Search

The adhesive bonding strength of the membrane layers between the asphalt concrete surface layers and the decks of steel bridges has a strong influence on the fatigue life of orthotropic steel deck bridges (OSDBs). The interfacial properties between the membrane and the layers bonded to it have not been extensively studied in the current orthotropic steel deck bridge system. For the adequate characterisation of the adhesive-bonding strength of various membranes and surrounding materials on OSDBs and for the collection of the necessary parameters for finite element model, details of the membrane adhesion test (MAT) are introduced and simulated by using the adhesive traction-separation interface element which was developed in a companion paper to this contribution (Liu, X., Kasbergen, C., Li, J., & Scarpas, A. (2019). Modelling of membrane bonding response: part 1 development of an adhesive contact interface element. International Journal of Pavement Engineering). Parametric studies of the adhesive contact element utilised for modelling the membrane bonding layer in the MAT test have been performed on the basis of the combination of different critical strain energy release rates and the characteristic opening length in the constitutive model. Comparison of membrane deformation profiles and the in-time debonding force distribution between experimental observations and finite element simulations have been presented. [ABSTRACT FROM AUTHOR]

The orthotropic steel deck bridges (OSDBs) in the Netherlands consists mostly of multilayer system: top porous asphalt layer, guss asphalt layer, steel deck and two membrane layers. The five-point bending (5PB) beam test is the standard device in France for characterization of fatigue response of asphalt concrete surfacings used on orthotropic steel deck bridges. In this paper, an analytical solution for the 5PB beam test setup is presented first. In order to better understand the influence of geometrical, mechanical and structural parameters on the performance of the typical multilayer surfacing system of OSDBs, the 5PB test specimens with five structural layers have been investigated. The parametric study is performed at the numerical platform CAPA-3D that was developed at the Section of Structural Mechanics of TU Delft. The influences of the thickness of the asphalt layers and the mechanical properties of both top and bottom membrane layers are studied. The sensitivities of those influence factors are evaluated by the examination of the maximum tensile stress at the top surface of the porous asphalt layers and the strain distributions through the entire thickness of the specimen at two cross-sections. [ABSTRACT FROM AUTHOR]