Search

Microplastics (MPs) and nanoplastics (NPs) pervade both the environment and the food chain, originating from the degradation of plastic materials from various sources. Their ubiquitous presence raises concerns for ecosystem safety, as well as the health of animals and humans. While evidence suggests their infiltration into mammalian and human tissues and their association with several diseases, the precise toxicological effects remain elusive and require further investigation. MPs and NPs sample preparation and analytical methods are quite scattered without harmonized strategies to exist at the moment. A significant challenge lies in the limited availability of methods for the chemical characterization and quantification of these contaminants. MPs and NPs can undergo further degradation, driven by abiotic or biotic factors, resulting in the formation of cyclic or linear oligomers. These oligomers can serve as indicative markers for the presence or exposure to MPs and NPs. Moreover, recent finding concerning the aggregation of oligomers to form NPs, makes their analysis as markers very important. Recent advancements have led to the development of sensitive and robust analytical methods for identifying and (semi)quantifying these oligomers in environmental, food, and biological samples. These methods offer a valuable complementary approach for determining the presence of MPs and NPs and assessing their risk to human health and the environment., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)

Polyphenol partitioning during mechanical (cold-pressing) and physiological (digestion) extraction at the individual polyphenol and subclass level was investigated. UHPLC-ESI-QTOF-MS/MS analysis yielded a comprehensive identification of 45 polyphenols whose semi-quantification revealed a hierarchical clustering strongly determined by polyphenol structure and their location within the apple tissue. For instance, pomace retained most flavonols and flavanols (degree of polymerization DP 5-7), which were highly hydrophobic, hydroxylated, or large (>434 Da), and more abundant in peel. In vitro digestion UHPLC-ESI-QTOF-MS/MS analysis of whole apple (and its corresponding matrix-free extract) clustered polyphenols into five main groups according to their interaction with plant cell walls (PCWs) during each digestion phase. This grouping was not reproduced in pomace, which exhibited a greater matrix effect than whole apple during oral and gastric digestion. Nevertheless, the interaction between most polyphenol groups, including dihydrochalcones, flavanols (DP 1-4) and hydroxycinnamic acid derivatives, and pomace PCWs was lost during intestinal digestion., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Mario M. Martinez reports financial support was provided by Independent Research Fund Denmark. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

The chemical safety of representative polysaccharide films made with pea starch, organocatalytic acetylated pea starch and pectin was investigated at different migration conditions (20 °C/10 days, 70 °C/2 h) using two official simulants signifying hydrophilic (simulant A, 10% ethanol) or lipophilic (simulant D1, 50% ethanol) foods. Migrating semi-volatile and non-volatile compounds were identified and semi-quantified by ultra-high performance liquid chromatography-trap ion mobility time-of-flight mass spectrometry (UHPLC-TIMS-TOF-MS/MS), whereas their toxicity was evaluated by in silico models based on qualitative structure activity (QSAR). Physicochemical analysis revealed polymer wash-off into the simulants. Migration testing at 70 °C for 2 h using simulant D1 resulted in detectable concentrations of glycerol (≤72.1 mg/kg), monoacetylated maltose (≤6.5 mg/kg), and dibutyl phthalate (DBP) (≤0.5 mg/kg, compliant with the existing legislative migration limits) in samples containing acetylated starch. Migrating 3-β-galactopyranosyl glucose (≤8.9 mg/kg) and 2,5-diketo-d-gluconic acid (≤4.9 mg/kg) were detected at 20 °C/10 days. In-silico toxicity emphasized no significant toxicity and categorized organocatalytic acetylated pea starch of no safety concern., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Mario M. Martinez reports financial support was provided by Aarhus University Research Foundation., (Copyright © 2023 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

There is an emerging interest in evaluating the presence of microplastic (MP) and nanoplastic (NP) residues in food. Despite their potential threat to human health, there is still a need for harmonized methods to evaluate and quantify their presence. Incomplete polymerization may occur during the production of plastic. Conversely, oligomers are formed during chemical, mechanical, or enzymatic depolymerization. Oligomers are a few nanometers in size. Recent advances in analytical chemistry have enabled the quantification and identification of these oligomers in various complex biological matrices. Therefore, we propose that the specific nanosized oligomers can be considered markers for the presence of MPs/NPs. This advance may facilitate a broader perspective for the assessment of MPs/NPs exposure, leading to the evaluation of food safety and associated risks to humans., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Tsochatzis, Theodoridis and Corredig.)

