Search

Chronic wounds often result in multiple infections with various kinds of bacteria and uncontrolled wound exudate, resulting in several healthcare issues. Advanced medicated nanofibres prepared by electrospinning have gained much attention for their topical application on infected chronic wounds. The objective of this work is to enhance the critical variables of ciprofloxacin-loaded polycaprolactone-silk sericin (PCL/SS-PVA-CIP) nanofibre production via the process of electrospinning. To examine the antibacterial effectiveness of PCL/SS-PVA-CIP nanocomposites, the material was tested against P. aeruginosa and S. aureus. The combination of PCL/SS-PVA-CIP exhibited potent inhibitory properties, with the most effective concentrations of ciprofloxacin (CIP) being 3 μg/g and 7.0 μg/g for each bacterium, respectively. The biocompatibility was evaluated by conducting cell reduction and proliferation studies using the human epidermal keratinocyte (HaCaT) cells and human gingival fibroblasts (HGFs) in vitro cell lines. The PCL/SS-PVA-CIP showed good cell compatibility with HaCaT and HGF cells, with effective proliferation even at antibiotic doses of up to 7.0 μg/g. The drug release effectiveness of the nanocomposites was assessed at various concentrations of CIP, resulting in a maximum cumulative release of 76.5% and 74.4% after 72 h for CIP concentrations of 3 μg/g and 7 μg/g, respectively. In summary, our study emphasizes the possibility of combining silk sericin (SS) and polycaprolactone (PCL) loading with CIP nanocomposite for wound management. [ABSTRACT FROM AUTHOR]

Textiles are promising candidates for use in soft robots and wearable devices due to their inherent compliance, high versatility, and skin comfort. Planar fluidic textile‐based actuators exhibit low profile and high conformability, and can seamlessly integrate additional components (e.g., soft sensors or variable stiffness structures [VSSs]) to create advanced, multifunctional smart textile actuators. In this article, a new class of programmable, fluidic soft textile muscles (STMs) that incorporate multilayered silicone sheets with embedded fluidic channels is introduced. The STMs are scalable and fabricated by apparel engineering techniques, offering a fabrication approach able to create large‐scaled multilayered structures that can be challenging for current microfluidic bonding methods. They are also highly automation compatible due to no manual insertion of elastic tubes/bladders into textile structures. Liquid metal is employed for creating fluidic channels. It is not only used for actuation but also used as channels for additional features such as soft piezoresistive sensors with enhanced sensitivity to STMs' pressure‐induced elongation, or VSSs of either low‐melting‐point alloys or a new thermo‐responsive epoxy with low viscosity and transition temperature. The STMs hold promising prospects for soft robotic and wearable applications, which is demonstrated by an example of a textile‐based wearable 3D skin‐stretch haptic interface. [ABSTRACT FROM AUTHOR]

Summary: As global populations rise, the need for sustainable food security and waste reduction solutions becomes crucial. Antimicrobial food packaging presents a strategic defence against spoilage and pathogens and has the potential to minimise foodborne illnesses and global food losses. Essential oils (EOs), known for their inherent antioxidant and antimicrobial properties, are utilised as natural additives in active food packaging materials. These oils, rich in terpenes and hydrocarbons, are promising for food longevity but face challenges like reduced effectiveness in packaging films, highlighting the necessity for nanoengineered solutions to improve their stability and function in polymer matrices. This article aims to review recent work on the use of EOs incorporated in active food packaging. The focus is on the use of nanotechnology to enhance the antimicrobial efficacy of plant‐derived essential oils as preservatives. This article illustrates the nanoscale interactions among essential oils, polymers and food substances, aiming to elucidate how technologies such as nanoencapsulation, nanoemulsions and nanocomposites enhance antibacterial and antioxidant performance while improving packaging structural integrity. [ABSTRACT FROM AUTHOR]

Bacterial infections account for countless deaths globally. Antibiotics are the primary countermeasure; however, the alarming spread of antibiotic‐resistant strains necessitates alternative solutions. Silver and silver compounds have emerged as promising antibacterial agents. However, issues related to cytotoxicity and genotoxicity of silver remain concern. To overcome these challenges, this proposes an easy‐to‐control and straightforward method to synthesize novel Silver─gallium (Ag─Ga) nano‐amalgamated particles. Gallium liquid metal (GaLM) is used to facilitate the galvanic deposition of silver nanocrystals (Ag) on oxide layer. The GaLM not only serves as a carrier for silver through the galvanic replacement process, but also provides a controlled‐release mechanism for silver, in this way improving biocompatibility, reducing inflammation, and stimulating bone growth. Notably, Ag─Ga suspensions can be conveniently deposited by spray‐coating on a range of devices and material surfaces, effectively eliminating pathogenic bacteria with efficacy comparable to that of silver ions. In vivo studies in rat models affirm the antibacterial capabilities, especially against methicillin‐resistant Staphylococcus aureus and Escherichia coli, when placed on implants such as titanium rods and magnesium discs. Furthermore, Ag─Ga promotes bone matrix formation and collagen growth without eliciting an inflammatory response, indicating a major promise for coatings on a wide variety of biomedical devices and materials. [ABSTRACT FROM AUTHOR]

