Search

Background: Along electric distribution corridors in urban-exurban landscapes, forest edges are susceptible to damage associated with storm events. Disturbances and management interventions designed to preempt their effects (e.g., tree trimming) alter characteristics of tree structure and morphology (e.g., branch and crown structure), which may be associated with tree failure and likelihood of associated infrastructure damage. This study assessed the relationship between 3-dimensional tree crown structure and tree biomechanics and characterized the effect of utility tree trimming on tree sway dynamics using terrestrial laser scanning (TLS). Methods: In this study we extracted and analyzed measures of crown structure (i.e., crown asymmetry, crown area, total volume, crown diameter to height ratio, and crown evenness) for individual trees during leaf-off conditions before and after implementation of tree trimming and linked these measures to tree biomechanics data, to evaluate how commonly implemented trimming practices affect both tree sway frequency and displacement--important indicators of tree stability. Results: Results illustrated the effects of common tree trimming practices on tree crown structure, but there were not consistent changes to tree movement characteristics directly following tree trimming across our 24 study trees. However, we found that the associated changes in crown structure through tree trimming affected tree displacement in moderate wind conditions. Additionally, we found there were no significant differences between frequencies across treatment types. Conclusions: This pilot project lays the foundation for understanding the intricate relationship between 3-dimensional crown structure and tree biomechanics following roadside tree trimming. [ABSTRACT FROM AUTHOR]

Introduction: Cannabis sativa L. inflorescences are widely used in the medicinal field as treatments for a variety of symptoms and illnesses due to their unique phytochemicals such as cannabinoids and terpenes. Common postharvest procedures for cannabis inflorescence include trimming, followed by drying, curing, and subsequent storage. The postharvest trimming step, particularly its timing (pre- or post-drying) and the extent of trimming, is not optimally refined in terms of its impact on the cannabinoid and terpene content. In this study, our objective was to identify the optimal trimming conditions for a commercially available medicinal cannabis hybrid chemovar, with the goal of maximizing its cannabinoid and terpene content. Methods: To achieve this, we investigated the effects of pre- versus post-drying trimming and evaluated the impact of mild versus aggressive trimming prior to drying on the cannabinoid and terpene profiles using liquid and gas chromatography. Results: Our results indicated that pre-drying mild trimming yielded the highest cannabinoid concentration, possibly due to optimal balance between stress signals and precursor influx from the sugar leaves to the inflorescence. On the other, post-drying trimming yielded the highest terpene content. Conclusion: Identifying the optimal trimming conditions that maximize both cannabinoid and terpene levels in cannabis is challenging. Therefore, growers face a decision in their trimming practices: to prioritize either enhanced cannabinoid content or increased aromatic terpene concentrations, as optimizing for both simultaneously appears to be difficult.

Summary: The equine foot evolved to provide an effective interface between the distal limb and the ground for weight‐bearing, shock absorption and providing traction. The use of horseshoes became necessary when horses performed a lot of work on abrasive surfaces. These days, however, most equine athletes train and compete on soft, manufactured surfaces that are conducive to having the horses barefooted, especially if they have good‐quality hooves and can be taken out of work for a short period of time while the hoof goes through the adaptive process. Being barefoot for a period of time is often useful in treating horses with chronic foot lameness, hoof capsule distortions with compromised heel structures, sheared heels or frogs that are either recessed or prolapsed relative to the ground surface of the foot. The benefits of being barefooted include superior shock absorption, better energy damping and improved weight‐bearing ability. Without shoes, the foot undergoes greater expansion and vertical movement at the heels and foot shape is maintained by friction and wear between the entire solar surface of the foot and the ground. Shaping the barefoot hoof involves removing excessive hoof wall using hoof nippers at an angle of 45° dorsal to the sole‐wall junction (white line) to create a bevel in the bearing surface of the hoof wall. The heels are rasped horizontally to the same horizontal plane as the frog which makes the palmar foot 'load sharing'. Starting at the heel quarter, the rasp is used around the circumference of the foot at a 45° angle and then a rounding motion from proximal to distal is used to produce a thick rounded perimeter to the distal hoof wall. It is important to leave all the horn/mass on the solar surface of the foot for protection. Adaptation to being barefoot requires a period of time to allow the structures of the foot to strengthen along with reshaping of the foot at 3–4‐week intervals. A version of this manuscript was presented at the American Association of Equine Practitioners Scientific Program in 2023. [ABSTRACT FROM AUTHOR]