Polyesters (PES) and polystyrene (PS) are among the most used plastics in the production of food contact materials (FCM). The existence of compounds that could migrate from these materials into food requires a constant analytical control to ensure the safety of consumers due to consumption. It also implies a significant research challenge for their identification and quantification. One of the most important groups of known FCM migrants are the substances known as oligomers. PES and PS oligomers have long been suspected to possess some toxicological effects. The International Agency for Research on Cancer and the European Food Safety Authority alerted recently to the potential carcinogenicity of styrene, with its oligomers consequently being also in the spotlight. At the same time, PES cyclic oligomers are categorized as having Cramer III toxicity. Many recent works on the occurrence of poly(ethylene terephthalate) (PET), poly(butylene terephthalate) (PBT), and PS oligomers in FCM and food have been published. The oligomeric chemical analysis requires the use of demanding analytical strategies to address their different physicochemical characteristics (melting points, octanol/water partition coefficients, and solubility properties). Chromatographic methods are normally preferred due to the intrinsic complexity of the target matrices, but the reduced amount of reliable analytical standards still hinders the widespread screening analysis of oligomers in food. This work presents the most relevant recent studies and analytical methodologies used in the analysis of PET, PBT, and PS oligomers in food and FCM, as well as current and future challenges.

The present study reports the biodegradation of polystyrene (PS) by mealworm (Tenebrio molitor) following different feeding regimes. Changes in lipids and protein were studied to evaluate possible differences in the growth and metabolic pathways of the insects depending on the diets. Thermo-gravimetric analysis of the excretions (frass) revealed a decrease in the molecular mass of the PS polymers. The insects' biomass contained less protein when PS was part of the diet, suggesting that the insects undergo a certain level of stress compared to control diets. The frass also contained lower amount of nitrogen content compared to that from insects fed a control diet. NH 4 + and other cations involved in biochemical processes were also measured in insects' frass, including potassium, sodium, magnesium, and calcium, combined with a small pH change. The decrease in the mineral content of the frass was attributed to increased cellular activity in PS-fed insects. A higher amount of ceramides and cardiolipins, biomarkers of apoptosis, were also found in association with PS consumption. It was concluded that the insects could metabolize PS, but this caused an increase in its stress levels., (Copyright © 2022 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

The raising consumer demand for plant-derived proteins has led to an increased production of alternative protein ingredients with varying processing histories. In this study, we used a commercially available potato protein ingredient with a nutritionally valuable amino acid profile and high technological functionality to evaluate if the digestibility of a suspension with the same composition is affected by differences in the structure. Four isocaloric (4% protein, w / w ) matrices (suspension, gel, foam and heat-set foam) were prepared and their gastrointestinal fate was followed utilizing a semi-dynamic in vitro digestion model. The microstructure was observed by confocal laser scanning microscopy, protein breakdown was tested by electrophoresis and free amino acids after intestinal digestion was estimated using liquid chromatography/triple-quadruple-mass spectrometry (LC-TQMS). The heat-treated samples showed a higher degree of hydrolysis and lower trypsin inhibitory activity than the non-heat-treated samples. An in vitro digestible indispensable amino acid score was calculated based on experimental data, showing a value of 0.9 based on sulfur amino acids/valine as the limiting amino acids. The heated samples also showed a slower gastric emptying rate. The study highlights the effect of the food matrix on the distribution of the peptides created during various stages of gastric emptying.

