Search

Perfect microwave absorbers, which absorb electromagnetic waves completely, play pivotal roles in electromagnetic shielding, and stealth technologies. Existing microwave absorber technologies rely on either electromagnetic properties of absorptive materials, the resonance behavior of meta-atoms, or a combination of both. So far, achieving simultaneous broadband absorption, high efficiency, and compact sizes remains a great challenge. Inspired by atomic doping techniques employed in conventional optical materials to broaden spectral bandwidths, a single-layer microfluidic metasurface microwave absorber is proposed with the assembly of two distinct types of water meta-atoms. By manipulating electromagnetic resonances of these water meta-atoms, the metasurface maintains impedance matching over a broad working range. A microwave absorber design with a thickness equivalent to 0.2 times the central wavelength is showcased, measuring over 93% absorption across both K and Ka bands (17.5-40.0 GHz). The results highlight unprecedented superiorities of microwave absorbers based on a 2D doped water meta-atom lattice when compared to previously reported metasurface absorbers utilizing identical meta-atoms. This absorber has advantages including small thickness, broad bandwidth, and cost-effectiveness, making it promising for applications in electromagnetic shielding, camouflage, and multi-spectral stealth., (© 2024 Wiley‐VCH GmbH.)

Metalens, characterized by their unique functions and distinctive physical properties, have gained significant attention for their potential applications. To further optimize the performance of metalens, it is necessary to characterize the phase modulation of the metalens. In this study, we present a multi-distance phase retrieval system based on optical field scanning and discuss its convergence and robustness. Our findings indicate that the system is capable of retrieving the phase distribution of the metalens as long as the measurement noise is low and the total length of the scanned light field is sufficiently long. This system enables the analysis of focal length and aberration by utilizing the computed phase distribution. We extend our investigation to measure the phase distribution of the metalens operating in the near-infrared (NIR) spectrum and identify the impact of defects in the sample on the phase. Additionally, we conduct a comparative analysis of the phase distribution of the metalens in air and ethanol and observe the variations in the phase modulation of the metalens in different working mediums. Our system provides a straightforward method for the phase characterization of metalens, aiding in optimizing the metalens design and functionality., (© 2024. The Author(s).)

Meta-lenses composed of artificial meta-atoms have stimulated substantial interest due to their compact and flexible wavefront shaping capabilities, outperforming bulk optical devices. The operating bandwidth is a critical factor determining the meta-lens' performance across various wavelengths. Meta-lenses that operate in a narrowband manner relying on nonlocal effects can effectively reduce disturbance and crosstalk from non-resonant wavelengths, making them well-suitable for specialized applications such as nonlinear generation and augmented reality/virtual reality display. However, nonlocal meta-lenses require striking a balance between local phase manipulation and nonlocal resonance excitation, which involves trade-offs among factors like quality-factor, efficiency, manipulation dimensions, and footprint. In this work, we experimentally demonstrate the nonlocal meta-lens featuring Huygens' bound states in the continuum (BICs) and its near-infrared imaging application. All-dielectric integrated-resonant unit is particularly optimized to efficiently induce both the quasi-BIC and generalized Kerker effect, while ensuring the rotation-angle robustness for generating geometric phase. The experimental results show that the single-layer nonlocal Huygens' meta-lens possesses a high quality-factor of 104 and achieves a transmission polarization conversion efficiency of 55%, exceeding the theoretical limit of 25%. The wavelength-selective two-dimensional focusing and imaging are demonstrated as well. This work will pave the way for efficient nonlocal wavefront shaping and meta-devices., (© 2024. The Author(s).)

The physics of bound states in the continuum (BICs) allows the design and demonstration of optical resonant structures with large values of the quality factor (Q factor) by employing dielectric structures with low losses. However, BIC is a general wave phenomenon that should be observed in many systems, including the metal-dielectric structures supporting surface plasmon polaritons where optical resonances are hindered by losses. Here we suggest and develop a comprehensive strategy to achieve high-Q resonances in plasmonic metasurfaces by effectively tailoring the resonant modes from local to nonlocal regimes, thus transitioning from quasi-isolated localized resonances to extended resonant modes involving strong interaction among neighboring structure metaunits.

The dual-focus vision observed in eagles' eyes is an intriguing phenomenon captivates scientists since a long time. Inspired by this natural occurrence, the authors' research introduces a novel bifocal meta-device incorporating a polarized camera capable of simultaneously capturing images for two different polarizations with slightly different focal distances. This innovative approach facilitates the concurrent acquisition of underfocused and overfocused images in a single snapshot, enabling the effective extraction of quantitative phase information from the object using the transport of intensity equation. Experimental demonstrations showcase the application of quantitative phase imaging to artificial objects and human embryonic kidney cells, particularly emphasizing the meta-device's relevance in dynamic scenarios such as laser-induced ablation in human embryonic kidney cells. Moreover, it provides a solution for the quantification during the dynamic process at the cellular level. Notably, the proposed eagle-eye inspired meta-device for phase imaging (EIMPI), due to its simplicity and compact nature, holds promise for significant applications in fields such as endoscopy and headsets, where a lightweight and compact setup is essential., (© 2024 Wiley‐VCH GmbH.)

