Search

Despite the claim that technology has been one of the most important drivers of healthcare spending growth over the past decades, technology variables are rarely introduced explicitly in cost equations. Furthermore, technology is often considered exogenous. Using 1996-2007 panel data on Swiss geographical areas, we assessed the impact of technology availability on per capita healthcare spending covered by basic health insurance whilst controlling for the endogeneity of health technology availability variables. Our results suggest that medical research, patent intensity and the density of employees working in the medical device industry are influential factors for the adoption of technology and can be used as instruments for technology availability variables in the cost equation. These results are similar to previous findings: CT and PET scanner adoption is associated with increased healthcare spending, whilst increased availability of percutaneous transluminal coronary angioplasty facilities is associated with reductions in per capita spending. However, our results suggest that the magnitude of these relationships is much greater in absolute value than that suggested by previous studies that did not control for the possible endogeneity of the availability of technologies. Copyright © 2016 John Wiley & Sons, Ltd., (Copyright © 2016 John Wiley & Sons, Ltd.)

Freehand SPECT (fhSPECT) is a technology platform for providing 3-dimensional (3D) navigation for radioguided surgical procedures, such as sentinel lymph node (SLN) biopsy (SLNB). In addition to the information provided by conventional handheld gamma detection probes, fhSPECT allows for direct visualization of the distribution of radioactivity in any given region of interest, allowing for improved navigation to radioactive target lesions and providing accurate lesion depth measurements. Herein, we will review the currently available clinical data on the use of fhSPECT: (i) for SLNB of various malignancies, including difficult-to-detect SLNs, and (ii) for radioguided localization of solid tumors. Moreover, the combination of fhSPECT with other technologies (e.g., small field-of-view gamma cameras, and diagnostic ultrasound) is discussed. These technical advances have the potential to greatly expand the clinical application of radioguided surgery in the future.

Since January 2008-de facto 2012-medical physics experts (MPEs) are, by law, to be involved in the optimisation process of radiological diagnostic procedures in Switzerland. Computed tomography, fluoroscopy and nuclear medicine imaging units have been assessed for patient exposure and image quality. Large spreads in clinical practice have been observed. For example, the number of scans per abdominal CT examination went from 1 to 9. Fluoroscopy units showed, for the same device settings, dose rate variations up to a factor of 3 to 7. Quantitative image quality for positron emission tomography (PET)/CT examinations varied significantly depending on the local image reconstruction algorithms. Future work will be focused on promoting team cooperation between MPEs, radiologists and radiographers and on implementing task-oriented objective image quality indicators., (© The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.)

The article is devoted to clinical--economic analysis of modern diagnostic technology--magnetocardiography by analyzing the "cost-effectiveness". Economic effectiveness of diagnosis of coronary artery disease using magnetocardiography in terms of cost/effectivness is shown. The economicaly optimal sequence of several noninvasive methods for diagnosis of coronary artery disease is defined.

Purpose: To investigate the variation of imaging dose with tube potential in variable pitch body CT perfusion (CTp) protocols using the TG111 dosimetric formalism., Methods: TG111 recommendations were followed in choosing the phantom, dosimetric equipment, and methodology. Specifically, equilibrium doses (D(eq)) were measured centrally and peripherally in a long PMMA phantom. Reference planar average equilibrium doses were determined for each tube potential, for a reference set of exposure parameters (collimation, pitch, filtration) on a Siemens Definition CT scanner. These reference values were utilized to predict the imaging dose during perfusion scans using interpretations of the TG111 formalism. As a gold reference, the midscan average planar perfusion doses (D(CTp)) were obtained directly from central and peripheral D(eq) measurements for body CTp scans (144 and 271 mm) using variable pitch acquisition. Measurement-based D(CTp) values obtained using a thimble chamber were compared to the TG111-predicted values, and to CTDI(vol) reported at the console., Results: Reference planar average equilibrium dose values measured for reference uniform pitch helical scans were consistently higher than console-reported or measured values for CTDI(vol). The measurement-based perfusion dose D(CTp) was predicted accurately by the reported CTDI(vol) for the 144 mm scan. The 271 mm scans delivered systematically larger dose than reported. The TG111-based dose estimates were proven to be conservative, as they were systematically higher than both the measured and the reported imaging doses., Conclusions: Upon successful implementation of TG111 formalism, standard imaging dose was measured for a body CTp protocol using the variable pitch helical acquisition. The TG111 formalism is not directly applicable to this type of acquisition. Measurement of dose for all variable pitch protocols is strongly suggested.

Context: Radioiodine therapy of benign thyroid diseases requires pretherapy assessment of radioactive iodine uptake (RAIU) for reliable therapy planning., Objective: Our objective was to assess RAIU by low-activity (124)I-positron emission tomography/low-dose computed tomography ((124)I-PET/CT) in comparison with standard (131)I probe measurements., Design/setting: This prospective comparative study was conducted at the Jena University Hospital, Jena, Germany, in a referral center setting., Patients: A total of 79 patients with benign thyroid diseases were screened, 40 of whom met the inclusion criteria (stable TSH, free T3 and free T4 levels; no thyroid-specific medication, no iodine contamination) and 24 of whom agreed to participate by signing an informed consent., Interventions: All patients received the standard (131)I scintillation probe uptake test 30 hours after administration of 3 MBq (131)I. Seven days later, all patients were subjected to (124)I-PET/CT uptake measurement 30 hours after administration of 1 MBq (124)I., Main Outcome Measures: The decay-corrected uptake values of both techniques were compared. Additionally, 3 different volume-of-interest-based evaluation methods in PET/CT (whole neck [WN], automatic isocontour [IC], and manually contoured [MC]) were evaluated., Results: The (131)I probe measurement and (124)I-PET.WN method provided very similar mean RAIU (30.7% ± 10.3%; 31.7% ± 8.9%), resulting in a significant positive correlation (r = 0.93, P < .001). Compared with (124)I-PET.WN, the (124)I-PET.IC (29.8% ± 8.6%) and the (124)I-PET.MC (24.5% ± 7.1%) demonstrated lower uptake values., Conclusions: Using activities as low as 1 MBq, the (124)I-PET.WN method shows a good correlation with conventional (131)I probe measurement. Thus, (124)I-PET/CT is a suitable alternative for pretherapy RAIU evaluations. This may offer potential additional benefits such as PET/ultrasound fusion imaging and CT volumetry.