A simple and fast method was developed for the simultaneous determination of 75 plastic food contact material (FCM) in liquid food simulants, at levels of a few ng g -1 . The method employs an optimised salt-assisted liquid-liquid extraction for all EU-regulated ethanol/H 2 O food simulants, in the presence of 10% NaCl (simulants A and C) or 5% NaCl (simulant D1), and dichloromethane as the extracting solvent. Gas chromatography with triple-quad MS operating in multiple reaction monitoring acquisition was used, applying isotope dilution with selected deuterated compounds. Adequate sensitivity was demonstrated for all analytes. The results also showed sufficient accuracy for the majority of substances, with recoveries of 70-120% and repeatability (expressed as relative standard deviations, RSDs) smaller than 15%. The method was applied to the analysis of FCM multilayer items after undergoing migration testing according to the specifications of the current EU legislation in force., (Copyright © 2021 The Author(s). Published by Elsevier Ltd.. All rights reserved.)

The present study investigated the biodegradation of polystyrene (PS) plastic by mealworm (Tenebrio molitor) on different diets followed by untargeted screening of larvae gut intestine tissue and frass (manure and feed residuals) to investigate the existence of polymer-generated organic residues. Three different diets, consisting of PS, rolled barley and water were tested. PS degradation rates ranged from 16% to 23% within 15 days, with no statistical differences in survival rates. The larvae fed with ad libitum barley:PS (20:1 w/w) and water had the highest growth rate, while higher PS consumption was observed for barley:PS of 4:1 w/w. A GC-TOF-MS analysis revealed no contaminating substances in the gut intestine tissue, nor styrene or PS oligomers, whilst several bioactive compounds and traces of alkanes, mostly with small carbon chains, were present. Metabolomics analysis on the collected frass, either on the lipophilic (CHCl 3 ) or the polar fraction (MeOH-H 2 O) was performed. Styrene and PS oligomers (dimers, trimers) were identified, though in a relatively low total amount, up to a total of 346.0 ng/mg 2,4 di-tert butylphenol was identified in both frass and tissue, coming from the PS polymer (Non-intentionally added substances; NIAS). Finally, in the polar fraction of frass, bioactive molecules (fatty acids, amides) were identified, together with several hydrocarbons, mostly with longer carbon chains. The formation of these substances indicated enzymatic and biochemical activity in the larvae-gut intestine. It was shown that degrading and contaminating organic compounds occur at low levels, in both gut intestine and frass, during bio-degradation of PS., (Copyright © 2021 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Thermal processes are widely used in small molecule chemical analysis and metabolomics for derivatization, vaporization, chromatography, and ionization, especially in gas chromatography mass spectrometry (GC/MS). An optimized derivatization protocol has been successfully applied using multiple isotope labelled analytical internal standards of selected deuterated and 13 C selected compounds, covering a range of different groups of metabolites for non-automated GC metabolomics (off-line). Moreover, the study was also realized in a pooled urine sample, following metabolic profiling. A study of thermal degradation of metabolites due to GC inlet and oven programs (fast, slow) was performed, where the results indicated that both GC oven programs (fast and slow) negatively affected the thermal stability of the metabolites, while the fast-ramp GC program also suppressed MS signals. However, the use of multiple internal standards can overcome this drawback. The application of extended temperature ramp GC program presented identical behaviour on metabolite stability and better chromatographic separation combined with much lower signal suppression, compared to a short temperature ramp program. No effects were observed for organic acids, fatty acids, sugars and sugar alcohols, while significant differences were observed for amino acids. GC metabolomics is a strong tool that can facilitate analysis, but special attention is required for sampling handling and heating, before and during the GC analysis. The use and application of multiple multi-group internal standards is highly recommended., (Copyright © 2021 The Author(s). Published by Elsevier B.V. All rights reserved.)

