Search

Creep behavior of Cross-Laminated-Timber (CLT) beams with a finite-thickness layer of flexible adhesives is investigated. Creep tests were carried out for all component materials as well as for the composite structure itself. Three-point bending creep tests were performed for spruce planks and for CLT beams, and uniaxial compression creep tests were performed for two flexible polyurethane adhesives: Sika® PS and Sika® PMM. All materials are characterized with the use of the three-element Generalized Maxwell Model. The results of creep tests for component materials were used in elaboration of the Finite Element (FE) model. The problem of linear theory of viscoelasticity was solved numerically with the use of the Abaqus software. Obtained results of Finite Element Analysis (FEA) are compared with experimental results.

Research conducted in the framework of the J-PET project aims to develop a cost-effective total-body positron emission tomography scanner. As a first step on the way to construct a full-scale J-PET tomograph from long strips of plastic scintillators, a 24-strip prototype was built and tested. The prototype consists of detection modules arranged axially forming a cylindrical diagnostic chamber with the inner diameter of 360 mm and the axial field-of-view of 300 mm. Promising perspectives for a low-cost construction of a total-body PET scanner are opened due to an axial arrangement of strips of plastic scintillators, wchich have a small light attenuation, superior timing properties, and the possibility of cost-effective increase of the axial field-of-view. The presented prototype comprises dedicated solely digital front-end electronic circuits and a triggerless data acquisition system which required development of new calibration methods including time, thresholds and gain synchronization. The system and elaborated calibration methods including first results of the 24-module J-PET prototype are presented and discussed. The achieved coincidence resolving time equals to CRT = 490 $\pm$ 9 ps. This value can be translated to the position reconstruction accuracy $\sigma(\Delta l) =$ 18 mm which is fairly position-independent., Comment: Accepted for publication in IEEE Transactions on Instrumentation and Measurement

The purpose of this work was to determine whether the structures of ordered part of novel poly(3,4-ethylenedioxythiophene) PEDOT : OTf (doped with trifluoromethanesulfonate anions) and PEDOT : HSulf (doped with hydrogensulfate anions) systems could really be simply the layered structure of PEDOT : Tos (doped with tosylate anions) with the counter ion changed to the appropriate one. Insight into this problem could be provided by molecular dynamics simulations but also by swarm intelligence optimization, developed earlier for the purpose of investigating the other structures.

The article presents testing of the mechanical properties of SIKA® polymer adhesives of the type PBM, PMM, PM, and PSM in the aspect of an attempt to determine the parameters of the Mooney-Rivlin hyperelastic model. The article contains a literature review on developed models for hyperelastic materials as well as a description of the author’s own results obtained in monaxial tensile and monaxial compression tests conducted on oars and cylindrical samples, respectively. Furthermore, the results of modeling of Mooney-Rivlin hyperelastic model parameters are shown in relation to the value of average parameters for polymers after both a week and a month-and-a-half of ripening.

Objective.This paper reports on the implementation and shows examples of the use of theProTheRaMonframework for simulating the delivery of proton therapy treatment plans and range monitoring using positron emission tomography (PET).ProTheRaMonoffers complete processing of proton therapy treatment plans, patient CT geometries, and intra-treatment PET imaging, taking into account therapy and imaging coordinate systems and activity decay during the PET imaging protocol specific to a given proton therapy facility. We present theProTheRaMonframework and illustrate its potential use case and data processing steps for a patient treated at the Cyclotron Centre Bronowice (CCB) proton therapy center in Krakow, Poland.Approach.TheProTheRaMonframework is based on GATE Monte Carlo software, theCASToRreconstruction package and in-house developed Python and bash scripts. The framework consists of five separated simulation and data processing steps, that can be further optimized according to the user’s needs and specific settings of a given proton therapy facility and PET scanner design.Main results.ProTheRaMonis presented using example data from a patient treated at CCB and the J-PET scanner to demonstrate the application of the framework for proton therapy range monitoring. The output of each simulation and data processing stage is described and visualized.Significance.We demonstrate that theProTheRaMonsimulation platform is a high-performance tool, capable of running on a computational cluster and suitable for multi-parameter studies, with databases consisting of large number of patients, as well as different PET scanner geometries and settings for range monitoring in a clinical environment. Due to its modular structure, theProTheRaMonframework can be adjusted for different proton therapy centers and/or different PET detector geometries. It is available to the community via github (Boryset al2022).