Optical metasurfaces employing the Pancharatnam-Berry (PB) geometric phase, called PB metasurfaces, have been extensively applied to realize spin-dependent light manipulations. However, the properties of conventional PB metasurfaces are intrinsically limited by the Lorentz reciprocity. Breaking reciprocity can give rise to new properties and phenomena unavailable in conventional reciprocal systems. Here, we propose a mechanism to realize nonreciprocal PB metasurfaces of subwavelength thickness by using the Faraday magneto-optical (FMO) effect of yttrium iron garnet (YIG) material in synergy with the PB geometric phase of spatially rotating meta-atoms. Using full-wave numerical simulations and multipole analysis, we show that the metasurface composed of dielectric cylinders and a thin YIG layer can achieve high isolation of circularly polarized lights, attributed to the enhancement of the magneto-optical effect by the resonant Mie modes and Fabry-Pérot (FP) cavity mode. In addition, the metasurface can enable unidirectional wavefront manipulations of circularly polarized lights, including nonreciprocal beam steering and nonreciprocal beam focusing. The results contribute to the understanding of the interplay between nonreciprocity and geometric phase in light manipulations and can find applications in optical communications, optical sensing, and quantum information processing.

Endo-microscopy is crucial for real-time 3D visualization of internal tissues and subcellular structures. Conventional methods rely on axial movement of optical components for precise focus adjustment, limiting miniaturization and complicating procedures. Meta-device, composed of artificial nanostructures, is an emerging optical flat device that can freely manipulate the phase and amplitude of light. Here, an intelligent fluorescence endo-microscope is developed based on varifocal meta-lens and deep learning (DL). The breakthrough enables in vivo 3D imaging of mouse brains, where varifocal meta-lens focal length adjusts through relative rotation angle. The system offers key advantages such as invariant magnification, a large field-of-view, and optical sectioning at a maximum focal length tuning range of ≈2 mm with 3 µm lateral resolution. Using a DL network, image acquisition time and system complexity are significantly reduced, and in vivo high-resolution brain images of detailed vessels and surrounding perivascular space are clearly observed within 0.1 s (≈50 times faster). The approach will benefit various surgical procedures, such as gastrointestinal biopsies, neural imaging, brain surgery, etc., (© 2024 The Authors. Advanced Science published by Wiley‐VCH GmbH.)

Nonlocal effects originating from interactions between neighboring meta-atoms introduce additional degrees of freedom for peculiar characteristics of metadevices, such as enhancement, selectivity, and spatial modulation. However, they are generally difficult to manipulate because of the collective responses of multiple meta-atoms. Here, we experimentally demonstrate the nonlocal metasurface to realize the spatial modulation of dark-field emission. Plasmonic asymmetric split rings (ASRs) are designed to simultaneously excite local dipole resonance and nonlocal quasi-bound states in the continuum and spatially extended modes. With one type of unit, nonlocal effects are tailored by varying array periods. ASRs at the metasurface's edge lack sufficient interactions, resulting in stronger dark-field scattering and thus edge emission properties of the metasurface. Pixel-level spatial control is demonstrated by simply erasing some units, providing more flexibility than conventional local metasurfaces. This work paves the way for manipulating nonlocal effects and facilitates applications in optical trapping and sorting at the nanoscale.

Fluid flow behavior is visualized through particle image velocimetry (PIV) for understanding and studying experimental fluid dynamics. However, traditional PIV methods require multiple cameras and conventional lens systems for image acquisition to resolve multi-dimensional velocity fields. In turn, it introduces complexity to the entire system. Meta-lenses are advanced flat optical devices composed of artificial nanoantenna arrays. It can manipulate the wavefront of light with the advantages of ultrathin, compact, and no spherical aberration. Meta-lenses offer novel functionalities and promise to replace traditional optical imaging systems. Here, a binocular meta-lens PIV technique is proposed, where a pair of GaN meta-lenses are fabricated on one substrate and integrated with a imaging sensor to form a compact binocular PIV system. The meta-lens weigh only 116 mg, much lighter than commercial lenses. The 3D velocity field can be obtained by the binocular disparity and particle image displacement information of fluid flow. The measurement error of vortex-ring diameter is ≈1.25% experimentally validates via a Reynolds-number (Re) 2000 vortex-ring. This work demonstrates a new development trend for the PIV technique for rejuvenating traditional flow diagnostic tools toward a more compact, easy-to-deploy technique. It enables further miniaturization and low-power systems for portable, field-use, and space-constrained PIV applications., (© 2023 Wiley‐VCH GmbH.)