Objective: To design, build, and evaluate an animal PET scanner, which can be used with non-human primates under conscious condition, incorporating flat-panel position-sensitive photomultiplier tubes (PS-PMTs)., Methods: The system contains 30 detector modules, each having two PS-PMTs and 16×18 lutetium–yttrium oxyortho-silicate scintillation crystal arrays. The system has 17,280 crystals (480 per ring) arranged in 36 rings, with a diameter of 508 mm and axial extent of 108 mm. The gantry tilt mechanism enables PET studies to be performed on a monkey in the sitting position. Data can be acquired in either the 2D or 3D mode, with the slice collimators being retracted in the 3D mode., Results: At the center of the field-of-view, radial resolution is 2.7 mm full width at half maximum (FWHM) and tangential resolution is 2.4 mm FWHM, while axial resolution is 2.5 mm FWHM for direct slices and 2.7 mm FWHM for cross slices. Scatter fraction, count rate capability, and sensitivity were evaluated using a cylindrical phantom 10 cm in diameter. The noise equivalent count rate in the 3D mode is equivalent to that in the 2D mode at a three times higher radioactivity level. Total system sensitivity is 1.3 kcps/(kBq/mL) in 2D mode and 7.4 kcps/(kBq/mL) in the 3D mode. Animal studies with a monkey were performed to evaluate the imaging capabilities of the scanner., Conclusion: The new PET scanner will be a useful research tool with non-human primates for pre-clinical drug development.

In this article, we propose a quantification methodology for estimating the statistical parameters of the activity inside regions of interest (ROIs). Macroquantification implies a rearrangement of the emission projection data into macroprojections and a redefinition of the system matrix based either on an image reconstruction involving iterative ROI-wise regularization or on an ROI uniformity assumption. The technique allows a very fast computation of the ROI activities and covariance matrix in the least squares sense using a low-dimensional model of the tomographic problem. The macroquantification approach is evaluated through Monte Carlo simulations using a numerical thorax phantom, without taking into account the measurement artifacts and assuming a perfect a priori ROI definition. Various tumor ROI configurations and count rates are considered to reflect clinical situations. The results show that our technique yields low-bias ROI estimations that turn out to be more accurate than classical estimates relying on pixel summation. Macroquantification also provides an approximation for the ROI variance that describes the effective variance obtained through the simulations fairly well. The technique is then validated using single photon emission computed tomography (SPECT) data from a physical phantom composed of cylinders filled with different Tc concentrations for the task of ROI comparison. Here again, the study shows excellent agreement between the measured and predicted values of the ROI variance resulting in efficient estimations of ROI ratios and highly accurate ROI comparisons. In its simplest formulation, macroquantification has a short computation time, making it an ideal technique for quantitative ROI assessment that is compatible with a wide range of routine clinical applications.

We have developed a fast, user friendly, ray-tracing program, "CSIM" for low-energy gamma rays (up to ∼200keV) to simulate the performance characteristics of parallelhole collimators. We have used a ray-tracing approach to find the sensitivity and resolution of the parallelhole collimator by including the penetration of photons through the collimator due to the finite attenuation of the collimator material. "CSIM" can calculate the sensitivity of the collimator, the geometric and penetrating photon ratios, and the 1D and 2D point source response functions (PSF) with the statistical uncertainty for different hole shapes (e.g. square, hexagonal, and cylindrical). We have used "CSIM" to simulate the collimator of the YAP-(S)PETII small animal scanner. We present the analysis of the YAP-(S)PETII scanner round-hole parallel collimator designed for nuclear medicine imaging at 140keV. For this aim, different designs have been considered for a variety of source-collimator distances (b=5, 10, 15, 20cm). Resolution and sensitivity characteristics have been plotted as a function of the collimator thickness and the diameter of the hole. For each value of the source-collimator distance, and for each collimator thickness investigated, the trade-off between sensitivity and spatial resolution has been given as a series of characteristic curves. Then, we compare our simulated resolution and sensitivity results to the analytically calculated ones and found that the analytically calculated results for the YAP-(S)PETII scanner collimator are not far away the results predicted by CSIM and also with the experimentally measured resolution values., (Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.)

In this work we developed a Monte Carlo (MC) model of the Sedecal Argus pre-clinical PET scanner, using GATE (Geant4 Application for Tomographic Emission). This is a dual-ring scanner which features DOI compensation by means of two layers of detector crystals (LYSO and GSO). Geometry of detectors and sources, pulses readout and selection of coincidence events were modeled with GATE, while a separate code was developed in order to emulate the processing of digitized data (for example, customized time windows and data flow saturation), the final binning of the lines of response and to reproduce the data output format of the scanner's acquisition software. Validation of the model was performed by modeling several phantoms used in experimental measurements, in order to compare the results of the simulations. Spatial resolution, sensitivity, scatter fraction, count rates and NECR were tested. Moreover, the NEMA NU-4 phantom was modeled in order to check for the image quality yielded by the model. Noise, contrast of cold and hot regions and recovery coefficient were calculated and compared using images of the NEMA phantom acquired with our scanner. The energy spectrum of coincidence events due to the small amount of (176)Lu in LYSO crystals, which was suitably included in our model, was also compared with experimental measurements. Spatial resolution, sensitivity and scatter fraction showed an agreement within 7%. Comparison of the count rates curves resulted satisfactory, being the values within the uncertainties, in the range of activities practically used in research scans. Analysis of the NEMA phantom images also showed a good agreement between simulated and acquired data, within 9% for all the tested parameters. This work shows that basic MC modeling of this kind of system is possible using GATE as a base platform; extension through suitably written customized code allows for an adequate level of accuracy in the results. Our careful validation against experimental data confirms that the developed simulation setup is a useful tool for a wide range of research applications., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

We examine a maximum-a-posteriori method for estimating the primary interaction position of gamma rays with multiple interaction sites (hits) in a monolithic detector. In assessing the performance of a multiple-hit estimator over that of a conventional one-hit estimator, we consider a few different detector and readout configurations of a 50-mm-wide square cerium-doped lutetium oxyorthosilicate block. For this study, we use simulated data from SCOUT, a Monte-Carlo tool for photon tracking and modeling scintillation- camera output. With this tool, we determine estimate bias and variance for a multiple-hit estimator and compare these with similar metrics for a one-hit maximum-likelihood estimator, which assumes full energy deposition in one hit. We also examine the effect of event filtering on these metrics; for this purpose, we use a likelihood threshold to reject signals that are not likely to have been produced under the assumed likelihood model. Depending on detector design, we observe a 1%-12% improvement of intrinsic resolution for a 1-or-2-hit estimator as compared with a 1-hit estimator. We also observe improved differentiation of photopeak events using a 1-or-2-hit estimator as compared with the 1-hit estimator; more than 6% of photopeak events that were rejected by likelihood filtering for the 1-hit estimator were accurately identified as photopeak events and positioned without loss of resolution by a 1-or-2-hit estimator; for PET, this equates to at least a 12% improvement in coincidence-detection efficiency with likelihood filtering applied.