In vivo assessment of cancer and precise location of altered tissues at initial stages of molecular disorders are important diagnostic challenges. Positronium is copiously formed in the free molecular spaces in the patient's body during positron emission tomography (PET). The positronium properties vary according to the size of inter- and intramolecular voids and the concentration of molecules in them such as, e.g., molecular oxygen, O2; therefore, positronium imaging may provide information about disease progression during the initial stages of molecular alterations. Current PET systems do not allow acquisition of positronium images. This study presents a new method that enables positronium imaging by simultaneous registration of annihilation photons and deexcitation photons from pharmaceuticals labeled with radionuclides. The first positronium imaging of a phantom built from cardiac myxoma and adipose tissue is demonstrated. It is anticipated that positronium imaging will substantially enhance the specificity of PET diagnostics., 10 pages, 5 figures

In this paper the technological aspects of the FAZIA array will be explored. After a productive commissioning phase, FAZIA blocks started to measure and give very useful data to explore the physics of Fermi energy heavy-ion reactions. This was possible thanks to many technical measures and innovations developed in the commissioning phase and tuned during the first experimental campaigns. This paper gives a detailed description of the present status of the FAZIA setup from the electronic and mechanical point of view, trying also to trace a path for new improvements and refinements of the apparatus., 17 pages, 9 figures

Rationale The main feature of the fragmentation of [M - H]- ions of methoxylated flavonoids is the loss of methyl radical (formation of the [M - H - CH3 ]-• product ion). Subsequent decomposition of [M - H - CH3 ]-• product ions may be useful for identification of a given compound by HPLC/MS. This paper describes how the selected diagnostic fragment ions can be useful during HPLC/MS(-) analysis of methoxylated flavonoids. Methods Product ion spectra (ESI-CID-MS/MS spectra) of [M - H]- ions of 17 methoxylated flavonoids (flavones, isoflavones and flavonols) were obtained with a Q-TOF mass spectrometer. Full scan mass spectra (ESI-MS) were obtained with a single quadrupole type of instrument. Results A number of product ions were recognized as useful from the point of view of structural elucidation. In most cases they were diagnostic product ions, formed as a result of C ring breaking. Conclusions The most important conclusions drawn from this study are: the product ion at m/z 132 indicates that the analysed compound is an isoflavone; the product ion at m/z 117 indicates the presence of one hydroxy group at ring B or at the 3-position; biochanin A and prunetin can be differentiated by their 'in-source' fragmentation, by the relative abundances of product ions at m/z 195, 183 and 167; loss of mass 102 from the [M - H - CH3 ]-• ion indicates that ring B is not substituted and there is no hydroxy group at the 3-position; and rhamnetin can be detected using three diagnostic product ions, namely at m/z 121, 165 and 193.

