Search

This paper introduces a sophisticated approach for identifying and categorizing broken rotor bars in direct torque-controlled (DTC) induction motors. DTC is implemented in industrial drive systems as a suitable control method to preserve torque control performance, which sometimes shows its impact on fault-representing frequencies. This is because of the DTC’s closed-loop control nature, whichtriesto reduce speed and torque ripples by changing the voltage profile. The proposed model utilizes the modified Shapley Additive exPlanations (SHAP) technique in combination with gradient-boosting decision trees (GBDT) to detect and classify the abnormalities in BRBs at diverse (0%, 25%, 50%, 75%, and 100%) loading conditions. To prevent overfitting of the proposed model, we used the adaptive fold cross-validation (AF-CV) technique, which can dynamically adjust the number of folds during the optimization process. By employing extensive feature engineering in the original dataset and then applying Shapely Additive exPlanations(SHAP)-based feature selection, our methodology effectively identifies informative features from signals (three-phase current, three-phase voltage, torque, and speed) and motor characteristics. The gradient-boosting decision tree (GBDT) classifier, trained using the given characteristics, extracts consistent and reliable classification performance under different loading circumstances and enables precise and accurate detection and classification of broken rotor bars. The proposed approach (SHAP-Fusion GBDT with AF-CV) is a major advancement in the field of machine learning in detecting motor anomalies at varying loading conditions and proved to be an effective mechanism for preventative maintenance and preventing faults in DTC-controlled induction motors byattaining an accuracy rate of 99% for all loading conditions.

The detection of faults during an operational process constitutes a crucial objective within the framework of developing a control system to monitor the structure of industrial mechanisms. Even minor faults can give rise to significant consequences that require swift resolution. This research investigates the impact of overtension in the tooth belt transmission and heating of the screw transmission worm on the vibration signals in a robotic system. Utilizing FFT techniques, distinct frequency characteristics associated with different faults were identified. Overtension in the tooth belt transmission caused localized oscillations, addressed by adjusting the acceleration and deceleration speeds. Heating of the screw transmission worm led to widespread disturbances affecting servo stress and positioning accuracy. A fuzzy logic algorithm based on spectral analysis was proposed for adaptive control, considering the vibration’s frequency and amplitude. The simulation results demonstrated effective damage mitigation, reducing wear on the mechanical parts. The diagnostic approach, relying on limited data, emphasized the feasibility of identifying transmission damage, thereby minimizing maintenance costs. This research contributes a comprehensive and adaptive solution for robotic system diagnostics and control, with the proposed fuzzy logic algorithm showing promise for efficient signal processing and machine learning applications.

Abstract The demand for energy is a relevant topic in the field of science and engineering, which has been discussed throughout the last years due to the challenges of climate change and environmental concerns around the world. Currently, electric vehicles (EVs) offer a source of mobility that emphasises the use of energy storage devices to reduce CO2 emissions. The growing development of advanced data analytics and the Internet of Things has driven the implementation of the Digital Twin (DT), all to improve efficiency in the build, design and operation of the system. Regarding the components of EVs, the batteries are considered as the most expensive elements to analyse according to the State of Health and the State of Charge, which lead to implement the most optimal models, along with a DT for battery systems. The present article provides a literature review about the current development trends of EVs' energy storage technologies, with their corresponding battery systems, which gives an overview to understand different type of models and to identify future challenges in the industrial sector. Additionally, a solid explanation of the DT focussed on battery systems for EVs is discussed, highlighting some study cases, characteristics, and technological opportunities.

Servomotors have found widespread application in many areas, such as manufacturing, robotics, automation, and others. Thus, the control of servomotors is divided into various principles and methods, leading to a high diversity of control systems. This article provides an overview of types of servomotors and their basic principles and control methods. Principles such as digital signal processing, feedback control principle, field-oriented control, and integration with Industry 4.0 are discussed. Based on these control principles, the article presents popular control methods: PWM control, current control, two-loop control, fuzzy-logic control, and programmable control. The article concludes with a comparison of the presented methods on several criteria, and as an example, it includes the results of modeling a servomotor using the fuzzy-logic control method.

The paper discusses problems that occur in robotic arm control. The specific problems arise due to the wear of various types of gears (in the presented case, belt gear and worm gear). It is important to note that such errors need to be diagnosed in time, and the way of their elimination has to be determined, which should be resource-intensive and cost-effective. This article describes the basic types of robotic manipulators (robotic arm, telpher and Cartesian), presenting a review and study of the possibilities of errors in the movement of a robot, adjustment of a mechanical system, and determination of a strategy for solving the emerging problems. A comparison between various types of gear faults is also provided. Different ways of diagnosing faults are discussed, based on the advantages and disadvantages of the methods. The main objective of this study is to provide a complete overview of the mechanical areas where disturbances occur, their diagnosing, and methods of their elimination.