In the poultry industry, the evisceration stage often sees the highest microbial load on chicken carcasses. While manual trimming has traditionally been employed to remove gastrointestinal contamination, Brazilian legislation allows the use of a carcass washing system as an alternative. This study aimed to establish and validate a protocol for the use of a chicken carcass washing system as a replacement for manual trimming in a major poultry processing facility in southern Brazil. The methodology followed international standards for microbial analysis such as total mesophilic counts and Enterobacteriaceae. Comparing contamination levels before and after treatments, significant reductions are seen. Manual trimming reduced contamination by 39.43% (gastric), 53% (fecal), and 50% (biliary). Washing achieved greater reductions, with a 96.37% drop in gastric contamination and complete elimination (100%) of fecal contamination. These results met statistical significance. Both procedures reduced contamination levels. Manual trimming maintained 50% of samples below the mean value without exceeding upper control limits (UCL). Washing increased the percentage of samples below the mean value from 46% to 54%, demonstrating its superior efficiency. For Enterobacteriaceae, trimming maintained 44% of samples below the mean value, and washing increased it from 46% to 48%. In conclusion, the carcass washing system effectively removes visible gastrointestinal contents, meeting regulatory standards and receiving authorization from the Federal Inspection Service for use in the facility. [ABSTRACT FROM AUTHOR]

As a machining tool with great potential, abrasive water jet (AWJ) has been used extensively in cutting many types of difficult-to-cut materials. Actually, using AWJ to trim workpieces is another important application. Unlike other traditional machining tools, which do not make much difference in machining surface through cutting or trimming, the AWJ, a soft knife, would lead to a different shape profile on the machining side in the trimming process other than cutting. To explore the trimming process of AWJ, a specific method of modeling the shape profile of the machining side trimmed by AWJ is proposed in this paper. Firstly, a criterion has been built to classify whether it is a cutting task or an edge trimming task. After that, a series of experiments have been carried out to obtain how the AWJ cutting parameters affect the trimming process. Based on the experimental results, the key parameters affecting the trimming process have been found. Further, a mathematical model for trimming process has been built and its effectiveness has been verified through actual trimming. With this model, the shape error of the machining side trimmed by AWJ can be further reduced by adjusting the compensation parameters. [ABSTRACT FROM AUTHOR]

The abrasive waterjet machining process was introduced in the 1980s as a new cutting tool; the process has the ability to cut almost any material. Currently, the AWJ process is used in many world-class factories, producing parts for use in daily life. A description of this process and its influencing parameters are first presented in this paper, along with process models for the AWJ tool itself and also for the jet–material interaction. The AWJ material removal process occurs through the high-velocity impact of abrasive particles, whose tips micromachine the material at the microscopic scale, with no thermal or mechanical adverse effects. The macro-characteristics of the cut surface, such as its taper, trailback, and waviness, are discussed, along with methods of improving the geometrical accuracy of the cut parts using these attributes. For example, dynamic angular compensation is used to correct for the taper and undercut in shape cutting. The surface finish is controlled by the cutting speed, hydraulic, and abrasive parameters using software and process models built into the controllers of CNC machines. In addition to shape cutting, edge trimming is presented, with a focus on the carbon fiber composites used in aircraft and automotive structures, where special AWJ tools and manipulators are used. Examples of the precision cutting of microelectronic and solar cell parts are discussed to describe the special techniques that are used, such as machine vision and vacuum-assist, which have been found to be essential to the integrity and accuracy of cut parts. The use of the AWJ machining process was extended to other applications, such as drilling, boring, milling, turning, and surface modification, which are presented in this paper as actual industrial applications. To demonstrate the versatility of the AWJ machining process, the data in this paper were selected to cover a wide range of materials, such as metal, glass, composites, and ceramics, and also a wide range of thicknesses, from 1 mm to 600 mm. The trends of Industry 4.0 and 5.0, AI, and IoT are also presented. [ABSTRACT FROM AUTHOR]

Clustering is one of the most widely used unsupervised learning techniques. However, it is well‐known that outliers can have a significantly adverse impact on commonly applied clustering methods. On the other hand, clustered outliers can be particularly detrimental to (even robust) statistical procedures. Therefore, it makes sense to combine concepts from Robust Statistics and Cluster Analysis to deal with both clusters and outliers simultaneously through robust clustering approaches. Among the existing robust clustering techniques, we focus on those that rely on (impartial) trimming. Trimming offers the user an easy interpretation, as standard well‐known clustering methods are applied after a fraction of the potentially most outlying observations is removed. This trimming approach, when combined with appropriate constraints on the clusters' dispersion parameters, has shown a good performance and can be implemented efficiently thorough available algorithms. This article is categorized under:Statistical Learning and Exploratory Methods of the Data Sciences > Clustering and ClassificationStatistical and Graphical Methods of Data Analysis > Robust Methods [ABSTRACT FROM AUTHOR]