Charged lepton system symmetry under combined charge, parity, and time-reversal transformation (CPT) remains scarcely tested. Despite stringent quantum-electrodynamic limits, discrepancies in predictions for the electron–positron bound state (positronium atom) motivate further investigation, including fundamental symmetry tests. While CPT noninvariance effects could be manifested in non-vanishing angular correlations between final-state photons and spin of annihilating positronium, measurements were previously limited by knowledge of the latter. Here, we demonstrate tomographic reconstruction techniques applied to three-photon annihilations of ortho-positronium atoms to estimate their spin polarisation without magnetic field or polarised positronium source. We use a plastic-scintillator-based positron-emission-tomography scanner as a high-acceptance photon detector to study CPT-prohibited angular correlation in ortho-positronium (o-Ps) annihilations. We record an unprecedented range of kinematical configurations of o-Ps annihilations into three photons. Tomographic reconstruction of the annihilation points in a large medium allows single-event estimation of positronium spin orientation and, consequently, determination of the complete spectrum of angular correlation between the annihilation plane orientation and positronium spin, the non-vanishing expectation value of which would manifest CPT-violating effects. We find no violation at the precision level of 10^{−4}, with a fourfold improvement on the previous measurement. This work enables application of positronium-imaging techniques to study discrete symmetries in positronium decays.

Molecular dynamics (MD) simulations provide a physics-based approach to understanding protein structure and dynamics. Here, we used this intriguing tool to validate the experimental structural model of Hyp-1, a pathogenesis-related class 10 (PR-10) protein from the medicinal herb Hypericum perforatum, with potential application in various pharmaceutical therapies. A nanosecond MD simulation using the all-atom optimized potentials for liquid simulations (OPLS&ndash, AA) force field was performed to reveal that experimental atomic displacement parameters (ADPs) underestimate their values calculated from the simulation. The average structure factors obtained from the simulation confirmed to some extent the relatively high compliance of experimental and simulated Hyp-1 models. We found, however, many outliers between the experimental and simulated side-chain conformations within the Hyp-1 model, which prompted us to propose more reasonable energetically preferred rotameric forms. Therefore, we confirmed that MD simulation may be applicable for the verification of refined, experimental models and the explanation of their structural intricacies.

Charged lepton system symmetry under combined charge, parity, and time-reversal transformation (CPT) remains scarcely tested. Despite stringent quantum-electrodynamic limits, discrepancies in predictions for the electron-positron bound state (positronium atom) motivate further investigation, including fundamental symmetry tests. While CPT noninvariance effects could be manifested in non-vanishing angular correlations between final-state photons and spin of annihilating positronium, measurements were previously limited by knowledge of the latter. Here, we demonstrate tomographic reconstruction techniques applied to three-photon annihilations of ortho-positronium atoms to estimate their spin polarisation without magnetic field or polarised positronium source. We use a plastic-scintillator-based positron-emission-tomography scanner to record ortho-positronium (o-Ps) annihilations with single-event estimation of o-Ps spin and determine the complete spectrum of an angular correlation operator sensitive to CPT-violating effects. We find no violation at the precision level of 10^{-4}, with an over threefold improvement on the previous measurement., Comment: This is a preprint of an article published in Nature Communications. The final version is available at https://rdcu.be/cCQqq

Experimental results concerning the dynamical fission of quasiprojectiles in semiperipheral collisions for the system Kr80+Ca48 at 35 MeV/nucleon are presented. Data have been collected with four blocks of the FAZIA setup in the first physics experiment of the FAZIA Collaboration. The degree of isospin equilibration between the two fission fragments and its dependence on their charge asymmetry is investigated. The data are compared with the results of the AMD model coupled to GEMINI as an afterburner, in order to get hints about the timescale of the process.

The FAZIA apparatus is a new detector designed for the Fermi energy domain for charged particles based on three stages telescopes: Silicon detector (300 μm thick), Silicon detector (500 μm thick) and CsI(Tl) (10 cm). Using the ΔE-E technique and the Pulse Shape Analysis (PSA) it permits the charge and mass discrimination up to more than Z=20. In the following, some details about the FAZIA detectors and electronics, their performance and the frst experimental campaigns already performed will be discussed.

