Search

Human bone has shown to have luminescent properties that remain throughout the phases of cremation, with the exception of fully carbonized bone, when excited with a narrow band light source. During this research, an alternate light source (420–470nm, peak at 445nm) was used to visualize and investigate latent details relevant for forensic investigations of human remains recovered at fire scenes. As fire is a destructive force, it induces a vast variety of physical and chemical alterations to all components of the bone, making the subsequent analysis and interpretation of burned human remains challenging. A spectral shift in emission bandwidth, from green to red, was previously observed when the exposure temperature increased from 700 to 800 °C. This spectral shift was reproduced on a total of 10 human forearms, divided into 20 segments, by burning at 700 °C and 900 °C in an ashing furnace. The shift of emission bandwidth caused only by an increase in temperature was furthermore investigated by colorimetric analysis, proving the spectral shift to be significant. By easily quantifying the spectral shift, substantiation is provided for the use of this technique in practice to improve the interpretation of heat induced changes of bone.

Abstract To investigate the differences between pre- and post-fire fractures, 30 human forearm bones were subjected to either blunt-force impact, burning, or both. Bones, covered in soft tissue and wrapped in clothing, were burned in a reconstructed house fire. The burning context and dynamics led to differential burning, that was equal amongst the three groups. To evaluate the damage to the bones, a data collection sheet was developed based on the current literature on fracture features. To analyze the relation between exposure temperature and fracture class and occurrence, color was measured to estimate the exposure temperature. Observable and measurable changes on bone, and fracture surfaces, were macro- and microscopically analyzed. Many features overlapped between the three groups, and thus are not usable for differentiation. Fractures caused by blunt force impact (post-mortem, pre-fire) showed a rough fracture surface with smoothness in curved/slanted regions near the margin after burning, while heat-induced bone fractures showed a smooth fracture surface. The margins and surface of bone fractures that originated after the fire (indirect heat-induced) were evenly discolored, whereas heat-induced bone fractures showed uneven discoloration of the fracture margin and surface. Although there were generally more heat-induced fractures in the 450–700 °C range, no other distinctive trend was observed between exposure temperature and class of fractures.

Salvaging burned human remains can be a challenging task for the forensic specialists, and interpreting evidence from thermally altered skeletal elements can be difficult. Based on the results presented in this dissertation more is possible than was previously known. In this dissertation, novel ways of finding and analyzing burned human remains are presented to the field of forensic anthropology.This thesis introduces new methods to collect and differentiate cremated bone from construction debris from a fire scene, and estimate the exposure temperature that bones have been exposed to – which is important for forensic investigation. Further, this dissertation provides the reader with new knowledge on heat induced biophysical changes and characteristics that aids the interpretation of skeletal damage that occurred before, during or after the fire. It is important for new methods in forensic practice to comply with legal standards. Accordingly, the value of the presented methods for practice in both the field and the courtroom are thoroughly discussed to inform both the forensic practitioner as well as the legal experts.

Throughout the years an increase has been observed in research output on biochemical markers for determining the postmortem interval (PMI). However, to date, a complete overview is missing on the results of postmortem biochemical markers (PBM''s) for PMI estimation. In this paper, literature was reviewed in order to identify the knowledge lacunae of PBM research from a practical point of view. A three-step approach was undertaken in order to achieve the set goal. Literature was collected, the PBM''s were evaluated for completeness by means of a scorings index based on set criteria, and PBM''s were subsequently evaluated in light of the Daubert & Frye criteria for scientific evidence in court. Seven PBM''s were found to be well investigated, from which potassium had the highest completion score. However, none of these PBM''s could be qualified as suitable for court evidence. Further, this study revealed that the majority of PBM''s (94%) is not well investigated. Consequently, these PBM''s did not meet Daubert & Frye criteria. In order to improve the assessment for use of PBM''s as evidence in court regarding PMI estimation, PBM''s should be investigated more thoroughly and data should be made readily available.

