Search

Background: Outcomes from cardiopulmonary resuscitation (CPR) following sudden cardiac arrest are suboptimal. Postresuscitation targeted temperature management has been shown to have benefit in subjects with sudden cardiac arrest due to ventricular fibrillation, but there are few data for outcomes from sudden cardiac arrest due to pulseless electrical activity. In addition, intra-CPR cooling is more effective than postresuscitation cooling. Physical cooling is associated with increased protein kinase B activity. Therefore, our group developed a novel peptide, TAT-PHLPP9c, which regulates protein kinase B. We hypothesized that when given during CPR, TAT-PHLPP9c would improve survival and neurologic outcomes following pulseless electrical activity arrest., Methods and Results: In 24 female pigs, pulseless electrical activity was induced by inflating balloon catheters in the right coronary and left anterior descending arteries for ≈7 minutes. Advanced life support was initiated. In 12 control animals, epinephrine was given after 1 and 3 minutes. In 12 peptide-treated animals, 7.5 mg/kg TAT-PHLPP9c was also administered at 1 and 3 minutes of CPR. The balloons were removed after 2 minutes of support. Animals were recovered and neurologically scored 24 hours after return of spontaneous circulation. Return of spontaneous circulation was more common in the peptide group, but this difference was not significant (8/12 control versus 12/12 peptide; P =0.093), while fully intact neurologic survival was significantly more common in the peptide group (0/12 control versus 11/12 peptide; P <0.00001). TAT-PHLPP9c significantly increased myocardial nicotinamide adenine dinucleotide levels., Conclusions: TAT-PHLPP9c resulted in improved survival with full neurologic function after sudden cardiac arrest in a swine model of pulseless electrical activity, and the peptide shows potential as an intra-CPR pharmacologic agent.

Worldwide, population aging and unhealthy lifestyles have increased the incidence of high-risk health conditions such as cardiovascular diseases, sleep apnea, and other conditions. Recently, to facilitate early identification and diagnosis, efforts have been made in the research and development of new wearable devices to make them smaller, more comfortable, more accurate, and increasingly compatible with artificial intelligence technologies. These efforts can pave the way to the longer and continuous health monitoring of different biosignals, including the real-time detection of diseases, thus providing more timely and accurate predictions of health events that can drastically improve the healthcare management of patients. Most recent reviews focus on a specific category of disease, the use of artificial intelligence in 12-lead electrocardiograms, or on wearable technology. However, we present recent advances in the use of electrocardiogram signals acquired with wearable devices or from publicly available databases and the analysis of such signals with artificial intelligence methods to detect and predict diseases. As expected, most of the available research focuses on heart diseases, sleep apnea, and other emerging areas, such as mental stress. From a methodological point of view, although traditional statistical methods and machine learning are still widely used, we observe an increasing use of more advanced deep learning methods, specifically architectures that can handle the complexity of biosignal data. These deep learning methods typically include convolutional and recurrent neural networks. Moreover, when proposing new artificial intelligence methods, we observe that the prevalent choice is to use publicly available databases rather than collecting new data.

Recent advancements in smart, wearable technologies have allowed the detection of various medical conditions. In particular, continuous collection and real-time analysis of electrocardiogram data have enabled the early identification of pathologic cardiac rhythms. Various algorithms to assess cardiac rhythms have been developed, but these utilize excessive computational power. Therefore, adoption to mobile platforms requires more computationally efficient algorithms that do not sacrifice correctness. This study presents a modified QRS detection algorithm, the AccYouRate Modified Pan-Tompkins (AMPT), which is a simplified version of the well-established Pan-Tompkins algorithm. Using archived ECG data from a variety of publicly available datasets, relative to the Pan-Tompkins, the AMPT algorithm demonstrated improved computational efficiency by 5-20×, while also universally enhancing correctness, both of which favor translation to a mobile platform for continuous, real-time QRS detection.

Competing Interests: Competing interests:The BMJ has judged that there are no disqualifying financial ties to commercial companies. The authors declare the following other interests: none. Further details of The BMJ policy on financial interests is here: https://www.bmj.com/about-bmj/resources-authors/forms-policies-and-checklists/declaration-competing-interests

Background: On-demand preexposure prophylaxis may reduce one's risk of HIV acquisition; however, it is unclear if individuals with a very low frequency of HIV exposures are conferred adequate protection. We evaluated a novel approach dubbed HIV postexposure prophylaxis-in-pocket ("PIP"), for individuals with a low frequency of high-risk HIV exposures., Setting: Two HIV clinics in Toronto, Canada, managing HIV prevention cases., Methods: A retrospective evaluation of patients referred to HIV clinics for preexposure prophylaxis between January 1, 2013, and September 30, 2017, inclusive. After counseling and education, selected patients were initiated on PIP if they were having very infrequent HIV exposures., Results: Thirty patients were prescribed PIP. Four patients (13.3%) used PIP during this study. There were no HIV seroconversions in 21.8 cumulative patient-years of PIP., Conclusions: PIP may be a useful HIV prevention modality for individuals with a very low frequency of HIV exposures.