An Ultra High-Performance Liquid chromatography method quadruple time-of-flight mass spectrometry has been developed for the analysis of 11 cyclic polyesters oligomers, following a modified QuEChERS clean-up with alumina/primary secondary amine, in pasta. Target analytes were polyethylene terephthalate (PET) 1 st series cyclic dimer to heptamer, polybutylene terephthalate (PBT) dimer to pentamer and a polyurethane oligomer. Standard addition method was applied for the calibration, and the limits of quantification ranged from 3.2 to 17.2 ng g -1 . Recoveries ranged from 86.4 to 109.8%, RSDs were lower than 12% for all analytes, and matrix effect never exceeded ± 2.5%. The method was successfully applied to real commercial pasta samples, where the PET 1 st series cyclic trimer was the most abundant oligomer, being found in all tested samples. The 1 st series PET cyclic dimer and tetramer, as well as 1,4,7-trioxacyclotridecane-8,13-dione, were found in considerable amounts. Traces of the 2 nd and 3 rd series PET cyclic dimers were also found., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

A HPLC-UV/FLD method was validated for the quantification of six polyethylene terephthalate (PET) and four polybutylene terephthalate (PBT) oligomers. PBT oligomers are EU regulated, while the PET ones are considered non-intentionally added substances (NIAS). LOQs were higher than 0.4 and 3.5 μg kg -1 for the simulants and in the polymer extracts, respectively. Recoveries ranged from 95 to 114 % with RSDs below 12%. Migration testing of PBT and polypropylene coffee capsules were performed with H 2 O and simulant C, and extracts were obtained with accelerated solvent extraction (ASE). For the latter legislative limits weren't surpassed. As no migration limits are existing for the analytes, both EFSA's toxicological threshold of concern (TTC) and sum of oligomers approaches were applied. The majority of oligomers were below the TTC (90 µg/person/day), but the limit value of 50 µg/kg food was surpassed for some capsules, which indicates a significant intake in both single and multiple consumption., (Copyright © 2020 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Food contact materials (FCM) are defined as the objects and materials intended to come into direct or indirect contact with foodstuff, while food contact articles are defined as objects, being equipment, containers, packaging and various utensils which are clearly intended to be used for the manufacture, preparation, conservation, flow, transport or handling of foodstuffs [...].

The rapid diffusion of new psychoactive substances (NPS) presents unprecedented challenges to both customs authorities and analytical laboratories involved in their detection and characterization. In this study an analytical approach to the identification and structural elucidation of a novel synthetic cannabimimetic, quinolin-8-yl-3-[(4,4-difluoropiperidin-1-yl) sulfonyl]-4-methylbenzoate (2F-QMPSB), detected in seized herbal material, is detailed. An acid precursor 4-methyl-3-(4,4-difluoro-1-piperidinylsulfonyl) benzoic acid (2F-MPSBA), has also been identified in the same seized material. After extraction from the herbal material the synthetic cannabimimetic, also referred to as synthetic cannabinoid receptor agonists or "synthetic cannabinoids", was characterized using gas chromatography-mass spectrometry (GC-MS), 1 H, 13 C, 19 F and 15 N nuclear magnetic resonance (NMR) and high-resolution tandem mass spectrometry (HR-MS/MS) combined with chromatographic separation. A cheminformatics platform was used to manage and interpret the analytical data from these techniques.

Caprolactam and 2,4-di-tert-butyl phenol (2,4-DTBP) are substances typically found in some food contact materials (FCMs). They are known to often migrate into food, and are difficult to analyse in liquid food simulants using GC. In this work a simple salting-out Liquid-Liquid Extraction (SALLE) for the analysis of both substances in water and the official food simulant A (10 % v/v ethanol, Regulation (EU) No. 10/2011) is presented. The method, which included analytical determination by GC-MS, was optimized and validated to ensure sufficient analytical quality. The method's LOQs allowed the proper quantification of caprolactam at its EU legislative limit (15 mg kg -1 ). For 2,4-DTBP the method also revealed good sensitivity, although no official limits have been established yet. Linear regression coefficients (R 2 ) were in all cases higher than 0.999, and recoveries ranged from 87 % and 95% for caprolactam and 2,4-DTBP, respectively. Precision was also acceptable, with the RSDs (%) below 12 %. The method proved to be adequate to be used for routine analysis. The presence of salt during migration of caprolactam and 2,4-DTBP was also investigated in this work. Polyamide/polyethylene FCM multilayer films have been tested with water and simulant A, containing different amounts of NaCl (up to 15 % m/v), and applying different migration conditions (temperature and time). The results indicated that salinity plays an important effect on the migration of caprolactam, with the presence of salt reducing its migration in case of water and increasing it in case of simulant A. These preliminary results seem to indicate that migration testing should consider not only the well-known fatty content of a food, but also its salinity content, as it may end up affecting drastically the migration of polar substances., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

