Search

This paper presents a first comprehensive analysis of long-term measurements of atmospheric aerosol components from aerosol chemical speciation monitor (ACSM) and multiwavelength Aethalometer (AE33) instruments collected between 2015 and 2021 at 13 (sub)urban sites as part of the French CARA (Chemical Characterization of Particles) program. The datasets contain the mass concentrations of major chemical species within submicron aerosols (PM1), namely organic aerosols (OAs), nitrate (NO3-), ammonium (NH4+), sulfate (SO42-), non-sea-salt chloride (Cl−), and equivalent black carbon (eBC). Rigorous quality control, technical validation, and environmental evaluation processes were applied, adhering to both guidance from the French Reference Laboratory for Air Quality Monitoring (LCSQA) and the Aerosol, Clouds, and Trace Gases Research Infrastructure (ACTRIS) standard operating procedures. Key findings include geographical differences in the aerosol chemical composition, seasonal variations, and diel patterns, which are influenced by meteorological conditions, anthropogenic activities, and proximity to emission sources. Overall, OA dominates PM1 at each site (43 %–60 % of total mass), showing distinct seasonality with higher concentrations (i) in winter, due to enhanced residential heating emissions, and (ii) in summer, due to increased photochemistry favoring secondary aerosol formation. NO3 is the second most important contributor to PM1 (15 %–30 %), peaking in late winter and early spring, especially in northern France, and playing a significant role during pollution episodes. SO4 (8 %–14 %) and eBC (5 %–11 %) complement the major fine-aerosol species, with their relative contributions strongly influenced by the origin of air masses and the stability of meteorological conditions, respectively. A comparison with the 3D chemical transport model (CTM) CHIMERE shows high correlations between simulations and measurements, albeit with an OA concentration underestimation of 46 %–76 %. Regional discrepancies in NO3 concentration levels emphasize the importance of these datasets with respect to validating air quality models and tailoring air pollution mitigation strategies. The datasets can be found at https://doi.org/10.5281/zenodo.13318298 (Chebaicheb et al., 2024).

Understanding the lifecycle of light-absorbing carbonaceous aerosols, from emission to deposition, is critical for assessing their climate impact. This study integrated multi-year aerosol observations from the ATOLL (ATmospheric Observations in liLLe, northern France) platform, with air mass back trajectories and emission inventory as a newly developed “INTERPLAY” (IN-siTu obsERvations, hysPLit, And emission inventorY) approach. Applied to black carbon (BC), the method apportioned source contributions (shipping, vehicular, residential heating, industrial) and studied aerosol aging effects, notably on the brown carbon (BrC) component. Results estimate that, throughout the year, vehicular traffic dominated BC (31 %), followed by shipping (25 %, of which one-third was from canals/rivers) and residential heating (21 %). Comparing INTERPLAY results with the aethalometer model highlights that the “residential sector” BC can be entirely apportioned to BC from wood burning (BCwb), notably in winter, while vehicular traffic corresponds to only about 41 % of BC fossil fuel (BCff) at the ATOLL site, the rest being apportioned to shipping (33 %) and industrial (23 %) emissions. Thus, vehicular traffic and BCff should not be used interchangeably, particularly in regions near intense maritime traffic. Concerning BrC, our analysis confirms a dominant role of residential heating. Focusing on winter, results suggest a considerable decrease in the BrC component only 24 h after emission, with fresh residential emissions being responsible for 72 % of BrC absorption at ATOLL. The results from this study allow for an improved understanding of sources and atmospheric dynamics of light-absorbing carbonaceous aerosols in northern France, being crucial for both source abatement strategies as well as a better assessment of their climate impact.

To fight against the first wave of coronavirus disease 2019 (COVID-19) in 2020, lockdown measures were implemented in most European countries. These lockdowns had well-documented effects on human mobility. We assessed the impact of the lockdown implementation and relaxation on air pollution by comparing daily particulate matter (PM), nitrogen dioxide (NO2) and ozone (O3) concentrations, as well as particle number size distributions (PNSDs) and particle light absorption coefficient in situ measurement data, with values that would have been expected if no COVID-19 epidemic had occurred at 28 sites across Europe for the period 17 February–31 May 2020. Expected PM, NO2 and O3 concentrations were calculated from the 2020 Copernicus Atmosphere Monitoring Service (CAMS) ensemble forecasts, combined with 2019 CAMS ensemble forecasts and measurement data. On average, lockdown implementations did not lead to a decrease in PM2.5 mass concentrations at urban sites, while relaxations resulted in a +26 ± 21 % rebound. The impacts of lockdown implementation and relaxation on NO2 concentrations were more consistent (−29 ± 17 and +31 ± 30 %, respectively). The implementation of the lockdown measures also induced statistically significant increases in O3 concentrations at half of all sites (+13 % on average). An enhanced oxidising capacity of the atmosphere could have boosted the production of secondary aerosol at those places. By comparison with 2017–2019 measurement data, a significant change in the relative contributions of wood and fossil fuel burning to the concentration of black carbon during the lockdown was detected at 7 out of 14 sites. The contribution of particles smaller than 70 nm to the total number of particles significantly also changed at most of the urban sites, with a mean decrease of −7 ± 5 % coinciding with the lockdown implementation. Our study shows that the response of PM2.5 and PM10 mass concentrations to lockdown measures was not systematic at various sites across Europe for multiple reasons, the relationship between road traffic intensity and particulate air pollution being more complex than expected.

Formation of ultrafine particles (UFPs) in the urban atmosphere is expected to be less favored than in the rural atmosphere due to the high existing particle surface area acting as a sink for newly formed particles. Despite large condensation sink (CS) values, previous comparative studies between rural and urban sites reported higher frequency of new particle formation (NPF) events over urban sites in comparison to background sites as well as higher particle formation and growth rates attributed to the higher concentration of condensable species. The present study aims at a better understanding the environmental factors favoring, or disfavoring, atmospheric NPF over Lille, a large city in the north of France, and to analyze their impact on particle number concentration using a 4-year long-term dataset. The results highlight a strong seasonal variation of NPF occurrences with a maximum frequency observed during spring (27 events) and summer (53 events). It was found that high temperature (T>295 K), low relative humidity (RH %), and high solar radiation are ideal to observe NPF events over Lille. Relatively high CS values (i.e., ∼2×10-2 s−1) are reported during event days suggesting that high CS does not inhibit the occurrence of NPF over the ATmospheric Observations in LiLLE (ATOLL) station. Moreover, the particle growth rate was positively correlated with temperatures most probably due to higher emission of precursors. Finally, the nucleation strength factor (NSF) was calculated to highlight the impact of those NPF events on particle number concentrations. NSF reached a maximum of four in summer, evidencing a huge contribution of NPF events to particle number concentration at this time of the year.

Particulate matter (PM) has become a major concern in terms of human health and climate impact. In particular, the source apportionment (SA) of organic aerosols (OA) present in submicron particles (PM1) has gained relevance as an atmospheric research field due to the diversity and complexity of its primary sources and secondary formation processes. Moreover, relatively simple but robust instruments such as the Aerosol Chemical Speciation Monitor (ACSM) are now widely available for the near-real-time online determination of the composition of the non-refractory PM1. One of the most used tools for SA purposes is the source-receptor positive matrix factorisation (PMF) model. Even though the recently developed rolling PMF technique has already been used for OA SA on ACSM datasets, no study has assessed its added value compared to the more common seasonal PMF method using a practical approach yet. In this paper, both techniques were applied to a synthetic dataset and to nine European ACSM datasets in order to spot the main output discrepancies between methods. The main advantage of the synthetic dataset approach was that the methods' outputs could be compared to the expected “true” values, i.e. the original synthetic dataset values. This approach revealed similar apportionment results amongst methods, although the rolling PMF profile's adaptability feature proved to be advantageous, as it generated output profiles that moved nearer to the truth points. Nevertheless, these results highlighted the impact of the profile anchor on the solution, as the use of a different anchor with respect to the truth led to significantly different results in both methods. In the multi-site study, while differences were generally not significant when considering year-long periods, their importance grew towards shorter time spans, as in intra-month or intra-day cycles. As far as correlation with external measurements is concerned, rolling PMF performed better than seasonal PMF globally for the ambient datasets investigated here, especially in periods between seasons. The results of this multi-site comparison coincide with the synthetic dataset in terms of rolling–seasonal similarity and rolling PMF reporting moderate improvements. Altogether, the results of this study provide solid evidence of the robustness of both methods and of the overall efficiency of the recently proposed rolling PMF approach.