Metasurfaces have recently risen to prominence in optical research, providing unique functionalities that can be used for imaging, beam forming, holography, polarimetry, and many more, while keeping device dimensions small. Despite the fact that a vast range of basic metasurface designs has already been thoroughly studied in the literature, the number of metasurface-related papers is still growing at a rapid pace, as metasurface research is now spreading to adjacent fields, including computational imaging, augmented and virtual reality, automotive, display, biosensing, nonlinear, quantum and topological optics, optical computing, and more. At the same time, the ability of metasurfaces to perform optical functions in much more compact optical systems has triggered strong and constantly growing interest from various industries that greatly benefit from the availability of miniaturized, highly functional, and efficient optical components that can be integrated in optoelectronic systems at low cost. This creates a truly unique opportunity for the field of metasurfaces to make both a scientific and an industrial impact. The goal of this Roadmap is to mark this "golden age" of metasurface research and define future directions to encourage scientists and engineers to drive research and development in the field of metasurfaces toward both scientific excellence and broad industrial adoption., Competing Interests: The authors declare no competing financial interest., (© 2024 American Chemical Society.)

Optical meron is a type of nonplanar topological texture mainly observed in surface plasmon polaritons and highly symmetric points of photonic crystals in the reciprocal space. Here, we report Poynting-vector merons formed at the real space of a photonic crystal for a Γ-point illumination. Optical merons can be utilized for subwavelength-resolution manipulation of nanoparticles, resembling a topological Hall effect on electrons via magnetic merons. In particular, staggered merons and antimerons impose strong radiation pressure on large gold nanoparticles (AuNPs), while focused hot spots in antimerons generate dominant optical gradient forces on small AuNPs. Synergistically, differently sized AuNPs in a still environment can be trapped or orbit in opposite directions, mimicking a coupled galaxy system. They can also be separated with a 10 nm precision when applying a flow velocity of >1 mm/s. Our study unravels a novel way to exploit topological textures for optical manipulation with deep-subwavelength precision and switchable topology in a lossless environment.

Phase contrast imaging techniques enable the visualization of disparities in the refractive index among various materials. However, these techniques usually come with a cost: the need for bulky, inflexible, and complicated configurations. Here, we propose and experimentally demonstrate an ultracompact meta-microscope, a novel imaging platform designed to accomplish both optical and digital phase contrast imaging. The optical phase contrast imaging system is composed of a pair of metalenses and an intermediate spiral phase metasurface located at the Fourier plane. The performance of the system in generating edge-enhanced images is validated by imaging a variety of human cells, including lung cell lines BEAS-2B, CLY1, and H1299 and other types. Additionally, we integrate the ResNet deep learning model into the meta-microscope to transform bright-field images into edge-enhanced images with high contrast accuracy. This technology promises to aid in the development of innovative miniature optical systems for biomedical and clinical applications.

The optical illusion affects depth-sensing due to the limited and specific light-field information acquired by single-lens imaging. The incomplete depth information or visual deception would cause cognitive errors. To resolve this problem, an intelligent and compact depth-sensing meta-device that is miniaturized, integrated, and applicable for diverse scenes in all light levels is demonstrated. The compact and multifunction stereo vision system adopts an array with 3600 achromatic meta-lenses and a size of 1.2 × 1.2 mm 2 to measure the depth over a 30 cm range with deep-learning support. The meta-lens array can act as multiple imaging lenses to collect light field information. It can also work with a light source as an active optical device to project a structured light. The meta-lens array can serve as the core functional component of a light-field imaging system under bright conditions or a structured-light projection system in the dark. The depth information in both ways can be analyzed and extracted by the convolutional neural network. This work provides a new avenue for the applications such as autonomous driving, machine vision, human-computer interaction, augmented reality, biometric identification, etc., (© 2022 Wiley-VCH GmbH.)

Amorphous-Ge (α-Ge) or free-standing nanoparticles (NPs) synthesized via hydrogen-free plasma-enhanced chemical vapor deposition (PECVD) were applied as transmissive or reflective saturable absorbers, respectively, for starting up passively mode-locked erbium-doped fiber lasers (EDFLs). Under a threshold pumping power of 41 mW for mode-locking the EDFL, the transmissive α-Ge film could serve as a saturable absorber with a modulation depth of 52-58%, self-starting EDFL pulsation with a pulsewidth of approximately 700 fs. Under a high power of 155 mW, the pulsewidth of the EDFL mode-locked by the 15 s-grown α-Ge was suppressed to 290 fs, with a corresponding spectral linewidth of 8.95 nm due to the soliton compression induced by intra-cavity self-phase modulation. The Ge-NP-on-Au (Ge-NP/Au) films could also serve as a reflective-type saturable absorber to passively mode-lock the EDFL with a broadened pulsewidth of 3.7-3.9 ps under a high-gain operation with 250 mW pumping power. The reflection-type Ge-NP/Au film was an imperfect mode-locker, owing to their strong surface-scattered deflection in the near-infrared wavelength region. From the abovementioned results, both ultra-thin α-Ge film and free-standing Ge NP exhibit potential as transmissive and reflective saturable absorbers, respectively, for ultrafast fiber lasers.

A new framework of light coherence optimization is proposed to design non-ideal broadband achromatic lenses, enabling large-scale flat lenses' implementation and high performance. The strategy paves the way for practical planar optical devices and full-color imaging systems., (© 2023. The Author(s).)