A simple, fast, sensitive and reliable method was developed for the simultaneous determination of 13 food contact materials (FCM) regulated substances and non-intentionally added substances (NIAS) migrating into official food simulants. The method has been optimized to quantify the monomers styrene and α-methyl styrene, selected polystyrene oligomers (dimers, trimers) and polyester urethane-based oligomers (PU) cyclic oligomers, as well as cyclic NIAS originating from food packaging such as 2,6-Di-tert-butylbenzoquinone and 7,9-Di-tert-butyl-1-oxaspiro(4,5)deca-6,9-diene-2,8-dione. The method employs liquid-liquid extraction of aqueous ethanol food simulants with dichloromethane, and analysis with gas chromatography coupled to mass spectrometry (GC-MS) with a total analysis time of less than 16 min, with limits of detections ranging from 0.32 ng mL -1 (1,1-diphenyl-ethylene) to 14.8 ng mL -1 for 7,9-di-tert-butyl-1-oxaspiro[4.5]deca-6,9-diene-2,8-dione and respective limits of quantification from 1.0 ng mL -1 to 41.7 ng mL -1 , for the same analytes. Accuracy and precision results showed that the method is sufficiently accurate for all target analytes, with recoveries ranging between 80 and 110% and relative standard deviations (RSDs) smaller than 16% at the three selected concentration levels. The method has been successfully applied to seven FCM. Results indicated that significant amounts of polystyrene monomers, dimers and trimers are migrating into food simulants; this is also the case for polyester urethane-based oligomers (PU). Exposure assessment estimation was performed using EFSA's approach on the total sum of migrating oligomers. In certain cases, amounts of PS and PU oligomers found to be in some cases higher than the respective limits, for the sum of oligomers with a MW lower than 1000 Da., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Chemical substances shall not migrate from food contact materials (FCM) at levels that are potentially harmful for the consumers. Each of the current analytical methods applied to verify the migration of substances from FCM covers only one or few substances. There is a very limited number of publications on the development of analytical methods allowing the simultaneous determination of several classes of FCM substances, and almost none of them reported methods entirely dedicated to the ones in the positive list of Commission Regulation (EU) No. 10/2011 for plastic FCMs. Therefore, a simple, sensitive and reliable multi-analyte method was developed for the analysis of FCM substances in food simulants. It employs an optimised liquid-liquid extraction with dichloromethane as extraction solvent in the presence of 10% m/v NaCl, followed by quantitative analysis with gas chromatography coupled to mass spectrometry (GC-MS). A combination of total ion chromatograms (TICs) and extracted ion chromatograms (EICs) was used. The optimisation and validation of the method have been carried out according to current international guidelines. Adequate sensitivity was demonstrated in the selected concentration ranges for most of the analytes, with limits of quantification (LOQs) at least three times lower than the legislative limit, when existing. The results showed that the method is sufficiently accurate for the majority of substances, with recoveries between 70 and 115% and relative standard deviations (RSDs) smaller than 20% at three concentration levels. The method was applied to the analysis of some FCM multilayers. The method allows, for the first time, the simultaneous quantification of 84 FCM substances in two of the official food simulants (A and C) at levels of a few ng g -1 . Graphical abstract.

