Search

Thermal energy storage (TES) plays an important role in industrial applications with intermittent generation of thermal energy. In particular, the implementation of latent heat thermal energy storage (LHTES) technology in industrial thermal processes has shown promising results, significantly reducing sensible heat losses. However, in order to implement this technology, a proper selection of materials is important. In this study, a new multi-criteria phase change material (PCM) selection methodology is presented, which considers relevant factors from an application and material handling point of view, such as hygroscopicity, metal compatibility (corrosion), level hazard, cost, and thermal and atmospheric stability. The methodology starts after setting up the system requirements where the PCM will be used, then a material screening is able to find all possible candidates that are listed with all available properties as listed before. Then, a color map is produced, with a qualitative assessment of material properties drawbacks, hazard level, melting enthalpy, and price. The experimentation starts with a preliminary set of tests on hygroscopicity and one-week corrosion test, which allows disregarding PCMs and selecting a short list of potential PCMs that would need further characterization before the final selection. [ABSTRACT FROM AUTHOR]

Thermochemical energy storage using salt hydrates is a promising method for the efficient use of energy. In this study, three host matrices, expanded vermiculite, expanded clay, and expanded natural graphite were impregnated with a eutectic mixture of CaCl2·6H2O and bischofite (MgCl2·6H2O). These composites were subjected to various humidity conditions (30–70% relative humidity) at 20 °C over an extended hydration period to investigate their cyclability. It was shown that only expanded natural graphite could contain the deliquescent salt at high humidity over 50 cycles. Hence, the expanded natural graphite composites containing either CaCl2·6H2O or CaCl2·6H2O/bischofite eutectic mixture were placed in a lab-scale open packed bed reactor, providing energy densities of 150 and 120 kWh/m3 over 20 h, respectively. The eutectic composite showed slightly lower temperature lift, water uptake rate, and power output but at reduced cost. Using the eutectic mixture also decreased the composite's dehydration temperature at which the maximum mass loss rate occurred around 16.2 °C to 62.3 °C, allowing recharge using less energy-intensive heating methods. The cost of storing 1 kWh of energy with expanded natural graphite composites is only USD 0.08 due to its stability. This research leveraging cost-effective composites with enhanced stability, reaction kinetics, and high thermal energy storage capabilities benefits renewable energy, power generation, and the building construction research communities and industries by providing a competitive alternative to sensible heat storage technologies. [ABSTRACT FROM AUTHOR]

Despite the structural and electrochemical advantages of LiFePO4 (LFP) as a cathode material, the solid-state reaction commonly used as a method to produce it at the industrial level has known disadvantages associated with high energy and fossil fuel consumption. On the other hand, solution-based synthesis methods present a more efficient way to produce LFP and have advantages such as controlled crystal growth, homogeneous morphology, and better control of pollutant emissions because the reaction occurs within a closed system. From an environmental point of view, different impacts associated with each synthesis method have not been studied extensively. The use of less polluting precursors during synthesis, as well as efficient use of energy and water, can provide new insights into the advantages of each cathode material for more environmentally friendly batteries. In this work, a solvothermal method is compared to a solid-state synthesis method commonly used to elaborate LFPs at the commercial level in order to evaluate differences in the environmental impacts of both processes. The solvothermal method used was developed considering the reutilization of solvent, water reflux, and a low thermal treatment to reduce pollutant emissions. As a result, a single high crystallinity olivine phase LFP was successfully synthesized. The use of ethylene glycol (EG) as a reaction medium enabled the formation of crystalline LFP at a low temperature (600 °C) with a nano-plate-like shape. The developed synthesis method was evaluated using life cycle analysis (LCA) to compare its environmental impact against the conventional production method. LCA demonstrated that the alternative green synthesis process represents 60% and 45% of the Resource Depletion impact category (water and fossil fuels, respectively) of the conventional method. At the same time, in the Climate change and Particular matter impact categories, the values correspond to 49 and 38% of the conventional method, respectively. [ABSTRACT FROM AUTHOR]