Search

A practical realization of a diode pumped actively Q-switched Er3+-doped fluoride fiber laser operating near 2.78 μm is reported. For the repetition rate of 100 Hz stable 26 ns pulses with an energy of 330 μJ and peak power of 12.7 kW are demonstrated. The laser performance is tested against variations in pump power, repetition rate and active fiber length.

Lightning diverter strips are commonly used to protect the antenna and sensitive equipment within an airborne radome. This article compares the impact of solid metallic and segmented diverter strips on the radiation properties of the enclosed antenna. Solid metallic and segmented diverter strips of different segment profiles, i.e., square, circular, and diamond, are considered. This article reports how the placement of diverters on the radome and their geometric detail affect the antenna parameters, namely reflection coefficient and far-field pattern. Furthermore, the surface electric field intensity on segmented diverter strips is analyzed for different shapes, sizes, and separations between the metallic segments.

In this letter, the effectiveness of a recently developed stretched coordinate (SC) perfectly matched layer (PML) formulation in the transmission line modeling (TLM) method is investigated for truncating the out-of-plane computational domain of different unit-cell-based frequency selective surface (FSS) simulations. Transmitted power is compared against various absorbing boundary conditions; the accuracy of each method is determined by benchmarking against results from method of moments (MoM) simulations. Good agreement with the MoM analysis is shown by the SC TLM-PML and, unlike the weakly stable split-field-based TLM-PML schemes, no instabilities are observed in the late time.

A novel implementation of the stretched coordinate perfectly matched layer (PML) is presented for the two-dimensional (2D) transmission line modelling (TLM) method. The formulation offers a unified approach and is based on the mapping of the TLM node to a complex stretched domain for which the resulting transformation of the constituent RLC transmission line components is elaborated. The transformation is shown to modify the TLM connect-scatter algorithm. The absorption performance is demonstrated by simulating a canonical waveguide test case. Unlike the existing split-field based TLM-PML implementations, which are better suited to lossless media, the numerical results obtained show the proposed PML formulation is effective in the termination of both lossy and lossless media.

Based on tapered Triple-Core Photonic Crystal Fiber (TCPCF), a high performance tunable Dual-Wavelength Erbium-Doped Fiber Laser (DW-EDFL) is proposed and experimentally demonstrated. The mode-coupling among three cores of TCPCF appears periodically and becomes further enhanced in tapered TCPCF, which are beneficial to form a filter to select lasing wavelength. A series of tapered TCPCFs with different taper lengths are fabricated and inserted into tunable DW-EDFL as filters. Multiple groups of tunable dual-wavelength lasing outputs are achieved by using the tapered TCPCF filter with a waist diameter of 126 μm. The maximum tunable range can reach up to 14.36 nm and the side mode suppression ratio of all lasing outputs are above 52 dB. In addition, the tunable single- and triple-wavelength lasers are also obtained. The tunable single-wavelength laser has an excellent linear response to strain and can be applied to realize a high-sensitivity strain sensor with the highest strain sensitivity of -13.1 pm/με.

In this paper, a global multi-trace method for the scattering of time-harmonic waves by a structure that can contain, in addition to dielectric and perfectly conducting regions also perfectly conducting thin sheets, is presented. The method is direct in the sense that the unknowns are traces and jumps of the fields in the structure. The flexibility of the method and the correctness of the solution will be demonstrated by realistic examples.

This Letter, to the best of our knowledge, reports mid-infrared fiber lasing beyond 5 µm at room temperature for the first time, C e 3 + -doped, chalcogenide glass, step index fiber employed in-band pumping with a 4.15 µm quantum cascade laser. The lasing fiber is was 64 mm long, with a calculated numerical aperture of 0.48 at the lasing wavelengths. The core glass was G e 15 A s 21 G a 1 S e 63 atomic % (at. %), doped with 500 parts-per-million-by-weight Ce, with a 9 µm core diameter. The cladding glass was G e 21 S b 10 S e 69 at. % with a 190 µm outer diameter. As pump power increases continuous wave lasing corresponding to the 2 F 7 / 2 → 2 F 5 / 2 , transition in the C e 3 + ion occurs at 5.14 µm, 5.17 µm, and 5.28 µm.

A numerical model was developed to study the time dynamics of photoluminescence emitted by Tb3+ doped multimode chalcogenide-selenide glass fibers pumped by laser light at approximately 2 μm. The model consists of a set of partial differential equations (PDEs), which describe the temporal and spatial evolution of the photon density and level populations within the fiber. In order to solve numerically the PDEs a method of lines was applied. The modeling parameters were extracted from measurements and from data available in the literature. The numerical results obtained support experimental observations. In particular, the developed model reproduces the discrepancies that are observed between the photoluminescence decay curves obtained from different points along the fiber. The numerical analysis was also used to explain the source of these discrepancies.

This contribution reports on detailed experimental and numerical investigations of both near-infrared (NIR) and mid-infrared (MIR) photoluminescence obtained in praseodymium trivalent ion doped chalcogenide-selenide glass fiber. The experimental analysis allows for the identification of the radiative transitions within the praseodymium ion energy level structure to account for the photoluminescent behavior. Numerical analysis is carried out using the rate equations’ approach to calculate the level populations. The numerical analysis provides further insight into the nature of the radiative transitions in the Pr3+ ion doped chalcogenide-selenide glass and allows for the identification of the electronic transitions, which contribute to the observed photoluminescence. The numerical results agree well with the experimental results.

We study numerically a two-dimensional (2-D) elliptical microcavity laser, in the center of which a circular active region is located, modeling a focused pumped spot or an injection electrode. The object of the research is to study lasing spectra, gain-medium thresholds, and modal fields, found as solutions to a classical electromagnetic eigenvalue problem tailored to address the threshold conditions. The instrument of our study is the set of two coupled Muller boundary integral equations (BIE) on the boundaries of the cavity and the active region. These BIEs are discretized by the Nystrom technique that guarantees the convergence. Among the modes that co-exist in such a resonator, we demonstrate the whispering-gallery-like modes (WGM) and the bow-tie-like modes (BTM). We find that the threshold values of material gain of BTMs can become lower than those of nearby WGMs if the radius of the active region in the cavity center is getting sufficiently small.

This paper uses the unstructured transmission line modeling method to investigate near-field interactions between a broadband microwave antenna and a platform that arise as a result of antenna installation. The antenna, feed line, and the platform are represented by a common meshed model and simulated using a single time-domain numerical method. This paper aims to establish guidelines on how to achieve high accuracy when modeling both the near and far fields of an antenna while at the same time prioritizing computational resources. By isolating critical features such as the feed line and selected fine details of the antenna geometry, this paper assesses how accurately these fine features need to be described in the model and how they affect the return loss and far-field pattern of the antenna. The size of the platform is varied from small to medium size (up to 10 wavelengths) and its impact on the antenna performance is assessed. Finally, the conclusions of the study are applied to an example of an antenna installed in the leading edge of an aircraft wing, with and without, a protective radome cover.