The reliable operation of power transmission networks depends on the timely detection and localization of faults. Fault classification and localization in electricity transmission networks can be challenging because of the complicated and dynamic nature of the system. In recent years, a variety of machine learning (ML) and deep learning algorithms (DL) have found applications in the enhancement of fault identification and classification within power transmission networks. Yet, the efficacy of these ML architectures is profoundly dependent upon the abundance and quality of the training data. This intellectual explanation introduces an innovative strategy for the classification and pinpointing of faults within power transmission networks. This is achieved through the utilization of variational autoencoders (VAEs) to generate synthetic data, which in turn is harnessed in conjunction with ML algorithms. This approach encompasses the augmentation of the available dataset by infusing it with synthetically generated instances, contributing to a more robust and proficient fault recognition and categorization system. Specifically, we train the VAE on a set of real-world power transmission data and generate synthetic fault data that capture the statistical properties of real-world data. To overcome the difficulty of fault diagnosis methodology in three-phase high voltage transmission networks, a categorical boosting (Cat-Boost) algorithm is proposed in this work. The other standard machine learning algorithms recommended for this study, including Support Vector Machine (SVM), Decision Trees (DT), Random Forest (RF), and K-Nearest Neighbors (KNN), utilizing the customized version of forward feature selection (FFS), were trained using synthetic data generated by a VAE. The results indicate exceptional performance, surpassing current state-of-the-art techniques, in the tasks of fault classification and localization. Notably, our approach achieves a remarkable 99% accuracy in fault classification and an extremely low mean absolute error (MAE) of 0.2 in fault localization. These outcomes represent a notable advancement compared to the most effective existing baseline methods.

This article explores the transformative potential of digital twin (DT) technology in the automotive sector, focusing on its applications in enhancing propulsion drive systems. DT technology, a virtual representation of physical objects, has gained momentum due to its real-time monitoring and analysis capabilities. Within the automotive industry, where propulsion systems dictate vehicle performance, DTs offer a game-changing approach. Propulsion drive systems encompass electric motors, transmissions, and related components, significantly impacting efficiency and power delivery. Traditional design and testing methods need help addressing these systems’ intricate interactions. This article aims to investigate how DTs can revolutionize propulsion systems. The study examines various applications of DTs, ranging from predictive maintenance to performance optimization and energy efficiency enhancement. The article underscores the technology’s potential by reviewing case studies and real-world implementations. It also outlines challenges tied to integration and validation. In unveiling the capabilities of DT technology for propulsion systems, this article contributes to a comprehensive understanding of its role in shaping a more data-driven and efficient automotive industry.

Abstract This paper presents an analytical modelling technique based on modified winding function and co‐energy analysis, for characterisation of synchronous reluctance machines, in conjunction with a hybrid algorithm for mapping of the machine's operating point on BH curve and the corresponding performance parameters in non‐linear magnetic condition. The model successfully provides the mean torque and the torque profiles of a synchronous reluctance motor as a function of input current and load‐angle in the magnetic linear and non‐linear conditions. The obtained results of this proposed model are compared with finite‐element‐analysis (FEA) based commercial design software Simcentre‐MAGNET. The comparison proves this model's capability to estimate the machine's performance parameters with considerable accuracy from an already established design analysis technique, FEA. The proposed modelling technique requires only a fraction of simulation runtime when compared to other design analysis techniques. Considering the accuracy of this modelling technique and the least requirement of computation resources and simulation time, this model can be used as an initial iterative‐design tool for mass personalised, additively manufactured electrical machines where rapidness of the iterative design analysis tool is of paramount importance.

The concept of Digital Twin is creating and maintaining a digital representation of the real physical entity and supporting its performance utilizing simulation and optimization tools, which are fed with the real data obtained from the physical equipment. Development and implementation of the Digital Twin technology are one of the main challenges for today’s industry, more detailed studies are needed on design methods for Digital Twins. Besides using Digital Twin as a high-quality simulation, one of the commitments is monitoring and maintaining control of the whole system via a constant live link between virtual and physical entities. The related research study presents a detailed structural description of the developed Digital Twin virtual entity and the development of a framework that allows Robot Operating System (ROS) to securely communicate with remote Digital Twins via the Internet and harness ROS’s adaptability across vast distances and multiple systems. This paper is an extended version of the authors’ International Conference on Electrical Power Drive Systems (ICEPDS20) paper, in which we propose a development case study of Digital Twin for an electric motor based on an empirical performance model.

This article presents an intelligent and accurate framework for fault diagnosis of induction motors using light gradient boosting machine (LightGBM). The proposed framework offers promising generalization ability when the testing data contains new unseen operating conditions unavailable during the training process. After the acquisition of vibration signals and feature extraction in multiple domains, we perform an iterative feature selection (FS) approach by utilizing a modified version of recursive feature elimination (RFE) and the features’ importance scores obtained by LightGBM. To prevent overfitting and subsequent selection bias, an outer resampling loop encompasses the whole process of our RFE-LightGBM algorithm. Moreover, instead of the conventional resampling methods based on K-fold cross-validation (CV) or leave-one-out CV (LOOCV), we use a new scheme called leave-one-loading-out CV (LOLO-CV). Leveraging LOLO-CV, the proposed FS method identifies the optimal feature subset, making the fault diagnosis robust under changing operating conditions. Then, the final classification is performed with optimal feature subset by training a new LightGBM model with adjusted hyperparameters employing Bayesian optimization. Experimental results from two real case studies show that our proposed fault diagnosis framework achieves accuracies between 98.55% and 100% for various testing scenarios. For example, for the worst-case testing scenario in the bearing dataset of Case Western Reserve University where the no-load data (0hp) is absent during the training process and is only used for testing, the testing accuracy of LightGBM classifier before and after applying the proposed RFE-LightGBM-FS method is 88.04% to 97.23%, respectively. Using the Bayesian hyperparameter optimization further improves the accuracy to 98.55%.