Objective: The aim of this study was to compare the performance of cone-beam computerized tomography (CBCT) with multislice CT (MSCT) and single photon emission CT (SPECT) in the detection of bone invasion from oral malignancies., Study Design: In this prospective investigation, 77 patients with histologically proven malignancy of the oral cavity received MSCT, CBCT, and SPECT imaging of the head presurgically. Radiologic evaluations were compared with histopathologic examinations of the resected tumor specimens. Receiver operating characteristic (ROC) analysis as well as the sensitivity, specificity, and positive and negative predictive values were calculated., Results: The sensitivity, specificity, positive predictive value, and negative predictive value for MSCT were 0.8, 1.0, 1.0, and 0.75, respectively; for CBCT 0.92, 0.965, 0.98, and 0.875; and for SPECT 0.91, 0.4, 0.7, and 0.75. ROC analysis showed area under the curve values of 0.894 (95% confidence interval [CI] 0.806-0.982) for MSCT; 0.931 (95% CI 0.835-1.000) for CBCT, and 0.716 (95% CI 0.566-0.866) for SPECT., Conclusion: CBCT is accurate in predicting malignancies' bone involvement and can compete with MSCT and SPECT in detecting bone invasion in patients with oral malignancies., (Copyright © 2011 Mosby, Inc. All rights reserved.)

The 4D extended cardiac-torso (XCAT) phantom was developed to provide a realistic and flexible model of the human anatomy and cardiac and respiratory motions for use in medical imaging research. A prior limitation to the phantom was that it did not accurately simulate altered functions of the heart that result from cardiac pathologies such as coronary artery disease (CAD). We overcame this limitation in a previous study by combining the phantom with a finite-element (FE) mechanical model of the left ventricle (LV) capable of more realistically simulating regional defects caused by ischemia. In the present work, we extend this model giving it the ability to accurately simulate motion abnormalities caused by myocardial infarction (MI), a far more complex situation in terms of altered mechanics compared with the modeling of acute ischemia. The FE model geometry is based on high resolution CT images of a normal male subject. An anterior region was defined as infarcted and the material properties and fiber distribution were altered, according to the bio-physiological properties of two types of infarction, i.e., fibrous and remodeled infarction (30% thinner wall than fibrous case). Compared with the original, surface-based 4D beating heart model of the XCAT, where regional abnormalities are modeled by simply scaling down the motion in those regions, the FE model was found to provide a more accurate representation of the abnormal motion of the LV due to the effects of fibrous infarction as well as depicting the motion of remodeled infarction. In particular, the FE models allow for the accurate depiction of dyskinetic motion. The average circumferential strain results were found to be consistent with measured dyskinetic experimental results. Combined with the 4D XCAT phantom, the FE model can be used to produce realistic multimodality sets of imaging data from a variety of patients in which the normal or abnormal cardiac function is accurately represented.

Unlabelled: In 2005, 8 Imaging Response Assessment Teams (IRATs) were funded by the National Cancer Institute (NCI) as supplemental grants to existing NCI Cancer Centers. After discussion among the IRATs regarding the need for increased standardization of clinical and research PET/CT methodology, it became apparent that data acquisition and processing approaches differ considerably among centers. To determine the variability in detail, a survey of IRAT sites and IRAT affiliates was performed., Methods: A 34-question instrument evaluating patient preparation, scanner type, performance approach, display, and analysis was developed. Fifteen institutions, including the 8 original IRATs and 7 institutions that had developed affiliate IRATs, were surveyed., Results: The major areas of variation were (18)F-FDG dose (259-740 MBq [7-20 mCi]) uptake time (45-90 min), sedation (never to frequently), handling of diabetic patients, imaging time (2-7 min/bed position), performance of diagnostic CT scans as a part of PET/CT, type of acquisition (2-dimensional vs. 3-dimensional), CT technique, duration of fasting (4 or 6 h), and (varying widely) acquisition, processing, display, and PACS software--with 4 sites stating that poor-quality images appear on PACS., Conclusion: There is considerable variability in the way PET/CT scans are performed at academic institutions that are part of the IRAT network. This variability likely makes it difficult to quantitatively compare studies performed at different centers. These data suggest that additional standardization in methodology will be required so that PET/CT studies, especially those performed quantitatively, are more comparable across sites.

Unlabelled: This study gathered information about clinical PET/CT operations worldwide to help guide discussions on the use and standardization of clinical PET/CT., Methods: A Web-based survey of PET/CT users was initiated in November 2009 through e-mail advertising using Academy of Molecular Imaging databases. Recipients were asked 58 questions related to demographics (e.g., location, number of PET/CT systems, and staffing), PET/CT operations and use, and variations in (18)F-FDG oncology imaging protocols., Results: The responders were from centers in the Americas (71%), Europe (22%), Asia-Pacific (6%), and Middle East (1%), with most responding sites representing public health care institutions (60%). PET/CT systems were most frequently installed in nuclear medicine departments (59%). Of the sites operating a PET/CT system, 16% had 10 y or more of stand-alone PET experience. About 40% of all sites operated at least 2 PET/CT systems. PET/CT was most frequently used for applications in torso or whole-body oncology (87%), radiation therapy planning (4%), cardiology (4%), and neurology (5%). The average interval of fasting before an (18)F-FDG PET/CT examination was 7 ± 3 h (range, 4-12 h). Blood glucose levels were measured at 99% of sites, but acceptable maximal glucose levels varied substantially (an upper limit of 200 mg/dL was applied at >50% of the institutions). A weight-based radioactivity dose injection was performed at 44% of sites. The mean (18)F-FDG activity injected was 390 MBq (range, 110-585 MBq) for 3-dimensional PET of a 75-kg patient. The mean uptake time was 64 ± 14 min (range, 20-90 min). Split protocols involving patient repositioning and adapted imaging parameters were used at 51% of sites. Only 41% used patient positioning aids. Intravenous or oral CT contrast material was used at 52% of sites in up to 25% of patients. Most sites (90%) measured maximum standardized uptake value as an index of tissue glucose use. Only 62% of sites provided a fully integrated PET/CT report., Conclusion: An international survey among clinical PET/CT users revealed significant variations in standard (18)F-FDG PET/CT protocols. This finding illustrates the need for continuous training and ongoing standardization in an effort to optimize PET/CT in oncology.

