Search

[EN] Sandwichlike (SW) cultures are engineered as a multilayer technology to simultaneously stimulate dorsal and ventral cell receptors, seeking to mimic cell adhesion in three-dimensional (3D) environments in a reductionist manner. The effect of this environment on cell differentiation was investigated for several cell types cultured in standard growth media, which promotes proliferation on two-dimensional (2D) surfaces and avoids any preferential differentiation. First, murine C2C12 myoblasts showed specific myogenic differentiation. Human mesenchymal stem cells (hMSCs) of adipose and bone marrow origin, which can differentiate toward a wider variety of lineages, showed again myodifferentiation. Overall, this study shows myogenic differentiation in normal growth media for several cell types under SW conditions, avoiding the use of growth factors and cytokines, i.e., solely by culturing cells within the SW environment. Mechanistically, it provides further insights into the balance between integrin adhesion to the dorsal substrate and the confinement imposed by the SW system.

[EN] Novel biomaterials are needed for bone tissue repair with improved mechanical performance compared to classical bioceramics. The objective of this work was to characterize a hybrid filler material, which is capable to coat as a thin film porous scaffolds improving their mechanical properties for bone tissue engineering. The hybrid filler material is a blend of chitosan and silica network formed through in situ sol-gel using tetraethylortosilicate and 3-glycidoxypropyltrimethoxysilane (GPTMS) as silica precursors. The hypothesis was that the epoxy ring of GPTMS could react with the amino groups of chitosan in acidic media while it is also reacting the siloxane groups of hydrolyzed silica precursors. The formation of the hybrid organic-inorganic network was assessed by different physical techniques revealing changes in molecular mobility and hydrophilicity upon chemical reaction. Finally, the cytotoxicity of the samples was also evaluated by MTT assay. (c) 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015, 53, 1391-1400

Polycaprolactone porous membranes were obtained by freeze extraction of dioxane from polycaprolactone-dioxane solid solutions. Porosities as high as 90% with interconnected structures were obtained by this technique. A silica phase was synthesized inside the pores of the polymer membrane by sol-gel reaction using tetraethylorthosilicate (TEOS) as a silica precursor and catalyzed in acidic and basic conditions. Two different morphologies of the inorganic phase were obtained depending on the type of catalyst. In acid catalyzed sol-gel reaction, a homogeneous layer of silica was deposited on the pores, and discrete microspheres were synthesized on the pore walls when a basic catalyst was used. The morphology of the inorganic phase influenced the mechanical and thermal behavior, as well as the hydrophilic character of the composites. Bioactivity of the porous materials was tested in vitro by measuring the deposition of hydroxyapatite on the surfaces of the porous composite membranes. Polycaprolactone/silica composites revealed a superior bioactivity performance compared with that of the pure polymer; evidenced by the characteristic cauliflower structures on the material surface, increase in weight and Ca/P ratio of the hydroxyapatite layer. Also, the acid catalyzed composites presented better bioactivity than the base catalyzed composites, evidencing the importance in the morphology of the silica phase. (C) 2014 Elsevier B.V. All rights reserved.

The aim of this work is to develop polycaprolactone based porous materials with improved mechanical performance to be used in bone repair. The hybrid membranes consist in a polymeric porous material in which the pore walls are coated by a silica thin layer. Silica coating increases membrane stiffness with respect to pure polymer but in addition filling the pores of the polymer with a silica phase improves bioactivity due to the delivery of silica ions in the neighborhood of the material in vivo. Nevertheless silica network, even that produced by sol-gel, might be too stiff and brittle what is not desirable for its performance as a coating. In this work we produced a toughened silica coating adding chitosan and 3-glycidoxypropyltrimethoxysilane (GPTMS) to the precursor solution looking for having polymer chains linked by covalent bonding to the silica network. Hybrid polymer-silica coating was produced by in situ sol-gel reaction using Tetraethyl orthosilicate (TEOS), GPTMS and chitosan. Chemical reaction between amine groups of chitosan chains and epoxy groups of GPTMS allowed covalent bonding of polymer chains to the silica network. Physical properties of the hybrid membranes were characterized and cell attachment of MC3T3-E1 pre-osteoblastic cells on the surface of these supports was assessed.

Polycaprolactone/silica microporous hybrid membranes were produced in two steps: A microporous polycaprolactone membrane with an interconnected porosity of 80% was obtained via a freeze extraction procedure, then silica was formed by a sol-gel reaction inside the micropores using tetraethyl orthosilicate, TEOS, as silica precursor. It is shown that silica forms a thin coating layer homogeneously distributed over the pore walls when sol-gel reaction is catalyzed by hydrochloric acid, while it forms submicron spherical particles when using basic catalyzer. Some physical properties and the viability and osteoblastic differentiation of bone marrow rat mesenchymal stem cells cultured on pure and hybrid membranes were studied.

Hybrid porous membranes of polycaprolactone (PCL) and silica were obtained by a two stage procedure. First a porous PCL membrane was produced by freeze extraction technique and then a sol-gel reaction was used to form a uniform silica coating on the pore walls. Sol-gel reaction was performed at low pH with tetraethylorthosilicate (TEOS) as the precursor of silica. In this work we analyze the influence of several clue parameters on the silica film formation and in turn on the properties of the hybrid material. Water: TEOS molar ratio and drying protocol were considered in this study.