This paper introduces an Acoustic Emission (AE)-based monitoring method designed for supervising the Abrasive Waterjet Cutting (AWJC) process, with a specific focus on the precision cutting of Carbon Fiber-Reinforced Polymer (CFRP). In industries dealing with complex CFRP components, like the aerospace, automotive, or medical sectors, preventing cutting system malfunctions is very important. This proposed monitoring method addresses issues such as reductions or interruptions in the abrasive flow rate, the clogging of the cutting head with abrasive particles, the wear of cutting system components, and drops in the water pressure. Mathematical regression models were developed to predict the root mean square of the AE signal. The signal characteristics are determined, considering key cutting parameters like the water pressure, abrasive mass flow rate, feed rate, and material thickness. Monitoring is conducted at both the cutting head and on the CFRP workpiece. The efficacy of the proposed monitoring method was validated through experimental tests, confirming its utility in maintaining precision and operational integrity in AWJC processes applied to CFRP materials. Integrating the proposed monitoring technique within the framework of digitalization and Industry 4.0/5.0 establishes the basis for advanced technologies such as Sensor Integration, Data Analytics and AI, Digital Twin Technology, Cloud and Edge Computing, MES and ERP Integration, and Human-Machine Interface. This integration enhances operational efficiency, quality control, and predictive maintenance in the AWJC process. [ABSTRACT FROM AUTHOR]

A suitable probability distribution is required to quantify and estimate hydraulic structure design for risk evaluation and management. The inability of model selection criteria to differentiate, in some cases, among candidate distributions used in the analysis of hydrological extremes is often criticised. This study verifies, with the aid of model selection techniques, the potential utility of trimming and subsampling in distinguishing between candidate distributions, which might not be feasible using the traditional goodness of fit method alone, when samples available are small. The performance of the proposed method is evaluated through its application to real and simulated yearly peak rainfall datasets. The proposed approach is then compared with several standard model selection techniques. Results show that the model selection techniques with the aid of subsampling are effective in identifying the true parent distribution for the untrimmed samples given a two-parameter distribution; contrarily, they are inefficient where a distribution with a three-parameter is the parent distribution. However, as trimming is introduced, all model selection methods recognise the true parent distribution for a three-parameter distribution. Overall, utilising trimming and subsampling with the aid of model selection methods yields promising outcomes in the analysis of hydrological extreme frequencies. Drawing from the results of numerical simulation and examination of observed data, the use of trimming and subsampling can be a viable tool in differentiating among candidate distributions used in the investigation of hydrological extreme frequencies.

Innovative design of complex systems faces multi-contradiction (MC). The existing methods to solve MC are mainly based on the General Theory of Powerful Thinking (OTSM) which is independent of the classical Engineering Design Method (ED) to form the process model, they cannot inherit the accumulated knowledge and advantages of ED. This paper proposes a product innovation design process model for MC based on the function-structure model. It starts with an initial scenario of the system to build the function-structure model and MC network based on the root contradiction analysis. The network structure entropy and function importance decision methods are introduced for the trimming target confirming. The key contradiction-node is identified and solved by strategies of trimming based on internal and external resources of the system. The function-structure model in ED and trimming in TRIZ are combined to form an innovative design process for MC systems. The proposed method is evaluated in a case study of an innovative design of the girder bridge erector. [ABSTRACT FROM AUTHOR]

Supervised learning algorithms generally assume the availability of enough memory to store data models during the training and test phases. However, this assumption is unrealistic when data comes in the form of infinite data streams, or when learning algorithms are deployed on devices with reduced amounts of memory. In this paper, we adapt the online Mondrian forest classification algorithm to work with memory constraints on data streams. In particular, we design five out-of-memory strategies to update Mondrian trees with new data points when the memory limit is reached. Moreover, we design node trimming mechanisms to make Mondrian trees more robust to concept drifts under memory constraints. We evaluate our algorithms on a variety of real and simulated datasets, and we conclude with recommendations on their use in different situations: the Extend Node strategy appears as the best out-of-memory strategy in all configurations, whereas different node trimming mechanisms should be adopted depending on whether a concept drift is expected. All our methods are implemented in the OrpailleCC open-source library and are ready to be used on embedded systems and connected objects. [ABSTRACT FROM AUTHOR]

An excellent machining performance of electroplated diamond wheel is suitable for trimming process of CFPRs (carbon fiber reinforced plastics) where unnecessary portions of material are cut off. However, chip loading is one of serious problems caused with grinding wheels during the process. In this study, through the experimental investigation under various conditions, it is demonstrated that machining conditions determine the degree of chip loading on the wheel. Experimental results show that the chip loading immediately reaches at very early stage of process and is obstructive to the continuous trimming process. In addition, an in-process laser dressing is proposed as a solution to suppress and the chip loading and to enable highly efficient machining of CFRPs. Influences of laser irradiating parameters are investigated and the feasibility of proposed method is examined.