Over the past decade, additive manufacturing (AM) of functional electromagnetic components has grown into a promising new area of research. Not only does AM allow for unparalleled in-house prototyping speed and flexibility, but it also introduces a completely new set of design rules for obtaining optimized component shapes. Up to date, relatively few functional electromagnetic components or devices have actually been printed, and fewer still actually characterized or compared in terms of performance. This work describes the completion process of a prototype induction motor with fully 3D printed electrical steel cores, from design to printing, post-processing, assembling, and performance evaluation. This work aims to establish a baseline for further optimization and to map the design and production process of a fully functional electrical machine for future reference. The output of the finished motor was measured at 68 W (0.5 Nm) at 34% energy efficiency. This is roughly 2/3 of the efficiency of conventional machines of the same size and type. Further optimization steps for the 3D printed material and core design are proposed to obtain higher motor performance.

Electrical machines are prone to various faults and require constant monitoring to ensure safe and dependable functioning. A potential fault in electrical machinery results in unscheduled downtime, necessitating the prompt assessment of any abnormal circumstances in rotating electrical machines. This paper provides an in-depth analysis as well as the most recent trends in the application of condition monitoring and fault detection techniques in the disciplines of electrical machinery. It first investigates the evolution of traditional monitoring techniques, followed by signal-based techniques such as spectrum, vibration, and temperature analysis, and the most recent trends in its signal processing techniques for assessing faults. Then, it investigates and details the implementation and evolution of modern approaches that employ intelligence-based techniques such as neural networks and support vector machines. All these applicable and state-of-art techniques in condition monitoring and fault diagnosis aid in predictive maintenance and identification and have the highly reliable operation of a motor drive system. Furthermore, this paper focuses on the possible transformational impact of electrical machine condition monitoring by thoroughly analyzing each of the monitoring techniques, their corresponding pros and cons, their approaches, and their applicability. It offers strong and useful insights into proactive maintenance measures, improved operating efficiency, and specific recommendations for future applications in the field of diagnostics.

Digital twins (DTs) have been implemented in various applications, including wind turbine generators (WTGs). They are used to create virtual replicas of physical turbines, which can be used to monitor and optimize their performance. By simulating the behavior of physical turbines in real time, DTs enable operators to predict potential failures and optimize maintenance schedules, resulting in increased reliability, safety, and efficiency. WTGs rely on accurate wind speed measurements for safe and efficient operation. However, physical wind speed sensors are prone to inaccuracies and failures due to environmental factors or inherent issues, resulting in partial or missing measurements that can affect the turbine’s performance. This paper proposes a DT-based sensing methodology to overcome these limitations by augmenting the physical sensor platform with virtual sensor arrays. A test bench of a direct drive WTG based on a permanent magnet synchronous generator (PMSG) was prepared, and its mathematical model was derived. MATLAB/Simulink was used to develop the WTG virtual model based on its mathematical model. A data acquisition system (DAS) equipped with an ActiveX server was used to facilitate real-time data exchange between the virtual and physical models. The virtual sensor was then validated and tuned using real sensory data from the physical turbine model. The results from the developed DT model showed the power of the DT as a virtual sensor in estimating wind speed according to the generated power.

Due to their efficiency and control capabilities, induction motors fed with inverters have become prevalent in various industrial applications. However, ensuring the reliable operation of the motor and diagnosing faults on time are crucial for preventing unexpected failures and minimizing downtime. This paper systematically analyzes condition monitoring and practical diagnostic techniques for inverter-fed motor drive systems. This study encompasses a thorough evaluation of different methods used for condition monitoring and diagnostics of induction motors, with the most crucial faults in their stator, rotor, bearings, eccentricity, shaft currents, and partial discharges. It also includes an assessment of their applicability. The presented analysis includes a focus on the challenges associated with inverter-fed systems, such as high-frequency harmonics, common-mode voltages causing the bearing currents, and high voltage gradients (dv/dt) due to fast switching frequency, which can impact the motor operation, as well as its faults analysis. Furthermore, this research explores the usefulness and efficiency of various available diagnostic methods, such as motor current signature analysis and other useful analyses using advanced signal processing techniques. This study aims to present findings that provide valuable insights for developing comprehensive condition monitoring strategies, and practical diagnostic techniques that enable proactive maintenance, enhanced system performance, and improved operational reliability of inverter-fed motor drive systems.

The increasing demand for intelligent machines, coupled with the drive for the more efficient utilization of these machines in various industries, and the emergence of Industry 4 [...]