Seasonal variability of non-refractory PM1 (NR-PM1) was studied at a rural background site (National Atmospheric Observatory Košetice – NAOK) in the Czech Republic to investigate the effect of regional and long-range atmospheric transport in central Europe. NR-PM1 measurements were performed by compact time-of-flight aerosol mass spectrometry (C-ToF-AMS), and the chemically speciated mass size distributions, density, shape, and origin were discussed. Average PM1 concentrations, calculated as the sum of the NR-PM1 and the equivalent black carbon (eBC) concentrations measured by an aethalometer (AE), were 8.58 ± 3.70 µg m−3 in summer and 10.08 ± 8.04 µg m−3 in winter. Organics were dominant during both campaigns (summer/winter: 4.97 ± 2.92/4.55 ± 4.40 µg m−3), followed by SO42-in summer (1.68 ± 0.81/1.36 ± 1.38 µg m−3) and NO3- in winter (0.67 ± 0.38/2.03 ± 1.71 µg m−3). The accumulation mode dominated the average mass size distribution during both seasons, with larger particles of all species measured in winter (mode diameters: Org: 334/413 nm, NO3-: 377/501 nm, SO42-: 400/547 nm, and NH4+: 489/515 nm) indicating regional and long-range transport. However, since the winter aerosols were less oxidized than the summer aerosols (comparing fragments f44 and f43), the importance of local sources in the cold part of the year was still enough to be considered. Although aged continental air masses from the south-east (SE) were rare in summer (7 %), they were related to the highest concentrations of PM1, eBC, and all NR-PM1 species, especially SO42- and NH4+. In winter, slow continental air masses from the south-west (SW) (44 %) were linked to inversion conditions over central Europe and were associated with the highest concentrations among all NR-PM1 species as well as PM1 and eBC. Average PM1 material density (ρm) corresponded to higher inorganic contents in both seasons (summer: ∼ 1.30 g cm−3 and winter: ∼ 1.40 g cm−3). During episodes of higher mass concentrations ρm ranged from 1.30–1.40 g cm−3 in summer and from 1.30–1.50 g cm−3 in winter. The dynamic shape factors (χ) decreased slightly with particle mobility diameter (Dm) in both seasons. This study provides insights into the seasonal effects and air mass variability on aerosol particles, focusing on episodes of high mass and number concentrations measured at a central European rural background site.

Aerosolized black carbon is monitored worldwide to quantify its impact on air quality and climate. Given its importance, measurements of black carbon mass concentrations must be conducted with instruments operating in quality-checked and ensured conditions to generate data which are reliable and comparable temporally and geographically. In this study, we report the results from the largest characterization and intercomparison of filter-based absorption photometers, the Aethalometer model AE33, belonging to several European monitoring networks. Under controlled laboratory conditions, a total of 23 instruments measured mass concentrations of black carbon from three well-characterized aerosol sources: synthetic soot, nigrosin particles, and ambient air from the urban background of Leipzig, Germany. The objective was to investigate the individual performance of the instruments and their comparability; we analyzed the response of the instruments to the different aerosol sources and the impact caused by the use of obsolete filter materials and the application of maintenance activities. Differences in the instrument-to-instrument variabilities from equivalent black carbon (eBC) concentrations reported at 880 nm were determined before maintenance activities (for soot measurements, average deviation from total least square regression was −2.0 % and the range −16 % to 7 %; for nigrosin measurements, average deviation was 0.4 % and the range −15 % to 17 %), and after they were carried out (for soot measurements, average deviation was −1.0 % and the range −14 % to 8 %; for nigrosin measurements, the average deviation was 0.5 % and the range −12 % to 15 %). The deviations are in most of the cases explained by the type of filter material employed by the instruments, the total particle load on the filter, and the flow calibration. The results of this intercomparison activity show that relatively small unit-to-unit variability of AE33-based particle light absorbing measurements is possible with well-maintained instruments. It is crucial to follow the guidelines for maintenance activities and the use of the proper filter tape in the AE33 to ensure high quality and comparable black carbon (BC) measurements among international observational networks.

Here we report results of a detailed analysis of the urban and non-urban contributions to particulate matter (PM) concentrations and source contributions in five European cities, namely Schiedam (the Netherlands, NL), Lens (France, FR), Leipzig (Germany, DE), Zurich (Switzerland, CH) and Barcelona (Spain, ES). PM chemically speciated data from 12 European paired monitoring sites (one traffic, five urban, five regional and one continental background) were analysed by positive matrix factorisation (PMF) and Lenschow's approach to assign measured PM and source contributions to the different spatial levels. Five common sources were obtained at the 12 sites: sulfate-rich (SSA) and nitrate-rich (NSA) aerosols, road traffic (RT), mineral matter (MM), and aged sea salt (SS). These sources explained from 55 % to 88 % of PM mass at urban low-traffic-impact sites (UB) depending on the country. Three additional common sources were identified at a subset of sites/countries, namely biomass burning (BB) (FR, CH and DE), explaining an additional 9 %–13 % of PM mass, and residual oil combustion (V–Ni) and primary industrial (IND) (NL and ES), together explaining an additional 11 %–15 % of PM mass. In all countries, the majority of PM measured at UB sites was of a regional+continental (R+C) nature (64 %–74 %). The R+C PM increments due to anthropogenic emissions in DE, NL, CH, ES and FR represented around 66 %, 62 %, 52 %, 32 % and 23 %, respectively, of UB PM mass. Overall, the R+C PM increments due to natural and anthropogenic sources showed opposite seasonal profiles with the former increasing in summer and the latter increasing in winter, even if exceptions were observed. In ES, the anthropogenic R+C PM increment was higher in summer due to high contributions from regional SSA and V–Ni sources, both being mostly related to maritime shipping emissions at the Spanish sites. Conversely, in the other countries, higher anthropogenic R+C PM increments in winter were mostly due to high contributions from NSA and BB regional sources during the cold season. On annual average, the sources showing higher R+C increments were SSA (77 %–91 % of SSA source contribution at the urban level), NSA (51 %–94 %), MM (58 %–80 %), BB (42 %–78 %) and IND (91 % in NL). Other sources showing high R+C increments were photochemistry and coal combustion (97 %–99 %; identified only in DE). The highest regional SSA increment was observed in ES, especially in summer, and was related to ship emissions, enhanced photochemistry and peculiar meteorological patterns of the Western Mediterranean. The highest R+C and urban NSA increments were observed in NL and associated with high availability of precursors such as NOx and NH3. Conversely, on average, the sources showing higher local increments were RT (62 %–90 % at all sites) and V–Ni (65 %–80 % in ES and NL). The relationship between SSA and V–Ni indicated that the contribution of ship emissions to the local sulfate concentrations in NL has strongly decreased since 2007 thanks to the shift from high-sulfur- to low-sulfur-content fuel used by ships. An improvement of air quality in the five cities included here could be achieved by further reducing local (urban) emissions of PM, NOx and NH3 (from both traffic and non-traffic sources) but also SO2 and PM (from maritime ships and ports) and giving high relevance to non-urban contributions by further reducing emissions of SO2 (maritime shipping) and NH3 (agriculture) and those from industry, regional BB sources and coal combustion.

Volcanic sulfate aerosols play a key role in air quality and climate. However, the rate of oxidation of sulfur dioxide (SO2) precursor gas to sulfate aerosols (SO42-) in volcanic plumes is poorly known, especially in the troposphere. Here we determine the chemical speciation as well as the intensity and temporal persistence of the impact on air quality of sulfate aerosols from the 2014–2015 Holuhraun flood lava eruption of Icelandic volcano Bárðarbunga. To do so, we jointly analyse a set of SO2 observations from satellite (OMPS and IASI) and ground-level measurements from air quality monitoring stations together with high temporal resolution mass spectrometry measurements of an Aerosol Chemical Speciation Monitor (ACSM) performed far from the volcanic source. We explore month/year long ACSM data in France from stations in contrasting environments, close and far from industrial sulfur-rich activities. We demonstrate that volcanic sulfate aerosols exhibit a distinct chemical signature in urban/rural conditions, with NO3:SO4 mass concentration ratios lower than for non-volcanic background aerosols. These results are supported by thermodynamic simulations of aerosol composition, using the ISORROPIA II model, which show that ammonium sulfate aerosols are preferentially formed at a high concentration of sulfate, leading to a decrease in the production of particulate ammonium nitrate. Such a chemical signature is however more difficult to identify at heavily polluted industrial sites due to a high level of background noise in sulfur. Nevertheless, aged volcanic sulfates can be distinguished from freshly emitted industrial sulfates according to their contrasting degree of anion neutralization. Combining AERONET (AErosol RObotic NETwork) sunphotometric data with ACSM observations, we also show a long persistence over weeks of pollution in volcanic sulfate aerosols, while SO2 pollution disappears in a few days at most. Finally, gathering 6-month long datasets from 27 sulfur monitoring stations of the EMEP (European Monitoring and Evaluation Programme) network allows us to demonstrate a much broader large-scale European pollution, in both SO2 and SO4, associated with the Holuhraun eruption, from Scandinavia to France. While widespread SO2 anomalies, with ground-level mass concentrations far exceeding background values, almost entirely result from the volcanic source, the origin of sulfate aerosols is more complex. Using a multi-site concentration-weighted trajectory analysis, emissions from the Holuhraun eruption are shown to be one of the main sources of SO4 at all EMEP sites across Europe and can be distinguished from anthropogenic emissions from eastern Europe but also from Great Britain. A wide variability in SO2:SO4 mass concentration ratios, ranging from 0.8 to 8.0, is shown at several stations geographically dispersed at thousands of kilometres from the eruption site. Despite this apparent spatial complexity, we demonstrate that these mass oxidation ratios can be explained by a simple linear dependency on the age of the plume, with a SO2-to-SO4 oxidation rate of 0.23 h−1. Most current studies generally focus on SO2, an unambiguous and more readily measured marker of the volcanic plume. However, the long persistence of the chemical fingerprint of volcanic sulfate aerosols at continental scale, as shown for the Holuhraun eruption here, casts light on the impact of tropospheric eruptions and passive degassing activities on air quality, health, atmospheric chemistry and climate.

