Search

Localized oxidation and corrosion behavior of a nickel-titanium (NiTi) shape memory alloy (SMA) was investigated via static immersion experiments in a simulated body fluid solution. Detailed electron microscopy examinations on the sample surfaces revealed preferential formation of local oxide particles around dislocation networks, which constitute high-energy zones. Moreover, various intermediate phases were detected in addition to the parent NiTi phase around dislocation networks. These are also areas with enhanced diffusion, which promotes Ni release. These findings emphasize the significant role of fine microstructural features, such as dislocation networks, on the oxidation and Ni release, and thus, the biocompatibility of the NiTi SMAs. [ABSTRACT FROM AUTHOR]

The current study focused on doping of hydroxyapatite (HA) with constant yttrium (Y3+) and varying fluoride (F−) compositions to investigate its microstructure, microhardness, and biocompatibility. HA was synthesized by precipitation method and sintered at 1100°C for 1 h. Y3+ and F− ion dopings resulted in changes in densities. In x-ray diffraction analysis, no secondary phase formation was observed. Lattice parameters decreased upon ion substitutions. Scanning electron microscopy (SEM) results showed that ion addition resulted in smaller grains. In Fourier transform infrared spectroscopy analysis, F− ion substitution was confirmed. HA doped with 2.5% Y3+ and 1% F− exhibited the highest microhardness. Y3+ and F− ions improved Saos-2 cell proliferation on discs in Methylthiazolyldiphenyl-tetrazolium (MTT) assay. In SEM analysis, cells attached and proliferated on all disc surfaces. Alkaline phosphatase (ALP) assay showed that cell differentiation on the discs was improved by doping HA with an optimum F− amount. Dissolution tests revealed that structural stability of HA was improved with F− ion incorporation. The dissolution behavior of fluoridated samples exhibited a parallel pattern with the cell proliferation and differentiation behavior on these samples. Overall, this work shows that fluoride and yttrium cosubstitution into HA HA2.5Y1F was the most promising material for biomedical applications. © 2010 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2011. [ABSTRACT FROM AUTHOR]

The relationship between cell viability and adhesion behavior, and micro-deformation mechanisms was investigated on austenitic 316L stainless steel samples, which were subjected to different amounts of plastic strains (5%, 15%, 25%, 35% and 60%) to promote a variety in the slip and twin activities in the microstructure. Confocal laser scanning microscopy (CLSM) and field emission scanning electron microscopy (FESEM) revealed that cells most favored the samples with the largest plastic deformation, such that they spread more and formed significant filopodial extensions. Specifically, brain tumor cells seeded on the 35% deformed samples exhibited the best adhesion performance, where a significant slip activity was prevalent, accompanied by considerable slip-twin interactions. Furthermore, maximum viability was exhibited by the cells seeded on the 60% deformed samples, which were particularly designed in a specific geometry that could endure greater strain values. Overall, the current findings open a new venue for the production of metallic implants with enhanced biocompatibility, such that the adhesion and viability of the cells surrounding an implant can be optimized by tailoring the surface relief of the material, which is dictated by the micro-deformation mechanism activities facilitated by plastic deformation imposed by machining., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Effects of intraoral environment on the surface degradation of nickel-titanium (NiTi) shape memory alloy orthodontic wires was simulated through ex situ static immersion experiments in artificial saliva. The tested wires were compared to companion wires retrieved from patients in terms of chemical changes and formation of new structures on the surface. Results of the ex situ experiments revealed that the acidic erosion effective at the earlier stages of immersion led to the formation of new structures as the immersion period approached 30 days. Moreover, comparison of these results with the analysis of wires utilized in clinical treatment evidenced that ex situ experiments are reliable in terms predicting C-rich structure formation on the wire surfaces. However, the formation of C pileups at the contact sites of arch wires and brackets could not be simulated with the aid of static immersion experiments, warranting the simulation of the intraoral environment in terms of both chemical and physical conditions, including mechanical loading, when evaluating the biocompatibility of NiTi orthodontic arch wires., (Copyright © 2014 Elsevier B.V. All rights reserved.)

A systematic set of ex-situ experiments were carried out on Nickel-Titanium (NiTi) shape memory alloy (SMA) in order to identify the dependence of its biocompatibility on sample geometry and body location. NiTi samples with three different geometries were immersed into three different fluids simulating different body parts. The changes observed in alloy surface and chemical content of fluids upon immersion experiments designed for four different time periods were analyzed in terms of ion release, oxide layer formation, and chemical composition of the surface layer. The results indicate that both sample geometry and immersion fluid significantly affect the alloy biocompatibility, as evidenced by the passive oxide layer formation on the alloy surface and ion release from the samples. Upon a 30 day immersion period, all three types of NiTi samples exhibited lower ion release than the critical value for clinic applications. However; a significant amount of ion release was detected in the case of gastric fluid, warranting a thorough investigation prior to utility of NiTi in gastrointestinal treatments involving long-time contact with tissue. Furthermore, certain geometries appear to be safer than the others for each fluid, providing a new set of guidelines to follow while designing implants making use of NiTi SMAs to be employed in treatments targeting specific body parts., (Copyright © 2013 Elsevier B.V. All rights reserved.)