This paper presents a case study on the development of the Attitude Determination and Control System (ADCS) of Tallinn University of Technology (TalTech) student CubeSat satellites (TTU100 satellite project). To determine the satelliteâs attitude in orbit and its rotational speed, the satellites are equipped with sun sensors, magnetometers, and gyroscopes. The satellites use magnetorquers and flywheels in 3-axis as actuators to control rotational speed and attitude. The ADCS is used to convert sensor signals into control reference for the actuators. The research focuses on analysing sensors and actuators used in other CubeSat-type satellites as well as on the process of TTU100 hardware and software development. Special attention is paid to selecting software methods for determining the attitude and evaluating the performance of the developed ADCS. The necessity of further study and dissemination of the mission results is suggested.

This research work implements an initial methodology for the assessment of Battery Energy Storage Systems (BESSs) based on Remaining Useful Lifetime (RUL), and its main contribution is the modeling and estimation of Health and Charge indicators through regression algorithms and binary classifiers during the battery’s operation. Linear Regression, Ridge Regression, and Lasso Regression are the main algorithms for modeling the State of Health (SOH), while Decision Tree, Naïve Bayes, and Logistic Regression are implemented as binary classifiers to estimate the charge and discharge during battery operation. Additional data science techniques are executed to provide feature selection, validation, and metrics of performance. The results show that binary classifiers achieve a remarkable accuracy, around 95% for charge and discharge predictions, which is supported by experimental battery measurements. Similarly, regression algorithms achieve accuracy results around 97% and provide a basis for determining the Remaining Useful Lifetime (RUL) according to the End-of-Life (EOL) criteria of a BESS.

The aim of the presented investigation is to explore the time gap between an anomaly appearance in continuously measured parameters of the device and a failure, related to the end of the remaining resource of the device-critical component. In this investigation, we propose a recurrent neural network to model the time series of the parameters of the healthy device to detect anomalies by comparing the predicted values with the ones actually measured. An experimental investigation was performed on SCADA estimates received from different wind turbines with failures. A recurrent neural network was used to predict the temperature of the gearbox. The comparison of the predicted temperature values and the actual measured ones showed that anomalies in the gearbox temperature could be detected up to 37 days before the failure of the device-critical component. The performed investigation compared different models that can be used for temperature time-series modeling and the influence of selected input features on the performance of temperature anomaly detection.

Additive manufacturing (AM) or 3D printing has opened up new opportunities for researchers in the field of electrical machines, as it allows for more flexibility in design and faster prototyping, which can lead to more efficient and cost-effective production. An overview of the primary AM techniques utilized for designing electrical machines is presented in this paper. AM enables the creation of complex and intricate designs that are difficult or impossible to achieve using traditional methods. Topology Optimization (TO) can be used to optimize the design of parts for various purposes such as weight, thermal, material usage and structural performance. This paper primarily concentrates on the most recent studies of the AM and TO of the reluctance machines. The integration of AM with TO can enhance the design and fabrication process of magnetic components in electrical machines by overcoming current manufacturing limitations and enabling the exploration of new design possibilities. The technology of AM and TO both have limitations and challenges which are discussed in this paper. Overall, the paper offers a valuable resource for researchers and practitioners working in the field of AM and TO of electrical machines.

The additive manufacturing approach is considered a new manufacturing technology method and is evolving dynamically in recent years. It is advancing and achieving as the key enabling technology in a wide range of applications, from medical sciences to the aerospace and automotive industries. This novel approach opens a new path to overcome the conventional manufacturing problems and challenges by providing more design freedom, new ranges of materials, lightweight and complex geometries. According to demands metrics such as lightweight and high power density motors. This offers clear motivation to develop the advanced thermal management method with new materials and a novel additive manufacturing (AM) approach. The paper aims to provide a comprehensive review of all the attempts in various electrical machines' thermal management methods using AM method. It considers the opportunities and challenges that designers are facing while implementing these approaches. Finally, the authors make some comments/forecasts on how the AM could improve the performance and manufacturability of the future thermal management system of electrical machines.

Reference implementation of Digital Twins for electrical energy conversion systems is an important and open question in the industrial domain. Digital Twins can predict the future performance, behaviour, and maintenance needs of a complex system. Today the concept of Digital Twins is not only an emulation or simulation of the physical object along with its development history but also contains much information from the respective manufacturers and services. This paper presents the current state-of-the-art of Digital Twins in relation to some interesting novel applications from different fields of electrical engineering. The objective of the paper is to give an overview of the successful application of Digital Twins in electrical energy conversion systems, such as industrial robotics and wind turbines; to discuss trends in applications like electric vehicles; and to suggest new applications, such as telescopes. Special attention is paid to the possible application of Digital Twins in faults diagnostics and prognostics of electrical energy conversion systems. Successful implementation of Digital Twins in any electrical energy conversion system diagnostics and prognostics allows for low-cost maintenance, higher utilization of the individual devices and systems, as well as lower usage of material and human resources. A SWOT analysis was performed for Digital Twin applications in electrical energy conversion systems. The latter is a useful analysis technique that explores possibilities for new achievements or solutions to existing problems and makes decisions about the best path.