Abstract Background Lameness has been associated with compromised animal welfare and reduced productivity in dairy cattle herds worldwide. However, little is known about the prevalence of claw lesions in the dairy buffalo population in Egypt. Furthermore, the optimum measurements for claw trimming in buffalo are unknown. A cross-sectional cadaver study was conducted where 135 pair buffalo hind feet were collected from 4 slaughterhouses and examined for the presence of claw lesions. The proportion and associated 95% confidence interval (CI) of each type of lesion were calculated. A separate set of healthy claws (n = 26) underwent ultrasonography (US) and computed tomography (CT). The agreement between US and CT measurements was assessed using Passing-Bablok regression and intraclass correlation coefficient. The CT measurements were used to calculate trimming recommendations. Results At least one lesion was identified in 242 claws (89.6%, 95% CI = 85.4–93.0). In healthy claws, poor to moderate agreement was identified between US and CT measurements which could be due a sample size of the study. The average ± standard deviation (SD) minimum recommended external wall length of the lateral and medial claws in heifers was 7.1 ± 0.36 cm and 7.5 ± 0.35 cm, respectively. The average ± SD minimum recommended external wall length in buffaloes over five years of age was 8.2 ± 0.27 cm and 8.4 ± 0.39 cm for the lateral and medial claws, respectively. Conclusions The study found a high prevalence of claw lesions in buffalo in Egypt, the clinical significance of which requires further elucidation. Recommended measurements will help guide claw trimming in buffalo to minimise lesions.

Abstract Background Hyperuricemia can lead to synovial hyperplasia in the wrist. In severe cases, it can lead to the deposition of gouty stone in the carpal tunnel, resulting in increased pressure in the carpal tunnel and compression of the median nerve to cause carpal tunnel syndrome (CTS), which is called gouty carpal tunnel syndrome (GCTS). As for the surgical treatment of gouty carpal tunnel syndrome, scholars have different opinions on whether it is necessary to remove the superficial flexor tendon. The purpose of this study was to compare the clinical efficacy of trimming and resection of the diseased superficial flexor tendon in the treatment of gouty carpal tunnel syndrome. Methods Clinical data were collected from May 2016 to July 2021 from 10 patients (13 affected wrists) diagnosed with gouty carpal tunnel syndrome and classified into two groups according to the surgical modality: the diseased portion of the gout-eroded superficial finger tendon was trimmed in 9 wrists, and the diseased superficial finger flexor tendon was excised in 4 wrists. Values related to flexion and extension functions, 2-PD, DASH, BCTQ, VAS and recurrence in the affected fingers were compared between the two groups as well as before and after surgery in each group. Results All affected limbs used were cleared of gouty stones, finger numbness improved, no skin necrosis occurred, and all incisions healed at stage I. At follow-up (13.58 ± 5.53 months), there was no significant difference between groups in flexion and extension function, 2-PD, DASH, BCTQ, and VAS with respect to the affected fingers, and patients in both groups improved significantly before and after surgery. Treatment of only one wrist involved trimming to remove lesion-affected portions of tendon, which reappeared 1 year after surgery, and there was one case of poor recovery from greater piriformis muscle atrophy in both procedures. Conclusion Regarding surgical treatment of patients with gouty carpal tunnel syndrome in which the gouty stone has invaded the superficial flexor tendons of the fingers, the diseased superficial flexor tendons can be selectively excised, and the postoperative mobility of the affected fingers may not be impaired.

Tillering/branching pattern plays a significant role in determining the structure and diversity of grass, and trimming has been found to induce tillering in turfgrass. Recently, it has been reported that hydrogen peroxide (H2O2) regulates axillary bud development. However, the role of H2O2 in trimming-induced tillering in bermudagrass, a kind of turfgrass, remains unclear. Our study unveils the significant impact of trimming on promoting the sprouting and growth of tiller buds in stolon nodes, along with an increase in the number of tillers in the main stem. This effect is accompanied by spatial-temporal changes in cytokinin and sucrose content, as well as relevant gene expression in axillary buds. In addition, the partial trimming of new-born tillers results in an increase in sucrose and starch reserves in their leaves, which can be attributed to the enhanced photosynthesis capacity. Importantly, trimming promotes a rapid H2O2 burst in the leaves of new-born tillers and axillary stolon buds. Furthermore, exogenous application of H2O2 significantly increases the number of tillers after trimming by affecting the expression of cytokinin-related genes, bolstering photosynthesis potential, energy reserves and antioxidant enzyme activity. Taken together, these results indicate that both endogenous production and exogenous addition of H2O2 enhance the inductive effects of trimming on the tillering process in bermudagrass, thus helping boost energy supply and maintain the redox state in newly formed tillers. [ABSTRACT FROM AUTHOR]