The sixth-generation (6G) communication technology is being developed in full swing and is expected to be faster and better than the fifth generation. The precise information transfer directivity and the concentration of signal strength are the key topics of 6G technology. We report the synthetic phase design of rotary doublet Airy beam and triplet Gaussian beam varifocal meta-devices to fully control the terahertz beam's propagation direction and coverage area. The focusing spot can be delivered to arbitrary positions in a two-dimensional plane or a three-dimensional space. The highly concentrated signal can be delivered to a specific position, and the transmission direction can be adjusted freely to enable secure, flexible, and high-directivity 6G communication systems. This technology avoids the high costs associated with extensive use of active components. 6G communication systems, wireless power transfer, zoom imaging, and remote sensing will benefit from large-scale adoption of such a technology.

Transverse spin momentum related to the spin angular momentum (SAM) of light has been theoretically studied recently and predicted to generate an intriguing optical lateral force (OLF). Despite extensive studies, there is no direct experimental evidence of a stable OLF resulting from the dominant SAM rather than the ubiquitous spin-orbit interaction in a single light beam. Here, we theoretically unveil the nontrivial physics of SAM-correlated OLF, showing that the SAM is a dominant factor for the OLF on a nonabsorbing particle, while an additional force from the canonical (orbital) momentum is exhibited on an absorbing particle due to the spin-orbit interaction. Experimental results demonstrate the bidirectional movement of 5-μm-diameter particles on both sides of the beam with opposite spin momenta. The amplitude and sign of this force strongly depend on the polarization. Our optofluidic platform advances the exploitation of exotic forces in systems with a dominant SAM, facilitating the exploration of fascinating light-matter interactions.

Recent years have witnessed promising artificial intelligence (AI) applications in many disciplines, including optics, engineering, medicine, economics, and education. In particular, the synergy of AI and meta-optics has greatly benefited both fields. Meta-optics are advanced flat optics with novel functions and light-manipulation abilities. The optical properties can be engineered with a unique design to meet various optical demands. This review offers comprehensive coverage of meta-optics and artificial intelligence in synergy. After providing an overview of AI and meta-optics, we categorize and discuss the recent developments integrated by these two topics, namely AI for meta-optics and meta-optics for AI. The former describes how to apply AI to the research of meta-optics for design, simulation, optical information analysis, and application. The latter reports the development of the optical Al system and computation via meta-optics. This review will also provide an in-depth discussion of the challenges of this interdisciplinary field and indicate future directions. We expect that this review will inspire researchers in these fields and benefit the next generation of intelligent optical device design.

Metasurfaces are 2D artificial materials consisting of arrays of metamolecules, which are exquisitely designed to manipulate light in terms of amplitude, phase, and polarization state with spatial resolutions at the subwavelength scale. Traditional micro/nano-optical sensors (MNOSs) pursue high sensitivity through strongly localized optical fields based on diffractive and refractive optics, microcavities, and interferometers. Although detections of ultra-low concentrations of analytes have already been demonstrated, the label-free sensing and recognition of complex and unknown samples remain challenging, requiring multiple readouts from sensors, e.g ., refractive index, absorption/emission spectrum, chirality, etc . Additionally, the reliability of detecting large, inhomogeneous biosamples may be compromised by the limited near-field sensing area from the localization of light. Here, we review recent advances in metasurface-based MNOSs and compare them with counterparts using micro-optics from aspects of physics, working principles, and applications. By virtue of underlying the physics and design flexibilities of metasurfaces, MNOSs have now been endowed with superb performances and advanced functionalities, leading toward highly integrated smart sensing platforms.

Elliptically polarized light waves carry the spin angular momentum (SAM), so they can exert optical torques on nanoparticles. Usually, the rotation follows the same direction as the SAM due to momentum conservation. It is counterintuitive to observe the reversal of optical torque acting on an ordinary dielectric nanoparticle illuminated by an elliptically or circularly polarized light wave. Here, we demonstrate that negative optical torques, which are opposite to the direction of SAM, can ubiquitously emerge when elliptically polarized light waves are impinged on dielectric nanoparticles obliquely. Intriguingly, the rotation can be switched between clockwise and counterclockwise directions by controlling the incident angle of light. Our study suggests a new playground to harness polarization-dependent optical force and torque for advancing optical manipulations.

Ideal imaging, which is constantly pursued, requires the collection of all kinds of optical information of the objects in view, such as three-dimensional spatial information (3D) including the planar distribution and depth, and the colors, i.e., spectral information (1D). Although three-dimensional spatial imaging and spectral imaging have individually evolved rapidly, their straightforward combination is a cumbersome system, severely hindering the practical applications of four-dimensional (4D) imaging. Here, we demonstrate the ultra-compact spectral light-field imaging (SLIM) by using a transversely dispersive metalens array and a monochrome imaging sensor. With only one snapshot, the SLIM presents advanced imaging with a 4 nm spectral resolution and near-diffraction-limit spatial resolution. Consequently, visually indistinguishable objects and materials can be discriminated through SLIM, which promotes significant progress towards ideal plenoptic imaging., (© 2022. The Author(s).)