Transmission sources used for image attenuation correction, allowing image quantification, are collimated to reduce scatter. We propose the same effect can be achieved for an uncollimated source by increasing source to patient distance. The aim was to compare planar image performance characteristics and absorbed doses of uncollimated and collimated radioactive printed paper transmission sources. The scatter contribution to the uncollimated (⁹⁹m)Tc source data was evaluated for different combinations of detector phantom distance, detector source distance and phantom source distance. Measurements were performed by increasing the Lucite phantom thickness in 1cm steps to 20 cm. Spatial resolution, detection efficiency and entrance absorbed dose rate were measured for the uncollimated and collimated transmission source images. Results derived from the energy spectra, obtained with the uncollimated transmission source indicate that scatter contribution increases with decreasing detector source distance. The scatter component in the uncollimated transmission images (detector source distances ≥ 60 cm; phantom source distances ≥ 40 cm) was comparable to that obtained with collimated transmission images. Attenuation coefficients obtained compared well (0.168 cm⁻¹ vs. 0.171 cm⁻¹). The full widths at half maxima differed by less than 0.9 mm. The detection efficiency of the uncollimated source was 2.5 times higher than obtained with the collimated source. The entrance absorbed dose obtained from an uncollimated source was 3.75 times larger than that obtained from the collimated source. An uncollimated transmission source (detector source distance ≥ 60 cm) results in acceptable image characteristics and presents a low cost, low dose, high efficiency option for transmission imaging., (© 2010 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.)

Positron emission tomography (PET) has become a leading modality in molecular imaging. Demands for further improvements in spatial resolution and sensitivity remain high with growing number of applications. In this paper we present a novel PET system design that integrates a high-resolution depth-of-interaction (DOI) detector into an existing PET system to obtain higher-resolution and higher-sensitivity images in a target region around the face of the high-resolution detector. A unique feature of the proposed PET system is that the high-resolution detector can be adaptively positioned based on the detectability or quantitative accuracy of a feature of interest. This paper focuses on the signal-known-exactly, background-known-exactly (SKE-BKE) detection task. We perform theoretical analysis of lesion detectability using computer observers, and then develop methods that can efficiently calculate the optimal position of the high-resolution detector that maximizes the lesion detectability. We simulated incorporation of a high-resolution DOI detector into the microPET II scanner. Quantitative results verified that the new system has better performance than the microPET II scanner in terms of spatial resolution and lesion detectability, and that the optimal position for lesion detection can be reliably predicted by the proposed method.

Challenges remain in imaging complete dynamic physiological processes in vivo through the whole small animal body using fluorescence molecular tomography (FMT). In this article, a novel non-contact full-angle FMT system that enables whole-body simultaneous imaging of small animals is presented. The whole-body simultaneous imaging ability is achieved by employing a line-shaped parallel excitation source, which can provide extended spatial sampling dataset to reconstruct multiple fluorescent targets distributed in whole animal body during one full-angle FMT imaging process. The key performances of this system were evaluated by a series of experiments. Quantitation linearity for over two orders of magnitude of fluorescence markers concentration was demonstrated, and an accessible simultaneous imaging domain of 4.0 x 1.5 cm² could be achieved utilizing the parallel excitation pattern. Moreover, the in vivo imaging feasibility and performance were validated by localizing two fluorescent targets implanted at different positions of a nude mouse. The results suggest that compared with conventional single point excitation FMT system, the proposed system can achieve a whole-body simultaneous imaging domain and impart the ability to image complete dynamic physiological processes in vivo.

Purpose: The aim of this study was to examine growth trends in ownership or leasing of private-office PET scanners by nonradiologist physicians., Materials and Methods: The Medicare Part B Physician/Supplier Procedure Summary Master Files for 2002 through 2007 were used to collect the following data for each PET-related Current Procedural Terminology((R)) code: 1) annual procedure volume, 2) places of service for the procedures, and 3) specialties of the physicians filing the claims. To determine ownership or leasing, only technical and global claims that occurred in the nonhospital, private-office setting were included in the study. Professional component-only claims were not included. Procedure volume and growth trends were compared between radiologists and other specialties., Results: Between 2002 and 2007, radiologist-owned Medicare PET scans increased by 259%, whereas nonradiologist-owned or nonradiologist-leased scans grew by 737%. Five specialty groups accounted for 95% of all nonradiologist PET volume in 2007: internal medicine subspecialties (28,324 studies in 2007), medical oncology (14,320 studies), cardiology (13,724 studies), radiation oncology (9,563 studies), and primary care (2,398 studies). In 2002, of all Medicare PET examinations performed on units owned or leased by physicians, the share for nonradiologists was 13%; their share rose to 24% in 2007., Conclusion: Although a large percentage of PET scans in private offices are done by radiologists, the growth rate among nonradiologists was far higher between 2002 and 2007 (259% for the former, 737% for the latter). The disproportionately rapid growth of PET scans performed on units owned by nonradiologists raises concern about self-referral at a time when policymakers are struggling to contain costs and reduce radiation exposure.