Background: Lameness has been associated with compromised animal welfare and reduced productivity in dairy cattle herds worldwide. However, little is known about the prevalence of claw lesions in the dairy buffalo population in Egypt. Furthermore, the optimum measurements for claw trimming in buffalo are unknown. A cross-sectional cadaver study was conducted where 135 pair buffalo hind feet were collected from 4 slaughterhouses and examined for the presence of claw lesions. The proportion and associated 95% confidence interval (CI) of each type of lesion were calculated. A separate set of healthy claws (n = 26) underwent ultrasonography (US) and computed tomography (CT). The agreement between US and CT measurements was assessed using Passing-Bablok regression and intraclass correlation coefficient. The CT measurements were used to calculate trimming recommendations. Results: At least one lesion was identified in 242 claws (89.6%, 95% CI = 85.4–93.0). In healthy claws, poor to moderate agreement was identified between US and CT measurements which could be due a sample size of the study. The average ± standard deviation (SD) minimum recommended external wall length of the lateral and medial claws in heifers was 7.1 ± 0.36 cm and 7.5 ± 0.35 cm, respectively. The average ± SD minimum recommended external wall length in buffaloes over five years of age was 8.2 ± 0.27 cm and 8.4 ± 0.39 cm for the lateral and medial claws, respectively. Conclusions: The study found a high prevalence of claw lesions in buffalo in Egypt, the clinical significance of which requires further elucidation. Recommended measurements will help guide claw trimming in buffalo to minimise lesions. [ABSTRACT FROM AUTHOR]

Simple Summary: Lesions of the digits and associated lameness in cattle can not only cause pain and therefore impair animal welfare, but can also result in economic losses. Frequent claw trimming can prevent the development of claw disorders, but documentation of health data of the digits is essential for follow-up. These data are useful not only for farmers, veterinarians and herd health, but also for the establishment of claw health programmes on a regional basis. The objectives of this study were to present comparative prevalence data on painful lesions of the digits from over 700 cattle farms participating in a nationwide claw health programme in Switzerland over a three-year period. Furthermore, this study contributes to the identification of risk factors at the herd- and cow-levels regarding the occurrence of digital dermatitis, ulcers and white line disease in Swiss dairy cows. Factors found to be associated with these lesions may help to improve management factors contributing to better digit health on farms with small herds that have frequent access to pasture, as analysed in this study. The first aim of this study was to calculate the prevalence of painful lesions of the digits ("alarm" lesions; ALs) in Swiss dairy herds and cow–calf operations over a three-year study period. The following ALs were included in the calculation: the M2 stage of digital dermatitis (DD M2), ulcers (U), white line fissures (WLF) of moderate and high severity, white line abscesses (WLA), interdigital phlegmon (IP) and swelling of the coronet and/or bulb (SW). Between February 2020 and February 2023, digit disorders were electronically recorded during routine trimmings by 40 specially trained hoof trimmers on Swiss cattle farms participating in the national claw health programme. The data set used consisted of over 35,000 observations from almost 25,000 cows from 702 herds. While at the herd-level, the predominant AL documented in 2022 was U with 50.3% followed by WLF with 38.1%, at the cow-level, in 2022, it was DD M2 with 5.4% followed by U with 3.7%. During the study period, within-herd prevalences of ALs ranged from 0.0% to a maximum of 66.1% in 2020. The second aim of this study was to determine herd- and cow-level risk factors associated with digital dermatitis (DD), U and white line disease (WL) in dairy cows using data from 2022. While for DD, analysed herd-level factors appeared to have a greater effect on the probability of its occurrence, the presence of U and WL was mainly associated with the analysed cow-level factors. The risk for DD increased with a higher herd trimming frequency. Herds kept in tie stalls had a lower risk for DD and WL and a higher risk for U compared to herds kept in loose housing systems. Herds with predominantly Holstein Friesian cows as well as Holstein Friesian cows had a higher risk for the occurrence of DD compared to herds and cows of other breeds. With increasing parity, cows had a higher risk of developing U and WL, whereas for DD, parity was negatively associated with prevalence. Cows trimmed during the grazing period had a higher risk of U and WL than cows trimmed during the housing period. These findings may contribute to improve management measures affecting the health of the digits in farms with structures similar to those evaluated in the current study, such as small herds with frequent access to pasture. Further research is warranted to demonstrate how measures addressing the current results combined with those of individual herd risk assessments might contribute to an improvement in the health of the digits in the respective dairy herds. [ABSTRACT FROM AUTHOR]