Vacuum ultraviolet (VUV) light plays an essential role across science and technology, from molecular spectroscopy to nanolithography and biomedical procedures. Realizing nanoscale devices for VUV light generation and control is critical for next-generation VUV sources and systems, but the scarcity of low-loss VUV materials creates a substantial challenge. We demonstrate a metalens that both generates-by second-harmonic generation-and simultaneously focuses the generated VUV light. The metalens consists of 150-nm-thick zinc oxide (ZnO) nanoresonators that convert 394 nm (~3.15 eV) light into focused 197-nm (~6.29 eV) radiation, producing a spot 1.7 μm in diameter with a 21-fold power density enhancement as compared to the wavefront at the metalens surface. The reported metalens is ultracompact and phase-matching free, allowing substantial streamlining of VUV system design and facilitating more advanced applications. This work provides a useful platform for developing low-loss VUV components and increasing the accessibility of the VUV regime.

Manipulation and precise delivery of optical energies in the regions of interest within specimens require different strategies. Hence, proper control of input beam parameters is a prerequisite. One of the prominent methods is metasurface optics, capable of crafting properties of light at nanoscales. Here, the generation of an abrupt autofocusing (AAF) beam by a nanophotonic metasurface for biomedical applications is demonstrated. Fluorescence guided laser microprofiling of mouse cardiac samples is experimentally investigated, using the AAF beam to deliver optical energy selectively to specific locations. In addition, photocoagulation of ex vivo swine skin tissue is performed and observed through optical coherence tomography. The results show great potentials for integrating metasurface optics to realize miniature laser surgery instruments for wide applications in biomedicine., (© 2022 The Authors. Small Methods published by Wiley-VCH GmbH.)

Circularly polarized light carries spin angular momentum, so it can exert an optical torque on the polarization-anisotropic particle by the spin momentum transfer. Here, we show that giant positive and negative optical torques on Mie-resonant (gain) particles arise from the emergence of superhybrid modes with magnetic multipoles and electric toroidal moments, excited by linearly polarized beams. Anomalous positive and negative torques on particles (doped with judicious amount of dye molecules) are over 800 and 200 times larger than the ordinary lossy counterparts, respectively. Meanwhile, a rotational motor can be configured by switching the s- and p-polarized beams, exhibiting opposite optical torques. These giant and reversed optical torques are unveiled for the first time in the scattering spectrum, paving another avenue toward exploring unprecedented physics of hybrid and superhybrid multipoles in metaoptics and optical manipulations.

The optical tweezer is one of the important techniques for contactless manipulation in biological research to control the motion of tiny objects. For three-dimensional (3D) optical manipulation, shaped light beams have been widely used. Typically, spatial light modulators are used for shaping light fields. However, they suffer from bulky size, narrow operational bandwidth, and limitations of incident polarization states. Here, a cubic-phase dielectric metasurface, composed of GaN circular nanopillars, is designed and fabricated to generate a polarization-independent vertically accelerated two-dimensional (2D) Airy beam in the visible region. The distinctive propagation characteristics of a vertically accelerated 2D Airy beam, including non-diffraction, self-acceleration, and self-healing, are experimentally demonstrated. An optical manipulation system equipped with a cubic-phase metasurface is designed to perform 3D manipulation of microscale particles. Due to the high-intensity gradients and the reciprocal propagation trajectory of Airy beams, particles can be laterally shifted and guided along the axial direction. In addition, the performance of optical trapping is quantitatively evaluated by experimentally measured trapping stiffness. Our metasurface has great potential to shape light for compact systems in the field of physics and biological applications.

Fluorescence microscopy with optical sectioning capabilities is extensively utilized in biological research to obtain three-dimensional structural images of volumetric samples. Tunable lenses have been applied in microscopy for axial scanning to acquire multiplane images. However, images acquired by conventional tunable lenses suffer from spherical aberration and distortions. Here, we design, fabricate, and implement a dielectric Moiré metalens for fluorescence imaging. The Moiré metalens consists of two complementary phase metasurfaces, with variable focal length, ranging from ∼10 to ∼125 mm at 532 nm by tuning mutual angles. In addition, a telecentric configuration using the Moiré metalens is designed for high-contrast multiplane fluorescence imaging. The performance of our system is evaluated by optically sectioned images obtained from HiLo illumination of fluorescently labeled beads, as well as ex vivo mice intestine tissue samples. The compact design of the varifocal metalens may find important applications in fluorescence microscopy and endoscopy for clinical purposes.

The current outbreak of the coronavirus disease-19 (COVID-19) pandemic worldwide has caused millions of fatalities and imposed a severe impact on our daily lives. Thus, the global healthcare system urgently calls for rapid, affordable, and reliable detection toolkits. Although the gold-standard nucleic acid amplification tests have been widely accepted and utilized, they are time-consuming and labor-intensive, which exceedingly hinder the mass detection in low-income populations, especially in developing countries. Recently, due to the blooming development of photonics, various optical chips have been developed to detect single viruses with the advantages of fast, label-free, affordable, and point of care deployment. Herein, optical approaches especially in three perspectives, e.g., flow-free optical methods, optofluidics, and surface-modification-assisted approaches, are summarized. The future development of on-chip optical-detection methods in the wave of emerging new ideas in nanophotonics is also briefly discussed., Competing Interests: The authors declare no conflict of interest., (© 2021 The Authors. Advanced Photonics Research published by Wiley‐VCH GmbH.)