The primary sugar compounds (SCs, defined as glucose, arabitol, and mannitol) are widely recognized as suitable molecular markers to characterize and apportion primary biogenic organic aerosol emission sources. This work improves our understanding of the spatial behavior and distribution of these chemical species and evidences their major effective environmental drivers. We conducted a large study focusing on the daily (24 h) PM10 SC concentrations for 16 increasing space scale sites (local to nationwide), over at least 1 complete year. These sites are distributed in several French geographic areas of different environmental conditions. Our analyses, mainly based on the examination of the short-term evolutions of SC concentrations, clearly show distance-dependent correlations. SC concentration evolutions are highly synchronous at an urban city scale and remain well correlated throughout the same geographic regions, even if the sites are situated in different cities. However, sampling sites located in two distinct geographic areas are poorly correlated. Such a pattern indicates that the processes responsible for the evolution of the atmospheric SC concentrations present a spatial homogeneity over typical areas of at least tens of kilometers. Local phenomena, such as the resuspension of topsoil and associated microbiota, do no account for the major emissions processes of SC in urban areas not directly influenced by agricultural activities. The concentrations of SC and cellulose display remarkably synchronous temporal evolution cycles at an urban site in Grenoble, indicating a common source ascribed to vegetation. Additionally, higher concentrations of SC at another site located in a crop field region occur during each harvest periods, indicating resuspension processes of plant materials (crop detritus, leaf debris) and associated microbiota for agricultural and nearby urbanized areas. Finally, ambient air temperature, relative humidity, and vegetation density constitute the main effective drivers of SC atmospheric concentrations.

A growing number of studies are using specific primary sugar species, such as sugar alcohols or primary saccharides, as marker compounds to characterize and apportion primary biogenic organic aerosols (PBOAs) in the atmosphere. To better understand their annual cycles, as well as their spatiotemporal abundance in terms of concentrations and sources, we conducted a large study focusing on three major atmospheric primary sugar compounds (i.e., arabitol, mannitol, and glucose) measured in various environmental conditions for about 5300 filter samples collected at 28 sites in France. Our results show significant atmospheric concentrations of polyols (defined here as the sum of arabitol and mannitol) and glucose at each sampling location, highlighting their ubiquity. Results also confirm that polyols and glucose are mainly associated with the coarse rather than the fine aerosol mode. At nearly all sites, atmospheric concentrations of polyols and glucose display a well-marked seasonal pattern, with maximum concentrations from late spring to early autumn, followed by an abrupt decrease in late autumn, and a minimum concentration during wintertime. Such seasonal patterns support biogenic emissions associated with higher biological metabolic activities (sporulation, growth, etc.) during warmer periods. Results from a previous comprehensive study using positive matrix factorization (PMF) based on an extended aerosol chemical composition dataset of up to 130 species for 16 of the same sample series have also been used in the present work. The polyols-to-PMPBOA ratio is 0.024±0.010 on average for all sites, with no clear distinction between traffic, urban, or rural typology. Overall, even if the exact origin of the PBOA source is still under investigation, it appears to be an important source of particulate matter (PM), especially during summertime. Results also show that PBOAs are significant sources of total organic matter (OM) in PM10 (13±4 % on a yearly average, and up to 40 % in some environments in summer) at most of the investigated sites. The mean PBOA chemical profile is clearly dominated by contribution from OM (78±9 % of the mass of the PBOA PMF on average), and only a minor contribution from the dust class (3±4 %), suggesting that ambient polyols are most likely associated with biological particle emissions (e.g., active spore discharge) rather than soil dust resuspension.

Similarities and differences in the submicron atmospheric aerosol chemical composition are analyzed from a unique set of measurements performed at 21 sites across Europe for at least one year. These sites are located between 35 and 62°N and 10° W – 26°E, and represent various types of settings (remote, coastal, rural, industrial, urban). Measurements were all carried out on-line with a 30-min time resolution using mass spectroscopy based instruments known as Aerosol Chemical Speciation Monitors (ACSM) and Aerosol Mass Spectrometers (AMS) and following common measurement guidelines. Data regarding organics, sulfate, nitrate and ammonium concentrations, as well as the sum of them called non-refractory submicron aerosol mass concentration ([NR-PM1]) are discussed. NR-PM1 concentrations generally increase from remote to urban sites. They are mostly larger in the mid-latitude band than in southern and northern Europe. On average, organics account for the major part (36–64%) of NR-PM1 followed by sulfate (12–44%) and nitrate (6–35%). The annual mean chemical composition of NR-PM1 at rural (or regional background) sites and urban background sites are very similar. Considering rural and regional background sites only, nitrate contribution is higher and sulfate contribution is lower in mid-latitude Europe compared to northern and southern Europe. Large seasonal variations in concentrations (μg/m³) of one or more components of NR-PM1 can be observed at all sites, as well as in the chemical composition of NR-PM1 (%) at most sites. Significant diel cycles in the contribution to [NR-PM1] of organics, sulfate, and nitrate can be observed at a majority of sites both in winter and summer. Early morning minima in organics in concomitance with maxima in nitrate are common features at regional and urban background sites. Daily variations are much smaller at a number of coastal and rural sites. Looking at NR-PM1 chemical composition as a function of NR-PM1 mass concentration reveals that although organics account for the major fraction of NR-PM1 at all concentration levels at most sites, nitrate contribution generally increases with NR-PM1 mass concentration and predominates when NR-PM1 mass concentrations exceed 40 μg/m³ at half of the sites.

In this study, the performance of two types of source apportionment models was evaluated by assessing the results provided by 40 different groups in the framework of an intercomparison organised by FAIRMODE WG3 (Forum for air quality modelling in Europe, Working Group 3). The evaluation was based on two performance indicators: z-scores and the root mean square error weighted by the reference uncertainty (RMSEu), with pre-established acceptability criteria. By involving models based on completely different and independent input data, such as receptor models (RMs) and chemical transport models (CTMs), the intercomparison provided a unique opportunity for their cross-validation. In addition, comparing the CTM chemical profiles with those measured directly at the source contributed to corroborate the consistency of the tested model results. The most commonly used RM was the US EPA- PMF version 5. RMs showed very good performance for the overall dataset (91% of z-scores accepted) while more difficulties were observed with the source contribution time series (72% of RMSEu accepted). Industrial activities proved to be the most difficult sources to be quantified by RMs, with high variability in the estimated contributions. In the CTMs, the sum of computed source contributions was lower than the measured gravimetric PM10 mass concentrations. The performance tests pointed out the differences between the two CTM approaches used for source apportionment in this study: brute force (or emission reduction impact) and tagged species methods. The sources meeting the z-score and RMSEu acceptability criteria tests were 50% and 86%, respectively. The CTM source contributions to PM10 were in the majority of cases lower than the RM averages for the corresponding source. The CTMs and RMs source contributions for the overall dataset were more comparable (83% of the z-scores accepted) than their time series (successful RMSEu in the range 25% - 34%). The comparability between CTMs and RMs varied depending on the source: traffic/exhaust and industry were the source categories with the best results in the RMSEu tests while the most critical ones were soil dust and road dust. The differences between RMs and CTMs source reconstructions confirmed the importance of cross validating the results of these two families of models. Keywords: Source apportionment, PM10, Receptor models, Chemical transport models, Intercomparison, Lens

The present study offers the first chemical characterization of the submicron (PM1) fraction in western Africa at a high time resolution, thanks to collocated measurements of nonrefractory (NR) species with an Aerosol Chemical Speciation Monitor (ACSM), black carbon and iron concentrations derived from absorption coefficient measurements with a 7-wavelength Aethalometer, and total PM1 determined by a TEOM-FDMS (tapered element oscillating microbalance–filtered dynamic measurement system) for mass closure. The field campaign was carried out over 3 months (March to June 2015) as part of the SHADOW (SaHAran Dust Over West Africa) project at a coastal site located in the outskirts of the city of Mbour, Senegal. With an averaged mass concentration of 5.4 µg m−3, levels of NR PM1 in Mbour were 3 to 10 times lower than those generally measured in urban and suburban polluted environments. Nonetheless the first half of the observation period was marked by intense but short pollution events (NR PM1 concentrations higher than 15 µg m−3), sea breeze phenomena and Saharan desert dust outbreaks (PM10 up to 900 µg m−3). During the second half of the campaign, the sampling site was mainly under the influence of marine air masses. The air masses on days under continental and sea breeze influences were dominated by organics (36–40 %), whereas sulfate particles were predominant (40 %) for days under oceanic influence. Overall, measurements showed that about three-quarters of the total PM1 were explained by NR PM1, BC (black carbon) and Fe (a proxy for dust) concentrations, leaving approximately one-quarter for other refractory species. A mean value of 4.6 % for the Fe ∕ PM1 ratio was obtained. Source apportionment of the organic fraction, using positive matrix factorization (PMF), highlighted the impact of local combustion sources, such as traffic and residential activities, which contribute on average to 52 % of the total organic fraction. A new organic aerosol (OA) source, representing on average 3 % of the total OA fraction, showed similar variation to nonrefractory particulate chloride. Its rose plot and daily pattern pointed to local combustion processes, i.e., two open waste-burning areas located about 6 and 11 km away from the receptor site and to a lesser extent a traditional fish-smoking location. The remaining fraction was identified as oxygenated organic aerosols (OOA), a factor that prevailed regardless of the day type (45 %) and was representative of regional (approximately three-quarters) but also local (approximately one-quarter) sources due to enhanced photochemical processes.