To improve the cutting speed and reduce burned layer caused by the accumulation of discharge products during high energy high-speed wire electrical discharge machining (HSWEDM), it is necessary to further study the discharge characteristics. Based on not changing the original high-frequency pulse power supply and servo feed system, an interpulse voltage power supply module is designed to improve the electrolysis effect. Comparative results show that under the same experimental conditions, the interpulse voltage can improve machining stability and cutting speed during high-energy rough cutting. The thickness of the recast layer can be reduced by 37.1%. The recast layer can be greatly reduced by the rough cutting and trimming process. The interpulse voltage has a major influence on the finishing process. The thickness of the recast layer can be further reduced from 16.65 µm to 6.23 µm by optimizing the order of interpulse voltage applied to the process. [ABSTRACT FROM AUTHOR]

Background: Hyperuricemia can lead to synovial hyperplasia in the wrist. In severe cases, it can lead to the deposition of gouty stone in the carpal tunnel, resulting in increased pressure in the carpal tunnel and compression of the median nerve to cause carpal tunnel syndrome (CTS), which is called gouty carpal tunnel syndrome (GCTS). As for the surgical treatment of gouty carpal tunnel syndrome, scholars have different opinions on whether it is necessary to remove the superficial flexor tendon. The purpose of this study was to compare the clinical efficacy of trimming and resection of the diseased superficial flexor tendon in the treatment of gouty carpal tunnel syndrome. Methods: Clinical data were collected from May 2016 to July 2021 from 10 patients (13 affected wrists) diagnosed with gouty carpal tunnel syndrome and classified into two groups according to the surgical modality: the diseased portion of the gout-eroded superficial finger tendon was trimmed in 9 wrists, and the diseased superficial finger flexor tendon was excised in 4 wrists. Values related to flexion and extension functions, 2-PD, DASH, BCTQ, VAS and recurrence in the affected fingers were compared between the two groups as well as before and after surgery in each group. Results: All affected limbs used were cleared of gouty stones, finger numbness improved, no skin necrosis occurred, and all incisions healed at stage I. At follow-up (13.58 ± 5.53 months), there was no significant difference between groups in flexion and extension function, 2-PD, DASH, BCTQ, and VAS with respect to the affected fingers, and patients in both groups improved significantly before and after surgery. Treatment of only one wrist involved trimming to remove lesion-affected portions of tendon, which reappeared 1 year after surgery, and there was one case of poor recovery from greater piriformis muscle atrophy in both procedures. Conclusion: Regarding surgical treatment of patients with gouty carpal tunnel syndrome in which the gouty stone has invaded the superficial flexor tendons of the fingers, the diseased superficial flexor tendons can be selectively excised, and the postoperative mobility of the affected fingers may not be impaired. [ABSTRACT FROM AUTHOR]

The abrasive waterjet machining process was introduced in the 1980s as a new cutting tool; the process has the ability to cut almost any material. Currently, the AWJ process is used in many world-class factories, producing parts for use in daily life. A description of this process and its influencing parameters are first presented in this paper, along with process models for the AWJ tool itself and also for the jet–material interaction. The AWJ material removal process occurs through the high-velocity impact of abrasive particles, whose tips micromachine the material at the microscopic scale, with no thermal or mechanical adverse effects. The macro-characteristics of the cut surface, such as its taper, trailback, and waviness, are discussed, along with methods of improving the geometrical accuracy of the cut parts using these attributes. For example, dynamic angular compensation is used to correct for the taper and undercut in shape cutting. The surface finish is controlled by the cutting speed, hydraulic, and abrasive parameters using software and process models built into the controllers of CNC machines. In addition to shape cutting, edge trimming is presented, with a focus on the carbon fiber composites used in aircraft and automotive structures, where special AWJ tools and manipulators are used. Examples of the precision cutting of microelectronic and solar cell parts are discussed to describe the special techniques that are used, such as machine vision and vacuum-assist, which have been found to be essential to the integrity and accuracy of cut parts. The use of the AWJ machining process was extended to other applications, such as drilling, boring, milling, turning, and surface modification, which are presented in this paper as actual industrial applications. To demonstrate the versatility of the AWJ machining process, the data in this paper were selected to cover a wide range of materials, such as metal, glass, composites, and ceramics, and also a wide range of thicknesses, from 1 mm to 600 mm. The trends of Industry 4.0 and 5.0, AI, and IoT are also presented.

