Search

Thermo-mechanical controlled processing (TMCP) is employed to obtain the required level of mechanical properties of contemporary HSLA steel plates utilized for gas and oil pipeline production. The strength and crack resistance of pipeline steels are mainly determined by its microstructure and crystallographic texture. In this study, the influence of the structural and textural states of industrially produced API-5L X70-X80 pipeline steels on tensile mechanical properties was analyzed. TMCP routes with different hot rolling temperatures and cooling rates were employed. The texture of steel was assessed using the Taylor factor, which was calculated based on electron backscatter diffraction (EBSD). The decrease in rolling temperature resulted in the sharper texture characterized by {001} planes banding (cleavage planes in the bcc lattice) parallel to rolling direction. The tensile deformation behavior at the stage of necking was determined by the crystallographic and morphological texture of the material and demonstrated significant anisotropy. Rupture of all investigated samples was accompanied by the development of splitting on the fracture surface. The splitting was localized in the rolling plane similar to the splitting in standard Charpy tests of pipeline steels. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.

The texture of low-carbon low-alloy pipe steel sheet with bainitic structure produced by thermomechanical controlled processing (TMCP) is studied by means of electron backscatter diffraction (EBSD). The formation of cleavages during steel failure is related to the presence of ferrite grains with orientation {001}<110> extended in the hot rolling direction. Two possibilities are shown for the formation of regions of easy crack propagation along the product obtained by TMCP. © 2020 American Institute of Physics Inc.. All rights reserved.

The method of orientation microscopy (EBSD) is used to study the structure and texture of low-carbon, low-alloy pipe steel sheets processed by controlled thermomechanical processing (TMCP). The temperatures of isothermal hot rolling varied. Samples cut from sheets showed a different properties during mechanical testing. The formation of cleavages (secondary cracks) during failure of steel is related to the presence of ferrite grains with orientation {001}<110> extended in the hot rolling direction. The formation of grains is a consequence of the isothermal hot rolling below the temperature Ac3 at TMCP. © Published under licence by IOP Publishing Ltd.

The method of orientation microscopy (EBSD) is used to study the structure and texture of low-carbon, low-alloy pipe steel sheets processed by controlled thermomechanical processing (TMCP). The temperatures of isothermal hot rolling varied. Samples cut from sheets showed a different fracture tendency during mechanical testing. The formation of cleavages (secondary cracks) during failure of steel is related to the presence of ferrite grains with orientation {001}<110> extended in the hot rolling direction. The formation of grains is a consequence of the isothermal hot rolling below the temperature Ac3 at TMCP.

An original laboratory bench, which allows for modeling technological rates of cooling of hot-rolled sheets in the process of controlled thermomechanical processing (TMCP) has been designed. Samples cut from an industrial sheet of 06G2MB type pipe steel used in production of large diameter pipes with strength grade X80 have been used. Time dependencies of the actual temperature at initial cooling rates of 100 – 500 K / s have been obtained. All processing modes resulted in almost identical structures mainly formed due to the bainitic transformation. The dispersion of structures decreased with the increase of the cooling rate. Thermotechnical calculations were carried out assuming that the temperature equalization over the sample thickness was instant. The times of transformation amounted to 1 – 9 s. Most of the transformation at all cooling modes occurred in conditions close to the isothermal one. The athermal nature of the bainitic transformation in TMCP was recorded. Within the observed interval of cooling rates, the temperature at the starting point of the bainitic transformation was 660 – 730°C. The heat effect approximately was equal to 120 kJ / kg, which is twice larger than the thermal effect of the martensite transformation for low-carbon steels. This fact suggests that the kinetics of the bainitic transformation is largely determined by the energy of the slowest process, namely, the re-arrangement of carbon atoms in the austenite occurring parallelly to the shear transformation of FCC lattice into BCC one. It is assumed that energy contribution of the redistribution process of carbon atoms (if their amount is small) to the thermal effect of the bainitic transformation is comparable, at least, to the energy effect of the shear lattice rearrangement. © 2018, Institute for Metals Superplasticity Problems of Russian Academy of Sciences. All rights reserved.