To develop an understanding of the nature of complex, spatiotemporal interactions between cells and the extracellular matrix (ECM), artificial ECMs formed from hydrogels with a particular spectrum of properties are being developed at a rapid pace. We report the microfluidic generation of small, monodisperse composite agarose-gelatin hydrogel modules (microgel particles) that can be used for cell encapsulation and can serve as instructive cellular microenvironments. The agarose component of the microgels gelled under reduced temperature, while gelatin modified with phenolic hydroxyl groups underwent peroxidase-catalyzed gelation. Microgel composition, structure, morphology, and rigidity were tuned in a high-throughput manner. The results of this work are important for the generation of libraries of cell-laden polymer microgels for single-cell analysis, tissue engineering, and fundamental studies of the role of local microenvironments in cell fate.

Microfluidics (MFs) offers a promising method for the preparation of polymer microgels with exquisite control over their dimensions, shapes and morphologies. A challenging task in this process is the generation of droplets (precursors for microgels) from highly viscous polymer solutions. Spatial separation of MF emulsification and gelation of the precursor droplets on chip can address this challenge. In the present work, we explored the application of the "direct injection" method for the preparation of microgels by adding a highly concentrated polymer solution or a gelling agent directly into the precursor droplets. In the first system, primary droplets were generated from a dilute aqueous solution of agarose, followed by the injection of the concentrated agarose solution directly in the primary droplets. The secondary droplets served as precursors for microgels. In the second system, primary droplets were generated from the low-viscous solution of methyl-β-cyclodextrin and poly(ethylene glycol) end-terminated with octadecyl hydrophobic groups. Addition of surfactant directly into the primary droplets led to the binding of methyl-β-cyclodextrin to the surfactant, thereby releasing hydrophobized poly(ethylene glycol) to form polymer microgels. Our results show that, when optimized, the direct injection method can be used for microgel preparation from highly viscous liquids and thus this method expands the range of polymers used for MF generation of microgels.

In this Concept article, recent advances in microfluidic platforms for the generation of cell-laden hydrogel particles (microgels) are reported. Advances in the continuous microfluidic encapsulation of cells in droplets and microgels are critically reviewed, and currently used methods for the encapsulation of cells in polymer microgels are discussed. An outlook on current applications and future directions in this field of research are also presented. This article will be of interest to chemists, materials scientists, cell biologists, bioengineers, and pharmacologists., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We demonstrate continuous flow acid-base titration reactions as an educational microfluidic platform for undergraduate and graduate analytical chemistry courses. A series of equations were developed for controlling and predicting the results of acid-base neutralisation reactions conducted in a microfluidic format, including the combinations of (i) a strong base and a strong acid, (ii) a strong base and a weak acid, and (iii) a strong base and a multiprotic acid. Microfluidic titrations yielded excellent repeatability. The small experimental footprint is advantageous in crowded teaching laboratories, and it offers limited waste and exposure to potentially hazardous acids and bases. This platform will help promote the utilisation of microfluidics at an earlier stage of students' careers.

We report the development of a versatile microfluidic (MF) reactor with multiple analytical probes, which can be used for (i) quantitative characterisation of molecular vibrational signatures of reactants or products, (ii) the localised real-time monitoring of temperature and (iii) site-specific measurements of pH of the reaction system. The analytical probes utilised for in situ reaction analysis include an ATR-FTIR probe, a temperature probe, and a pH probe. We demonstrate the applications of the MF reactor with integrated probes for the parallel monitoring of multiple variables in acid/base neutralisation reaction, of changes in buffer pH, temperature, and vibrational absorption bands, and for monitoring the kinetics of the reaction between CO(2) and a buffer system with therapeutic applications.

This communication describes a novel strategy for the continuous microfluidic generation of highly monodispersed particle-coated microbubbles using temperature-dependent dissolution of carbon dioxide.

We report a microfluidic (MF) approach to studies of temperature mediated carbon dioxide (CO(2)) transfer between the gas and the liquid phases. Micrometre-diameter CO(2) bubbles with a narrow size distribution were generated in an aqueous or organic liquid and subsequently were subjected to temperature changes in the downstream channel. In response to the cooling-heating-cooling cycle the bubbles underwent corresponding contraction-expansion-contraction transitions, which we term 'bubble breathing'. We examined temperature-controlled dissolution of CO(2) in four exemplary liquid systems: deionized water, a 0.7 M aqueous solution of NaCl, ocean water extracted from Bermuda coastal waters, and dimethyl ether of poly(ethylene glycol), a solvent used in industry for absorption of CO(2). The MF approach can be extended to studies of other gases with a distinct, temperature-dependent solubility in liquids.

