Search

We investigate the formation and magnetic topology of four flare/CME events with filament-sigmoid systems, in which the sigmoidal hot channels are located above the filaments, and they appear in pairs prior to eruption.} The formation of hot channels usually takes several to dozens of hours during which two J-shape sheared arcades gradually evolve into sigmoidal hot channels, then they keep stable for tens of minutes or hours and erupt. While the low-lying filaments show no significant change. \textbf{We construct a series of magnetic field models and find that the best-fit preflare models contain magnetic flux ropes with hyperbolic flux tubes (HFTs). The field lines above the HFT correspond to the high-lying hot channel, while those below the HFT surround the underlying filaments. In particular, the continuous and long field lines representing the flux rope located above the HFT match the observed hot channels well in three events. While for SOL2014-04-18 event, the flux bundle that mimics the observed hot channel is located above the flux rope. The flux rope axis lies in a height range of 19.8 Mm and 46 Mm above the photosphere for the four events, among which the flux rope axis in SOL2012-07-12 event has a maximum height, which probably explains why it is often considered as a double-decker structure. Our modeling suggests that the high-lying hot channel may be formed by magnetic reconnections between sheared field lines occurring above the filament prior to eruption., Comment: ApJ accepted

We investigate two sympathetic filament eruptions observed by the New Vacuum Solar Telescope (NVST) on 2015 October 15. The full picture of the eruptions is obtained from the corresponding SDO/AIA observations. The two filaments start from active region NOAA 12434 in the north and end in one large quiescent filament channel in the south. The left filament erupts firstly, followed by the right filament eruption about 10 minutes later. Clear twist structure and rotating motion are observed in both filaments during the eruption. Both eruptions are failed, since the filaments firstly rise up, then flow towards the south and merge into the southern large quiescent filament. We also observe repeating activations of mini filaments below the right filament after its eruption. Using magnetic field models constructed based on SDO/HMI magnetograms by flux rope insertion method, we find that the left filament eruption is likely to be triggered by kink instability, while weakening of overlying magnetic fields due to magnetic reconnection at an X-point between the two filament systems might play an important role in the onset of the right filament eruption.

In this paper we further develop a model for the heating of coronal loops by Alfven wave turbulence (AWT). The Alfven waves are assumed to be launched from a collection of kilogauss flux tubes in the photosphere at the two ends of the loop. Using a three-dimensional magneto-hydrodynamic (MHD) model for an active-region loop, we investigate how the waves from neighboring flux tubes interact in the chromosphere and corona. For a particular combination of model parameters we find that AWT can produce enough heat to maintain a peak temperature of about 2.5 MK, somewhat lower than the temperatures of 3-4 MK observed in the cores of active regions. The heating rates vary strongly in space and time, but the simulated heating events have durations less than 1 minute and are unlikely to reproduce the observed broad Differential Emission Measure distributions of active regions. The simulated spectral line non-thermal widths are predicted to be about 27 km/s, which is high compared to the observed values. Therefore, the present AWT model does not satisfy the observational constraints. An alternative "magnetic braiding" model is considered in which the coronal field lines are subject to slow random footpoint motions, but we find that such long period motions produce much less heating than the shorter period waves launched within the flux tubes. We discuss several possibilities for resolving the problem of producing sufficiently hot loops in active regions.

Alfv\'{e}n waves are believed to play an important role in the heating and acceleration of the fast solar wind emanating from coronal holes. Nonlinear interactions between the dominant ${\bf z}_{+}$ waves and minority ${\bf z}_{-}$ waves have the potential to transfer wave energy either to smaller perpendicular scales ("direct cascade") or to larger scales ("inverse cascade"). In this paper we use reduced magnetohydrodynamic (RMHD) simulations to investigate how the cascade rates $\epsilon_{\pm}$ depend on perpendicular wavenumber and radial distance from Sun center. For models with a smooth background atmosphere we find that an inverse cascade ($\epsilon_{+} < 0$) occurs for the dominant waves at radii between 1.4 and 2.5 $R_\odot$ and dimensionless wavenumbers in the inertial range ($15 < a_\perp < 44$), and a direct cascade ($\epsilon_{+} > 0$) occurs elsewhere. For a model with density fluctuations there are multiple regions with inverse cascade. In both cases the cascade rate $\epsilon_{+}$ varies significantly with perpendicular wavenumber, indicating that the cacsade is a highly non-local process. As a result of the inverse cascades, the enery dissipation rates are much lower than expected from a phenomenological model, and are insufficient to maintain the temperature of the background atmosphere. We conclude that RMHD models are unable to reproduce the observed properties of the fast solar wind.