We proposed a speed-enhanced tomographic reconstruction algorithm, ACOSEM (accelerated complete-data ordered-subset expectation-maximization), to accelerate a convergent OS-type algorithm (COSEM). The ACOSEM algorithm was based on modification of the COSEM update by applying an accelerating power factor or a bigger step size. Unlike the limited enhancement of the other speed-enhanced algorithm (E-COSEM), the proposed ACOSEM with an appropriate power factor can lead to a much faster reconstruction speed than COSEM and ECOSEM. Similar to COSEM, there is no free user-entered relaxation parameter needed for ACOSEM to ensure the convergent performance as required in the other type of fast convergent algorithms such as RAMLA. We derived the ACOSEM algorithm, and compared its performance to those of other fast convergent algorithms including COSEM, ECOSEM and RAMLA with optimized relaxation parameters. Though not convergent, OSEM is the current state-of-the-art reconstruction method used in the clinics, and thus included in the noise performance comparison. The results showed that ACOSEM reached the same image quality as in COSEM but two times faster when a power factor of 2.0 was used. An upper limit of 5 for the power factor with monotonically increasing log-likelihood in ACOSEM was observed under various conditions. Although the convergence proof is not available now, the results of log-likelihood values and noise studies showed that ACOSEM performed consistently with COSEM but with an accelerating reconstruction speed.

Multimodality image registration and fusion have a key role in routine diagnosis, staging, restaging, and the assessment of response to treatment, surgery, and radiotherapy planning of malignant disease. The complementarity between anatomic (CT and MR imaging) and molecular (SPECT and PET) imaging modalities is well established and the role of fusion imaging widely recognized as a central piece of the general tree of clinical decision making. Moreover, dual modality imaging technologies including SPECT/CT, PET/CT, and, in the future, PET/MR imaging, now represent the leading component of contemporary health care institutions. This article discusses recent advances in clinical multimodality imaging, the role of correlative fusion imaging in a clinical setting, and future opportunities and challenges facing the adoption of multimodality imaging.

Radiology is strongly depending on medical imaging technology and consequently directing technological progress. A novel technology can only be established, however, if improved diagnostic accuracy influence on therapeutic management and/or overall reduced cost can be evidenced. It has been demonstrated recently that Magnetic Resonance Imaging (MRI) and Positron Emission Tomography (PET) can technologically be integrated into one single hybrid system. Some scientific arguments on the benefits are obvious, e.g., that simultaneous imaging of morphological and functional information will improve tissue characterization. However, crossfire of questions still remains: what unmet radiological needs are addressed by the novel system? What level of hardware integration is reasonable, or would software-based image co-registration be sufficient? Will MR/PET achieve higher diagnostic accuracy compared to separate imaging? What is the added value compared to other hybrid imaging modalities like PET/CT? And finally, is the system economically reasonable and has the potential to reduce overall costs for therapy planning and monitoring? This article tries to highlight some perspectives of applying an integrated MR/PET system for simultaneous morphologic and functional imaging.

Objective: This study demonstrates images obtained by (90)Y bremsstrahlung emission computed tomography (BECT), and characterizes the system performance of gamma cameras., Methods: (90)Y BECT images of phantoms were acquired using a gamma camera equipped with a medium energy general purpose parallel-hole collimator. Three energy window widths of 50% (57-94 keV) centered at 75 keV, 30% (102-138 keV) at 120 keV, and 50% (139-232 keV) at 185 keV were set on a (90)Y bremsstrahlung spectrum. The images obtained with three energy windows were reconstructed using filtered back projection (FBP) and ordered subsets expectation maximization (OSEM) methods. The images of the sum window were obtained by fusing the images of the 75, 120, and 185 keV windows., Results: The OSEM method improved the full width at half maximum by 20% and the standard deviation by 9% compared with the FBP method. BECT displayed (90)Y biodistribution and quantified (90)Y activity. BECT images obtained with OSEM method using the 120 keV window showed the highest resolution and lowest uncertainty. The sum window showed the highest sensitivity, while its resolution was 10% inferior to that of the 120 keV window. One whole-body image can be taken over 100 min using the sum window. An absorber to cover the body surface reduced background by 30%., Conclusions: (90)Y BECT imaging can be used for patient assessment without modifying current treatment procedures.

After a brief review of the history of time-of-flight (TOF) positron emission tomography (PET) instrumentation from the 1980s to present, the principles of TOF PET are introduced, the concept of time resolution and its effect on TOF gain in signal-to-noise ratio (SNR) are discussed. The factors influencing the time resolution of a TOF PET scanner are presented, with focus on the intrinsic properties of scintillators of particular interest for TOF PET. Finally, some open issues, challenges and achievements of today's TOF PET reconstruction are reviewed: the structure of the data organization, the choice of analytical or iterative method, the recent experimental assessment of TOF image quality, and the most promising applications of TOF PET.

Although PET imaging has been available for more than two decades, its use has greatly increased lately due to the advent of PET/CT, readily available sources of commercially supplied FDG, and mobile scanners. These features have enabled PET scanning to expand beyond select major university medical centers, with on-site cyclotron facilities to smaller institutions including free- standing children's hospitals. In these settings, imaging is generally limited to FDG, which suffices for most applications, with the majority of studies performed for tumor imaging. FDGI is being used for evaluation of many tumors in children, with its use in lymphoma being the most established. In lymphoma, it has proven quite useful in determining whether active tumor is present in residual masses following treatment, which may otherwise contain only residual fibrous tissue. For brain tumors, FDGI has some relation to tumor grade, although its more important role is distinguishing recurrent or residual tumor from the effects of treatment, particularly radiation necrosis. For neurological evaluation, interictal FDGI is helpful in localizing potential seizure foci for subsequent subdural EEG monitoring. Because of the relatively long uptake time of FDG, true ictal studies cannot be performed with FDG, and these remain within the domain of SPECT imaging of tracers such as Tc-99m HMPAO. Examinations utilizing radiopharmaceuticals other than FDG are significantly more limited in their availability and are limited to PET centers with on-site cyclotrons. However, these additional agents open the door to many additional studies, including more specific tumor-imaging agents of certain tumors such as neuroblastoma. Another neurotransmitter, F-18-fluoro-L-dopa, is of benefit outside of the central nervous system for evaluating infantile hyperinsulism. The use of PET/CT in children is increasing quickly, particularly FDGI imaging of tumors. It is expected that over the next few years, its role will become increasingly better defined.