A discrete winding function analysis (DWFA) based approach for the modelling of skewed rotor cage-type induction motor with minimal simulation time is presented in this paper. The rotor slot skew has a significant attenuating impact on principal slotting harmonics (PSH) or rotor slotting harmonics (RSH). These harmonics can play a significant role in sensor-less speed estimation and condition monitoring of induction machines. The advanced fault diagnostic algorithms are becoming increasingly dependent on the fast and accurate mathematical models of electrical machines. The most accurate models are based on the finite element method (FEM), but the computational complexity and the required simulation time make them unsuitable for model-dependent fault diagnostic algorithms. Moreover, as most models are 2D, they cannot incorporate axial asymmetries such as rotor slot skews. Furthermore, most analytical models, such as modified winding function analysis (MWFA), depend upon the continuous integration functions, increasing complexity while implementing them in the online environment in digital signal processing boards. To resolve all those issues, DWFA based model is proposed in this paper, which can simulate the majority of the faults in negligible time compared to the corresponding FEM models. The impact of slot skews and unbalanced power supply on the current spatial harmonics is studied, and the results are compared with the practical measurements taken from the laboratory setup.

For several decades, the design and manufacture of electrical machines has been considered a technically mature area and, as a result, research and development in the area has been extremely limited, even though this is a crucial technology in the application of electrical energy. Electrical machines are used in over 80% of the world’s energy conversion processes—first to create electrical energy, which can be easily transmitted, and second to convert that energy into mechanical form for applications ranging from dishwashers to transportation, and from medical devices to those used for industrial processes. Today, two technologies are changing this. The first is the development of power electronic drives and the second is the introduction of additive manufacturing technology. The latter technology has opened up new areas for innovation and research, and many conventional processes are likely to become obsolete. Considering the overall consumption of electricity by electrical machines, the design freedom granted by the novel production technology gives the opportunity for even more efficient, object-oriented machines to be built, with a lower environmental impact and less raw material consumption. If this technology can be developed to maturity, it would have a significant positive impact on the desired green transition that is being pursued all over the world.

Nowadays a lot of attention is paid on the issues of global warming and climate change. Human impact on the environment is noticeable from the aspect of resource life cycles. Energy efficiency requirements have led to the research and development of alternative technologies for the rotating electrical machines. The life cycle assessment brings out important procedures which can help to reduce machines’ impact on the environment, being therefore an instrument for the assessment of the influence of particular products on the environment from cradle to grave – beginning with working out the materials, followed by manufacturing, transporting, marketing, use, and recycling. Three types of electrical machines have been chosen for comparison: synchronous reluctance motor, permanent magnet assisted synchronous reluctance motor and induction motor. The article presents a life cycle assessment case study based on experimental results of motors designed by the research group.

This paper presents a practical thermal model of a synchronous generator for high-power applications. This model couples the lumped parameter thermal network and coolant network together to utilize the impact of the coolant’s temperature rising over the machine. Furthermore, the advanced multi-planes technique provides a more precise and higher resolution temperature distribution of various machine sections. Therefore, the machines are divided into five planes; three belong to the active part, and two are added to model the machine’s drive and non-drive end-regions. Furthermore, the paper pays special attention to describing the challenges and providing solutions to them during the heat transfer modeling and analysis. Finally, the analytical model is verified using experimental results on a synchronous generator with a salient pole rotor and an open self-ventilation (OSV) cooling system by comparing the analytical and experimental results. As a result, good correspondence between the estimated and measurement results is achieved.

Industrial revolution 4.0 has enabled the advent of new technological advancements, including the introduction of information technology with physical devices. The implementation of information technology in industrial applications has helped streamline industrial processes and make them more cost-efficient. This combination of information technology and physical devices gave birth to smart devices, which opened up a new research area known as the Internet of Things (IoT). This has enabled researchers to help reduce downtime and maintenance costs by applying condition monitoring on electrical machines utilizing machine learning algorithms. Although the industry is trying to move from scheduled maintenance towards predictive maintenance, there is a significant lack of algorithms related to fault prediction of electrical machines. There is quite a lot of research going on in this area, but it is still underdeveloped and needs a lot more work. This paper presents a signal spectrum-based machine learning approach toward the fault prediction of electrical machines. The proposed method is a new approach to the predictive maintenance of electrical machines. This paper presents the details regarding the algorithm and then validates the accuracy against data collected from working electrical machines for both cases. A comparison is also presented at the end of multiple machine learning algorithms used for training based on this approach.

Electrical machines are prone to faults and failures and demand incessant monitoring for their confined and reliable operations. A failure in electrical machines may cause unexpected interruptions and require a timely inspection of abnormal conditions in rotating electric machines. This article aims to summarize an up-to-date overview of all types of bearing faults diagnostic techniques by subdividing them into different categories. Different fault detection and diagnosis (FDD) techniques are discussed briefly for prognosis of numerous bearing faults that frequently occur in rotating machines. Conventional approaches, statistical approaches, and artificial intelligence-based architectures such as machine learning and deep learning are discussed summarily for the diagnosis of bearing faults that frequently arise in revolving electrical machines. The most advanced trends for diagnoses of frequent bearing faults based on intelligence and novel applications are reviewed. Future research directions that are helpful to enhance the performance of conventional, statistical, and artificial intelligence (machine learning, deep learning) and novel approaches are well addressed and provide hints for future work.