Determination of polyethylene terephthalate (PET) dimer up to heptamer 1st series cyclic oligomers, applying an LC-qTOF-MS method, has been developed and validated. Recoveries ranged between 80 and 112% with RSDs lower than 15%. An innovative semi-quantitative approach has been applied for 2nd and 3rd series cyclic oligomers, using the closest structural-similar 1st series cyclic oligomer standard as analytical reference. Oligomers from the three series were quantified in PET teabags after migration experiments with water and food simulants C (20% v/v ethanol in water) and D1 (50% v/v ethanol in water). No legal migration limits exist currently for these substances. In silico genotoxicity assessment of all identified oligomers has been performed and showed no genotoxicity alert for linear or cyclic molecules. Exposure assessment was performed using EFSA's approach on the total sum of migrating oligomers and on toxicological threshold-of-concern. Amounts found in water were in some cases significantly higher than the respective limits, especially in the worst-case scenario of multiple consumption., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The outcome of a proficiency test (PT) organised by the European Union Reference Laboratory for Food Contact Materials (EURL-FCM) is presented. The PT was set up to assess the analytical performance of National Reference Laboratories (NRLs) and Official Control Laboratories (OCLs) in the determination of mass fractions of polyethylene terephthalate (PET) and polybutylene terephthalate (PBT) cyclic dimers and trimers in the official food simulant D1 containing ethanol and water (50:50 v/v). The EURL-FCM had developed and validated an analytical method based on HPLC-UV to monitor the homogeneity and stability of the target oligomers in the PT test items and to determine the respective assigned values, as prescribed in ISO 17043, 2010ISO 17043, 2010. The standard operating procedure of the method was provided to the participants and could be used instead of their own routine methods. Laboratory results were rated using z, z' and ζ scores in accordance with ISO 13528, 2015. The standard deviation for proficiency assessment, σ pt , was set to 20 % of the respective assigned value, for all the four studied oligomers, based on the perception of experts. A total of 36 participants from 26 countries have registered to the exercise. They received two test items. Solution 1 consisted of food simulant D1 fortified with a known mass fraction of the four oligomers, while Solution 2 was obtained by a migration experiment with PET bottles and food simulant D1 and further fortification of the resulting solution with the four oligomers. The majority of the participating laboratories presented satisfactory results for the four PET and PBT oligomers. For the analysis of Solution 1, 79-88 % of the participants obtained |z (or z')-scores| below 2, while the satisfactory performances ranged from 71 to 85 % for Solution 2. This PT has been organised for the first time at EU level for the analysis of polyester oligomers and confirms that most of the NRLs are able to monitor properly these oligomers in the frame of Regulation (EU) No 10/2011., (© 2019 The Authors.)

Laboratories unexpectedly carried out pre-heating of polypropylene beverage cups prior to performing a migration test in a proficiency test. Principal component analysis of the data collected showed that the preheating temperature of the cups contributed to an increased variance of the data and distinguishing pre-heating and non-pre-heating groups. This triggered to study the effect of applying such pre-heating on the physical structure of the material and on the migration of additives to food simulant D1 (ethanol 50% v/v). Several cups were pre-heated at selected temperatures and either analyzed with differential scanning calorimetry to establish the degree of crystallinity or used for the migration test. Six target additives from Regulation (EU) No 10/2011 were quantified in the food simulant using HPLC-FLD and LC-MS. Results show that pre-heating of the beverage cups led to a significant change in the degree of crystallinity, resulting in a change of analyte migration in comparison to the migration results from non-pre-heated cups., (© 2019 The Authors.)

The use of polybutylene terephthalate (PBT) as a food contact material is increasing over the last years. Typical contaminations in the final PBT product include its cyclic oligomers, which are allowed as additives in food contact plastics according to Regulation (EU) No. 10/2011. Their investigation is currently limited by the lack of analytical standards and physical-chemical information. Therefore, four PBT cyclic oligomers have been isolated and purified from a PBT raw material with an automated preparative HPLC-DAD system. Comprehensive characterization of the compounds was performed using Ultra-High Performance Liquid Chromatography (UHPLC) with high resolution time-of-flight mass spectrometry, Fourier-Transform Infrared spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and Nuclear Magnetic Resonance (NMR) spectroscopy. The purity of each oligomer was assessed using a ¹H qNMR method and ranged from 96.1% to 97.0% for PBT tetramer and trimer respectively. The availability of pure and well characterized PBT cyclic oligomer standards will facilitate future studies of release from plastic food packaging materials.