We present an investigation of the polar crown prominence that erupted on 2012 March 12. This prominence is observed at the southeast limb by SDO/AIA (end-on view) and displays a quasi vertical-thread structure. Bright U-shape/horn-like structure is observed surrounding the upper portion of the prominence at 171 angstrom before the eruption and becomes more prominent during the eruption. The disk view of STEREO-B shows that this long prominence is composed of a series of vertical threads and displays a half loop-like structure during the eruption. We focus on the magnetic support of the prominence vertical threads by studying the structure and dynamics of the prominence before and during the eruption using observations from SDO and STEREO-B. We also construct a series of magnetic field models (sheared arcade model, twisted flux rope model, and unstable model with hyperbolic flux tube (HFT)). Various observational characteristics appear to be in favor of the twisted flux rope model. We find that the flux rope supporting the prominence enters the regime of torus instability at the onset of the fast rise phase, and signatures of reconnection (post-eruption arcade, new U-shape structure, rising blobs) appear about one hour later. During the eruption, AIA observes dark ribbons seen in absorption at 171 angstrom corresponding to the bright ribbons shown at 304 angstrom, which might be caused by the erupting filament material falling back along the newly reconfigured magnetic fields. Brightenings at the inner edge of the erupting prominence arcade are also observed in all AIA EUV channels, which might be caused by the heating due to energy released from reconnection below the rising prominence., Comment: 2015, ApJ, accepted

The dense prominence material is believed to be supported against gravity through the magnetic tension of dipped coronal magnetic field. For quiescent prominences, which exhibit many gravity-driven flows, hydrodynamic forces are likely to play an important role in the determination of both the large and small scale magnetic field distributions. In this study, we present the first steps toward creating three-dimensional magneto-hydrostatic prominence model where the prominence is formed in the dips of a coronal flux tube. Here 2.5D equilibria are created by adding mass to an initially force-free magnetic field, then performing a secondary magnetohydrodynamic relaxation. Two inverse polarity magnetic field configurations are studied in detail, a simple o-point configuration with a ratio of the horizontal field (B_x) to the axial field (B_y) of 1:2 and a more complex model that also has an x-point with a ratio of 1:11. The models show that support against gravity is either by total pressure or tension, with only tension support resembling observed quiescent prominences. The o-point of the coronal flux tube was pulled down by the prominence material, leading to compression of the magnetic field at the base of the prominence. Therefore tension support comes from the small curvature of the compressed magnetic field at the bottom and the larger curvature of the stretched magnetic field at the top of the prominence. It was found that this method does not guarantee convergence to a prominence-like equilibrium in the case where an x-point exists below the prominence flux tube. The results imply that a plasma beta of ~ 0.1 is necessary to support prominences through magnetic tension., Comment: 38 Pages, 24 Figures, Published in ApJ

The solar wind is connected to the Sun's atmosphere by flux tubes that are rooted in an ever-changing pattern of positive and negative magnetic polarities on the surface. Observations indicate that the magnetic field is filamentary and intermittent across a wide range of spatial scales. However, we do not know to what extent the complex flux tube topology seen near the Sun survives as the wind expands into interplanetary space. In order to study the possible long-distance connections between the corona and the heliosphere, we developed new models of turbulence-driven solar wind acceleration along empirically constrained field lines. We used a potential-field model of the Quiet Sun to trace field lines into the ecliptic plane with unprecedented spatial resolution at their footpoints. For each flux tube, a one-dimensional model was created with an existing wave/turbulence code that solves equations of mass, momentum, and energy conservation from the photosphere to 4 AU. To take account of stream-stream interactions between flux tubes, we used those models as inner boundary conditions for a time-steady MHD description of radial and longitudinal structure in the ecliptic. Corotating stream interactions smear out much of the smallest-scale variability, making it difficult to see how individual flux tubes on granular or supergranular scales can survive out to 1 AU. However, our models help clarify the level of "background" variability with which waves and turbulent eddies should be expected to interact. Also, the modeled fluctuations in magnetic field magnitude were seen to match measured power spectra quite well., Comment: Accepted for publication in the Astrophysical Journal. 18 pages (emulateapj style), 17 figures