The third intensive measurement period (IMP) organised by the European Monitoring and Evaluation Programme (EMEP) under the UNECE CLTRAP took place in summer 2012 and winter 2013, with PM10 filter samples concurrently collected at 20 (16 EMEP) regional background sites across Europe for subsequent analysis of their mineral dust content. All samples were analysed by the same or a comparable methodology. Higher PM10 mineral dust loadings were observed at most sites in summer (0.5–10 µg m−3) compared to winter (0.2–2 µg m−3), with the most elevated concentrations in the southern- and easternmost countries, accounting for 20–40 % of PM10. Saharan dust outbreaks were responsible for the high summer dust loadings at western and central European sites, whereas regional or local sources explained the elevated concentrations observed at eastern sites. The eastern Mediterranean sites experienced elevated levels due to African dust outbreaks during both summer and winter. The mineral dust composition varied more in winter than in summer, with a higher relative contribution of anthropogenic dust during the former period. A relatively high contribution of K from non-mineral and non-sea-salt sources, such as biomass burning, was evident in winter at some of the central and eastern European sites. The spatial distribution of some components and metals reveals the influence of specific anthropogenic sources on a regional scale: shipping emissions (V, Ni, and SO42−) in the Mediterranean region, metallurgy (Cr, Ni, and Mn) in central and eastern Europe, high temperature processes (As, Pb, and SO42−) in eastern countries, and traffic (Cu) at sites affected by emissions from nearby cities.

As part of the European ACTRIS project, the first large Quadrupole Aerosol Chemical Speciation Monitor (Q-ACSM) intercomparison study was conducted in the region of Paris for 3 weeks during the late-fall – early-winter period (November–December 2013). The first week was dedicated to the tuning and calibration of each instrument, whereas the second and third were dedicated to side-by-side comparison in ambient conditions with co-located instruments providing independent information on submicron aerosol optical, physical, and chemical properties. Near real-time measurements of the major chemical species (organic matter, sulfate, nitrate, ammonium, and chloride) in the non-refractory submicron aerosols (NR-PM1) were obtained here from 13 Q-ACSM. The results show that these instruments can produce highly comparable and robust measurements of the NR-PM1 total mass and its major components. Taking the median of the 13 Q-ACSM as a reference for this study, strong correlations (r2 > 0.9) were observed systematically for each individual Q-ACSM across all chemical families except for chloride for which three Q-ACSMs showing weak correlations partly due to the very low concentrations during the study. Reproducibility expanded uncertainties of Q-ACSM concentration measurements were determined using appropriate methodologies defined by the International Standard Organization (ISO 17025, 1999) and were found to be 9, 15, 19, 28, and 36 % for NR-PM1, nitrate, organic matter, sulfate, and ammonium, respectively. However, discrepancies were observed in the relative concentrations of the constituent mass fragments for each chemical component. In particular, significant differences were observed for the organic fragment at mass-to-charge ratio 44, which is a key parameter describing the oxidation state of organic aerosol. Following this first major intercomparison exercise of a large number of Q-ACSMs, detailed intercomparison results are presented, along with a discussion of some recommendations about best calibration practices, standardized data processing, and data treatment.

Chemically resolved atmospheric aerosol data sets from the largest intercomparison of the Aerodyne aerosol chemical speciation monitors (ACSMs) performed to date were collected at the French atmospheric supersite SIRTA. In total 13 quadrupole ACSMs (Q-ACSM) from the European ACTRIS ACSM network, one time-of-flight ACSM (ToF-ACSM), and one high-resolution ToF aerosol mass spectrometer (AMS) were operated in parallel for about 3 weeks in November and December~2013. Part 1 of this study reports on the accuracy and precision of the instruments for all the measured species. In this work we report on the intercomparison of organic components and the results from factor analysis source apportionment by positive matrix factorisation (PMF) utilising the multilinear engine 2 (ME-2). Except for the organic contribution of mass-to-charge ratio m/z 44 to the total organics (f44), which varied by factors between 0.6 and 1.3 compared to the mean, the peaks in the organic mass spectra were similar among instruments. The m/z 44 differences in the spectra resulted in a variable f44 in the source profiles extracted by ME-2, but had only a minor influence on the extracted mass contributions of the sources. The presented source apportionment yielded four factors for all 15 instruments: hydrocarbon-like organic aerosol (HOA), cooking-related organic aerosol (COA), biomass burning-related organic aerosol (BBOA) and secondary oxygenated organic aerosol (OOA). ME-2 boundary conditions (profile constraints) were optimised individually by means of correlation to external data in order to achieve equivalent / comparable solutions for all ACSM instruments and the results are discussed together with the investigation of the influence of alternative anchors (reference profiles). A comparison of the ME-2 source apportionment output of all 15 instruments resulted in relative standard deviations (SD) from the mean between 13.7 and 22.7 % of the source's average mass contribution depending on the factors (HOA: 14.3 ± 2.2 %, COA: 15.0 ± 3.4 %, OOA: 41.5 ± 5.7 %, BBOA: 29.3 ± 5.0 %). Factors which tend to be subject to minor factor mixing (in this case COA) have higher relative uncertainties than factors which are recognised more readily like the OOA. Averaged over all factors and instruments the relative first SD from the mean of a source extracted with ME-2 was 17.2 %.

Abstract preview not available - see full-text PDF article.

The presence of various contaminants in airborne dusts from metal mining sites poses obvious risks to human health and the environment. Yet, few studies have thoroughly investigated the properties of airborne particles in terms of their morphology, size distribution and chemical composition, that are associated with health effects around mining activities. This review presents the most recent knowledge on the sources, physicochemical characteristics, and health and environmental risks associated with airborne dusts from various mining and smelting operations. The literature reviewed found only one research on atmospheric dust associated with hydrometallurgical plants compared to a larger number of pyrometallurgical processes/smelters studies. In addition, there are relatively few works comparing the distribution of metals between the fine and coarse size fractions around mining sites. Our analysis suggests that (i) exposure pathways of metal(loid)s to the human body are defined by linking concentration data in human biosamples and contaminated samples such as soils, drinking water and food, and (ii) chitosan and its derivatives may serve as an environmentally friendly and cost-effective method for soil remediation, with removal rates for metal(loid)s around 70-95 % at pH 6-8, and as dust suppressants for unpaved roads around mining sites. The specific limit values for PM and metal(loid)s at mining sites are not well documented. Despite the health risks associated with fine particles around mining areas, regulations have tended to focus on coarse particles. While some air quality agencies have issued regulations for occupational health and safety, there is no global alignment or common regulatory framework for enforcement. Future research priorities should focus on investigating PM and secondary inorganic aerosols associated with hydrometallurgical processes and dust monitoring, using online metal(loid)s analysers to identify the driving parameters in the deposition and resuspension process., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Arthur Kaniki, Jean-Marie Kanda reports a relationship with Kamoa Copper that includes: consulting or advisory. Arthur Kaniki, Jean-Marie Kanda reports a relationship with MMG Kinsevere that includes: consulting or advisory. Arthur Kaniki, Jean-Marie Kanda reports a relationship with Kamoto Copper Company (KCC) that includes: consulting or advisory. Arthur Kaniki, Jean-Marie Kanda reports a relationship with Société de Traitement du Terril de Lubumbashi (STL) that includes: consulting or advisory. Arthur Kaniki, Jean-Marie Kanda reports a relationship with Ruashi Mining that includes: consulting or advisory. Arthur Kaniki, Jean-Marie Kanda reports a relationship with Kipushi Corporation that includes: consulting or advisory. Arthur Kaniki, Jean-Marie Kanda reports a relationship with SOMIKA that includes: consulting or advisory. Arthur Kaniki, Jean-Marie Kanda reports a relationship with Boss Mining that includes: consulting or advisory., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