An HPLC method with fluorescence detection has been developed and validated for the quantification of six fluorescent whitening agents (FWA) in plastic beverage cups after extraction and in food simulants after migration at 70°C for 2 h. The sensitivity of the method was high with LODs ranging from 0.053 to 0.251 μg kg -1 and LOQs from 0.107 to 0.504 μg kg -1 . Accuracy and precision were highly acceptable, with recoveries greater than 82% and RSDs (%) below 16%. The expanded combined uncertainty was found to be less than 23% for the measurements of all studied FWAs. In extracting the analytes from food contact materials (FCM), accelerated solvent extraction (ASE) and Soxhlet extraction were applied using ethanol as the extraction solvent. The results obtained for FWA in 10 different food plastic cups, made from different polymers, were compared. The ASE technique proved to be faster, more effective and efficient than Soxhlet extraction. Migration tests with official food simulants from Regulation (EU) No 10/2011 showed that the substances studied could potentially migrate using the selected migration conditions. The most pronounced effect was observed in case of simulant D1 (50% w/v ethanol in water). The analytical method proved to be a simple, fast, sensitive and reliable tool for the simultaneous quantification of six of the most used FWAs in both FCM extracts and food simulants after migration experiments.

Screening and quantification of phthalate metabolites in biological matrices provide information on the phthalate exposure. The preferred tool for the determination of phthalate metabolites is liquid chromatography-mass spectrometry, typically preceded by a sample extraction step. Method development for the determination of phthalate metabolites by hyphenated techniques faces challenges due to the widespread occurrence of phthalates in the laboratory and sample collection materials that impairs their accurate quantification. Here, the analytical methods that have been developed for the determination of biomarkers of phthalates in various matrices are presented, and limitations and challenges in these applications are discussed.

A UHPLC-HILIC-tandem MS method has been developed and validated for the quantification of 21 amino acids (20 protein amino acids and cystine) in their free form (FAA) and as protein constituents (total amino acids, TAA) in a rich protein food matrix such as lyophilized mussels (Mytilus galloprovincialis) samples. FAA were analyzed after suspending the samples in the presence of trichloroacetic acid in order to prevent dissolving the proteins, while TAA were determined after acid hydrolysis with 6M HCl in the presence of 4% v/v thioglycolic acid as a reducing agent. In hydrolysed samples 17 amino acids could be determined since tryptophan, cysteine, cystine and asparagine were degraded during acid hydrolysis. Linear regression coefficients (R 2 ) were above 0.99 for all amino acids. Accuracy and precision, expressed as recovery (%) and relative standard deviation (RSD, %) were in acceptable levels, ranging from 78.2 to 123.3% and below 15%, respectively for both FAA and TAA. Uncertainty was also below 12% for FAA and below 22% for TAA. Sensitivity of the method was high with LOD values ranging from 0.003 to 0.034g/100g for FAA and 0.001 to 0.004g/100g for TAA, while LOQ ranged from 0.009 to 0.104g/100g for FAA and 0.002 to 0.011g/100g for TAA. The method proved to be a fast and reliable tool for acquiring information on free and total amino acids profile in high protein content foodstuffs such as mussels., (Copyright © 2016 Elsevier B.V. All rights reserved.)