A large polar-crown prominence composed of different segments spanning nearly the entire solar disk erupted on 2010 December 6. Prior to the eruption, the filament in the active region part splits into two layers: a lower layer and an elevated layer. The eruption occurs in several episodes. Around 14:12 UT, the lower layer of the active region filament breaks apart, one part ejects towards the west, while the other part ejects towards the east, which leads to the explosive eruption of the eastern quiescent filament. During the early rise phase, part of the quiescent filament sheet displays strong rolling motion (observed by STEREO$\_$B) in the clockwise direction (views from east to west) around the filament axis. This rolling motion appears to start from the border of the active region, then propagates towards the east. AIA observes another type of rotating motion: in some other parts of the erupting quiescent prominence the vertical threads turn horizontal, then turn upside down. The elevated active region filament does not erupt until 18:00 UT, when the erupting quiescent filament already reaches a very large height. We develop two simplified three-dimensional models which qualitatively reproduce the observed rolling and rotating motions. The prominence in the models is assumed to consist of a collection of discrete blobs that are tied to particular field lines of a helical flux rope. The observed rolling motion is reproduced by continuous twist injection into the flux rope in Model 1 from the active region side. Asymmetric reconnection induced by the asymmetric distribution of the magnetic fields on the two sides of the filament may cause the observed rolling motion. The rotating motion of the prominence threads observed by AIA is consistent with the removal of the field line dips in Model 2 from the top down during the eruption., Comment: 2012, ApJ, submitted

We present a study on the structure of quiescent filament channels observed by Hinode/XRT and STEREO/EUVI from December 2006 to February 2009. For 10 channels identified on the solar disk, we find that the emission on the two sides of the channel is asymmetric in both X-rays and EUV: one side has curved bright features while the other side has straight faint features. We interpret the results in terms of a magnetic flux rope model. The asymmetry in the emission is due to the variation in axial magnetic flux along the channel, which causes one polarity to turn into the flux rope, while the field lines from the other polarity are open or connected to very distant sources. For 70 channels identified by cavities at the limb, the asymmetry cannot be clearly identified., Comment: 2012, Hinode-3 proceeding, in press

We present observations and magnetic field modeling of the large polar crown prominence that erupted on 2010 December 6. Combination of SDO/AIA and STEREO$\_$Behind/EUVI allows us to see the fine structures of this prominence both at the limb and on the disk. We focus on the structures and dynamics of this prominence before the eruption. This prominence contains two parts: an active region part containing mainly horizontal threads, and a quiet Sun part containing mainly vertical threads. On the northern side of the prominence channel, both AIA and EUVI observe bright features which appear to be the lower legs of loops that go above then join in the filament. Filament materials are observed to frequently eject horizontally from the active region part to the quiet Sun part. This ejection results in the formation of a dense-column structure (concentration of dark vertical threads) near the border between the active region and the quiet Sun. Using the flux rope insertion method, we create non-linear force-free field models based on SDO/HMI line-of-sight magnetograms. A key feature of these models is that the flux rope has connections with the surroundings photosphere, so its axial flux varies along the filament path. The height and location of the dips of field lines in our models roughly replicate those of the observed prominence. Comparison between model and observations suggests that the bright features on the northern side of the channel are the lower legs of the field lines that turn into the flux rope. We suggest that plasma may be injected into the prominence along these field lines. Although the models fit the observations quiet well, there are also some interesting differences. For example, the models do not reproduce the observed vertical threads and cannot explain the formation of the dense-column structure., Comment: 2012, ApJ, in press. arXiv admin note: text overlap with arXiv:1001.1635 by other authors

