Search

In the context of intelligent and integrative lighting, in addition to the need for color quality and brightness, the non-visual effect is essential. This refers to the retinal ganglion cells (ipRGCs) and their function, which were first proposed in 1927. The melanopsin action spectrum has been published in CIE S 026/E: 2018 with the corresponding melanopic equivalent daylight (D65) illuminance (mEDI), melanopic daylight (D65) efficacy ratio (mDER), and four other parameters. Due to the importance of mEDI and mDER, this work synthesizes a simple computational model of mDER as the main research objective, based on a database of 4214 practical spectral power distributions (SPDs) of daylight, conventional, LED, and mixed light sources. In addition to the high correlation coefficient R² of 0.96795 and the 97% confidence offset of 0.0067802, the feasibility of the mDER model in intelligent and integrated lighting applications has been extensively tested and validated. The uncertainty between the mEDI calculated directly from the spectra and that obtained by processing the RGB sensor and applying the mDER model reached ± 3.3% after matrix transformation and illuminance processing combined with the successful mDER calculation model. This result opens the potential for low-cost RGB sensors for applications in intelligent and integrative lighting systems to optimize and compensate for the non-visual effective parameter mEDI using daylight and artificial light in indoor spaces. The goal of the research on RGB sensors and the corresponding processing method are also presented and their feasibility is methodically demonstrated. A comprehensive investigation with a huge amount of color sensor sensitivities is necessary in a future work of other research.

The circadian stimulus is an important, validated and updated metric that describes the invisible influences of light on the human circadian system explicitly and scientifically. However, an absolute spectral power distribution must be supplied for its computation, which is only measurable by an expensive and complicated spectrometer. This paper proposes an alternative circadian stimulus computation model that is identified as the function CS(z, Eᵥ) for white light sources based on the most common and simplest parameters of illuminance Ev in lux and the chromaticity coordinate z. These parameters are well known and widely used in both colour science and lighting technology. In order to prove the accuracy and availability of the model, an internal validation was performed with the adapted method repeating split data to check the goodness of the model fit. The fitted model achieved a maximum residual of 0.058 in the circadian stimulus quantity (R²= 0.998). An external validation with the maximum residual of 0.030 (R² = 0.999) provided stronger evidence for the usability of the model in applications.

The three main tasks of modern lighting design are to support the visual performance, satisfy color emotion (color quality), and promote positive non-visual outcomes. In view of large-scale applications, the use of simple and inexpensive RGB color sensors to monitor related visual and non-visual illumination parameters seems to be of great promise for the future development of human-centered lighting control systems. In this context, the present work proposes a new methodology to assess the circadian effectiveness of the prevalent lighting conditions for daylight and artificial light sources in terms of the physiologically relevant circadian stimulus (CS) metric using such color sensors. In the case of daylight, the raw sensor readouts were processed in such a way that the CIE daylight model can be applied as an intermediate step to estimate its spectral composition, from which CS can eventually be calculated straightforwardly. Maximal CS prediction errors of less than 0.0025 were observed when tested on real data. For artificial light sources, on the other hand, the CS approximation method of Truong et al. was applied to estimate its circadian effectiveness from the sensor readouts. In this case, a maximal CS prediction error of 0.028 must be reported, which is considerably larger compared to daylight, but still in an acceptable range for typical indoor lighting applications. The use of RGB color sensors is thus shown to be suitable for estimating the circadian effectiveness of both types of illumination with sufficient accuracy for practical applications.

Modern agriculture demands for comprehensive information about the plants themselves. Conventional chemistry-based analytical methods—due to their low throughput and high associated costs—are no longer capable of providing these data. In recent years, remote reflectance-based characterisation has become one of the most promising solutions for rapid assessments of plant attributes. However, in many cases, expensive equipment is required because accurate quantifications need assessments of the full reflectance spectrum. In this experimental study, we examined the versatility of visible spectral sensors as alternative reflectance measuring devices for biological/biochemical quantifications of sweet basil (Ocimum basilicum). Our results confirm the applicability and scope of visible spectral sensors for analysis and quantification of important plant properties, in particular the contents of valuable substances, such as phenolic compounds and flavonoids.