The combination of functional and morphological imaging technologies such as positron emission tomography (PET) and X-ray computed tomography (CT) has shown its value in the clinical and preclinical field. However, CT provides only very limited soft-tissue contrast and exposes the examined patient or laboratory animal to a high X-ray radiation dose. In comparison to CT, magnetic resonance tomography (MRI) provides excellent soft-tissue contrast and allows for nuclear magnetic resonance spectroscopy (NMRS) or functional MRI (fMRI). Thus, the combination of PET and MRI has been pursued for several years. First approaches have succeeded using conventional photo multiplier tube (PMT) technology together with light fibers to transfer scintillation light away from the high magnetic field. Latest PET/MRI developments use solid-state light detectors that can be operated even at high magnetic fields. Initial pilot studies with prototype animal PET/MRI systems have shown promising results by combining high resolution morphology with multifunctional information isochronously.

This paper describes the implementation of neutron-stimulated emission computed tomography (NSECT) for non-invasive imaging and reconstruction of a multi-element phantom. The experimental apparatus and process for acquisition of multi-spectral projection data are described along with the reconstruction algorithm and images of the two elements in the phantom. Independent tomographic reconstruction of each element of the multi-element phantom was performed successfully. This reconstruction result is the first of its kind and provides encouraging proof of concept for proposed subsequent spectroscopic tomography of biological samples using NSECT.

The symptoms of spinal arachnoid cysts are variable and nonspecific, so they are commonly misdiagnosed. Often the cysts are discovered incidentally on magnetic resonance imaging (MRI). If they cause no symptoms, no treatment is warranted regardless of the size of the cyst. Cysts that cause symptoms from mechanical compression of the spinal cord are best evaluated with MRI and surgically excised if possible.

Cardiac image registration, in the context of the left atrium, is intermodal, with the acquired image and the real-time reference image residing in different image spaces, and involves optimization, where one image space is transformed into the other. Geometry-based methods, which include using fiducial points and/or surface-based techniques, are usually used for cardiac image registration. During fiducial point registration, fiducial points are either external skin markers or manually determined by marking anatomical landmarks using mapping catheters. Usually, a minimum of three noncollinear points is needed for optimal registration. During surface registration, each of the images' surfaces are characterized to determine the best transformation between them. Unlike the rigid body registration used extensively in the study of the brain, cardiac image registration is unique and challenging. In addition to the errors inherent in intermodal registration, errors due to respiration and cardiac motion during the cardiac cycle are specific to cardiac image registration. This review addresses the basic principles of registration and the inherent registration errors as they relate to cardiac imaging and registration.

Introduction: Increased abdominal visceral fat has been shown to be a cardiovascular risk factor. Preliminary studies indicate that pericardiac fat (PF) may provide similar information. We aimed to develop new software (QFAT) for automatic quantitation of PF from noncontrast cardiac CT and compare PF measures to other cardiovascular risk factors., Methods: QFAT accepts user-defined range of noncontrast transverse cardiac CT slices, automatically segments the heart, and determines PF volume (PFV) as contiguous pericardial fat voxels. PFV normalized to cardiac volume defines PF ratio (PFR). QFAT and manual processing (MAN) was performed in 105 patients (mean BMI, 27; range, 17-41) by 2 observers., Results: Mean processing time was 20 +/- 4 seconds for QFAT, and 9 +/- 6 minutes for MAN. There was excellent agreement between QFAT and MAN for PFV (R = 0.98) and PFR (R = 0.98). MAN and QFAT interobserver variability were comparable. Interscan and interscanner variability for PFV and PFR were comparable to corresponding interobserver variability. PFV (R = 0.88, P < 0.0001) and PFR (R = 0.81, P < 0.0001) correlated strongly with abdominal visceral fat area, moderately with BMI (R = 0.58, P < 0.0001 and R = 0.48, P < 0.0001), and weakly with abdominal subcutaneous fat area (R = 0.33, P < 0.0001 and R = 0.32, P = 0.001)., Conclusions: PFV and PFR can be accurately and automatically quantified from noncontrast CT acquired for coronary calcium screening and may provide complementary information regarding cardiovascular risk.

Unlabelled: The aim of this study was to investigate the impact of the lower energy threshold (LET) on the NEMA NU2-2001 count-rate performance of a LSO-based PET scanner (Siemens PET-CT Biograph Sensation 16). The quantitative measurements were focused on three different aspects: noise equivalent count rate (NEC), scatter fraction, and absolute sensitivity., Methods: According to the NEMA-NU2-2001 protocol count-rate-performance (NEC-2R, scatter fraction) and sensitivity were evaluated performing serial measurements at LETs of 350, 375, 400, 410, 420, 430, 440, and 450 keV (the upper energy threshold was fixed to 650 keV). NEMA protocols were adapted to account for the intrinsic radioactivity of (176)Lu in the LSO crystals., Results: Up to a radioactivity concentration of 8 kBq/ml the highest NEC-rates were obtained at an LET of 410 keV, between 8 and 20 kBq/ml at an LET of 420 keV and above 20 kBq/ml at an LET of 430 keV. The overall NEC maximum was 67 kcps at 430 keV (at 28 kBq/ml). The minimum scatter fraction was measured at a radioactivity concentration of approximately 0.5 kBq/ml. The scatter fraction decreased continuously from 45% at an energy threshold of 350 keV to 24% at 450 keV. The maximum sensitivity of 5.8 kcps/MBq, was obtained at an LET of 350 keV and the minimum sensitivity of 4.2 kcps/MBq at an LET of 450 keV. At the LET with the maximum NEC-rate (430 keV) the sensitivity was 4.8 kcps/MBq., Conclusion: The optimal count-rate performance of the LSO-based PET system was found at LETs between 410 keV and 430 keV depending on the actual radioactivity concentration placed in the scanner. A global maximum in NEC count rate was obtained at an LET of 430 keV.

Objective: The purpose of this study was to propose our CT-based planning approach for knee arthroplasty on the basis of the femoral flexion-extension (FE) axis, and to evaluate whether this approach was valid by comparing the results with those obtained using conventional anterior-referenced planning., Materials and Methods: Virtual implantation of a sagittal single-radius component was performed in 34 normal knees. The transepicondylar axis (TEA) was identified as the FE axis, and was modified in the coronal plane to intersect the femoral mechanical axis at a right angle, if necessary. The implant was then selected that had a radius closest to the distance between the modified TEA and the distal condyle end. The implant position and size were compared for the two plans., Results: In almost all cases, slight modification of the TEA was required. However, there was no significant change in the distance from the TEA to the posterior and distal condyles. In comparison to the results obtained with our planning approach, the conventional plan resulted in antero-superior deviation of the implant sagittal center to the FE axis and/or selection of a larger size of prosthesis., Conclusion: Although the TEA must be modified slightly when referencing it as the FE axis, our planning approach may be valid for femoral single-radius components because the single axis of the component could be matched with the FE axis.

