Search

Image acquisition from autonomous underwater vehicles (AUVs) is useful for mapping objects on the seabed. However, there are few studies on the interpretation of data collected with side-scan sonar during autonomous underwater vehicle missions. By recording the seabed with 3D multibeam sonar, a large number of survey points can be obtained. The collected data are processed using applications based on remote sensing image processing. The data collected during AUV missions (or other sonar carriers) needs to be pre-processed to reach the proper effectiveness level. This process includes corrections of signal amplification (Time Varying Gain, or TVG) and geometric distortions of sonar images (Slant Range Corrections). It should be mentioned that, when carrying out the interpretation process for structures on the sea floor, sonar users need to understand the process of visualising seabed projections and depressions, as well as the resolution limitations of the sonar sensors.

The method of the stochastic Markov process used for the analysis of operation of a training aircraft-Cessna 150 was presented in the article. In this article, the time changing probability of readiness was determined on the basis of knowledge of the current aircraft operation. Markov stochastic processes have been used as a model to determine aircraft-Cessna 150 readiness for specific tasks. In order to determine the readiness, the probability of being in one of the investigated states is determined. The analysed states included: standby, pre-flight service, flight, interstate service, after-flight service and hangar service.

In the era of globalization and permanent travel of people between far away regions of the world, air transport is one of the most important means of transport. Today it is also one of the most secure transport modes possibilities. Despite this, it is crucial to continuously improve the level of safety and reduce the absolute number of accidents and their victims. This idea stands at the beginning of the article subject creation and at the same time an attempt to further improve safety. The safety of the pilots and passengers plays a crucial role during air operations. One of the most important factors is the reliability of the aircraft. The main goal in the reliability work is to estimate the percentage of units of a product that will still be functioning after a particular period of time. In order to be able to make such a statement, it is necessary to select a probability distribution that will facilitate the construction of reasonably precise probability statements of the type that one wishes to make. In this analysis, the number of hours between failures has been used as the main variable for reaching the conclusion about the reliability of the aircraft at the selected examples.

In most NATO countries, helicopter pilots are prepared in accordance with a modern system of threestage training: selection, basic and advanced. The training in the air is performed according to the parallelism of the training. The scheduling of pilot training process based on parallel model, which includes the technological relationships between the individual exercises, whereby for each air exercise, the exercises are specified, which must be done beforehand. The purpose of this contribution is to propose a multi-criteria mathematical model which would enable the selection of exercises for each pilot, the appropriate selection of the aircraft and the moment of beginning of each exercise, so that all required exercises will be carried out in the shortest possible time and the number of trained, in a state of readiness pilots, should be as high as possible. Additionally, in this paper the sketch of a multi-criteria solution is presented. A crucial feature of this work is the model application to optimize pilot training.

In the time of globalization and the continuous travelling of people between different parts of the world, air transportation is becoming one of the most important modes of transport. Nevertheless, it is crucial to continuously improve the level of safety and reduce the absolute number of accidents and their victims. The risk analysis with the usage of IT system TURAWA, which was developed to collect the aircraft’s accidents informations, has been discussed in the presented article. Calculation of risk is based on the data sample collected in the operation process. The implementation of the risk of potential failure event in TURAWA is presented and compared with the prediction of such situation by the decision trees. It has been concluded that models should be developed, which cause in the elimination of the human factor from the decision making chain.

This article is focused on the research concerning the calculation of the durability of electrical machines installed in the electrical system of M-28 and C-130 Hercules aircraft. The article presents a method of predicting the service life of aircraft commutator machines, which are the primary source of electrical energy. The result of the research was the determination of the durability of bearings and coils of electrical machines operated on aircraft based on a flight profile analysis. It is problematic to directly measure the wear of bearings and windings of an electric machine on the aircraft. Their usage can be determined from the relation between their wear and the ambient temperature. This research can be used in practice to plan maintenance work on the analyzed aircrafts. [ABSTRACT FROM AUTHOR]

The aim of this paper is to find a trend in air transport behaviour in the Czech Republic and Poland, based on data collected between the years of 2004 and 2016. The choice of data period for the analysis was made because of the date when both mentioned countries joined the European Union and availability of data. The data used in this article is provided from the Eurostat web page where many revealing statistics are collected. The correlations of indicators were chosen as a method of the analysis. It was observed that the number of passengers increased up to 30% and 460%, respectively, in the Czech Republic and in Poland. The authors will explain possible reasons and aspects of such behaviour in order to make some predictions for future trends in air transport. The additional aim is to understand transport processes and economic growth in neighbouring countries during the period of focus. The knowledge of conditional changes in the number of passengers utilizing air transport grants the ability to make forecasts about the needed infrastructure, number of aircrafts, pilots, and staff needed at the airports., 1. Introduction The increase in demand for air transport has led to specialization in a wide range of tasks. As a result of changes in the development of air transport [...]