Shipping emissions were measured in Dunkirk, France. Elevated aerosol extinction coefficients (AEC), nitrogen dioxide (NO 2 ) and sulphur dioxide (SO 2 ) were observed up to 500 m from surface. Formaldehyde (HCHO) did not show an increase every time, which suggests that oxidation of emitted volatile organic compounds (VOCs) took longer than the transport to the observation path and dilution of direct emissions had occurred. Background NO 2, HCHO, and SO 2 levels were higher when the wind came over land or the surrounding industrial area, indicating that land-based sources contribute significantly; however, clear spikes in NO 2 and SO 2 were observed whenever ship plumes were sampled. Observations show that the ship emission contribution to pollution is significant, but land-based sources still dominate. The SO 2 /NO 2 ratio was low throughout the campaign, although varying according to the ship type, confirming that the new fuel content regulations are being followed by most ships in this region., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Terpenoids have long been known to originate from natural sources. However, there is growing evidence for emissions from anthropogenic activities in cities, in particular from the production, manufacturing, and use of household solvents. Here, as part of the DATAbASE (Do Anthropogenic Terpenoids mAtter in AtmoSpheric chEmistry?) project, we investigate for the first time the potential role of industrial activities on the terpenoid burden in the urban atmosphere. This study is based on continuous VOC observations from an intensive field campaign conducted in July 2014 at an industrial-urban background site located in Dunkirk, Northern France. More than 80 VOCs including oxygenated and terpenoid compounds were measured by on-line Thermal Desorption Gas Chromatography with a Flame Ionization Detection (TD-GC-FID) and Proton Transfer Reaction-Time of Flight Mass Spectrometry (PTR-ToFMS). Isoprene, α-pinene, limonene and the sum of monoterpenes were the terpenoids detected at average mixing ratios of 0.02 ± 0.02 ppbv, 0.02 ± 0.02 ppbv, 0.01 ± 0.01 ppbv and 0.03 ± 0.05 ppbv, respectively. Like other anthropogenic VOCs, the mixing ratios of terpenoids significantly increase downwind the industrial plumes by one order of magnitude. Positive Matrix Factorization (PMF) was performed to identify the different emission sources of VOCs and their contribution. Six factors out of the eight factors extracted (r 2  = 0.95) are related to industrial emissions such as solvent use, chemical and agrochemical storage, metallurgy, petrochemical, and coal-fired industrial activities. From the correlations between the industrial-type PMF factors, sulfur dioxide, and terpenoids, we determined their emissions ratios and we quantified for the first time their industrial emissions. The highest emission ratio is related to the alkene-dominated factor and is related to petrochemical, metallurgical and coal-fired industrial activities. The industrial emissions of monoterpenes equal 8.1 ± 4.3 tons/year. Those emissions are as significant as the non-industrialized anthropogenic ones estimated for the Paris megacity., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Veronique RIFFAULT reports financial support was provided by French National Research Agency. Veronique RIFFAULT reports financial support was provided by Hauts-de-France Regional Council. Mariana FARHAT reports financial support was provided by University of Clermont Auvergne. Charbel AFIF reports financial support was provided by Saint-Joseph University of Beirut Research Council. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Under the EU Air Quality Directive (AQD) 2008/50/EC member states are required to undertake routine monitoring of PM 2.5 composition at background stations. The AQD states for PM 2.5 speciation this should include at least: nitrate NO 3 - , sulfate SO 4 2 - , chloride (Cl - ), ammonium (NH4 + ), sodium (Na + ), potassium (K + ), magnesium (Mg 2+ ), calcium (Ca 2+ ), elemental carbon (EC) and organic carbon (OC). Until 2017, it was the responsibility of each country to determine the methodology used to report the composition for the inorganic components of PM 2.5 . In August 2017 a European standard method of measurement of PM 2.5 inorganic chemical components ( NO 3 - , SO 4 2 - , Cl - , NH 4 + , Na + , K + , Mg 2+ , Ca 2+ ) as deposited on filters (EN16913:2017) was published. From August 2019 this then became the European standard method. This filter method is labour-intensive and provides limited time resolution and is prone to losses of volatile compounds. There is therefore increasing interest in the use of alternative automated methods. For example, the UK reports hourly PM 2.5 chemical composition using the Monitor for AeRosols and Gases in Ambient air (MARGA, Metrohm, NL). This study is a pre-assessment review of available data to demonstrate if or to what extent equivalence is possible using either the MARGA or other available automatic methods, including the Aerosol Chemical Speciation Monitor (ACSM, Aerodyne Research Inc. US) and the Ambient Ion Monitor (AIM, URG, US). To demonstrate equivalence three objectives were to be met. The first two objectives focused on data capture and were met by all three instruments. The third objective was to have less than a 50% expanded uncertainty compared to the reference method for each species. Analysis of this objective was carried out using existing paired datasets available from different regions around the world. It was found that the MARGA (2006-2019 model) had the potential to demonstrate equivalence for all species in the standard, though it was only through a combination of case studies that it passed uncertainty criteria. The ACSM has the potential to demonstrate equivalence for NH 4 + , SO 4 2 - and in some conditions NO 3 - , but did not for Cl - due to its inability to quantify refractory aerosol such as sea salt. The AIM has the potential for NH 4 + , NO 3 - , SO 4 2 - , Cl - and Mg 2+ . Future investigations are required to determine if the AIM could be optimised to meet the expanded uncertainty criterion for Na + , K + and Ca 2+ . The recommendation is that a second stage to demonstrate equivalence is required which would include both laboratory and field studies of the three candidate methods and any other technologies identified with the potential to report the required species., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

This study aims to picture the phenomenology of urban ambient total lung deposited surface area (LDSA) (including head/throat (HA), tracheobronchial (TB), and alveolar (ALV) regions) based on multiple path particle dosimetry (MPPD) model during 2017-2019 period collected from urban background (UB, n = 15), traffic (TR, n = 6), suburban background (SUB, n = 4), and regional background (RB, n = 1) monitoring sites in Europe (25) and USA (1). Briefly, the spatial-temporal distribution characteristics of the deposition of LDSA, including diel, weekly, and seasonal patterns, were analyzed. Then, the relationship between LDSA and other air quality metrics at each monitoring site was investigated. The result showed that the peak concentrations of LDSA at UB and TR sites are commonly observed in the morning (06:00-8:00 UTC) and late evening (19:00-22:00 UTC), coinciding with traffic rush hours, biomass burning, and atmospheric stagnation periods. The only LDSA night-time peaks are observed on weekends. Due to the variability of emission sources and meteorology, the seasonal variability of the LDSA concentration revealed significant differences (p = 0.01) between the four seasons at all monitoring sites. Meanwhile, the correlations of LDSA with other pollutant metrics suggested that Aitken and accumulation mode particles play a significant role in the total LDSA concentration. The results also indicated that the main proportion of total LDSA is attributed to the ALV fraction (50 %), followed by the TB (34 %) and HA (16 %). Overall, this study provides valuable information of LDSA as a predictor in epidemiological studies and for the first time presenting total LDSA in a variety of European urban environments., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

More than 7 million early deaths/year are attributable to air pollution. Current health concerns are especially focused on air pollution-derived particulate matter (PM). Although oxidative stress-induced airway inflammation is one of the main adverse outcome pathways triggered by air pollution-derived PM, the persistence of both these underlying mechanisms, even after exposure cessation, remained poorly studied. In this study, A/JOlaHsd mice were also exposed acutely (24 h) or sub-chronically (4 weeks), with or without a recovery period (12 weeks), to two urban PM 2.5 samples collected during contrasting seasons (i.e., autumn/winter, AW or spring/summer, SS). The distinct intrinsic oxidative potentials (OPs) of AW and SS PM 2.5 , as evaluated in acellular conditions, were closely related to their respective physicochemical characteristics and their respective ability to really generate ROS over-production in the mouse lungs. Despite the early activation of the nuclear factor erythroid 2-related factor 2 (Nrf2) cell signaling pathway by AW and, in a lesser degree, SS PM 2.5 , in the murine lungs after acute and sub-chronic exposures, the critical redox homeostasis was not restored, even after the exposure cessation. Accordingly, an inflammatory response was reported through the activation of the nuclear factor-kappa B (NF-κB) cell signaling pathway activation, the secretion of cytokines, and the recruitment of inflammatory cells, in the murine lungs after the acute and sub-chronic exposures to AW and, in a lesser extent, to SS PM 2.5 , which persisted after the recovery period. Taken together, these original results provided, for the first time, new relevant insights that air pollution-derived PM 2.5 , with relatively high intrinsic OPs, induced oxidative stress and inflammation, which persisted admittedly at a lower level in the lungs after the exposure cessation, thereby contributing to the occurrence of molecular and cellular adverse events leading to the development and/or exacerbation of future chronic inflammatory lung diseases and even cancers., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

This study presents the first long-term online measurements of submicron (PM 1 ) particles at the ATOLL (ATmospheric Observations in liLLe) platform, in northern France. The ongoing measurements using an Aerosol Chemical Speciation Monitor (ACSM) started at the end of 2016 and the analysis presented here spans through December 2020. At this site, the mean PM 1 concentration is 10.6 μg m -3 , dominated by organic aerosols (OA, 42.3%) and followed by nitrate (28.9%), ammonium (12.3%), sulfate (8.6%), and black carbon (BC, 8.0%). Large seasonal variations of PM 1 concentrations are observed, with high concentrations during cold seasons, associated with pollution episodes (e.g. over 100 μg m -3 in January 2017). To study OA origins over this multiannual dataset we performed source apportionment analysis using rolling positive matrix factorization (PMF), yielding two primary OA factors, a traffic-related hydrocarbon-like OA (HOA) and biomass-burning OA (BBOA), and two oxygenated OA (OOA) factors. HOA showed a homogeneous contribution to OA throughout the seasons (11.8%), while BBOA varied from 8.1% (summer) to 18.5% (winter), the latter associated with residential wood combustion. The OOA factors were distinguished between their less and more oxidized fractions (LO-OOA and MO-OOA, on average contributing 32% and 42%, respectively). During winter, LO-OOA is identified as aged biomass burning, so at least half of OA is associated with wood combustion during this season. Furthermore, ammonium nitrate is also a predominant aerosol component during cold-weather pollution episodes - associated with fertilizer usage and traffic emissions. This study provides a comprehensive analysis of submicron aerosol sources at the recently established ATOLL site in northern France from multiannual observations, depicting a complex interaction between anthropogenic and natural sources, leading to different mechanisms of air quality degradation in the region across different seasons., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

This study analyzed the variability of equivalent black carbon (eBC) mass concentrations and their sources in urban Europe to provide insights into the use of eBC as an advanced air quality (AQ) parameter for AQ standards. This study compiled eBC mass concentration datasets covering the period between 2006 and 2022 from 50 measurement stations, including 23 urban background (UB), 18 traffic (TR), 7 suburban (SUB), and 2 regional background (RB) sites. The results highlighted the need for the harmonization of eBC measurements to allow for direct comparisons between eBC mass concentrations measured across urban Europe. The eBC mass concentrations exhibited a decreasing trend as follows: TR > UB > SUB > RB. Furthermore, a clear decreasing trend in eBC concentrations was observed in the UB sites moving from Southern to Northern Europe. The eBC mass concentrations exhibited significant spatiotemporal heterogeneity, including marked differences in eBC mass concentration and variable contributions of pollution sources to bulk eBC between different cities. Seasonal patterns in eBC concentrations were also evident, with higher winter concentrations observed in a large proportion of cities, especially at UB and SUB sites. The contribution of eBC from fossil fuel combustion, mostly traffic (eBC T ) was higher than that of residential and commercial sources (eBC RC ) in all European sites studied. Nevertheless, eBC RC still had a substantial contribution to total eBC mass concentrations at a majority of the sites. eBC trend analysis revealed decreasing trends for eBC T over the last decade, while eBC RC remained relatively constant or even increased slightly in some cities., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