Co-culture strategies are foundational in cell biology. These systems, which serve as mimics of in vivo tissue niches, are typically poorly defined in terms of cell ratios, local cues and supportive cell-cell interactions. In the stem cell niche, the ability to screen cell-cell interactions and identify local supportive microenvironments has a broad range of applications in transplantation, tissue engineering and wound healing. We present a microfluidic platform for the high-throughput generation of hydrogel microbeads for cell co-culture. Encapsulation of different cell populations in microgels was achieved by introducing in a microfluidic device two streams of distinct cell suspensions, emulsifying the mixed suspension, and gelling the precursor droplets. The cellular composition in the microgels was controlled by varying the volumetric flow rates of the corresponding streams. We demonstrate one of the applications of the microfluidic method by co-encapsulating factor-dependent and responsive blood progenitor cell lines (MBA2 and M07e cells, respectively) at varying ratios, and show that in-bead paracrine secretion can modulate the viability of the factor dependent cells. Furthermore, we show the application of the method as a tool to screen the impact of specific growth factors on a primary human heterogeneous cell population. Co-encapsulation of IL-3 secreting MBA2 cells with umbilical cord blood cells revealed differential sub-population responsiveness to paracrine signals (CD14+ cells were particularly responsive to locally delivered IL-3). This microfluidic co-culture platform should enable high throughput screening of cell co-culture conditions, leading to new strategies to manipulate cell fate., (This journal is © The Royal Society of Chemistry 2011)

Further progress in the applications of self-assembled nanostructures critically depends on developing a fundamental understanding of the relation between the properties of nanoparticle ensembles and their time-dependent structural characteristics. Following dynamic generation of hot-spots in the self-assembled chains of gold nanorods, we established a direct correlation between ensemble-averaged surface-enhanced Raman scattering and extinction properties of the chains. Experimental results were supported with comprehensive finite-difference time-domain simulations. The established relationship between the structure of nanorod ensembles and their optical properties provides the basis for creating dynamic, solution-based, plasmonic platforms that can be utilized in applications ranging from sensing to nanoelectronics., (© 2011 American Chemical Society)

Elasticity of cellular microenvironments strongly influences cell motility, phagocytosis, growth and differentiation. Currently, the relationship between the cell behaviour and matrix stiffness is being studied for cells seeded on planar substrates, however in three-dimensional (3D) microenvironments cells may experience mechanical signalling that is distinct from that on a two-dimensional matrix. We report a microfluidic approach for high-throughput generation of 3D microenvironments with different elasticity for studies of cell fate. The generation of agarose microgels with different elastic moduli was achieved by (i) introducing into a microfluidic droplet generator two streams of agarose solutions, one with a high concentration of agarose and the other one with a low concentration of agarose, at varying relative volumetric flow rate ratios of the two streams, and (ii) on-chip gelation of the precursor droplets. At 37 degreesC, the method enabled a approximately 35-fold variation of the shear elastic modulus of the agarose gels. The application of the method was demonstrated by encapsulating two mouse embryonic stem cell lines within the agarose microgels. This work establishes a foundation for the high-throughput generation of combinatorial microenvironments with different mechanical properties for cell studies., (2010. Published by Elsevier Ltd. All rights reserved.)

A microfluidic route to producing small (<10 µm) bubbles with a narrow size distribution and long-time (at least, up to one month) stability is reported. The bubbles are encapsulated with a protein-polysaccharide shell. The strategy includes the following events, occurring in sequence: (i) a microfluidic generation of bubbles from a mixture of CO(2) and a minute amount of gases with low solubility in water, in an aqueous solution of lysozyme and sodium alginate; (ii) the dissolution of CO(2) leading to the shrinkage of bubbles and a local increase in acidity of the medium; (iii) the deposition of lysozyme at the gas-water interface triggered by the local decrease in pH; (iv) the deposition of alginate onto the lysozyme shell, due to the electrostatically driven complexation of alginate with lysozyme., (Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In this tutorial review we discuss recent advances in the application of microfluidics for the generation of microgels from synthetic and biological polymers. We summarize advantages and drawbacks of the current methods used in microfluidic synthesis and assembly of polymer microgels. Continuous microfluidic encapsulation of cells is discussed as an exemplary application of the microgels. The article is finalized with a perspective on future research in the field. The article will be of interest to chemists, cell biologists, pharmacologists, and medicinal chemists.

We report a microfluidic approach to generating capsules of biopolymer hydrogels. Droplets of an aqueous solution of a biopolymer were emulsified in an organic phase comprising a cross-linking agent. Polymer gelation was achieved in situ (on a microfluidic chip) by diffusion-controlled ionic cross-linking of the biopolymer, following the transfer of the cross-linking agent from the continuous phase to the droplets. Gelation was quenched by collecting particles in a large pool of cross-linking agent-free liquid. The structure of microgels (from capsules to gradient microgels to particles with a uniform structure) was controlled by varying the time of residence of droplets on the microfluidic chip and the concentration of the cross-linking agent in the continuous phase. We demonstrated the encapsulation of a controlled number of polystyrene beads in the microgel capsules. The described approach was applied to the preparation of capsules of several polysaccharides such as alginate, kappa-carrageenan, and carboxymethylcellulose.