In the parts of the solar corona and solar wind that experience the fewest Coulomb collisions, the component proton, electron, and heavy ion populations are not in thermal equilibrium with one another. Observed differences in temperatures, outflow speeds, and velocity distribution anisotropies are useful constraints on proposed explanations for how the plasma is heated and accelerated. This paper presents new predictions of the rates of collisionless heating for each particle species, in which the energy input is assumed to come from magnetohydrodynamic (MHD) turbulence. We first created an empirical description of the radial evolution of Alfven, fast-mode, and slow-mode MHD waves. This model provides the total wave power in each mode as a function of distance along an expanding flux tube in the high-speed solar wind. Next we solved a set of cascade advection-diffusion equations that give the time-steady wavenumber spectra at each distance. An approximate term for nonlinear coupling between the Alfven and fast-mode fluctuations is included. For reasonable choices of the parameters, our model contains enough energy transfer from the fast mode to the Alfven mode to excite the high-frequency ion cyclotron resonance. This resonance is efficient at heating protons and other ions in the direction perpendicular to the background magnetic field, and our model predicts heating rates for these species that agree well with both spectroscopic and in situ measurements. Nonetheless, the high-frequency waves comprise only a small part of the total Alfvenic fluctuation spectrum, which remains highly two-dimensional as is observed in interplanetary space., Comment: Accepted for publication in the Astrophysical Journal. 30 pages (emulateapj style), 18 figures

This paper describes a new 2D model for the photospheric evolution of the magnetic carpet. It is the first in a series of papers working towards constructing a realistic 3D non-potential model for the interaction of small-scale solar magnetic fields. In the model, the basic evolution of the magnetic elements is governed by a supergranular flow profile. In addition, magnetic elements may evolve through the processes of emergence, cancellation, coalescence and fragmentation. Model parameters for the emergence of bipoles are based upon the results of observational studies. Using this model, several simulations are considered, where the range of flux with which bipoles may emerge is varied. In all cases the model quickly reaches a steady state where the rates of emergence and cancellation balance. Analysis of the resulting magnetic field shows that we reproduce observed quantities such as the flux distribution, mean field, cancellation rates, photospheric recycle time and a magnetic network. As expected, the simulation matches observations more closely when a larger, and consequently more realistic, range of emerging flux values is allowed (4e16 - 1e19 Mx). The model best reproduces the current observed properties of the magnetic carpet when we take the minimum absolute flux for emerging bipoles to be 4e16 Mx. In future, this 2D model will be used as an evolving photospheric boundary condition for 3D non-potential modeling., Comment: 33 pages, 16 figures, 5 gif movies included: movies may be viewed at http://www-solar.mcs.st-and.ac.uk/~karen/movies_paper1/

The physical processes that heat the solar corona and accelerate the solar wind remain unknown after many years of study. Some have suggested that the wind is driven by waves and turbulence in open magnetic flux tubes, and others have suggested that plasma is injected into the open tubes by magnetic reconnection with closed loops. In order to test the latter idea, we developed Monte Carlo simulations of the photospheric "magnetic carpet" and extrapolated the time-varying coronal field. These models were constructed for a range of different magnetic flux imbalance ratios. Completely balanced models represent quiet regions on the Sun and source regions of slow solar wind streams. Highly imbalanced models represent coronal holes and source regions of fast wind streams. The models agree with observed emergence rates, surface flux densities, and number distributions of magnetic elements. Despite having no imposed supergranular motions, a realistic network of magnetic "funnels" appeared spontaneously. We computed the rate at which closed field lines open up (i.e., recycling times for open flux), and we estimated the energy flux released in reconnection events involving the opening up of closed flux tubes. For quiet regions and mixed-polarity coronal holes, these energy fluxes were found to be much lower than required to accelerate the solar wind. For the most imbalanced coronal holes, the energy fluxes may be large enough to power the solar wind, but the recycling times are far longer than the time it takes the solar wind to accelerate into the low corona. Thus, it is unlikely that either the slow or fast solar wind is driven by reconnection and loop-opening processes in the magnetic carpet., Comment: 25 pages (emulateapj style), 13 figures, ApJ, in press

This paper reviews our growing understanding of the physics behind coronal heating (in open-field regions) and the acceleration of the solar wind. Many new insights have come from the last solar cycle's worth of observations and theoretical work. Measurements of the plasma properties in the extended corona, where the primary solar wind acceleration occurs, have been key to discriminating between competing theories. We describe how UVCS/SOHO measurements of coronal holes and streamers over the last 14 years have provided clues about the detailed kinetic processes that energize both fast and slow wind regions. We also present a brief survey of current ideas involving the coronal source regions of fast and slow wind streams, and how these change over the solar cycle. These source regions are discussed in the context of recent theoretical models (based on Alfven waves and MHD turbulence) that have begun to successfully predict both the heating and acceleration in fast and slow wind regions with essentially no free parameters. Some new results regarding these models - including a quantitative prediction of the lower density and temperature at 1 AU seen during the present solar minimum in comparison to the prior minimum - are also shown., Comment: 8 pages (ASP style), 2 figures, in press for the proceedings of "SOHO-23: Understanding a Peculiar Solar Minimum."

