Search

A new spherical form of resorcinol‐formaldehyde (RF) resin was tested for efficacy of cesium removal from Hanford tank waste. Two spherical RF formulations, prepared by varying curing temperature, were tested. Both resins had a tight particle size distribution and a high degree of sphericity. Small‐scale column testing (on ∼20‐mL resin beds) was conducted evaluating the cesium load profile with AZ‐102 simulated tank waste and the cesium elution profile using 0.5 M HNO3 eluant. The load and elution profiles were compared in side‐by‐side testing with ground‐gel RF resin and SuperLig® 644, the Waste Treatment Plant baseline ion exchanger. Although breakthrough capacity was not as high as the other resins tested, the spherical RF resin met plant cesium loading requirements with the AZ‐102 simulant matrix. Excellent reproducibility of cesium load and elution was demonstrated over three process cycles with no evidence of degraded performance. Residual cesium on the resin beds after elution was nearly a...

This data package contains the K Basin sludge characterization results obtained by Pacific Northwest National Laboratory during processing and analysis of four sludge core samples collected from Engineered Container SCS-CON-210 in 2010 as requested by CH2M Hill Plateau Remediation Company. Sample processing requirements, analytes of interest, detection limits, and quality control sample requirements are defined in the KBC-33786, Rev. 2. The core processing scope included reconstitution of a sludge core sample distributed among four to six 4-L polypropylene bottles into a single container. The reconstituted core sample was then mixed and subsampled to support a variety of characterization activities. Additional core sludge subsamples were combined to prepare a container composite. The container composite was fractionated by wet sieving through a 2,000 micron mesh and a 500-micron mesh sieve. Each sieve fraction was sampled to support a suite of analyses. The core composite analysis scope included density determination, radioisotope analysis, and metals analysis, including the Waste Isolation Pilot Plant Hazardous Waste Facility Permit metals (with the exception of mercury). The container composite analysis included most of the core composite analysis scope plus particle size distribution, particle density, rheology, and crystalline phase identification. A summary of the received samples, core sample reconstitutionmore » and subsampling activities, container composite preparation and subsampling activities, physical properties, and analytical results are presented. Supporting data and documentation are provided in the appendices. There were no cases of sample or data loss and all of the available samples and data are reported as required by the Quality Assurance Project Plan/Sampling and Analysis Plan.« less