This paper introduces an Acoustic Emission (AE)-based monitoring method designed for supervising the Abrasive Waterjet Cutting (AWJC) process, with a specific focus on the precision cutting of Carbon Fiber-Reinforced Polymer (CFRP). In industries dealing with complex CFRP components, like the aerospace, automotive, or medical sectors, preventing cutting system malfunctions is very important. This proposed monitoring method addresses issues such as reductions or interruptions in the abrasive flow rate, the clogging of the cutting head with abrasive particles, the wear of cutting system components, and drops in the water pressure. Mathematical regression models were developed to predict the root mean square of the AE signal. The signal characteristics are determined, considering key cutting parameters like the water pressure, abrasive mass flow rate, feed rate, and material thickness. Monitoring is conducted at both the cutting head and on the CFRP workpiece. The efficacy of the proposed monitoring method was validated through experimental tests, confirming its utility in maintaining precision and operational integrity in AWJC processes applied to CFRP materials. Integrating the proposed monitoring technique within the framework of digitalization and Industry 4.0/5.0 establishes the basis for advanced technologies such as Sensor Integration, Data Analytics and AI, Digital Twin Technology, Cloud and Edge Computing, MES and ERP Integration, and Human-Machine Interface. This integration enhances operational efficiency, quality control, and predictive maintenance in the AWJC process.

Tillering/branching pattern plays a significant role in determining the structure and diversity of grass, and trimming has been found to induce tillering in turfgrass. Recently, it has been reported that hydrogen peroxide (H2O2) regulates axillary bud development. However, the role of H2O2 in trimming-induced tillering in bermudagrass, a kind of turfgrass, remains unclear. Our study unveils the significant impact of trimming on promoting the sprouting and growth of tiller buds in stolon nodes, along with an increase in the number of tillers in the main stem. This effect is accompanied by spatial-temporal changes in cytokinin and sucrose content, as well as relevant gene expression in axillary buds. In addition, the partial trimming of new-born tillers results in an increase in sucrose and starch reserves in their leaves, which can be attributed to the enhanced photosynthesis capacity. Importantly, trimming promotes a rapid H2O2 burst in the leaves of new-born tillers and axillary stolon buds. Furthermore, exogenous application of H2O2 significantly increases the number of tillers after trimming by affecting the expression of cytokinin-related genes, bolstering photosynthesis potential, energy reserves and antioxidant enzyme activity. Taken together, these results indicate that both endogenous production and exogenous addition of H2O2 enhance the inductive effects of trimming on the tillering process in bermudagrass, thus helping boost energy supply and maintain the redox state in newly formed tillers.

Trimming the scrap portion of ultra-high strength steel (UHSS) components poses a significant challenge due to the inherent high strength and hardness characteristics of the material. For UHSS components with a higher geometric complexity such consisting of inclined and curved sections, sharp tilt, and small bend radius, the large trimming load results in poor sheared quality and shape defects, which commonly happen in these areas. This research investigated the effects of applying a small inclination angle to the punch in the trimming of the UHSS parts having an inclined and curved shape. The inclined punch was modified to four sets of different degrees of inclination i.e., 1°, 3°, 5°, and 10°. A comparative analysis of the trimming load, trimming energy, sheared edge quality and shape defects was conducted between these modified punches and the normal punch for their effectiveness in the trimming operation. Results showed that the application of inclination angle significantly decreased the trimming load, reduced the trimming energy, and improved the sheared edge surface quality, as well as prevented the shape defects at the inclined and curved zones as compared to the outcomes produced when trimming using the normal punch. The study suggested that the change to the punch geometry is an effective option to improve the performance of the process as well as the quality of the part, particularly in trimming the high-strength components having complex shapes. [ABSTRACT FROM AUTHOR]

In a multiple regression model setup, we examine the effects of trimming and winsorization of regressors on the regression estimates and their efficiency. The exact results developed here to enable us to evaluate the effects of winsorizing one regressor on the estimates of the coefficients associated with another regressor. These results have important implications in accounting and finance literature wherein trimming or winsorization is frequently adopted before performing regression analysis. [ABSTRACT FROM AUTHOR]

Nowadays, with regard to many environmental problems, the development of environmentally friendly materials such as natural fiber composites is a real alternative to synthetic fibers. They have many interesting advantages such as their availability, their low cost, their low density, their biodegradable character, their specific resistance properties and their low impact on the environment. The present paper is aimed at fabricating and machining of an epoxy composite material reinforced with Alfa (Stipa tenacissima L.) fibers. The full factorial analysis was used to assess the effect of cutting parameters such as cutting velocity and feed rate on the arithmetic roughness Ra of machined surfaces obtained by down milling and up milling operations. For this purpose, a two flutes high-speed steel (HSS) cutting tool was used. The results showed that the up milling mode provides better surface roughness than down milling mode for almost all machined specimens. The feed rate is the main factor affecting the surface roughness, with a contribution of about 90%. The worst values of arithmetic roughness were observed, at low feed rate (0.05 mm/rev) regardless of the cutting velocity. The results also showed that machining parallel to fibers direction (0°) offers better surface roughness than machining perpendicular to fibers direction (90°). Microscopic and SEM images show some defects such as matrix cracking, cavity, fibers breakage, loss of matrix, fluffing, and thermal damage. [ABSTRACT FROM AUTHOR]