Rice cultivation relies on pesticide applications to ensure high yields. However, the regular use of pesticides seriously affects the quality of neighboring surface water systems. Thus complete knowledge of the environmental fate and dissipation of pesticides in the paddy rice environment should become available. So far only a few studies have provided comprehensive assessment of the dissipation of pesticides under the submerged cultivation conditions followed in rice. Thus, laboratory and 2-year field studies were performed to assess the dissipation of two new generation rice herbicides (penoxsulam and profoxydim) and one of the most important rice fungicides (tricyclazole). A good agreement between laboratory and field experiments was observed with a faster dissipation of penoxsulam and tricyclazole under field conditions. Profoxydim was the least persistent chemical (DT50 soil<1d; DT50 water 0.5-1.2d), followed by penoxsulam which persisted for longer particularly in the water compartment (DT50water=3.8-5.9d). Tricyclazole was the most persistent pesticide, especially in the soil compartment with DT50 values of 44.5-84.6 (field) and 197d (laboratory). These results could be utilized for the assessment of the environmental risk associated with the use of those pesticides in rice cultivation and the determination of potential mitigation measures for minimizing the risk for contamination of neighboring natural water resources., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

Background: Tocotrienols and tocopherols (tocols) are important phytochemical compounds with antioxidant activity and potential benefits for human health. Among cereals, barley is a good source of tocols. In the present study the effect of two cultivation methods, organic and conventional, on the tocol content in 12 Greek barley varieties was investigated. A validated reverse phase high-performance liquid chromatography method (RP-HPLC) with fluorescence detection (excitation at 292 nm, emission at 335 nm) was applied along with direct solvent extraction with acetonitrile at a 1:30 (w/v) sample/solvent ratio for tocol quantification., Results: The results showed statistically significant differences (P < 0.05) between the two cultivation methods (except for δ-tocopherol) as well as among varieties. In the case of organic cultivation the four homologues of tocotrienol (α-, β + γ- and δ-) increased, by 3.05-37.14% for α-tocotrienol, 15.51-41.09% for (β + γ)-tocotrienol and 30.45-196.61% for δ-tocotrienol, while those of tocopherol (α- and β + γ- but not δ-) decreased, by 5.90-36.34% for α-tocopherol and 2.84-46.49% for (β + γ)-tocopherol. A simple correlation analysis between tocols revealed a good correlation between (β + γ)-tocotrienol and δ-tocotrienol. Although there was a significant decrease in the important α-tocopherol in the varieties studied under organic cultivation, there was an overall increase in tocotrienol content., Conclusion: The cultivation method (organic or conventional) had an important effect on tocotrienol and tocopherol concentrations in barley. An overall increase in total tocol content and a clear increment in the tocotrienol/tocopherol ratio were observed., (Copyright © 2012 Society of Chemical Industry.)

Pesticides are widely used in rice cultivation, often resulting in detection of their residues in rice grains. So far, no analytical method has been available for the simultaneous determination of most rice pesticides in rice grains. This paper reports the development and validation of such a method for the determination of eight rice pesticides (penoxsulam tricyclazole, propanil, azoxystrobin, molinate, profoxydim, cyhalofop-butyl, deltamethrin) and 3,4-dichloroaniline, the main metabolite of propanil. Pesticide extraction and clean-up was performed by an optimized matrix solid-phase dispersion (MSPD) protocol on neutral alumina (5 g) using acetonitrile as the elution solvent. Samples were analyzed in a high-performance liquid chromatography-diode array detection (HPLC-DAD) system. Pesticide separation was achieved with a mobile phase of acetonitrile/water in a linear elution gradient from 30:70% (v/v) to 100:0% (v/v) in 14 min at a flow rate of 0.8 mL min(-1). Method validation was performed by means of linearity, intra-day accuracy, inter-day precision and sensitivity. Linear regression coefficients (R(2)) were always above 0.9948. Limits of detection (LOD) and quantification (LOQ) varied from 0.002 to 0.200 mg kg(-1) and 0.006 to 0.600 mg kg(-1), respectively. Recoveries were investigated at three fortification levels and were found to be acceptable (74-127%) with relative standard deviations (RSD) below 12%. Application of the method for the analysis of five commercial rice grain samples showed that the pesticide levels were below the LOD. Overall, the method developed is suitable for the determination of residues of most rice pesticides in rice grains at levels below the established MRLs.