Cardiovascular CT represents an important innovation in cardiac imaging as a noninvasive modality for the diagnosis of coronary artery disease. As a screening examination, coronary CT has the ability to identify the presence, extent, location, and severity of coronary artery disease in patients at risk. As a diagnostic examination in patients with chest discomfort and dyspnea, it can not only evaluate for the presence of coronary artery disease but also evaluate the pulmonary vasculature and aorta. The ability to perform high-quality cardiac CT requires a combination of technical expertise and knowledge of cardiac anatomy. From our experience having performed over 6000 cardiac CTs, we provide the reader with a number of clinical and technical pearls that will enhance his or her ability to perform high-quality studies even in the more challenging patient.

Contrast media are known to have transient hemodynamic properties that can influence a patient's clinical status, including heart rate variability and blood pressure. These changes have the potential to impact the diagnostic quality of CT scans. Although most patients are able to receive contrast media without significant adverse reactions, events occur in a minority of cases. These reactions range from mild discomfort (injection-associated pain and heat sensation) to more significant cardiac, renal, and hypersensitivity reactions. The incidence of adverse reactions varies with the type of contrast media used, and several randomized trials have elucidated the cardiac and renal differences among agents. Risk factors for contrast-induced acute kidney injury (CIAKI) have been established, with baseline kidney disease amplified by the presence of diabetes constituting the highest-risk patient group. Strategies for preventing CIAKI include antioxidant therapy, hydration regimens, and choice of contrast agents. Enhanced knowledge on the part of physicians and medical personnel regarding the properties and potential side effects of iodinated contrast agents should lead to improved patient safety and efficacy when performing radiologic examinations.

The anatomical structure of biological tissues and their mechanical function are closely related. Forces have a decisive influence on growth and remodeling of tissues; furthermore, intra- and extravascular transport processes are mostly controlled mechanically and the metabolism of many cells is influenced by flow-induced shear stresses. In order to facilitate a mechanical analysis of biological systems, the anatomical tissue structure has to be determined with the aid of 3D imaging methods. In particular, the anisotropic fibrous architecture of the organs involved along with appropriate constitutive relations have to be considered. Examples of structure-(mechanical) function relationships are discussed in an exemplary fashion for bone, the heart and the uterus. The behavior of biological structures under unphysiological loading situations, such as they may occur in accidents, is addressed.

Aims and Objectives: 1. To evaluate whether CT helps in the early diagnosis of pulmonary manifestations in SLE. 2. To study the pulmonary involvement and determine the incidence and type of pulmonary involvement., Materials and Methods: Thirty eight patients fulfilling ACR classification criteria for SLE were studied. Chest X-ray, pulmonary function tests (PFT), HRCT scan thorax were done. Investigations were done to detect other organ involvement. Patients with known interstitial lung disease (occupational hazard) or pregnant females were excluded., Results: Clinical signs and symptoms referable to pulmonary involvement were present in 9 patients (23.68%). HRCT thorax detected abnormalities in 21 patients (55.26%); pulmonary function abnormalities were present in 11 patients (28.95%) and plain X-ray chest abnormalities were present in 7 patients (18.42%). Out of 38 patients pulmonary involvement was present in 22 (57.89%) cases and HRCT thorax findings were present in 21 (95.45%) of them., Conclusion: Pulmonary involvement is present in a significant number of SLE patients, who are often asymptomatic, with normal chest X-ray or normal PFT. HRCT scan thorax could diagnose the pulmonary involvement in asymptomatic patients with normal chest X-ray and uncertain PFT.

Primary liver tumours are very rare in the neonatal period. Differential diagnoses include haemangioendothelioma, malignant hepatoblastoma and mesenchymal hamartoma. Due to non-specific clinical symptoms and indecisive imaging findings, correct diagnosis may be difficult to establish. We report a female preterm newborn who was delivered at 33 weeks of gestation and in whom ultrasonography (US) revealed a large cystic intraabdominal tumour of unknown origin. For further evaluation, contrast-enhanced multidetector computed tomography (CT) was performed on the 4th day of life using a low-dose protocol (80 kVp, 50 mAs, collimation 0.75 mm, total effective dose 3.6 mSv). Based on CT findings, diagnosis of an intrahepatic mesenchymal hamartoma was made and confirmed by tumour resection and histopathological examination. In conclusion, multidetector CT (MDCT) using a low-dose protocol can be exceptionally used to establish diagnosis of a mesenchymal hamartoma in a preterm newborn.

Purpose: The aim of this study was to evaluate the diagnostic accuracy of dual-source computed tomography (DSCT) with reference to invasive coronary angiography in the diagnosis of coronary artery disease (CAD) on a per-patient as well as on a per-segment basis., Materials and Methods: Thirty-five patients with known or suspected CAD underwent both DSCT (Somatom Definition, Siemens Medical Solutions) and quantitative x-ray coronary angiography (QCA). Parameters of CT acquisition were gantry rotation time 0.330 seconds (ie, temporal resolution 83 milliseconds), tube voltage 120 kV, tube current 560 mA with ECG-triggered tube current modulation and full current at 70% of the cardiac cycle for heart rates below 70 beats per minute or full current between 30% and 80% for higher and arrhythmic heart rates. The pitch was also adapted to the heart rate, ranging from 0.2 to 0.43. Volume and flow rate of contrast material (Ultravist 370, Schering AG) were adapted to the patient's body weight. Sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) of DSCT in the detection or exclusion of significant CAD (ie, stenoses >50%) were evaluated on a per-patient and per-segment basis., Results: All 35 CT angiograms were of diagnostic image quality. QCA demonstrated significant CAD in 48% (n = 17) and nonsignificant disease or normal coronary angiograms in 52% (n = 18) of the patients. Sensitivity, specificity, PPV, and NPV of DSCT on a per-patient basis were 100%, 89%, 89%, and 100%, respectively. On a per-segment basis, 473 of 481 coronary artery segments were assessable (98%). QCA demonstrated stenoses >50% in 32 segments (7%), and no disease or nonsignificant disease in 433 segments (93%). For the detection of stenoses >50% on a per-segment basis, DSCT showed a sensitivity, specificity, PPV, and NPV of 88%, 98%, 78%, and 99%, respectively., Conclusions: The comparison of coronary DSCT with QCA shows a very robust image quality and a high diagnostic accuracy in a patient-based as well as a per-segment analysis. Maximal sensitivity and NPV in the per-patient analysis show the strength of the technique in ruling out significant CAD.