The hairpin winding configuration has been attracting attention as a solution to increase the power density of electric vehicle motors by enhancing the slot-filling factor. However, this winding configuration brings high AC losses during high-speed operation and we require new approaches to tackle this challenge. This paper considers reducing AC losses by proposing two main methods: correct transposition of conductors in parallel paths, and enhancing the number of conductor layers in a slot. First, the proper connection of conductors in parallel paths is considered, and the essential rules for this purpose are described. Next, the paper uses a numerical approach to deal with the effect of incorrect conductor transposition in winding paths on generating additional AC losses due to circulating currents. Finally, the impact of the number of conductor layers in the mitigation of AC losses is also discussed in detail. According to the results, by increasing the number of layers, ohmic losses in the layer near the slot opening dramatically decrease. For instance, ohmic losses in the layer near the slot opening of the eight-layer setup were 82% less than the two-layer layout.

In order to define the best design structure of the synchronous reluctance motor (SynRM) rotor, optimization must be carried out, implying the selection of the best alternative for each specific criterion. The optimization of an electrical machine is a complicated work involving meeting different criteria requirements while dealing with a range of constraints. In order to implement the optimization, it is necessary to process a huge number of options, changing the combinations of the factors affecting criteria and restrictions, which is a time-consuming process. This research presents the optimization technique that gives a mathematically proven solution of the optimal rotor design of a synchronous reluctance machine obtained by using metamodels in the form of local polynomial approximations. Analysis of the results of numerical modeling and experimental investigation has been performed in order to validate the developed technique and recommendations. SynRM rotor was manufactured, with the stator to be taken from the 1.1 kW W21 WEG induction motor, which makes possible the relevant experimental study. The performance analysis of the developed SynRM is shown in the paper.

Grid-powered pumping plants are widespread electromechanical systems commonly set in motion by electrical machines. The productivity of these electromechanical systems varies substantially according to the shift of the location of the working point on the H-Q plane, which is determined with the help of mutual positions of the characteristics of the pump unit itself and the hydraulic parameters of the pipeline. The topic of the proposed article is mainly focused on the investigation of pumping plant productivity equipped with two various types of electrical machines known as induction and synchronous reluctance motors. A simulation method of efficiency prediction of a centrifugal pumping plant for flow regulation is proposed. The described Simulink/Matlab simulation approach is quite valuable for validating efficiency in the case of pumping plants supplied with various types of electrical machines. The data relating to the electrical machines’ efficiency estimation were obtained during a series of experimental tests with the real experimental setup. Thus, the calculation results of the model are accurate and based on confirmed experimental measurements.

Additive manufacturing (AM) is considered the enabling technology for topology optimized components, with its unparalleled, almost free-form design freedom. Over the past decade, AM of electromagnetic materials has evolved into a promising new area of research. Considerable efforts have also been invested by the electrical machine (EM) research community to develop and integrate novel additive components. Several challenges remain, however, in printing soft magnetic flux guides—most prominently, reducing the induced eddy currents to achieve competitive AM core efficiency. This paper demonstrates the workflow of laser additive manufacturing magnetic cores with superior magnetic properties to soft magnetic composites (at 50 Hz excitation): describing the workflow, parameter tuning for both printing and annealing, and shape optimization. Process optimization yielded the optimal energy density of 77 J/mm3 and annealing temperature of 1200 °C, applied to prepare the samples with the highest relative density (99.86%), lowest surface roughness Rz (0.041 mm), minimal hysteresis losses (0.8 W/kg at 1.0 T, 50 Hz), and ultimate yield strength of 420 MPa. For Eddy current suppression, the sample (5 × 5 × 60 mm toroid) with bi-directional grading reached specific core losses as low as 1.8 W/kg (W10,50). Based on the findings, the advantages and disadvantages of AM graded cores are discussed in detail.

Additive manufacturing (AM) is a key technology for advancing many fields, including electrical machines. It offers unparalleled design freedom together with low material waste and fast prototyping, which is why it has become to focus of many researchers. For electrical machines, AM allows the production of designs with optimized mechanical, electromagnetic and thermal parameters. This paper attempts to give the reader an overview of the existing research and thermal solutions which have been realized with the use of AM. These include novel heat sink and heat exchanger designs, solutions for cooling the machine windings directly, and additively manufactured hollow windings. Some solutions such as heat pipes, which have been produced with AM but not used to cool electrical machines, are also discussed, as these are used in conventional designs and will certainly be used for additively manufactured electrical machines in the future.

Renewables have passed the peak of the inflated expectation hype cycle for emerging technologies, but interest in the design of new energy conversion devices is still high due to widespread distributed energy systems for private households. Magnus effect-based wind turbine combines mechanical and electronic engineering that provides a broader wind speed range and potential maximum power point tracking for deeper grid integration. This paper provides a comparative analysis of Magnus effect-based wind turbine simulation models and the development of the numerical model for the maximum power point tracking algorithm. The advanced model contributes to the reduction of the number of actual tests required for the mechatronics system tuning and deals with sustainability-related challenges, such as climate change and the development of new renewable sources of energy.