Background: Promptly identifying individuals with addictive disorders reduces mortality and morbidity and improves quality of life. Although screening in primary care with the Screening, Brief Intervention and Referral Treatment strategy has been recommended since 2008, it remains underutilized. This may be due to barriers including lack of time, patient reluctance or perhaps the timing and approach for discussing addiction with their patients., Objective: This study aims to explore and cross-analyze patient and addiction specialist experiences and opinions about early addictive disorder screening in primary care to identify interaction-related screening obstacles., Design and Participants: Qualitative study with purposive maximum variation sampling among nine addiction specialists and eight individuals with addiction disorders conducted between April 2017 and November 2019 in Val-de-Loire, France., Main Measures: Using a grounded theory approach, verbatim data was collected from face-to-face interviews with addiction specialists and individuals with addiction disorders. These interviews explored their opinions and experiences with addiction screening in primary care. Initially, two independent investigators analyzed the coded verbatim according to the data triangulation principle. Secondly, convergences and divergences between addiction specialist and addict verbatim categories were identified, analyzed, and conceptualized., Key Results: Four main interaction-related obstacles to early addictive disorder screening in primary care were identified and conceptualized: the new concepts of shared self-censorship and the patient's personal red line, issues not addressed during consultations, and opposition between how physicians and patients would like to approach addictive disorder screening., Conclusions: To continue analysis of addictive disorder screening dynamics, further studies to examine the perspectives of all those involved in primary care are required. The information revealed from these studies will provide ideas to help patients and caregivers start discussing addiction and to help implement a collaborative team-based care approach., Trial Registration: This study is registered with the Commission Nationale de l'Informatique et des Libertés (CNIL) under No. 2017-093., (© 2023. The Author(s).)

Organic aerosol (OA) is a key component of total submicron particulate matter (PM 1 ), and comprehensive knowledge of OA sources across Europe is crucial to mitigate PM 1 levels. Europe has a well-established air quality research infrastructure from which yearlong datasets using 21 aerosol chemical speciation monitors (ACSMs) and 1 aerosol mass spectrometer (AMS) were gathered during 2013-2019. It includes 9 non-urban and 13 urban sites. This study developed a state-of-the-art source apportionment protocol to analyse long-term OA mass spectrum data by applying the most advanced source apportionment strategies (i.e., rolling PMF, ME-2, and bootstrap). This harmonised protocol was followed strictly for all 22 datasets, making the source apportionment results more comparable. In addition, it enables quantification of the most common OA components such as hydrocarbon-like OA (HOA), biomass burning OA (BBOA), cooking-like OA (COA), more oxidised-oxygenated OA (MO-OOA), and less oxidised-oxygenated OA (LO-OOA). Other components such as coal combustion OA (CCOA), solid fuel OA (SFOA: mainly mixture of coal and peat combustion), cigarette smoke OA (CSOA), sea salt (mostly inorganic but part of the OA mass spectrum), coffee OA, and ship industry OA could also be separated at a few specific sites. Oxygenated OA (OOA) components make up most of the submicron OA mass (average = 71.1%, range from 43.7 to 100%). Solid fuel combustion-related OA components (i.e., BBOA, CCOA, and SFOA) are still considerable with in total 16.0% yearly contribution to the OA, yet mainly during winter months (21.4%). Overall, this comprehensive protocol works effectively across all sites governed by different sources and generates robust and consistent source apportionment results. Our work presents a comprehensive overview of OA sources in Europe with a unique combination of high time resolution (30-240 min) and long-term data coverage (9-36 months), providing essential information to improve/validate air quality, health impact, and climate models., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Authors. Published by Elsevier Ltd.. All rights reserved.)

The indoor environment is usually more polluted than outdoors due to emissions of gas and particle-phase pollutants from multiple sources, leading to their accumulation on top of the infiltration of outdoor pollution. While it is widely recognized that negative health effects arise from the exposure to outdoor air pollution, exposure to indoor pollutants also needs to be well assessed since we spend most of our time (~90%) breathing indoors. Indoor concentrations of pollutants are driven by physicochemical processes and chemical transformations taking place indoors, acting as sources and/or sinks. While these basic concepts are understood, assessing the contribution of each process is still challenging. In this study, we deployed online instrumentation in an unoccupied room to test a methodology for the apportionment of indoor and outdoor pollutant sources. This method was successfully applied to the apportionment of PM 1 and VOCs, however, there are limitations for reactive gases such as O 3 . The results showed that this unoccupied indoor environment acts as a source of VOCs and contributes 87% on OVOCs and 6% on C x H y , while it acts as a sink for particles, likely due to losses through volatilization up to 60%.

Industrial metalworking facilities emit a variety of air toxics including volatile organic compounds, polycyclic aromatic hydrocarbons (PAHs) and heavy metals. In order to investigate these emissions, a 1-month multi-instrument field campaign was undertaken at an industrial site in Grande-Synthe, Dunkirk (France), in May and June 2012. One of the main objectives of the study was to provide new information on the chemical composition of particulate matter with aerodynamic diameters smaller than 2.5 μm (PM 2.5 ) in the vicinity of metalworking facilities. An aerosol time-of-flight mass spectrometer (ATOFMS) was deployed to provide size-resolved chemical mixing state measurements of ambient single particles at high temporal resolution. This mixing state information was then used to apportion PM 2.5 to local metalworking facilities influencing the receptor site. Periods when the site was influenced by metalworking sources were characterised by a pronounced increase in particles containing toxic metals (manganese, iron, lead) and polycyclic aromatic hydrocarbons (PAHs) with a variety of chemical mixing states. The association of specific particle classes with a nearby ferromanganese alloy manufacturing plant was confirmed through comparison with previous analysis of raw materials (ores) and chimney filter particle samples collected at the facility. Particles associated with emissions from a nearby steelworks were also identified. The contribution of local metalworking activities to PM 2.5 at the receptor site for the period when the ATOFMS was deployed ranged from 1 to 65% with an average contribution of 17%, while the remaining mass was attributed to other local and regional sources. These findings demonstrate the impact of metalworking facilities on air quality downwind and provide useful single particle signatures for future source apportionment studies in communities impacted by metalworking emissions., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The electronic cigarettes (e-cigs) and more recently the heated tobacco products (HTP) provide alternatives for smokers as they are generally perceived to be less harmful than conventional cigarettes. However, it is crucial to compare the health risks of these different emergent devices, in order to determine which product should be preferred to substitute cigarette. The present study aimed to compare the composition of emissions from HTP, e-cigs and conventional cigarettes, regarding selected harmful or potentially harmful compounds, and their toxic impacts on the human bronchial epithelial BEAS-2B cells. The HTP emitted less polycyclic aromatic hydrocarbons and carbonyls than the conventional cigarette. However, amounts of these compounds in HTP aerosols were still higher than in e-cig vapours. Concordantly, HTP aerosol showed reduced cytotoxicity compared to cigarette smoke but higher than e-cig vapours. HTP and e-cig had the potential to increase oxidative stress and inflammatory response, in a manner similar to that of cigarette smoke, but after more intensive exposures. In addition, increasing e-cig power impacted levels of certain toxic compounds and related oxidative stress. This study provides important data necessary for risk assessment by demonstrating that HTP might be less harmful than tobacco cigarette but considerably more harmful than e-cig., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The knowledge of the underlying mechanisms by which particulate matter (PM) exerts its health effects is still incomplete since it may trigger various symptoms as some persons may be more susceptible than others. Detailed studies realized in more relevant in vitro models are highly needed. Healthy normal human bronchial epithelial (NHBE), asthma-diseased human bronchial epithelial (DHBE), and COPD-DHBE cells, differentiated at the air-liquid interface, were acutely or repeatedly exposed to fine (i.e., PM 2.5-0.18 , also called FP) and quasi-ultrafine (i.e., PM 0.18 , also called UFP) particles. Immunofluorescence labelling of pan-cytokeratin, MUC5AC, and ZO-1 confirmed their specific cell-types. Baselines of the inflammatory mediators secreted by all the cells were quite similar. Slight changes of TNFα, IL-1β, IL-6, IL-8, GM-CSF, MCP-1, and/or TGFα, and of H3K9 histone acetylation supported a higher inflammatory response of asthma- and especially COPD-DHBE cells, after exposure to FP and especially UFP. At baseline, 35 differentially expressed genes (DEG) in asthma-DHBE, and 23 DEG in COPD-DHBE, compared to NHBE cells, were reported. They were involved in biological processes implicated in the development of asthma and COPD diseases, such as cellular process (e.g., PLA2G4C, NLRP1, S100A5, MUC1), biological regulation (e.g., CCNE1), developmental process (e.g., WNT10B), and cell component organization and synthesis (e.g., KRT34, COL6A1, COL6A2). In all the FP or UFP-exposed cell models, DEG were also functionally annotated to the chemical metabolic process (e.g., CYP1A1, CYP1B1, CYP1A2) and inflammatory response (e.g., EREG). Another DEG, FGF-1, was only down-regulated in asthma and specially COPD-DHBE cells repeatedly exposed. While RAB37 could help to counteract the down-regulation of FGF-1 in asthma-DHBE cells, the deregulation of FGR, WNT7B, VIPR1, and PPARGC1A could dramatically contribute to make it worse in COPD-DHBE cells. Taken together, these data contributed to support the highest effects of UFP versus FP and highest sensitivity of asthma- and notably COPD-DHBE versus NHBE cells., (Copyright © 2019 Elsevier Inc. All rights reserved.)