Trimming consists of cutting away parts of a geometric domain, without reconstructing a global parametrization (meshing). It is a widely used operation in computer-aided design, which generates meshes that are unfitted with the described physical object. This paper develops an adaptive mesh refinement strategy on trimmed geometries in the context of hierarchical B-spline-based isogeometric analysis. A residual a posteriori estimator of the energy norm of the numerical approximation error is derived, in the context of the Poisson equation. The estimator is proven to be reliable, independently of the number of hierarchical levels and of the way the trimmed boundaries cut the underlying mesh. Numerical experiments are performed to validate the presented theory, and to show that the estimator's effectivity index is independent of the size of the active part of the trimmed mesh elements. [ABSTRACT FROM AUTHOR]

Simple Summary: Trimming is routinely performed in horses, with direct effects on hoof structures; however, the immediate effect on forelimb joints is unknown. Thus, we investigated the immediate effect of trimming on hoof structures and angulation of the thoracic limb joints through linear and angular measurements. Differences were found in hoof length, toe angle, heel angle, medial heel height, and metacarpophalangeal angle after the procedure, proving the immediate effect of the procedure. Correlations were found between trimming and the proximal joint angles. It is important to understand the effects of hoof trimming on hoof and limb conformation to maximize its benefits on the health of the appendicular skeleton of horses, thus promoting improvements in athletic performance and sporting longevity with regard to athletic horses. There is little information on possible changes in the angulation of the thoracic limb joints after hoof trimming and correlations between the angulation of the thoracic limb joints with hoof measurements. To that purpose, nineteen Mangalarga mares received routine hoof trimming. Visual recordings (photographs) were taken before and after the procedure. Differences (p < 0.05) were found in hoof length, toe angle, heel angle, medial heel height, and metacarpophalangeal angle. Before trimming, correlations were found between frog length and scapulohumeral angle (SH) (r = −0.457; p = 0.049), and between toe length and shoulder-ground angle (SG) (r = −0.553; p = 0.049). A correlation was also seen between the distance from the frog to the lateral wall and the SH angle (r = 0.690; p = 0.001). After trimming, there was a correlation between humeroradial (HR) and SH joint angles (r = 0.669; p = 0.002), and the SG and SH angles (r = 0.488; p = 0.034). This study showed an immediate effect of trimming on the toe angle and heel angle and on the metacarpophalangeal joint angle, in addition to correlations between the hoof and proximal joint angles, following trimming, thus evidencing the relevance of trimming not only in hoof morphology, but also in the conformation of the appendicular skeleton of horses. [ABSTRACT FROM AUTHOR]

For a hypersonic vehicle powered by modular scramjet, integration of the airframe with the engine is critical to generating positive net thrust. In this study, a design method that combines the ideas of streamline tracing and trimming is generalized to design the modular shape-transition nozzle for integrating with the axisymmetric vehicle after-body. As an example, the design of a modular shape-transition nozzle with three modules for an axisymmetric vehicle is presented, and the computational fluid dynamics (CFD) approach is adopted to obtain the detailed flowfield and performance of the modular nozzle. Smooth expansion of the burner-exits gas along the flow direction is involved in the modular nozzle. The flow interactions between any two module exhausts, as well as the flow interaction of the modular jet with the external freestream, are all appearing at the trailing edge of the modular nozzle. Moreover, the modular nozzle produces a net thrust coefficient of 0.8536 and an integrated thrust coefficient of 0.7896 for the vehicle. The mixing of the modular nozzle jet with the freestream is enhanced with the trimming of the separate nozzle module, an approach which can reduce the infrared radiation signal. [ABSTRACT FROM AUTHOR]

The yeast Sup35 protein misfolds into the infectious [PSI+] prion, which is then propagated by the severing activity of the molecular chaperone, Hsp104. Unlike other yeast prions, this prion is unique in that it is efficiently cured by the overexpression as well as the inactivation of Hsp104. However, it is controversial whether curing by overexpression is due to the dissolution of the prion seeds by the trimming activity of Hsp104 or the asymmetric segregation of the prion seeds between mother and daughter cells which requires cell division. To answer this question, we conducted experiments and found no difference in the extent of curing between mother and daughter cells when half of the cells were cured by Hsp104 overexpression in one generation. Furthermore, curing was not affected by the lack of Sir2 expression, which was reported to be required for asymmetric segregation of the [PSI+] seeds. More importantly, when either hydroxyurea or ethanol were used to inhibit cell division, the extent of curing by Hsp104 overexpression was not significantly reduced. Therefore, the curing of [PSI+] by Hsp104 overexpression is not due to asymmetric segregation of the prion seeds, but rather their dissolution by Hsp104. [ABSTRACT FROM AUTHOR]