Metalenses have emerged as a new optical element or system in recent years, showing superior performance and abundant applications. However, the phase distribution of a metalens has not been measured directly up to now, hindering further quantitative evaluation of its performance. We have developed an interferometric imaging phase measurement system to measure the phase distribution of a metalens by taking only one photo of the interference pattern. Based on the measured phase distribution, we analyse the negative chromatic aberration effect of monochromatic metalenses and propose a feature size of metalenses. Different sensitivities of the phase response to wavelength between the Pancharatnam-Berry phase-based metalens and propagation phase-reliant metalens are directly observed in the experiment. Furthermore, through phase distribution analysis, it is found that the distance between the measured metalens and the brightest spot of focusing will deviate from the focal length when the metalens has a low nominal numerical aperture, even though the metalens is ideal without any fabrication error. We also use the measured phase distribution to quantitatively characterise the imaging performance of the metalens. Our phase measurement system will help not only designers optimise the designs of metalenses but also fabricants distinguish defects to improve the fabrication process, which will pave the way for metalenses in industrial applications.

Meta-holographic encryption is a potentially important technique for information security. Despite rapid progresses in multi-tasked meta-holograms, the number of information channels available in metasurfaces is limited, making meta-holographic encryption vulnerable to some attacking algorithms. Herein, we demonstrate a re-programmable metasurface that can produce arbitrary holographic images for optical encryption. The encrypted information is divided into two matrices. These two matrices are imposed to the incident light and the metasurface, respectively. While the all-dielectric metasurface is static, the phase matrix of incident light provides additional degrees of freedom to precisely control the eventual functions at will. With a single Si metasurface, arbitrary holographic images and videos have been transported and decrypted. We hope that this work paves a more promising way to optical information encryption and authentication.

Planar achromatic metalenses with a thickness of the order of wavelength have attracted much attention for their potential applications in ultra-compact optical devices. However, realizing single-layer achromatic metalenses across a wide bandwidth requires that the corresponding meta-atoms have complex cross-sections for correct phase profile and dispersion compensation. Herein, we introduce an effective Abbe number and use lens maker equations to design a dual-layer achromatic metalens in which we compensate the dispersion by using a plano-convex liked metalens combined with a plano-concave liked metalens. The stacked metalens are designed based on simple high refractive index dielectric cylindrical meta-atoms with different radii, which simplify the design and fabrication processes. We demonstrate that a dual-layer achromatic metalens has a small focal length difference across the visible wavelength range and an average focusing efficiency above 50%, which proves that the design method is promising for many potential applications in multi-functional flat optical devices.

Strong mode coupling and Fano resonances arisen from exceptional interaction between resonant modes in single nanostructures have raised much attention for their advantages in nonlinear optics, sensing, etc. Individual electromagnetic multipole modes such as quadrupoles, octupoles, and their counterparts from mode coupling (toroidal dipole and nonradiating anapole mode) have been well investigated in isolated or coupled nanostructures with access to high Q factors in bound states in the continuum. Albeit the extensive study on ordinary dielectric particles, intriguing aspects of light-matter interactions in single chiral nanostructures is lacking. Here, we unveil that extraordinary multipoles can be simultaneously superpositioned in a chiral nanocylinder, such as two toroidal dipoles with opposite moments, and electric and magnetic sextupoles. The induced optical lateral forces and their scattering cross sections can thus be either significantly enhanced in the presence of those multipoles with high-Q factors, or suppressed by the bound states in the continuum. This work for the first time reveals the complex correlation between multipolar effects, chiral coupling, and optical lateral force, providing a distinct way for advanced optical manipulation.

The development of two-dimensional metasurfaces has shown great potential in quantum-optical technologies because of the excellent flexibility in light-field manipulation. By integrating a metalens array with a nonlinear crystal, we demonstrate a 100-path spontaneous parametric down-conversion photon-pair source in a 10 × 10 array, which shows promise for high-dimensional entanglement and multiphoton-state generation. We demonstrate two-, three- and four-dimensional two-photon path entanglement with different phases encoded by metalenses with fidelities of 98.4, 96.6, and 95.0%, respectively. Furthermore, four-photon and six-photon generation is observed with high indistinguishability of photons generated from different metalenses. Our metalens-array-based quantum photon source is compact, stable, and controllable, indicating a new platform for integrated quantum devices., (Copyright © 2020 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.)

