Search

Recently, non-fullerene n-type organic semiconductors have attracted significant attention as acceptors in organic photovoltaics (OPVs) due to their great potential to realize high-power conversion efficiencies. The rational design of the central fused ring unit of these acceptor molecules is crucial to maximize device performance. Here, we report a new class of non-fullerene acceptor, Y6, that employs a ladder-type electron-deficient-core-based central fused ring (dithienothiophen[3.2-b]- pyrrolobenzothiadiazole) with a benzothiadiazole (BT) core to fine-tune its absorption and electron affinity. OPVs made from Y6 in conventional and inverted architectures each exhibited a high efficiency of 15.7%, measured in two separate labs. Inverted device structures were certified at Enli Tech Laboratory demonstrated an efficiency of 14.9%. We further observed that the Y6-based devices maintain a high efficiency of 13.6% with an active layer thickness of 300 nm. The electron-deficient-core-based fused ring reported in this work opens a new door in the molecular design of high-performance acceptors for OPVs.

Inkjet printing technique allows manufacturing low cost organic light emitting diodes (OLEDs) in ambient conditions. The above approach enables upscaling of the OLEDs fabrication process which, as a result, would become faster than conventionally used vacuum based processing techniques. In this work, we use the inkjet printing technique to investigate the formation of thin active layers of well-known light emitting polymer material: Super Yellow (poly(para-phenylene vinylene) copolymer). We develop the formulation of Super Yellow ink, containing non-chlorinated solvents and allowing stable jetting. Optimization of ink composition and printing resolution were performed, until good quality films suitable for OLEDs were obtained. Fabricated OLEDs have shown a remarkable characteristics of performance, similar to the OLEDs fabricated by means of spin coating technique. We checked that, the values of mobility of the charge carriers in the printed films, measured by transient electroluminescence, are similar to the values of mobility measured in spin coated films. Our contribution provides a complete framework for inkjet printing of high quality Super Yellow films for OLEDs. The description of this method can be used to obtain efficient printed OLEDs both in academic and in industrial settings.

Recently, non-fullerene n-type organic semiconductors have attracted significant attention as acceptors in organic photovoltaics (OPVs) due to their great potential to realize high-power conversion efficiencies. The rational design of the central fused ring unit of these acceptor molecules is crucial to maximize device performance. Here, we report a new class of non-fullerene acceptor, Y6, that employs a ladder-type electron-deficient-core-based central fused ring (dithienothiophen[3.2-b]- pyrrolobenzothiadiazole) with a benzothiadiazole (BT) core to fine-tune its absorption and electron affinity. OPVs made from Y6 in conventional and inverted architectures each exhibited a high efficiency of 15.7%, measured in two separate labs. Inverted device structures were certified at Enli Tech Laboratory demonstrated an efficiency of 14.9%. We further observed that the Y6-based devices maintain a high efficiency of 13.6% with an active layer thickness of 300 nm. The electron-deficient-core-based fused ring reported in this work opens a new door in the molecular design of high-performance acceptors for OPVs.

The bulk heterojunction based created by poly(3-hexyltiophene-2,5-diyl) (P3HT phenyl-C61-butyric acid methyl ester (C60-PCBM) it is well-known system used in organic solar cells. As the performance of such solar cells are very sensitive to the processing conditions of the active layers, we have focused attention to preaggregation process of P3HT in the aged solutions, which can be one of the reasons behind the different values of the reported efficiencies for this solar cell system. In this work, we present a systematic study of the influence of aging time of solutions mixture of P3HT:C60-PCBM in different solvents on the performance of the photovoltaic cells. The highest efficiency values were obtained from devices based on active layer dissolved in 1,2-dichlorobenzene. These values were stable even after 120 h of aging solutions, which means that the solution ageing process does not affect the final device properties. While, in chloroform and toluene solvents, efficiency of solar cells decreases within aging process. Our processing approach allows to better understanding the relationship between morphology of P3HT:C60-PCBM layer and device performances.

This study presents the inkjet printing of a novel OLED device with fully solution-processed organic layers that employ TADF material as an emitting layer. The ink was formulated using new TADF material, triazine core carbazole dendrimers with tert-butyl group at the periphery (tBuG2TAZ), dissolved in a mixture of two non-chlorinated solvents. The influence of the print resolution and the substrate temperature on morphology of the printed films was studied and optimized in ambient conditions. The optimized TADF dendrimer layer was then incorporated in the OLEDs as the emitting layer. The best-printed OLEDs exhibited a maximum current efficiency of 18 cd/A and maximum luminance of 6900 cd/m(2). Such values are comparable to the values obtained in spin coated devices made of the same TADF dendrimer. Further, the mobility of charge carriers extracted from transient electroluminescence measurements of printed OLEDs, when compared to reference OLEDs made by spin coating technique, showed similar values. Finally, we have demonstrated the possibility of patterning of emission the area of complex shapes merely by selectively printing the emission layer. These results demonstrate the potential application of the new dendrimer TADF emitters for the fabrication of efficient OLEDs by an inkjet printing technique.