In this article, a new method for the reconstruction of hit-position and hit-time of photons in long scintillator detectors is investigated. This article is motivated by the recent development of the positron emission tomography scanners based on plastic scintillators. The proposed method constitutes a new way of signal processing in multivoltage-technique. It is based on the determination of the degree of similarity between the registered signals and the synchronized model signals stored in a library. The library was established for a set of well-defined hit-positions along the length of the scintillator. The Mahalanobis distance was used as a measure of similarity between the two compared signals. The method was validated on the experimental data measured using two-strips J-PET prototype with dimensions of $5\times 9\times 300$ mm3. The obtained time-of-flight (TOF) and spatial resolutions amount to 325 ps (FWHM) and 25 mm (FWHM), respectively. The TOF resolution was also compared to the results of an analogous study done using the linear fitting method. The best TOF resolution was obtained with this method at four predefined threshold levels which was comparable to the resolution achieved from the Mahalanobis distance at two predefined threshold levels. Although the algorithm of the linear fitting method is much simpler to apply than the Mahalanobis method, the application of the Mahalanobis distance requires a lower number of applied threshold levels and, hence, decreases the costs of electronics used in PET scanner.

An effective way for the investigation of nuclear matter under the extreme conditions of high density and temperature is the study of nuclear fragmentation, realized in intermediate-energy heavy-ion collisions. The potential energy accumulated in the compression zone of the collision is converted into collective flow of matter in the later stages of the reaction. During the expansion of the system, fragments are formed in a clusterization process. In the final stage of the reaction, the fragments are moving along Coulomb trajectories and may deexcite by particle emission or secondary break-up.In order to verify the influence of the collective energy on the experimental energy spectra and extract quantitative information on the thermal and collective components, a model simulation was developed. In this procedure, the evolution of the disintegrating system in a multifragmentation process was described after the freeze-out stage with a Monte-Carlo approach. A reconstruction procedure for the fragment kinetic energies has shown the possibility to obtain the thermal and collective components from measured fragment spectra. In the present work, we scrutinize the model simulation for the evolution of the disintegrating system by testing the sensitivity of the collective expansion energy extraction on the model assumptions concerning the freeze-out characteristics, such as the size and shape of the freeze-out volume. Furthermore, thermal aspects of the early stage of the expansion are tested with an examination of the relationship between the assumption of the degree of thermalization of the emitting source and the extracted value of the collective energy.

The J-PET tomograph is constructed from plastic scintillator strips arranged axially in concentric cylindrical layers. It enables investigations of positronium decays by measurement of the time, position, polarization and energy deposited by photons in the scintillators, in contrast to studies conducted so far with crystal and semiconductor based detection systems where the key selection of events is based on the measurement of the photons energies. In this article we show that the J-PET tomograph system is capable of exclusive measurements of the decays of ortho-positronium atoms. We present the first positronium production results, its lifetime distribution measurements and discuss estimation of the influence of various background sources. The tomograph s performance demonstrated here makes it suitable for precision studies of positronium decays including entanglement of the final state photons, positron annihilation lifetime spectroscopy plus molecular imaging diagnostics., 12 pages, 7 figures

The Jagiellonian Positron Emission Tomograph (J-PET) project carried out in the Institute of Physics of the Jagiellonian University is focused on construction and tests of the first prototype of PET scanner for medical diagnostic which allows for the simultaneous 3D imaging of the whole human body using organic scintillators. The J-PET prototype consists of 192 scintillator strips forming three cylindrical layers which are optimized for the detection of photons from the electron-positron annihilation with high time- and high angular-resolutions. In this article we present time calibration and synchronization of the whole J-PET detection system by irradiating each single detection module with a 22Na source and a small detector providing common reference time for synchronization of all the modules., Accepted to publish in Acta Phys. Pol. A

Fully hydrogenated and partially deuterated free standing films of polyaniline doped with (±) camphorsulfonic acid (PANIh5/CSA and PANId4/CSA) are subjected to neutron diffraction study. Obtained results are analyzed and compared with X-ray diffraction measurements. The very distinct differences observed between the two neutron diffraction profiles are described in detail. Making use of the recently published new model of the crystalline structure of the PANI/CSA system, the neutron diffraction curves for the analogous structures are calculated. The two calculated neutron diffraction patterns exhibit similar differences as those obtained in experiment. This fully confirms the validity of the refined molecular model elaborated for this still important material for applications as synthetic metals or organic thermoelectrics.

