatment planning system and compared with the measured dose distributions. We re-planned a representative treatment plan for both advanced urinary bladder cancer and tangential breast irradiation using partially wedged beams. For both patients the target dose homogeneity was improved, and the doses to surrounding critical normal tissues were reduced.

The effects of radiation on direction on directional migration in monolayer cultures and brain tissue invasion by two glioblastoma cell lines (D-54 MG, D-247 MG) were investigated. The Leksell Gamma Unit was the radiation source and invasion was registered in an in vitro invasion assay developed in our laboratory. As tumor spheroids and brain tissue aggregates were treated simultaneously in cocultures; the effects of radiation on the interaction between the two tissues could be investigated. Tumor spheroids from both cell lines retained their ability to invade and destroy normal brain tissue, even after irradiation with 47.6 Gy. However, while the D-54 MG tumor spheroids showed a dose-dependent reduction of invasion, tumor spheroids from the D-247 MG cell line did not. In addition, radiation produced a dose dependent inhibition of directional migration of cells from D-54 MG spheroids. A similar significant inhibition of directional migration was found in D-247 MG, but it was not dose-dependent. Transmission electron microscopy revealed a loosening of the neuropil in the brain tissue of irradiated cocultures. However, this structural change did not seem to affect the invasiveness of the tumor. In this preliminary study, irradiation could not prevent invasion of two different glioblastoma cell lines into fetal rat brain tissue. Further studies using the same technique may help to understand the influence of ionizing radiation upon the invasion process in gliomas.