Search

In this paper, we introduce a variant of Francis Su's "Game of Cycles," that we call "Cycles with Sources." The only change to the rules is permitting nodes to be sources, while sinks are still prohibited. Despite this minor change in the rules, we show that even on simple games, like line graphs, there is a great change in the outcome of optimal play, which we fully analyze using Sprague-Grundy Theory.

Coupling between light and matter strongly depends on the polarization of the electromagnetic field and the nature of the excitations in the material. As hybrid perovskites emerge as a promising class of materials for light-based technologies like LEDs, lasers, and photodetectors, understanding the microscopic details of how photons couple to matter is critical. While most optical studies have focused on the spectral content and quantum efficiency of emitted photons in various hybrid perovskite thin-film and nanoscale structures, few studies have explored other properties of the emitted photons such as polarization and emission angle. Here, we use angle-resolved cathodoluminescence microscopy to access the full polarization state of photons emitted from large-grain hybrid perovskite films with spatial resolution well below the optical diffraction limit. Mapping the Stokes parameters as a function of the emission angle in a thin film, we reveal the effect of a grain boundary on the degree of polarization and angle at which the photons are emitted. This exploration of angle- and polarization-resolved emission near grain boundaries provides an improved understanding of the emission properties of hybrid perovskites in thin film geometries -- a necessary investigation for subsequent engineering of subwavelength nanophotonic structures using the hybrid perovskite class of materials., Comment: 17 pages, 5 figures

With hybrid organic-inorganic perovskites increasing its technological reach, from photovoltaics solar cells to light-emitting devices, to nanoscale transistors, it is critical to establish the role of microstructures in dictating how carrier dynamics dictate device efficiency. Here we report on the ultrafast dynamics of charge carriers in hybrid perovskites at various stages of nucleation and growth kinetics. A solution-processed fabrication technique, with spin-coating conditions optimized to control the nucleation density of an intermediate phase, converts to hybrid perovskites upon a temperature gradient annealing. This strategy decouples the nucleation and growth steps that lead eventually to large-grain thin films, allowing us to probe electronic and carrier dynamic differences. We find, surprisingly, that the nucleating microcrystals already display the electronic properties of hybrid perovskites and share similar femtosecond-to-nanosecond dynamics as large-grain hybrid perovskite thin films.

This paper documents the experience improving the performance of a data processing workflow for analysis of the Human Connectome Project's HCP900 data set. It describes how network and compute bottlenecks were discovered and resolved during the course of a science engagement. A series of computational enhancements to the stock FSL BedpostX workflow are described. These enhancements migrated the workflow from a slow serial execution of computations resulting from Slurm scheduler incompatibilities to eventual execution on GPU resources, going from a 21-day execution on a single CPU core to a 2 hour execution on a GPU. This workflow contributed a vital use-case to the build-out of the campus compute cluster with additional GPUs and resulted in enhancements to network bandwidth. It also shares insights on potential improvements to distribution of scientific software to avoid stagnation in site-specific deployment decisions. The discussion highlights the advantages of open licenses and popular code collaboration sites like GitHub.com in feeding contributions upstream., Comment: 6 pages, 3 figures, PEARC '18: Practice and Experience in Advanced Research Computing, July 22--26, 2018, Pittsburgh, PA, USA

Directional harmonic generation is an important property characterizing the ability of nonlinear optical antennas to diffuse the signal in well-defined region of space. Herein, we show how sub-wavelength facets of an organic molecular mesowire crystal can be utilized to systematically vary the directionality of second harmonic generation (SHG) in the forward scattering geometry. We demonstrate this capability on crystalline diamonoanthraquinone (DAAQ) mesowires with subwavelength facets. We observed that the radial angles of the SHG emission can be tuned over a range of 130 degrees. This angular variation arises due to spatially distributed nonlinear dipoles in the focal volume of the excitation as well as the geometrical cross-section and facet orientation of the mesowire. Numerical simulations of the near-field excitation profile corroborate the role of the mesowire geometry in localizing the electric field. In addition to directional SHG from the mesowire, we experimentally observe optical waveguiding of the nonlinear two-photon excited fluorescence (TPEF). Interestingly, we observed that for a given pump excitation, the TPEF signal is isotropic and delocalized, whereas the SHG emission is directional and localized at the location of excitation. All the observed effects have direct implications not only in active nonlinear optical antennas, but also in nonlinear signal processing., Comment: Accepted in Applied Optics

Single-molecule surface enhanced Raman scattering (SM-SERS) is one of the vital applications of plasmonic nanoparticles. The SM-SERS sensitivity critically depends on plasmonic hot-spots created at the vicinity of such nanoparticles. In conventional fluid-phase SM-SERS experiments, plasmonic hot-spots are facilitated by chemical aggregation of nanoparticles. Such aggregation is usually irreversible, and hence, nanoparticles cannot be re-dispersed in the fluid for further use. Here, we show how to combine SM-SERS with plasmon-polariton assisted, reversible assembly of plasmonic nanoparticles at an unstructured metal-fluid interface. One of the unique features of our method is that we use a single evanescent-wave optical excitation for nanoparticle-assembly, manipulation and SM-SERS measurements. Furthermore, by utilizing dual excitation of plasmons at metal-fluid interface, we create interacting assemblies of metal nanoparticles, which may be further harnessed in dynamic lithography of dispersed nanostructures. Our work will have implications in realizing optically addressable, plasmofluidic, single-molecule detection platforms.

We discuss two aspects of the plasmofluidic assembly of plasmonic nanostructures at the metal fluid interface. First, we experimentally show how three and four spot evanescent wave excitation can lead to unconventional assembly of plasmonic nanoparticles at the metal fluid interface. We observed that the pattern of assembly was mainly governed by the plasmon interference pattern at the metal fluid interface, and further led to interesting dynamic effects within the assembly. The interference patterns were corroborated by 3D finite difference time domain simulations. Secondly, we show how anisotropic geometry, such as Ag nanowires, can be assembled and aligned in unstructured and structured plasmofluidic fields. We found that by structuring the metal-film, Ag nanowires can be aligned at the metal fluid interface with a single evanescent wave excitation, thus highlighting the prospect of assembling plasmonic circuits in a fluid. An interesting aspect of our method is that we obtain the assembly at locations away from the excitation points, thus leading to remote assembly of nanostructures. The results discussed herein may have implications in realizing a platform for reconfigurable plasmonic metamaterials, and a test-bed to understand the effect of plasmon interference on assembly of nanostructures in fluids., Comment: This article is part of the themed collection: Nanoparticle Assembly: From Fundamentals to Applications

Vertical nanowires facilitate an innovative mechanism to channel the optical field in the orthogonal direction and act as a nanoscale light source. Subwavelength, vertically oriented nanowire platforms, both of plasmonic and semiconducting variety can facilitate interesting far field emission profiles and potentially carry orbital angular momentum states. Motivated by these prospects, in this letter, we show how a hybrid plasmonic - organic platform can be harnessed to engineer far field radiation. The system that we have employed is an organic nanowire made of diaminoanthroquinone grown on a plasmonic gold film. We experimentally and numerically studied angular distribution of surface plasmon polariton mediated emission from a single, vertical organic nanowire by utilising evanescent excitation and Fourier plane microscopy. Photoluminescence and elastic scattering from single nanowire was analysed individually in terms of in plane momentum states of the outcoupled photons. We found that the emission is doughnut shaped in both photoluminescence and elastic scattering regimes. We anticipate that the discussed results can be relevant in designing efficient, polariton-mediated nanoscale photon sources which can carry orbital angular momentum states., Comment: Optics Letters (accepted), 2018