This paper presents results of tests on polyurethane to timber joints, made of flexible adhesives, causing reduction of stress concentrations and redistribution of them over larger bonding area. The carried out tests on timber elements, polymers and constructed polymer flexible joints with timber elements resulted in promising ability of the joint to transfer compressive, tensile and shear stresses. Two kinds of polyurethanes of different stiffness were tested statically and cyclically. The obtained results indicate that the tested flexible adhesives can give advantages when are applied in repair of historical timber structures.

This work reports on a new reconstruction algorithm allowing to reconstruct the decays of ortho-positronium atoms into three photons using the places and times of photons recorded in the detector. The method is based on trilateration and allows for a simultaneous reconstruction of both location and time of the decay. Results of resolution tests of the new reconstruction in the J-PET detector based on Monte Carlo simulations are presented, which yield a spatial resolution at the level of 2 cm (FWHM) for X and Y and at the level of 1 cm (FWHM) for Z available with the present resolution of J-PET after application of a kinematic fit. Prospects of employment of this method for studying angular correlations of photons in decays of polarized ortho-positronia for the needs of tests of CP and CPT discrete symmetries are also discussed. The new reconstruction method allows for discrimination of background from random three-photon coincidences as well as for application of a novel method for determination of the linear polarization of ortho-positronium atoms, which is also introduced in this work., 18 pages, 5 figures. Accepted for publication in Nuclear Instrumentation and Methods in Physics Research A

Nowadays, in positron emission tomography (PET) systems, a time of flight (TOF) information is used to improve the image reconstruction process. In TOF-PET, fast detectors are able to measure the difference in the arrival time of the two gamma rays, with the precision enabling to shorten significantly a range along the line-of-response (LOR) where the annihilation occurred. In the new concept, called J-PET scanner, gamma rays are detected in plastic scintillators. In a single strip of J-PET system, time values are obtained by probing signals in the amplitude domain. Owing to compressive sensing (CS) theory, information about the shape and amplitude of the signals is recovered. In this paper, we demonstrate that based on the acquired signals parameters, a better signal normalization may be provided in order to improve the TOF resolution. The procedure was tested using large sample of data registered by a dedicated detection setup enabling sampling of signals with 50-ps intervals. Experimental setup provided irradiation of a chosen position in the plastic scintillator strip with annihilation gamma quanta.

The polystyrene dopped with 2,5-diphenyloxazole as a primary fluor and 2-(4-styrylphenyl)benzoxazole as a wavelength shifter, prepared as a plastic scintillator was investigated using positronium probe in wide range of temperatures from 123 to 423 K. Three structural transitions at 260 K, 283 K and 370 K were found in the material. In the o-Ps intensity dependence on temperature, the significant hysteresis is observed. Heated to 370 K, the material exhibits the o-Ps intensity variations in time., Comment: in Nukleonika 2015

The Jagiellonian Positron Emission Tomograph (J-PET) collaboration is developing a prototype time of flight (TOF)-positron emission tomograph (PET) detector based on long polymer scintillators. This novel approach exploits the excellent time properties of the plastic scintillators, which permit very precise time measurements. The very fast field programmable gate array (FPGA)-based front-end electronics and the data acquisition system, as well as low- and high-level reconstruction algorithms were specially developed to be used with the J-PET scanner. The TOF-PET data processing and reconstruction are time and resource demanding operations, especially in the case of a large acceptance detector that works in triggerless data acquisition mode. In this article, we discuss the parallel computing methods applied to optimize the data processing for the J-PET detector. We begin with general concepts of parallel computing and then we discuss several applications of those techniques in the J-PET data processing.

