Search

Isothermal PCR can be performed by imposing a static temperature gradient that continuously circulates reagents through denaturing, annealing, and extension conditions inside a PCR tube. But despite early promise, these systems have yet to demonstrate performance and repeatability sufficient for adoption in validated laboratory tests because the rate‐limiting extension step is inherently short and cannot be increased independently of the other stages in a temperature cycle. Here, a discovery that enables isothermal PCR to be achieved with statistically robust repeatability that meets or exceeds diagnostic assay requirements (false positive/negative rate <8% at 95% confidence) by manipulating the interplay between the DNA replication biochemistry (via the amplicon GC content) and the microscale circulatory flow inside a PCR tube is reported. Surprisingly, optimal performance depends on selecting primer sequences that replicate high GC content amplicons, contradicting established PCR primer design rules. This innovative thermocycling approach accelerates PCR to speeds rivaling ultra‐fast instruments, enabling rapid, repeatable isothermal DNA analysis across a range of targets relevant to diagnostics and pathogen detection. [ABSTRACT FROM AUTHOR]

Current accurate applications of reflection interference contrast microscopy (RICM) are limited to known geometries; when the geometry of the object is unknown, an approximated fringe spacing analysis is usually performed. To complete an accurate RICM analysis in more general situations, we review and improve the formulation for intensity calculation based on nonplanar interface image formation theory and develop a method for its practical implementation in wedges and convex surfaces. In addition, a suitable RICM model for an arbitrary convex surface, with or without a uniform layer such as a membrane or ultrathin coating, is presented. Experimental work with polymer vesicles shows that the coupling of the improved RICM image formation theory, the calculation method, and the surface model allow an accurate reconstruction of the convex bottom shape of an object close to the substrate by fitting its experimental intensity pattern. [c] 2010 Optical Society of America OCIS codes: 070.5010, 080.2720, 100.2650, 100.3010, 100.6890, 180.3170.

Pulsed field gel electrophoresis (PFGE) methods have become standard tools in a wide range of DNA analysis applications. But many aspects of DNA migration phenomena under pulsed field conditions are not well understood as compared with the more conventional situation where the electric field is held constant. A key reason for this deficiency is that PFGE experiments are cumbersome to perform due to extremely long separation times (~10-15 h) and the need to perform gel analysis by poststaining after completion of the run. Here we introduce an easy to build miniaturized slab gel apparatus that addresses these issues by enabling large DNA fragments up to 35 kb in length to be separated using field inversion gel electrophoresis (FIGE) in 60-90 min. The compact size of the device also allows the entire gel to be continuously monitored so that the separation processes can be imaged in real time using a high-resolution CCD camera. Arbitrary control over the applied voltage waveforms is achieved using a function generator interfaced with a high voltage amplifier. These capabilities allow us to probe the size dependence of fundamental physical parameters associated with DNA migration (mobility, diffusion, and separation resolution). These data reveal a surprising regime where separation resolution increases with DNA fragment size owing to a favorable interplay between mobility and diffusion scalings and highlight the important role of diffusion (a seldom quantified parameter). In addition to the practical benefit of separation times that are an order of magnitude faster than conventional instruments, the results of these studies provide a previously unavailable rational basis to identify optimal separation conditions and contribute new insights toward understanding the underlying physical processes that govern DNA electrophoresis in pulsed fields. 10.1021/ac902490e

We demonstrate the use of thermoplastic elastomer gels as advanced substrates for construction of complex microfluidic networks suitable for use in miniaturized chemical analysis systems. These gels are synthesized by combining inexpensive polystyrene-(polyethylene/polybutylene)-polystyrene triblock copolymers with a hydrocarbon extender oil for which the ethylene/butylene midblocks are selectively miscible. The insoluble styrene end blocks phase separate into localized nanodomains, resulting in the formation of an optically transparent, viscoelastic, and biocompatible gel network that is melt-processable at temperatures in the vicinity of 100 [degrees]C. This unique combination of properties allows microfluidic channels to be fabricated in a matter of minutes by simply making impressions of the negative relief structures on heated master molds. Melt processability allows multiple impressions to be made against different masters to construct complex geometries incorporating multi-height features within the same microchannel. Intricate interconnected multilayered structures are also easily fabricated owing to the ability to bond and seal multiple layers by briefly heating the material at the bond interface. Thermal and mechanical properties are tunable over a wide range through proper selection of gel composition.

Buoyancy-driven convection offers a novel and greatly simplified mechanism for generating continuous nonpulsatile flow fields and performing thermally activated biochemical reactions. In this paper, we build on our previous work by constructing a multiwell device incorporating an array of 35-[micro]L cylindrical cavities to perform polymerase chain reaction (PCR) amplification of a 191-base pair fragment associated with membrane channel proteins M1 and M2 of the influenza-A virus in as tittle as 15 min with performance comparable to conventional thermocyclers. We also describe entirely new adaptations of convective flows by conducting a series of coordinated flow visualization and computational studies to explore the design of closed-loop systems to execute tunable thermocycling, pumping, and mixing operations in a format suitable for integration into miniaturized biochemical analysis systems. Using 15-[micro]L convective flow loops, we are able to perform PCR amplification of the same 191-base pair fragment associated with the influenza-A virus, as well as a 295-base pair segment of the human [beta]-actin gene in a format offering an enhanced degree of control and tunability. These convective flow devices can be further scaled down to nanoliter volumes and are ideally suited as a platform for a new generation of low-power, portable microfluidic DNA analysis systems.

One of the primary advantages of using plastic-based substrates for microfluidic systems is the ease with which devices can be fabricated with minimal dependence on specialized laboratory equipment. These devices are often produced using soft lithography techniques to cast replicas of a rigid mold or master incorporating a negative image of the desired surface structures. Conventional photolithographic micromachining processes are typically used to construct these masters in either thick photo-resist, etched silicon, or etched glass substrates. The speed at which new masters can be produced using these techniques, however, can be relatively slow and often limits the rate at which new device designs can be built and tested. In this paper, we show that inexpensive photosensitized copper clad circuit board substrates can be employed to produce master molds using conventional printed circuit technology. This process offers the benefits of parallel fabrication associated with photolithography without the need for cleanroom facilities, thereby providing a degree of speed and simplicity that allows microfluidic master molds with well-defined and reproducible structural features to be constructed in ~30 min in any laboratory. Precise control of channel heights ranging from 15 to 120 [micro]m can be easily achieved through selection of the appropriate copper layer thickness, and channel widths as small as 50 [mirco]m can be reproducibly obtained. We use these masters to produce a variety of plastic-based microfluidic channel networks and demonstrate their suitability for DNA electrophoresis and microfluidic mixing studies.