Electrical machines are to face different challenging factors during operation, such as high unexpected or excessive loads, unusual properties of the working environment, or intense fluctuations in rotation speed. Therefore, maintenance questions and predicting the accuracy of an equipment’s condition have great importance. This study is based on the theory of vibration reliability. This article introduces the most common faults of bearings in electrical machines and discusses their diagnostic possibilities. Experimental setup, as well as studied bearing failures, are described. The accuracy of conducted experiments is introduced.

This paper presents a hybrid thermal modeling methodology to analyze the temperature performance of radial flux electrical machines. For this purpose, the 2D finite element model of the active part of the machine is coupled with a lumped parameters thermal circuit of the end-winding region. A synchronous reluctance machine is used to validate the proposed approach. The results from the proposed method are compared with the experimental ones, which are obtained from a prototype machine. The computations show that the 2D FE model underestimates the temperature rise in the machine as it does not account for the power losses in the end-windings. The hybrid model accounts for these losses as well as for the heat dissipation in the end-winding region.

The paper is about the design and prototyping of directly driven outer rotor permanent magnet generator for small scale wind turbine. In the paper, the initial design of the generator is given. Main issues and phenomena affecting the generator design, such as cogging torque and its reduction possibilities, selection and demagnetization risk assessment of permanent magnets, machine losses and thermal analysis, are described. Test results of prototype generator construction and final parameters are also presented. The necessity of further study is pointed out.

Nowadays, electrical machines and drive systems are playing an essential role in different applications. Eventually, various failures occur in long-term continuous operation. Due to the increased influence of such devices on industry, industrial branches, as well as ordinary human life, condition monitoring and timely fault diagnostics have gained a reasonable importance. In this review article, there are studied different diagnostic techniques that can be used for algorithms’ training and realization of predictive maintenance. Benefits and drawbacks of intelligent diagnostic techniques are highlighted. The most widespread faults of electrical machines are discussed as well as techniques for parameters’ monitoring are introduced.

Motor-drive systems have the most significant share in industrial energy consumption, which requires a deep study in every aspect of the field. This paper presents a synchronous reluctance motor (SynRM) drive system based on Plecs RT box 1. The system’s design provides the opportunity for the open-loop and closed-loop control of the motor and a characteristic performance analysis of the motor. This paper focuses on the hardware implementation of a research laboratory setup and the precise vector control of the SynRM in real-time. The application of the digital controller and inverter to drive SynRM is examined. The voltage, current, and speed transducers were employed for monitoring the protective measures and to control the motor in the closed-loop. The design of the signal conditioning and the intermediary cards for isolation and data acquisition are described in detail. An algorithm is proposed to measure the whole system parameters, including motor, inverter, and cables. Thanks to the RT box 1, the principle of real-time simulation of control algorithms is investigated, and the rapid control prototyping of field-oriented control (FOC) of SynRM was implemented. The simulation of the system was carried out in the Plecs platform, and the results are presented. The experimental results of the implemented control algorithms validate the setup’s performance and the control algorithm. Finally, as a study of the motor’s performance, the efficiency map of the motor is drawn in different speed and torque ranges.

The growing need for intelligent machines, the outreach for more efficient use of the machines in industry, and the development of Industry 4 [...]

This paper presents the analytical calculation of the heat transfer coefficient of a complex housing shape of a Totally Enclosed Fan-Cooled (TEFC) industrial machine when it works below 20% of its nominal speed or close to stall. Therefore, passive cooling is dominant, and most of the heat is extracted by the combination of natural convection and radiation phenomena. Under these conditions, the area-based composite approach was used for the development of the analytical calculation method. A test rig using a TEFC Synchronous Reluctance Motor (SynRM) was constructed, and the collected experimental data was used to validate the proposed analytical method successfully.

Additive manufacturing of ferromagnetic materials for electrical machine applications is maturing. In this work, a full E-type transformer core is printed, characterized, and compared in terms of performance with a conventional Goss textured core. For facilitating a modular winding and eddy current loss reduction, the 3D printed core is assembled from four novel interlocking components, which structurally imitate the E-type core laminations. Both cores are compared at approximately their respective optimal working conditions, at identical magnetizing currents. Due to the superior magnetic properties of the Goss sheet conventional transformer core, 10% reduced efficiency (from 80.5% to 70.1%) and 34% lower power density (from 59 VA/kg to 39 VA/kg) of the printed transformer are identified at operating temperature. The first prototype transformer core demonstrates the state of the art and initial optimization step for further development of additively manufactured soft ferromagnetic components. Further optimization of both the 3D printed material and core design are proposed for obtaining higher electrical performance for AC applications.

A review of the fault diagnostic techniques based on machine is presented in this paper. As the world is moving towards industry 4.0 standards, the problems of limited computational power and available memory are decreasing day by day. A significant amount of data with a variety of faulty conditions of electrical machines working under different environments can be handled remotely using cloud computation. Moreover, the mathematical models of electrical machines can be utilized for the training of AI algorithms. This is true because the collection of big data is a challenging task for the industry and laboratory because of related limited resources. In this paper, some promising machine learning-based diagnostic techniques are presented in the perspective of their attributes.