J-PET is a detector optimized for registration of photons from the electron-positron annihilation via plastic scintillators where photons interact predominantly via Compton scattering. Registration of both primary and scattered photons enables to determinate the linear polarization of the primary photon on the event by event basis with a certain probability. Here we present quantitative results on the feasibility of such polarization measurements of photons from the decay of positronium with the J-PET and explore the physical limitations for the resolution of the polarization determination of 511 keV photons via Compton scattering. For scattering angles of about 82 deg (where the best contrast for polarization measurement is theoretically predicted) we find that the single event resolution for the determination of the polarization is about 40 deg (predominantly due to properties of the Compton effect). However, for samples larger than ten thousand events the J-PET is capable of determining relative average polarization of these photons with the precision of about few degrees. The obtained results open new perspectives for studies of various physics phenomena such as quantum entanglement and tests of discrete symmetries in decays of positronium and extend the energy range of polarization measurements by five orders of magnitude beyond the optical wavelength regime., 10 pages, 14 figures, submitted to EPJ C

The main feature of the fragmentation of [M - H]Product ion spectra (ESI-CID-MS/MS spectra) of [M - H]A number of product ions were recognized as useful from the point of view of structural elucidation. In most cases they were diagnostic product ions, formed as a result of C ring breaking.The most important conclusions drawn from this study are: the product ion at m/z 132 indicates that the analysed compound is an isoflavone; the product ion at m/z 117 indicates the presence of one hydroxy group at ring B or at the 3-position; biochanin A and prunetin can be differentiated by their 'in-source' fragmentation, by the relative abundances of product ions at m/z 195, 183 and 167; loss of mass 102 from the [M - H - CH

The Jagiellonian Positron Emission Tomograph (J-PET) is the first PET device built from plastic scintillators. It is a multi-purpose detector designed for medical imaging and for studies of properties of positronium atoms in porous matter and in living organisms. In this article we report on the commissioning of the J-PET detector in view of studies of positronium decays. We present results of analysis of the positron lifetime measured in the porous polymer. The obtained results prove that J-PET is capable of performing simultaneous imaging of the density distribution of annihilation points as well as positron annihilation lifetime spectroscopy., 5 pages, 2 figures

This article reports on the feasibility of testing of the symmetry under reversal in time in a purely leptonic system constituted by positronium atoms using the J-PET detector. The present state of T symmetry tests is discussed with an emphasis on the scarcely explored sector of leptonic systems. Two possible strategies of searching for manifestations of T violation in non-vanishing angular correlations of final state observables in the decays of metastable triplet states of positronium available with J-PET are proposed and discussed. Results of a pilot measurement with J-PET and assessment of its performance in reconstruction of three-photon decays are shown along with an analysis of its impact on the sensitivity of the detector for the determination of T -violation sensitive observables., Comment: 15 pages, 9 figures. Submitted to Advances in High Energy Physics

A new modular and high versatility hodoscope , OSCAR, has been developed and characterized. The aim of this hodoscope is to work as an ancillary detector of present large acceptance heavy ion detectors in specific angular regions where low thresholds and high granularities are needed. We discuss the capabilities of OSCAR in the Δ E–E identification of very low energy light particles, providing a precise map of the thickness uniformity of the Δ E (SSSSD, 20 μ m ) stage and showing how the thickness gradient affects the identification of particles. Energy spectra of light identified particles produced in Ca+Ca collisions at 35 AMeV are used to investigate isospin transport phenomena involving the emission of low energy particles from the quasi-target (QT) source in semi-peripheral nuclear collisions. The possibility to explore particle–particle correlations are also discussed.