In a context where a significant fraction of the population lives near industrial areas, the main objectives of this study are to provide (a) new data on PM 2.5 chemical compositions, heavy-metal concentrations and trace gases released by metalworking activities and (b) new information on the near-field evolution (up to about a thousand meters) of such industrial plumes in terms of particle chemical composition and size distribution. For that purpose, a one-month field campaign was performed in an industrial area near the city of Dunkirk (Northern France), combining measurements of atmospheric dynamics and physico-chemical characterization of air masses. Comparisons between several elemental ratios (mainly Mn/Fe), particle size distributions and volatile organic compound (VOC) concentrations at the stacks and at a near-field site suggest that plumes of a ferromanganese alloy plant were quickly mixed with pollutants emitted by other sources (mainly other industries, possibly traffic and sea spray), in particular a neighboring steelworks, before reaching the sampling site. This led to the emergence of secondary particles related to condensation and/or aggregation phenomena inside the plumes. Metalworking emissions were also identified as a source of new particle formation, formed through the emission of gaseous precursors and their fast transformation and condensation, over a timescale of minutes before reaching the near-field site 800 m downwind. Ultrafine particles emitted at the stacks also quickly agglomerated to form larger particles before reaching the near-field site. These results show that, even over short distances, the chemical composition and size distribution of metalworking plumes may evolve rapidly and the characteristics of particles at the boundary of an industrial area (especially in contiguous urban areas) may differ from those emitted directly at the stacks., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Exposure to particulate matter (PM) is leading to various respiratory health outcomes. Compared to coarse and fine particles, less is known about the effects of chronic exposure to ultrafine particles, despite their higher number and reactivity. In the present study, we performed a time-course experiment in mice to better analyze the lung impact of atmospheric ultrafine particles, with regard to the effects induced by fine particles collected on the same site. Trace element and PAH analysis demonstrated the almost similar chemical composition of both particle fractions. Mice were exposed intranasally to FF or UFP according to acute (10, 50 or 100 µg of PM) and repeated (10 µg of PM 3 times a week during 1 or 3 months) exposure protocols. More particle-laden macrophages and even greater chronic inflammation were observed in the UFP-exposed mice lungs. Histological analyses revealed that about 50% of lung tissues were damaged in mice exposed to UFP for three months versus only 35% in FF-exposed mice. These injuries were characterized by alveolar wall thickening, macrophage infiltrations, and cystic lesions. Taken together, these results strongly motivate the update of current regulations regarding ambient PM concentrations to include UFP and limit their emission.

The adsorption properties of mineral dust toward organic molecules are poorly characterized so far. Heterogeneous processes between trace gases and mineral particles can affect the oxidative capacity of the atmosphere as well as constitute additional sources or sinks for these species. The current study investigates the adsorption efficiencies of natural dust samples collected from North and West Africa, Saudi Arabia, and Arizona desert regions toward isopropyl alcohol (IPA), a common organic pollutant released in significant amounts in the atmosphere, which is used here as a probe molecule. Experiments are performed under atmospheric pressure, room temperature 296 K, over the concentration range (0.15-615) × 10 13 molecules cm -3 , and in the relative humidity (RH) range (0.01-85)%. The kinetic measurements are conducted inside a U-shaped flow reactor using zero air as bath gas and a chemical ionization mass spectrometer for real-time gas-phase monitoring. Kinetic and surface parameters such as initial uptake coefficients (γ 0 ) and adsorption equilibrium constants are measured. γ 0 is found to be independent of the IPA gas-phase concentration. However, concerning RH, γ is independent up to ca. 20%, but a dramatic decrease is observed above that threshold implying a competition between water molecules and IPA after the formation of a water monolayer on the dust sample. These results are simulated using an empirical expression of the form γ RH = γ dry - aRH b that allows the extrapolation of the uptake coefficient under any tropospheric RH conditions. Our uptake coefficient values show a linear correlation with the elemental Al/Si and Fe/Si ratios of the natural dusts studied. This was confirmed when comparing with data on inorganic species gathered from a comprehensive literature review (no such data exist for organics). To the best of our knowledge, this work is the first to demonstrate that initial uptakes are linearly correlated with the Al/Si ratio for both organic and inorganic species.

Even though clinical, epidemiological and toxicological studies have progressively provided a better knowledge of the underlying mechanisms by which air pollution-derived particulate matter (PM) exerts its harmful health effects, further in vitro studies on relevant cell systems are still needed. Hence, aiming of getting closer to the human in vivo conditions, primary human bronchial epithelial cells derived from normal subjects (NHBE) or sensitive chronic obstructive pulmonary disease (COPD)-diseased patients (DHBE) were differentiated at the air-liquid interface. Thereafter, they were repeatedly exposed to air pollution-derived PM 2.5 to study the occurrence of some relevant genetic and/or epigenetic endpoints. Concentration-, exposure- and season-dependent increases of OH-B[a]P metabolites in NHBE, and to a lesser extent, COPD-DHBE cells were reported; however, there were more tetra-OH-B[a]P and 8-OHdG DNA adducts in COPD-DHBE cells. No increase in primary DNA strand break nor chromosomal aberration was observed in repeatedly exposed cells. Telomere length and telomerase activity were modified in a concentration- and exposure-dependent manner in NHBE and particularly COPD-DHBE cells. There were a global DNA hypomethylation, a P16 gene promoter hypermethylation, and a decreasing DNA methyltransferase activity in NHBE and notably COPD-DHBE cells repeatedly exposed. Changes in site-specific methylation, acetylation, and phosphorylation of histone H3 (i.e., H3K4me3, H3K9ac, H3K27ac, and H3S10ph) and related enzyme activities occurred in a concentration- and exposure-dependent manner in all the repeatedly exposed cells. Collectively, these results highlighted the key role played by genetic and even epigenetic events in NHBE and particularly sensitive COPD-DHBE cells repeatedly exposed to air pollution-derived PM 2.5 and their different responsiveness. While these specific epigenetic changes have been already described in COPD and even lung cancer phenotypes, our findings supported that, together with genetic events, these epigenetic events could dramatically contribute to the shift from healthy to diseased phenotypes following repeated exposure to relatively low doses of air pollution-derived PM 2.5 ., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

According to the literature, tiny amounts of transition metals in airborne fine particles (PM 2.5 ) may induce proinflammatory cell response through reactive oxygen species production. The solubility of particle-bound metals in physiological fluids, i.e. the metal bioaccessibility is driven by factors such as the solution chemical composition, the contact time with the particles, and the solid-to-liquid phase ratio (S/L). In this work, PM 2.5 -bound metal bioaccessibility was assessed in various physiological-like solutions including cell culture media in order to evidence the potential impact on normal human bronchial epithelial cells (NHBE) when studying the cytotoxicity and inflammatory responses of PM 2.5 towards the target bronchial compartment. Different fluids (H 2 O, PBS, LHC-9 culture medium, Gamble and human respiratory mucus collected from COPD patients), various S/L conditions (from 1/6000 to 1/100,000) and exposure times (6, 24 and 72h) were tested on urban PM 2.5 samples. In addition, metals' total, soluble and insoluble fractions from PM 2.5 in LHC-9 were deposited on NHBE cells (BEAS-2B) to measure their cytotoxicity and inflammatory potential (i.e., G6PDH activity, secretion of IL-6 and IL-8). The bioaccessibility is solution-dependent. A higher salinity or organic content may increase or inhibit the bioaccessibiliy according to the element, as observed in the complex mucus matrix. Decreasing the S/L ratio also affect the bioaccessibility depending on the solution tested while the exposure time appears less critical. The LHC-9 culture medium appears to be a good physiological proxy as it induces metal bioaccessibilities close to the mucus values and is little affected by S/L ratios or exposure time. Only the insoluble fraction can be linked to the PM 2.5 -induced cytotoxicity. By contrast, both soluble and insoluble fractions can be related to the secretion of cytokines. The metal bioaccessibility in LHC-9 of the total, soluble, and insoluble fractions of the PM 2.5 under study did not explain alone, the cytotoxicity nor the inflammatory response observed in BEAS-2B cells. These findings confirm the urgent need to perform further toxicological studies to better evaluate the synergistic effect of both bioaccessible particle-bound metals and organic species., (Copyright © 2017 Elsevier Inc. All rights reserved.)