The achievement of structural color has shown advantages in large-gamut, high-saturation, high-brightness, and high-resolution. While a large number of plasmonic/dielectric nanostructures have been developed for structural color, the previous approaches fail to match all the above criterion simultaneously. Herein we utilize the Si metasurface to demonstrate an all-in-one solution for structural color. Due to the intrinsic material loss, the conventional Si metasurfaces only have a broadband reflection and a small gamut of 78% of sRGB. Once they are combined with a refractive index matching layer, the reflection bandwidth and the background reflection are both reduced, improving the brightness and the color purity significantly. Consequently, the experimentally demonstrated gamut has been increased to around 181.8% of sRGB, 135.6% of Adobe RGB, and 97.2% of Rec.2020. Meanwhile, high refractive index of silicon preserves the distinct color in a pixel with 2 × 2 array of nanodisks, giving a diffraction-limit resolution.

Lateral optical forces induced by linearly polarized laser beams have been predicted to deflect dipolar particles with opposite chiralities toward opposite transversal directions. These "chirality-dependent" forces can offer new possibilities for passive all-optical enantioselective sorting of chiral particles, which is essential to the nanoscience and drug industries. However, previous chiral sorting experiments focused on large particles with diameters in the geometrical-optics regime. Here, we demonstrate, for the first time, the robust sorting of Mie (size ~ wavelength) chiral particles with different handedness at an air-water interface using optical lateral forces induced by a single linearly polarized laser beam. The nontrivial physical interactions underlying these chirality-dependent forces distinctly differ from those predicted for dipolar or geometrical-optics particles. The lateral forces emerge from a complex interplay between the light polarization, lateral momentum enhancement, and out-of-plane light refraction at the particle-water interface. The sign of the lateral force could be reversed by changing the particle size, incident angle, and polarization of the obliquely incident light., Competing Interests: Conflict of interestThe authors declare that they have no conflict of interest., (© The Author(s) 2020.)

Strain-sensitive Ba x Sr 1- x TiO 3 perovskite systems are widely used because of their superior nonlinear dielectric behaviors. In this research, new heterostructures including paraelectric Ba 0.5 Sr 0.5 TiO 3 (BSTO) and ferroelectric BaTiO 3 (BTO) materials were epitaxially fabricated on flexible muscovite substrate. Through simple bending, the application of mechanical force can regulate the dielectric constant of BSTO from -77 to 36% and the channel current of BTO-based ferroelectric field effect transistor by two orders. The detailed mechanism was studied through the exploration of phase transition and determination of band structure. In addition, the phase-field simulations were implemented to provide theoretical support. This research opens a new avenue for mechanically controllable components based on high-quality oxide heteroepitaxy., (Copyright © 2020 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).)

Dielectric metasurfaces have recently been shown to provide an excellent platform for the harmonic generation of light due to their low optical absorption and to the strong electromagnetic field enhancement that can be designed into their constituent meta-atoms. Here, we demonstrate vacuum ultraviolet (VUV) third harmonic generation from a specially designed dielectric metasurface consisting of a titanium dioxide (TiO 2 ) nanostructure array. The metasurface was designed to enhance the generation of VUV light at a wavelength of 185 nm by tailoring its geometric design parameters to achieve an optical resonance at the fundamental laser wavelength of 555 nm. The metasurface exhibits an enhancement factor of nominally 180 compared to an unpatterned TiO 2 thin film of the same thickness, evidence of strong field enhancement at the fundamental wavelength. Mode analysis reveals that the origin of the enhancement is an anapole resonance near the pump wavelength. This work demonstrates an effective strategy for the compact generation of VUV light that could enable expanded access to this useful region of the electromagnetic spectrum.

We present experimental and theoretical studies of a metamaterial-based plasmonic structure to build a plasmonic-molecular coupling detection system. High molecular sensitivity is realized only when molecules are located in the vicinity of the enhanced field (hot spot region); thus, introducing target molecules in the hot spot region to maximize plasmonic-molecular coupling is crucial to developing the sensing technology. We design a metamaterial consisting of a vertically oriented metal insulator metal (MIM) structure with a 25 nm channel sandwiched between two metal films, which enables the delivery of molecules into the large ravinelike hot spot region, offering an ultrasensitive platform for molecular sensing. This metamaterial is applied to carbon dioxide and butane detection. We design the structure to exhibit resonances at 4033 and 2945 cm -1 , which overlap with the C═O and -CH 2 vibration modes, respectively. The mutual coupling of these two resonance modes creates a Fano resonance, and their distinct peaks are clearly observed in the corresponding transmission dips. In addition, owing to its small footprint, such a vertical-oriented MIM structure enables us to increase the integration density and allows the detection of a 20 ppm concentration with negligible background noise and high selectivity in the mid-infrared region.

Tomography is an informative imaging modality that is usually implemented by mechanical scanning, owing to the limited depth-of-field (DOF) in conventional systems. However, recent imaging systems are working towards more compact and stable architectures; therefore, developing nonmotion tomography is highly desirable. Here, we propose a metalens-based spectral imaging system with an aplanatic GaN metalens (NA = 0.78), in which large chromatic dispersion is used to access spectral focus tuning and optical zooming in the visible spectrum. After the function of wavelength-switched tomography was confirmed on cascaded samples, this aplanatic metalens is utilized to image microscopic frog egg cells and shows excellent tomographic images with distinct DOF features of the cell membrane and nucleus. Our approach makes good use of the large diffractive dispersion of the metalens and develops a new imaging technique that advances recent informative optical devices., Competing Interests: Conflict of interestThe authors declare that they have no conflict of interest., (© The Author(s) 2019.)