The Jagiellonian Positron Emission Tomograph (J-PET) is a novel device being developed at Jagiellonian University in Krakow, Poland based on organic scintillators. J-PET is an axially symmetric (M. Mohammed) has been affiliated to affiliation 6. Please check if correct, otherwise, provide the correct affiliation.and high acceptance scanner that can be used as a multi-purpose detector system. It is well suited to pursue tests of discrete symmetries in decays of positronium in addition to medical imaging. J-PET enables the measurement of both momenta and the polarization vectors of annihilation photons. The latter is a unique feature of the J-PET detector which allows the study of time reversal symmetry violation operator which can be constructed solely from the annihilation photons momenta before and after the scattering in the detector.

Rationale Compounds containing a urea or thiourea moiety form complexes with anions thanks to the ability to form quite strong hydrogen bonds. We have synthesized 1,3-bis(3-(2-pyridylureido)propyl)-1,1,3,3-tetramethyldisiloxane (1). Compound 1 contains two urea moieties connected by a long flexible linker; thus, it should be able to adopt a structure suitable for formation of quite stable complexes with anions. Methods The ability to form complexes of compound 1 with phosphates was tested by electrospray ionization mass spectrometry (ESI-MS). Full scan ESI mass spectra and collision-induced dissociation tandem mass (CID-MS/MS) spectra of the ions of interest were obtained on a quadrupole time-of-flight (QTOF) mass spectrometer. Results It has been found that compound 1 is not only much more prone to form complexes with the phosphate anion than with other inorganic anions, but it is also able to form complexes with organic phosphates, namely nucleotides and phospholipids. However, compound 1 is not able to form complexes with organic compounds not containing a phosphate group (e.g. nucleosides, sugars, glycerolipids). Conclusions Compound 1 can be regarded as selective towards phosphate-containing organic compounds. Formation of such complexes may have some interesting applications for identification of organic phosphates in crude extracts from biological materials. Copyright © 2015 John Wiley & Sons, Ltd.

The J-PET scanner, which allows for single bed imaging of the whole human body, is currently under development at the Jagiellonian University. The dis- cussed detector offers improvement of the Time of Flight (TOF) resolution due to the use of fast plastic scintillators and dedicated electronics allowing for sam- pling in the voltage domain of signals with durations of few nanoseconds. In this paper we show that recovery of the whole signal, based on only a few samples, is possible. In order to do that, we incorporate the training signals into the Tikhonov regularization framework and we perform the Principal Component Analysis decomposition, which is well known for its compaction properties. The method yields a simple closed form analytical solution that does not require iter- ative processing. Moreover, from the Bayes theory the properties of regularized solution, especially its covariance matrix, may be easily derived. This is the key to introduce and prove the formula for calculations of the signal recovery error. In this paper we show that an average recovery error is approximately inversely proportional to the number of acquired samples.

Samples of uterine leiomyomatis and normal tissues taken from patients after surgery were investigated using the Positron Annihilation Lifetime Spectroscopy (PALS). Significant differences in all PALS parameters between normal and diseased tissues were observed. For all studied patients, it was found that the values of the free annihilation and ortho-positronium lifetime are larger for the tumorous tissues than for the healthy ones. For most of the patients, the intensity of the free annihilation and ortho-positronium annihilation was smaller for the tumorous than for the healthy tissues. For the first time, in this kind of studies, the $3\gamma$ fraction of positron annihilation was determined to describe changes in the tissue porosity during morphologic alteration., Comment: Presented at the 2nd Jagiellonian Symposium on Fundamental and Applied Subatomic Physics, Krak\'ow, Poland, June 4-9, 2017

We present a method and preliminary results of the image reconstruction in the Jagiellonian PET tomograph. Using GATE (Geant4 Application for Tomographic Emission), interactions of the 511 keV photons with a cylindrical detector were generated. Pairs of such photons, flying back-to-back, originate from e+e- annihilations inside a 1-mm spherical source. Spatial and temporal coordinates of hits were smeared using experimental resolutions of the detector. We incorporated the algorithm of the 3D Filtered Back Projection, implemented in the STIR and TomoPy software packages, which differ in approximation methods. Consistent results for the Point Spread Functions of ~5/7,mm and ~9/20, mm were obtained, using STIR, for transverse and longitudinal directions, respectively, with no time of flight information included., Presented at the 2nd Jagiellonian Symposium on Fundamental and Applied Subatomic Physics, Krak\'ow, Poland, June 4-9, 2017. To be published in Acta Phys. Pol. B