We present a series of models for the plasma properties along open magnetic flux tubes rooted in solar coronal holes, streamers, and active regions. These models represent the first self-consistent solutions that combine: (1) chromospheric heating driven by an empirically guided acoustic wave spectrum, (2) coronal heating from Alfven waves that have been partially reflected, then damped by anisotropic turbulent cascade, and (3) solar wind acceleration from gradients of gas pressure, acoustic wave pressure, and Alfven wave pressure. The only input parameters are the photospheric lower boundary conditions for the waves and the radial dependence of the background magnetic field along the flux tube. For a single choice for the photospheric wave properties, our models produce a realistic range of slow and fast solar wind conditions by varying only the coronal magnetic field. Specifically, a 2D model of coronal holes and streamers at solar minimum reproduces the latitudinal bifurcation of slow and fast streams seen by Ulysses. The radial gradient of the Alfven speed affects where the waves are reflected and damped, and thus whether energy is deposited below or above the Parker critical point. As predicted by earlier studies, a larger coronal ``expansion factor'' gives rise to a slower and denser wind, higher temperature at the coronal base, less intense Alfven waves at 1 AU, and correlative trends for commonly measured ratios of ion charge states and FIP-sensitive abundances that are in general agreement with observations. These models offer supporting evidence for the idea that coronal heating and solar wind acceleration (in open magnetic flux tubes) can occur as a result of wave dissipation and turbulent cascade. (abridged abstract), Comment: 32 pages (emulateapj style), 18 figures, ApJ Supplement, in press (v. 171, August 2007)

We probe the relationship between surface magnetic fields and the X-ray emitting corona in the rapidly rotating star AB Dor. Circularly polarised spectra have been inverted to produce a surface (photospheric) magnetic field map. This surface map has been extrapolated to model AB Dor's coronal field topology and X-ray light curve. Chandra/LETG light curves of AB Dor from the same epoch show intrinsic variability at the 30% level. Period analysis indicates a fraction of this is due to rotational modulation. We measure velocity shifts in emission line centroids as a function of rotation period and find evidence of rotational modulation (max. vel. ~40+/- 13km/s). This modulation may indicate the presence of a localised X-ray emitting region at mid-to-high latitudes., Comment: 6 pages, Conference proceedings: IAU Symposium 219. Stars as Suns: Activity, Evolution, Planets, eds. A.K. Dupree & A.O. Benz, (San Francisco: ASP) in press

A semi-empirical, axisymmetric model of the solar minimum corona is developed by solving the equations for conservation of mass and momentum with prescribed anisotropic temperature distributions. In the high-latitude regions, the proton temperature anisotropy is strong and the associated mirror force plays an important role in driving the fast solar wind; the critical point where the outflow velocity equals the parallel sound speed is reached already at 1.5 Rsun from Sun center. The slow wind arises from a region with open field lines and weak anisotropy surrounding the equatorial streamer belt. The model parameters were chosen to reproduce the observed latitudinal extent of the equatorial streamer in the corona and at large distance from the Sun. We find that the magnetic cusp of the closed-field streamer core lies at about 1.95 Rsun. The transition from fast to slow wind is due to a decrease in temperature anisotropy combined with the non-monotonic behavior of the non-radial expansion factor in flow tubes that pass near the streamer cusp. In the slow wind, the plasma beta is of order unity and the critical point lies at about 5 Rsun, well beyond the magnetic cusp. The predicted outflow velocities are consistent with OVI Doppler dimming measurements from UVCS/SOHO. We also find good agreement with polarized brightness (pB) measurements from LASCO/SOHO and HI Ly-alpha images from UVCS/SOHO., Comment: 36 pages, 13 figures. AAS LaTeX Macros v5.0. To appear in The Astrophysical Journal, Vol. 598, No. 2, Issue December 1, 2003