With the rise of Internet of Things, the presence of flexible devices has attracted significant attention owing to design flexibility. A ferroelectric field-effect transistor (FeFET), showing the advantages of high speed, nondestructive readout, and low-power consumption, plays a key role in next-generation technology. However, the performance of these devices is restricted since conventional flexible substrates show poor thermal stability to integrate traditional ferroelectric materials, limiting the compatibility of wearable devices. In this study, we adopt flexible muscovite mica as a substrate due to its good thermal properties and epitaxial integration ability. A flexible FeFET composed of oxide heteroepitaxy on muscovite is realized by combining an aluminum-doped zinc oxide film as the semiconductor channel layer and a Pb(Zr 0.7 Ti 0.3 )O 3 film as the ferroelectric gate dielectric. The excellent characteristics of the transistor together with superior thermal stability and mechanical flexibility are demonstrated through various mechanical bending and temperature measurements. The on/off current ratio of the FeFET is higher than 10 3 , which based on the field effect in the transfer curve. The smallest bending radius that can be achieved is 5 mm with a cyclability of 300 times and a retention of 100 h. This study opens an avenue to use oxide heteroepitaxy to construct a FeFET for next-generation flexible electronic systems.

The original version of this Article omitted the author Kuan Wang, who is from the 'College of Biomedical Engineering, Taipei Medical University, Taipei 11031, Taiwan' and 'Nanyang Environment & Water Research Institute, Nanyang Technological University, Singapore 637141, Singapore.'Also, the author S.H. Lim was incorrectly given as L.S. Hoi and A. Larsson was incorrectly given as A. Larson.The "Author contributions" was amended to reflect the authorship changes. It previously read 'Y.Z.S., C.-W.Q., and A.Q.L. jointly conceived the idea. Y.Z.S., S.X., Y.Z., J.B.Z., W.S., J.H.W., T.N.C., Z.C.Y., Y.L.H., B.L., P.H.Y., D.P.T., and C.-W.Q. performed the numerical simulations and theoretical analysis. Y.Z.S., S.X., and L.K.C. did the fabrication and experiments of particle hopping, biomolecule binding and flow cytometry. A.L. and L.S.H. did the SPR experiments. S.X., Y.Z.S., Y.Z., C.-W.Q., Y.-Y.C., L.K.C., T.H.Z., and A.Q.L. prepared the manuscript. S.X., Y.Z., C.-W.Q., and A.Q.L. supervised and coordinated all the work. All authors commented on the manuscript.' The correct version states 'B.L., K. W., P.H.Y.' instead of 'B.L., P.H.Y.' and 'S.H.L.' in place of 'L.S.H.'This has been corrected in both the PDF and HTML versions of the Article.

A light-field camera captures both the intensity and the direction of incoming light 1-5 . This enables a user to refocus pictures and afterwards reconstruct information on the depth of field. Research on light-field imaging can be divided into two components: acquisition and rendering. Microlens arrays have been used for acquisition, but obtaining broadband achromatic images with no spherical aberration remains challenging. Here, we describe a metalens array made of gallium nitride (GaN) nanoantennas 6 that can be used to capture light-field information and demonstrate a full-colour light-field camera devoid of chromatic aberration. The metalens array contains an array of 60 × 60 metalenses with diameters of 21.65 μm. The camera has a diffraction-limited resolution of 1.95 μm under white light illumination. The depth of every object in the scene can be reconstructed slice by slice from a series of rendered images with different depths of focus. Full-colour, achromatic light-field cameras could find applications in a variety of fields such as robotic vision, self-driving vehicles and virtual and augmented reality.

The second harmonic generation (SHG) of vertical and planar split-ring resonators (SRRs) that are broken centro-symmetry configurations at the interface of metal surface and air is investigated. Strong interactions, better electromagnetic field confinements, and less leakage into the substrate for vertical SRRs are found. Experimental results show a 2.6-fold enhancement of SHG nonlinearity, which is in good agreement with simulations and calculations. Demonstrations of 3D metastructures and vertical SRRs with strong SHG nonlinearity majorly result from magnetic dipole and electric quadrupole clearly provides potential applications for photonics and sensing., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Vacuum ultraviolet (VUV) light has important applications in many fields, ranging from device fabrication to photochemistry, from environmental remediation to microscopy and spectroscopy. Methods to produce coherent VUV light frequently utilize high harmonic generation in media such as rare gases or atomic vapors; nonlinear optical crystals that support second harmonic generation into the VUV are quite rare. Here, we demonstrate an all-dielectric metasurface designed for the nonlinear optical generation of VUV light. Consisting of an array of zinc oxide nanoresonators, the device exhibits a magnetic dipole resonance at a wavelength of 394 nm. When excited with ultrafast laser pulses at this wavelength, the second harmonic at 197 nm is readily generated. Manipulation of the metasurface design enables control over the radiation pattern. This work has the potential to open the door toward simple and compact VUV sources for new applications.