Objectives: Implementation and evaluation of retrospective respiratory and cardiac gating of mice and rats using a flat-panel volume-CT prototype (fpVCT)., Materials and Methods: Respiratory and cardiac gating was implemented by equipping a fpVCT with a small animal monitoring unit. ECG and breathing excursions were recorded and 2 binary gating signals derived. Mice and rats were scanned continuously over 80 seconds after administration of blood-pool contrast media. Projections were chosen to reconstruct volumes that fall within defined phases of the cardiac/respiratory cycle., Results: Multireader analysis indicated that in gated still images motion artifacts were strongly reduced and diaphragm, tracheobronchial tract, heart, and vessels sharply delineated. From 4D series, functional data such as respiratory tidal volume and cardiac ejection fraction were calculated and matched well with values known from literature., Discussion: Implementation of retrospective gating in fpVCT improves image quality and opens new perspectives for functional cardiac and lung imaging in small animals.

Objectives: As pulmonary complications are life limiting in patients with cystic fibrosis (CF), repeated chest imaging [chest x-ray, computed tomography (CT)] is needed for follow up. With the continuously rising life expectancy of CF patients, magnetic resonance imaging (MRI) as a radiation-free imaging modality might become more and more attractive. The goal of this study was to prospectively assess the value of MRI for evaluation of morphologic pulmonary CF-changes in comparison to established imaging modalities., Materials and Methods: Thirty-one CF patients (19 female, 12 male; mean age 16.7 years) with stable lung disease were examined by MRI: HASTE, coronal/transversal (TR/TE/alpha/TA: infinite/28 ms/180 degrees /18 s), multi-detector computed tomography (MDCT) (30 patients): 120 kV, dose modulated mAs, and chest x-ray (21 patients). Image evaluation: random order, 4 chest radiologists in consensus; chest x-ray: modified Chrispin-Norman score; CT and MRI: modified Helbich score. The maximal attainable score for chest x-ray was 34, for MRI and CT 25. Median scores, Pearson correlation coefficients, Bland-Altman plots, and concordance of MRI to CT on a lobar and segmental basis were calculated., Results: The median MRI and MDCT scores were 13 (min 3, max 20) respectively 13.5 (min 0, max 20). The median chest x-ray score was 14 (min 5, max 32). Pearson correlation coefficients: MRI/CT = 0.80, P < 0.0001; MRI/chest x-ray = 0.63, P < 0.0018; chest x-ray/CT = 0.75, P < 0.0001. The median lobe related concordance was 80% for bronchiectasis, 77% for mucus plugging, 93%, for sacculation/abscesses, and 100% for collapse/consolidation., Conclusions: Morphologic MRI of the lung in CF patients demonstrates comparable results to MDCT and chest x-ray. Because radiation exposure is an issue in CF patients, MRI might have the ability to be used as an appropriate alternative method for pulmonary imaging.

The stage of non-small cell lung cancer (NSCLC) determines that the treatment strategy and proper staging lead to improved survival. Integrated positron emission tomography/computerized tomography (CT) scan provides more accurate staging and better targets for biopsy than traditional methods such as CT scans of the chest and upper abdomen, bone scans, and magnetic resonance imaging scans. Integrated positron emission tomography/CT is the best initial test for an indeterminate pulmonary nodule that is 8 mm or greater; for the noninvasive staging of patients with NSCLC, it is the only test that produces a quantitative assessment of an NSCLC's virulence or biologic aggressiveness in a particular patient and is the best tool for restaging patients after radiation and and/or chemotherapy. Finally, its use as a tool for postoperative surveillance is under study.

Transmission scanning-based estimation of the attenuation map plays a crucial role in quantitative radionuclide imaging. X-ray computed tomography (CT) reconstructs directly the attenuation coefficients map from data transmitted through the object. This paper proposes an alternative route for reconstructing the object attenuation map by exploiting Compton scatter of transmitted radiation from an externally placed radionuclide source. In contrast to conventional procedures, data acquisition is realized as a series of images parameterized by the Compton scattering angle and registered on a stationary gamma camera operating without spatial displacement. Numerical simulation results using realistic voxel-based phantoms are presented to illustrate the efficiency of this new transmission scanning approach for attenuation map reconstruction. The encouraging results presented in this paper may suggest the possibility of proposing a new concept for emission/transmission imaging using scattered radiation, which has many advantages compared to conventional technologies.

Aims: Although previous generations of multislice computed tomography (CT) have demonstrated accurate detection of obstructive bypass graft disease, progression of coronary disease is a more frequent cause for ischaemic symptoms late after bypass graft surgery. We explored the diagnostic performance of 64-slice CT in symptomatic patients after bypass surgery, for the assessment of both grafts and native coronary arteries., Methods and Results: The 64-slice CT angiography (Siemens Sensation 64, Germany) was performed in 52 symptomatic patients, 10 +/- 5 years after bypass surgery. Two independent, blinded observers assessed all grafts and coronary arteries for stenosis, using conventional quantitative angiography as a reference. A total of 109 grafts (182 graft segments), 123 distal coronary run-offs, and 116 non-bypassed coronary branches (288 segments) were analysed. Per-segment detection of graft disease yielded a sensitivity of 99% (71/72) and specificity of 96% (106/110). Sensitivity and specificity to detect run-off disease were 89% (8/9) and 93% (106/114), positive predictive value was 50% (8/16). In non-grafted coronary segments, CT detected significant stenosis with a sensitivity and specificity of 97% (62/64) and 86% (192/224). Overestimation occurred more frequently in calcified segments (P = 0.002)., Conclusion: The 64-slice CT allows angiographic evaluation of grafts and coronary arteries, although overestimation of coronary obstruction occurs, particularly in the presence of calcified disease.