In this paper we estimate the time resolution of the J-PET scanner built from plastic scintillators. We incorporate the method of signal processing using the Tikhonov regularization framework and the Kernel Density Estimation method. We obtain simple, closed-form analytical formulas for time resolutions. The proposed method is validated using signals registered by means of the single detection unit of the J-PET tomograph built out from 30 cm long plastic scintillator strip. It is shown that the experimental and theoretical results, obtained for the J-PET scanner equipped with vacuum tube photomultipliers, are consistent., 25 pages, 11 figures

International audience; This article presents a new semi-automatic method for charge and mass identification of charged nuclear fragments using either ∆E − E correlations between measured energy losses in two successive detectors or correlations between charge signal amplitude and rise time in a single silicon detector, derived from digital pulse shape analysis techniques. In both cases different nuclear species (defined by their atomic number Z and mass number A) can be visually identified from such correlations if they are presented as a two-dimensional histogram (’identification matrix’), in which case correlations for different species populate different ridge lines (’identification lines’) in the matrix. The proposed algorithm is based on the identification matrix’s properties and uses as little information as possible on the global form of the identification lines, making it applicable to a large variety of matrices. Particular attention has been paid to the implementation in a suitable graphical environment, so that only two mouse-clicks are required from the user to calculate all initialization parameters. Example applications to recent data from both INDRA and FAZIA telescopes are presented.

International audience; The FAZIA apparatus exploits Pulse Shape Analysis (PSA) to identify nuclear fragments stopped in the first layer of a Silicon-Silicon-CsI(Tl) detector telescope. In this work, for the first time, we show that the isotopes of fragments having atomic number as high as Z∼20 can be identified. Such a remarkable result has been obtained thanks to a careful construction of the Si detectors and to the use of low noise and high performance digitizing electronics. Moreover, optimized PSA algorithms are needed. This work deals with the choice of the best algorithm for PSA of current signals. A smoothing spline algorithm is demonstrated to give optimal results without requiring too much computational resources.

In this article it is presented an FPGA based $M$ulti-$V$oltage $T$hreshold (MVT) system which allows of sampling fast signals ($1-2$ ns rising and falling edge) in both voltage and time domain. It is possible to achieve a precision of time measurement of $20$ ps RMS and reconstruct charge of signals, using a simple approach, with deviation from real value smaller than 10$\%$. Utilization of the differential inputs of an FPGA chip as comparators together with an implementation of a TDC inside an FPGA allowed us to achieve a compact multi-channel system characterized by low power consumption and low production costs. This paper describes realization and functioning of the system comprising 192-channel TDC board and a four mezzanine cards which split incoming signals and discriminate them. The boards have been used to validate a newly developed Time-of-Flight Positron Emission Tomography system based on plastic scintillators. The achieved full system time resolution of $\sigma$(TOF) $\approx 68$ ps is by factor of two better with respect to the current TOF-PET systems., Comment: Accepted for publication in JINST, 10 pages, 8 figures

The Jagiellonian Positron Emission Tomograph (J-PET) is a detector for medical imaging of the whole human body as well as for physics studies involving detection of electron-positron annihilation into photons. J-PET has high angular and time resolution and allows for measurement of spin of the positronium and the momenta and polarization vectors of annihilation quanta. In this article, we present the potential of the J-PET system for background rejection in the decays of positronium atoms., Presented at the 2nd Jagiellonian Symposium on Fundamental and Applied Subatomic Physics, Krak\'ow, Poland, June 4-9, 2017. To be published in Acta Phys. Pol. B