Bone has photoluminescent characteristics that can aid the analysis of thermally altered human skeletal remains as part of the forensic anthropological investigation. Photoluminescence stands collectively for fluorescence and phosphorescence. Because the difference in lifetime between fluorescence and phosphorescence is usually in the range of nano- to microseconds, it is only possible to visually determine whether bone phosphoresces when the lifetime is long enough to be observed. For this study, a distinction was made between long-decay and short-decay phosphorescence. So far, it was unknown whether (thermally altered) human bone emits long-decay phosphorescence after being illuminated and, thus, whether phosphorescence contributes to the observed photoluminescence. If so, whether the observable phosphorescence is dependent on temperature, exposure duration, surrounding medium, bone type, skeletal element, and excitation light and could aid the temperature estimation of heated bone fragments. In this study, bone samples were subjected to heat in the range of from room temperature to 900 °C for various durations in either air or adipose as surrounding medium. In addition, different skeletal elements of a human cadaver were recollected after cremation in a crematorium. Both sample collections were illuminated with light of different bandwidths and visually inspected for phosphorescence and photoluminescence. The samples were scored by means of a scoring index for the intensity of long-decay phosphorescence and photographically documented. The results show that thermally altered human bone fragments do phosphoresce. The observed phosphorescence is more dependent on temperature than on exposure duration, surrounding medium or skeletal element. Of the used wavelength bands, ultraviolet light provided the most temperature-related information, showing changes in both phosphorescence intensity and emission spectrum. Long-decay phosphorescence and fluorescence with short-decay phosphorescence coincide; however, there are also temperature-dependent differences. It is therefore concluded that phosphorescence contributes to the observable photoluminescence and that the visibly observable phosphorescent characteristics can aid the temperature estimation of cremated human skeletal fragments. Supplementary Information The online version contains supplementary material available at 10.1007/s00414-020-02455-1.

A taphonomic research facility for the study of human remains was recently realized in Amsterdam, the Netherlands, to systematically investigate the decomposition of the human body under known conditions. Governmental authorization was obtained to make use of the body donation program of the Amsterdam University Medical Centers, location Academic Medical Center, for this specific purpose. In contrast to the small number of comparable initiatives elsewhere, this facility specifically allows for the study of buried bodies e.g. with the use of telemetry and remote sensing. Here, we discuss the concept of body donation in the Netherlands, its role in taphonomic research, and the sequence of events that preceded the realization of this facility, which is the first of its kind in Europe. In addition to offering novel research options to the scientific community, we hope that it will also pave the way for the successful realization of similar initiatives in other locations.

When a capital crime is committed the post-mortem interval (PMI) is of particular importance in investigating a suspect's alibi in court. A forensic expert can use different methods to estimate the PMI. This research focuses on who is considered an expert in court and whether the methods used to estimate the PMI are reliable. In this study, the methods used to estimate the PMI and the experts consulted, available in Dutch jurisprudence, in the period 2010-2019 were investigated. Ninety-four judicial cases were included and multiple experts and methods of estimating the PMI were found. As part of this study, the methods that were used to estimate the PMI in court were subjected to the Daubert criteria. Of these methods, only the Henssge nomogram and entomological methods met the Daubert criteria. However, the methods are only useful when applied by the right forensic expert and in the right manner. Unfortunately, this was not always the case.

At this moment, no method is available to objectively estimate the temperature to which skeletal remains have been exposed during a fire. Estimating this temperature can provide crucial information in a legal investigation. Exposure of bone to heat results in observable and measurable changes, including a change in colour. To determine the exposure temperature of experimental bone samples, heat related changes in colour were systemically studied by means of image analysis. In total 1138 samples of fresh human long bone diaphysis and epiphysis, varying in size, were subjected to heat ranging from room temperature to 900 °C for various durations and in different media. The samples were scanned with a calibrated flatbed scanner and photographed with a Digital Single Lens Reflex camera. Red, Green, Blue values and Lightness, A-, and B-coordinates were collected for statistical analysis. Cluster analysis showed that discriminating thresholds for Lightness and B-coordinate could be defined and used to construct a model of decision rules. This model enables the user to differentiate between seven different temperature clusters with relatively high precision and accuracy. The proposed decision model provides an objective, robust and non-destructive method for estimating the exposure temperature of heated bone samples.