This paper presents the modeling and the broken rotor bar fault diagnostics by time–frequency analysis of the motor current under an extended startup transient time. The transient current-based nonstationary signal is retrieved and investigated for its time–frequency response to segregate the rotor faults and spatial harmonics. For studying the effect of reduced voltage on various parameters and the theoretical definition of the fault patterns, the winding function analysis (WFA)-based model is presented first. Moreover, an algorithm to improve the spectrum legibility is proposed. It is shown that by efficient utilization of the attenuation filter and consideration of the area containing the maximum power spectral density, the diagnostic algorithm gives promising results. The results are based on the machine’s analytical model and the measurements taken from the laboratory setup.

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.

Additively manufactured soft magnetic Fe-3.7%w.t.Si toroidal samples with solid and novel partitioned cross-sectional geometries are characterized through magnetic measurements. This study focuses on the effect of air gaps and annealing temperature on AC core losses at the 50 Hz frequency. In addition, DC electromagnetic material properties are presented, showing comparable results to conventional and other 3D-printed, high-grade, soft magnetic materials. The magnetization of 1.5 T was achieved at 1800 A/m, exhibiting a maximum relative permeability of 28,900 and hysteresis losses of 0.61 (1 T) and 1.7 (1.5 T) W/kg. A clear trend of total core loss reduction at 50 Hz was observed in relation to the segregation of the specimen cross-sectional topology. The lowest 50 Hz total core losses were measured for the toroidal specimen with four internal air gaps annealed at 1200 °C, exhibiting a total core loss of 1.2 (1 T) and 5.5 (1.5 T) W/kg. This is equal to an 860% total core loss reduction at 1 T and a 510% loss reduction at 1.5 T magnetization compared to solid bulk-printed material. Based on the findings, the advantages and disadvantages of printed air-gapped material internal structures are discussed in detail.

In the above article [1], Figs. 3 and 19 are modified versions of Fig. 18 from the article. Although this source was cited in our article as [6], the captions for these figures are missing the appropriate citation/reference.

This paper presents an algorithm to remove the DC drift from the B-H curve of an additively manufactured soft ferromagnetic material. The removal of DC drift from the magnetization curve is crucial for the accurate estimation of iron losses. The algorithm is based on the sliding mean value subtraction from each cycle of calculated magnetic flux density (B) signal. The sliding mean values (SMVs) are calculated using the convolution theorem, where a DC kernel with a length equal to the size of one cycle is convolved with B to recover the drifting signal. The results are based on the toroid measurements made by selective laser melting (SLM)-based 3D printing mechanism. The measurements taken at different flux density values show the effectiveness of the method.

This paper presents the time-dependent variance in the current harmonics emission by power supplies during power quality measurements. Power quality problems are becoming more significant with the adoption of power electronic-based circuits such as power supplies. The switch-mode power supplies are widespread as industrial, commercial, and domestic electrical loads. They draw non-sinusoidal current from the utility and inject current harmonics. Therefore, they are the reason for poor power quality and reduction in the power factor. The current harmonics emission from these power supplies depends on the circuit topology, operating conditions, and filter inside them. The harmonic emission estimations are critical for network operators; however, various uncertainties have made it a complicated task. The time-dependent stability affects the magnitude and phase angle of the harmonic current measurements and estimation of power quality indices. This paper investigates the variation in current harmonics emitted by the power supply during the initial unstable period under constant load and operating conditions.

In this paper, the bearing faults analysis of the brushless DC motor is presented. The research method is based on the analysis of the vibration signal of healthy as well as faulty bearings by the identification of specific frequencies on the vibration spectrum. For the experiment, the most common faults were inflicted on the bearings. As the used motor is intended for electric scooter applications, seven different damages were chosen, which are highly likely to occur during the scooter operation. The main bearing faults and the possibility of fault monitoring are addressed. The vibration data are gathered by the acceleration sensors placed on the motor at different locations and the spectrum analysis is performed using the fast Fourier transform. The variation in the amplitude of the frequency harmonics particularly the fundamental component is presented as a fault indicator.

This paper presents a hybrid finite element method (FEM)–analytical model of a three-phase squirrel cage induction motor solved using parallel processing for reducing the simulation time. The growing development in artificial intelligence (AI) techniques can lead towards more reliable diagnostic algorithms. The biggest challenge for AI techniques is that they need a big amount of data under various conditions to train them. These data are difficult to obtain from the industries because they contain low numbers of possible faulty cases, as well as from laboratories because a limited number of motors can be broken for testing purposes. The only feasible solution is mathematical models, which in the long run can become part of advanced diagnostic techniques. The benefits of analytical and FEM models for their speed and accuracy respectively can be exploited by making a hybrid model. Moreover, the concept of cloud computing can be utilized to reduce the simulation time of the FEM model. In this paper, a hybrid model being solved on multiple processors in a parallel fashion is presented. The results depict that by dividing the rotor steps among several processors working in parallel, the simulation time reduces considerably. The simulation results under healthy and broken rotor bar cases are compared with those taken from a laboratory setup for validation.