The chemical composition of particulate matter sampled at two French Northern sites (Douai, DO - urban background; Grande-Synthe, GS - industrialized coastal site) was investigated during two summer and winter field campaigns at each site. Measurements of the major chemical species (organic, sulfate, nitrate, ammonium, chloride) in the non-refractory submicron aerosols (NR-PM 1 ) were carried out by a High Resolution Time-of-Flight Aerosol Mass Spectrometer. Black Carbon in PM 2.5 was monitored using an Aethalometer, while the OC and EC fractions and some targeted chemical organic families (polycyclic aromatic hydrocarbons, PAHs; dicarboxylic acids, DCAs) were quantified by the simultaneous collection of PM 2.5 on filters followed by offline analyses. The seasonal trends and winter-to-summer (W/S) concentration ratios are discussed in this paper. Results indicate that the total average mass concentrations of PM 2.5 varied between 20.5μgm -3 and 32.6μgm -3 in DO and between 10.6μgm -3 and 29.9μgm -3 in GS during summer and winter, respectively. Similar concentration patterns were found for PAHs and Organic Carbon (OC, representing ~80% of the total carbon) with highest concentrations in winter at the urban site. DCA concentrations showed less seasonal variations, although the highest value also appeared during winter. Total NR-PM 1 presented concentrations in summer lower by a factor of 4 (for DO) and 10 (for GS) than those observed in winter. Organics and nitrates dominated the NR-PM 1 in DO for both seasons and during winter in GS while sulfates and nitrates were the most dominant species in summer in GS. Average chloride concentrations were slightly more important in GS than those in DO related to its use in industrial processes and no significant seasonal trend was observed. The size-resolved chemical composition showed that aerosols sampled in DO in winter are more aged than those collected in GS where fresh emissions of sulfate from the industrial sector were observed., (Copyright © 2015 Elsevier B.V. All rights reserved.)

The adsorption of isopropanol on Gobi dust was investigated in the temperature (T) and relative humidity (RH) ranges of 273-348 K and <0.01-70%, respectively, using zero air as bath gas. The kinetic measurements were performed using a novel experimental setup combining Fourier-Transform InfraRed spectroscopy (FTIR) and selected-ion flow-tube mass spectrometry (SIFT-MS) for gas-phase monitoring. The initial uptake coefficient, γ 0 , of isopropanol was measured as a function of several parameters (concentration, temperature, relative humidity, dust mass). γ 0 was found independent of temperature while it was inversely dependent on relative humidity according to the empirical expression: γ 0 = 5.37 × 10 -7 /(0.77+RH 0.6 ). Furthermore, the adsorption isotherms of isopropanol were determined and the results were simulated with the Langmuir adsorption model to obtain the partitioning constant, K Lin , as a function of temperature and relative humidity according to the expressions: K Lin = (1.1 ± 0.3) × 10 -2 exp [(1764 ± 132)/T] and K Lin = 15.75/(3.21+RH 1.77 ). Beside the kinetics, a detailed product study was conducted under UV irradiation conditions (350-420 nm) in a photochemical reactor. Acetone, formaldehyde, acetic acid, acetaldehyde, carbon dioxide, and water were identified as gas-phase products. Besides, the surface products were extracted and analyzed employing HPLC; Hydroxyacetone, formaldehyde, acetaldehyde, acetone, and methylglyoxal were identified as surface products while the formation of several other compounds were observed but were not identified. Moreover, the photoactivation of the surface was verified employing diffuse reflectance infrared fourier transform spectroscopy (DRIFTs).

The heterogeneous interaction of limonene and toluene with Saharan dusts was investigated under dark conditions, pressure of 1 atm, and temperature 293 K. The mineral dust samples were collected from six different regions along the Sahara desert, extending from Tunisia to the western Atlantic coastal areas of Morocco, and experiments were carried out with the smallest sieved fractions, that is, inferior to 100 μm. N2 sorption measurements, granulometric analysis, and X-ray fluorescence and diffraction (XRF and XRD) measurements were conducted to determine the physicochemical properties of the particles. The chemical characterization showed that dust originating from mideastern Sahara has a significantly higher SiO2 content (∼ 82%) than dust collected from the western coastal regions where the SiO2 relative abundance was ∼ 50%. A novel experimental setup combining diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), selected-ion flow-tube mass spectrometry (SIFT-MS), and long path transmission Fourier transform infrared spectroscopy (FTIR) allowed us to follow both the adsorbed and gas phases. The kinetic adsorption/desorption measurements were performed using purified dry air as bath gas, exposing each dust surface to 10 ppm of the selective volatile organic compound (VOC). The adsorption of limonene was independent of the SiO2 content, given the experimental uncertainties, and the coverage measurements ranged between (10 and 18) × 10(13) molecules cm(-2). Experimental results suggest that other metal oxides that could possibly influence dust acidity may enhance the adsorption of limonene. On the contrary, in the case of toluene, the adsorption capacities of the Saharan samples increased with decreasing SiO2 content; however, the coverage measurements were significantly lower than those of limonene and ranged between (2 and 12) × 10(13) molecules cm(-2). Flushing the surface with purified dry air showed that VOC desorption is not a completely reversible process at room temperature. The reversibly adsorbed fraction and the rate coefficients of desorption, kdes, depended inversely on the SiO2 relative abundance for both VOCs.

The kinetics of the reactions of limonene with OH and OD radicals has been studied using a low-pressure flow tube reactor coupled with a quadrupole mass spectrometer: OH + C10H16 → products (1), OD + C10H16 → products (2). The rate constants of the title reactions were determined using four different approaches: either monitoring the kinetics of OH (OD) radicals or limonene consumption in excess of limonene or of the radicals, respectively (absolute method), and by the relative rate method using either the reaction OH (OD) + Br2 or OH (OD) + DMDS (dimethyl disulfide) as the reference one and following HOBr (DOBr) formation or DMDS and limonene consumption, respectively. As a result of the absolute and relative measurements, the overall rate coefficients, k1 = (3.0 ± 0.5) × 10(-11) exp((515 ± 50)/T) and k2 = (2.5 ± 0.6) × 10(-11) exp((575 ± 60)/T) cm(3) molecule(-1) s(-1), were determined at a pressure of 1 Torr of helium over the temperature ranges 220-360 and 233-353 K, respectively. k1 was found to be pressure independent over the range 0.5-5 Torr. There are two possible pathways for the reaction between OH (OD) and limonene: addition of the radical to one of the limonene double bonds (reactions 1a and 2a ) and abstraction of a hydrogen atom (reactions 1b and 2b ), resulting in the formation of H2O (HOD). Measurements of the HOD yield as a function of temperature led to the following branching ratio of the H atom abstraction channel: k2b/k2 = (0.07 ± 0.03) × exp((460 ± 140)/T) for T = (253-355) K.

The ozonolysis of submicrometer (150 nm) oleic acid (OL) particles in an aerosol flow tube has been studied for a wide range of initial ozone concentrations from 25 ppb to 1100 ppb. Both reactants were monitored, as well as the four main reaction products (nonanal, azelaic acid, nonanoic acid, and 9-oxononanoic), by gas chromatography-mass spectrometer, high resolution-time of flight-aerosol mass spectrometer, proton transfer reaction-time of flight-mass spectrometer, and ozone analyzer. The values for the initial uptake coefficients derived from each reactant decay are in the same range: γO3-0 = (1.5 ± 0.1) × 10(-3) and γOL-0 = (1.0 ± 0.2) × 10(-3). The ozone uptake coefficient is highly decreased when particles are in an advanced oxidized state (γO3-∞ = 5 × 10(-5)). Concerning reaction products, nonanal was mainly observed in the gas-phase (∼80%) with a carbon yield of ∼29%. Nonanoic, azelaic, and 9-oxonanonoic acids have been quantified in the condensed phase with carbon yields of respectively 6.6%, 5.3%, and 31.4%. The changes in chemical composition induce a slight rise in particle density, whereas the aerodynamic particle diameter increases by 10%. The initial molar quantities of ozone and OL were chosen to obtain different initial stoichiometries in order to explore conditions where either of them is the limiting reactant. Drastic changes in reactivity were observed as a function of the initial stoichiometry. In conditions where OL was the initial limiting reactant, up to a total of four molecules of O3 were lost from the gas phase, whereas only one OL molecule was consumed.

A new flow reactor has been developed to study ozonolysis reactions at ambient pressure and room temperature (297 ± 2 K). The reaction kinetics of O(3) with 4-methyl-1-pentene (4M1P), 2-methyl-2-pentene (2M2P), 2,4,4-trimethyl-1-pentene (tM1P), 2,4,4-trimethyl-2-pentene (tM2P) and α-pinene have been investigated under pseudo-first-order conditions. Absolute measurements of the rate coefficients have been carried out by recording O(3) consumption in excess of organic compound. Alkene concentrations have been determined by sampling adsorbent cartridges that were thermodesorbed and analyzed by gas-chromatography coupled to flame ionization detection. Complementary experimental data have been obtained using a 250 L Teflon smog chamber. The following ozonolysis rate coefficients can be proposed (in cm(3) molecule(-1) s(-1)): k(4M1P) = (8.23 ± 0.50) × 10(-18), k(2M2P) = (4.54 ± 0.96) × 10(-16), k(tM1P) = (1.48 ± 0.11) × 10(-17), k(tM2P) = (1.25 ± 0.10) × 10(-16), and k(α-pinene) = (1.29 ± 0.16) × 10(-16), in very good agreement with literature values. The products of tM2P ozonolysis have been investigated, and branching ratios of (21.4 ± 2.8)% and (73.9 ± 7.3)% have been determined for acetone and 2,2-dimethyl-propanal, respectively. Additionally, a new nonoxidized intermediate, 2-methyl-1-propene, has been identified and quantified. A topological SAR analysis was also performed to strengthen the consistency of the kinetic data obtained with this new flow reactor.