With the rising demand for medical implants and the dominance of implant-associated failures including infections, extensive research has been prompted into the development of novel biomaterials that can offer desirable characteristics. This study develops and evaluates new titanium-based alloys containing gallium additions with the aim of offering beneficial antibacterial properties while having a reduced stiffness level to minimise the effect of stress shielding when in contact with bone. The focus is on the microstructure, mechanical properties, antimicrobial activity, and cytocompatibility to inform the suitability of the designed alloys as biometals. Novel Ti-33Nb-xGa alloys (x = 3, 5 wt%) were produced via casting followed by homogenisation treatment, where all results were compared to the currently employed alloy Ti-6Al-4V. Optical microscopy, scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) results depicted a single beta (β) phase microstructure in both Ga-containing alloys, where Ti-33Nb-5Ga was also dominated by dendritic alpha (α) phase grains in a β-phase matrix. EDS analysis indicated that the α-phase dendrites in Ti-33Nb-5Ga were enriched with titanium, while the β-phase was richer in niobium and gallium elements. Mechanical properties were measured using nanoindentation and microhardness methods, where the Young's modulus for Ti-33Nb-3Ga and Ti-33Nb-5Ga was found to be 75.4 ± 2.4 and 67.2 ± 1.6 GPa, respectively, a significant reduction of 37% and 44% with respect to Ti-6Al-4V. This reduction helps address the disproportionate Young's modulus between titanium implant components and cortical bone. Importantly, both alloys successfully achieved superior antimicrobial properties against Gram-negative P. aeruginosa and Gram-positive S. aureus bacteria. Antibacterial efficacy was noted at up to 90 ± 5% for the 3 wt% alloy and 95 ± 3% for the 5 wt% alloy. These findings signify a substantial enhancement of the antimicrobial performance when compared to Ti-6Al-4V which exhibited very small rates (up to 6.3 ± 1.5%). No cytotoxicity was observed in hGF cell lines over 24 h. Cell morphology and cytoskeleton distribution appeared to depict typical morphology with a prominent nucleus, elongated fibroblastic spindle-shaped morphology, and F-actin filamentous stress fibres in a well-defined structure of parallel bundles along the cellular axis. The developed alloys in this work have shown very promising results and are suggested to be further examined towards the use of orthopaedic implant components. [ABSTRACT FROM AUTHOR]

In the quest to curtail the spread of healthcare-associated infections, this work showcases the fabrication of a cutting-edge antibacterial textile coating armoured with aggregation-induced emission photosensitisers (AIE PS) to prevent bacterial colonisation on textiles. The adopted methodology includes a multi-step process using plasma polymerisation and subsequent integration of AIE PS on their surface. The antibacterial effectiveness of the coating was tested against Pseudomonas aeruginosa and Staphylococcus aureus after light irradiation for 1 h. Furthermore, antibacterial mechanistic studies revealed their ability to generate reactive oxygen species that can damage bacterial cell membrane integrity. The results of this investigation can be used to develop ground-breaking explanations for infection deterrence, principally in situations where hospital fabrics play a critical part in the transmission of diseases. The antibacterial coating for textiles developed in this study holds great promise as an efficient strategy to promote public health and reduce the danger of bacterial diseases through regular contact with fabrics. [ABSTRACT FROM AUTHOR]

With the rising demand for implantable orthopaedic medical devices and the dominance of device-associated infections, extensive research into the development of novel materials has been prompted. Among these, new-generation titanium alloys with biocompatible elements and improved stiffness levels have received much attention. Furthermore, the development of titanium-based materials that can impart antibacterial function has demonstrated promising results, where gallium has exhibited superior antimicrobial action. This has been evidenced by the addition of gallium to various biomaterials including titanium alloys. Therefore, this paper aims to review the antibacterial activity of gallium when incorporated into biomedical materials, with a focus on titanium-based alloys. First, discussion into the development of new-generation Ti alloys that possess biocompatible elements and reduced Young's moduli is presented. This includes a brief review of the influence of alloying elements, processing techniques and the resulting biocompatibilities of the materials found in the literature. The antibacterial effect of gallium added to various materials, including bioglasses, liquid metals, and bioceramics, is then reviewed and discussed. Finally, a key focus is given to the incorporation of gallium into titanium systems for which the inherent mechanical, biocompatible, and antibacterial effects are reviewed and discussed in more detail, leading to suggestions and directions for further research in this area. [ABSTRACT FROM AUTHOR]