Search

We report on circularly polarized Gaussian beam spin angular momenta that can be inverted upon scattering with quadrupole plasmon modes. The conditions for such conversion are met with high-angle collection, dark-field scattering microscopy on spherical plasmonic particles. We further report that silvered nanoporous silica microparticles exhibit a strong nonlinearity in their scattering, specifically a reverse saturated scattering (RSS), when exposed to high laser power densities on the sample of ca. 5 GW/cm 2 . Handedness conversion by these microparticles is only observed at wavelengths tuned to the quadrupole modes. Conversely, the scattering remains linear, and the handedness is unchanged, when the same particles are illuminated with low laser power densities of ca. 10 W/cm 2 . We infer that RSS tuned to the quadrupole modes sufficiently enhances their contribution so that they dominate the high-angle scattering, thereby justifying the light spin inversion. Moreover, the addition of a self-assembled monolayer of ethynylaniline (EA) on the microparticles results in handedness conversion for both low and high incident power, as expected from preferable dipole damping and plasmon mode red shift. This demonstrates that optical nonlinearity in scattering can be exploited for polarization tuning in plasmonic metamaterials., Competing Interests: The authors declare no competing financial interest., (© 2025 The Authors. Published by American Chemical Society.)

Preserving the function of human tendon-derived cells (hTDCs) during cell expansion is a significant challenge in regenerative medicine. In this study, a non-genetic approach is introduced to control the differentiation of hTDCs using a newly developed tympanic bioreactor. The system mimics the functionality of the human tympanic membrane, employing a piezoelectrically tuned acoustic diaphragm made of polyvinylidene fluoride-co-trifluoroethylene and boron nitride nanotubes. The diaphragm is vibrationally actuated to deliver targeted electromechanical stimulation to hTDCs. The results demonstrate that the system effectively maintains the tendon-specific phenotype of hTDCs, even under conditions that typically induce nonspecific differentiation, such as osteogenesis. This stabilization is achieved by modulating integrin-mediated mechanosignaling via ion channel-regulated calcium activity, potentially by TREK-1 and PIEZO1, yet targeted studies are required for confirmation. Finally, the system sustains the activation of key differentiation pathways (bone morphogenetic protein, BMP) while downregulating osteogenesis-associated (mitogen-ctivated protein kinase, MAPK and wingless integrated, WNT) pathways and upregulating Focal Adhesion Kinase (FAK) signaling. This approach offers a finely tunable, dose-dependent control over hTDC differentiation, presenting significant potential for non-genetic approaches in cell therapy, tendon tissue engineering, and the regeneration of other mechanosensitive tissues., (© 2024 The Author(s). Advanced Science published by Wiley‐VCH GmbH.)

Biodielectrics is a subset of biological and/or bioinspired materials that has brought a huge transformation in the advancement of medical science, such as localized drug delivery in cancer therapeutics, health monitoring, bone and nerve repair, tissue engineering and use in other nanoelectromechanical systems (NEMS). While biodielectrics has long been used in the field of electrical insulation for over a century, polar dielectric properties of biological building blocks have not been well understood at the fundamental building block level. In this review article, we provide a brief overview of dielectric properties of biological building blocks and its hierarchical organisations to include polar dielectric properties such as piezo, pyro, and ferroelectricity. This review article also discusses recent trends, scope, and potential applications of these dielectrics in science and technology. We highlight electromechanical properties embedded in rationally designed organic assemblies, and the challenges and opportunities inherent in mapping from molecular amino acid building blocks to macroscopic analogs of biological fibers and tissues, in pursuit of sustainable materials for next-generation technologies., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2024 Barnana, Tofail, Roy, O’Mahony, Hidaši Turiničová, Gregor and ul Haq.)

The diatom's frustule, characterized by its rugged and porous exterior, exhibits a remarkable biomimetic morphology attributable to its highly ordered pores, extensive surface area, and unique architecture. Despite these advantages, the toxicity and nonbiodegradable nature of silica-based organisms pose a significant challenge when attempting to utilize these organisms as nanotopographically functionalized microparticles in the realm of biomedicine. In this study, we addressed this limitation by modulating the chemical composition of diatom microparticles by modulating the active silica metabolic uptake mechanism while maintaining their intricate three-dimensional architecture through calcium incorporation into living diatoms. Here, the diatom Thalassiosira weissflogii was chemically modified to replace its silica composition with a biodegradable calcium template, while simultaneously preserving the unique three-dimensional (3D) frustule structure with hierarchical patterns of pores and nanoscale architectural features, which was evident by the deposition of calcium as calcium carbonate. Calcium hydroxide is incorporated into the exoskeleton through the active mechanism of calcium uptake via a carbon-concentrating mechanism, without altering the microstructure. Our findings suggest that calcium-modified diatoms hold potential as a nature-inspired delivery system for immunotherapy through antibody-specific binding.

Localized heat generation from manganese iron oxide nanoparticles (MIONPs) conjugated with chemotherapeutics under the exposure of an alternating magnetic field (magneto-chemotherapy) can revolutionize targeted breast cancer therapy. On the other hand, the lack of precise control of local temperature and adequate MIONP distribution in laboratory settings using the conventional two-dimensional (2D) cellular models has limited its further translation in tumor sites. Our current study explored advanced 3D in vitro tumor models as a promising alternative to replicate the complete range of tumor characteristics. Specifically, we have focused on investigating the effectiveness of MIONP-based magneto-chemotherapy (MCT) as an anticancer treatment in a 3D breast cancer model. To achieve this, chitosan-coated MIONPs (CS-MIONPs) are synthesized and functionalized with an anticancer drug (doxorubicin) and a tumor-targeting aptamer (AS1411). CS-MIONPs with a crystallite size of 16.88 nm and a specific absorption rate (SAR) of 181.48 W g -1 are reported. In vitro assessment of MCF-7 breast cancer cell lines in 2D and 3D cell cultures demonstrated anticancer activity. In the 2D and 3D cancer models, the MIONP-mediated MCT reduced cancer cell viability to about 71.48% and 92.2%, respectively. On the other hand, MIONP-mediated MCT under an AC magnetic field diminished spheroids' viability to 83.76 ± 2%, being the most promising therapeutic modality against breast cancer.

Brain cancer is one of those few cancers with very high mortality and low five-year survival rate. First and foremost reason for the woes is the difficulty in diagnosing and monitoring the progression of brain tumors both benign and malignant, noninvasively and in real time. This raises a need in this hour for a tool to diagnose the tumors in the earliest possible time frame. On the other hand, Raman spectroscopy which is well-known for its ability to precisely represent the molecular markers available in any sample given, including biological ones, with great sensitivity and specificity. This has led to a number of studies where Raman spectroscopy has been used in brain tumors in various ways. This review article highlights the fundamentals of Raman spectroscopy and its types including conventional Raman, SERS, SORS, SRS, CARS, etc. are used in brain tumors for diagnostics, monitoring, and even theragnostics, collating all the major works in the area. Also, the review explores how Raman spectroscopy can be even more effectively used in theragnostics and the clinical level which would make them a one-stop solution for all brain cancer needs in the future., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

A simple noninvasive measurement method which allows one to determine the trapped charge in a biocompatible hydroxyapatite dielectric is developed. The hydroxyapatite samples are charged by electron beam with energy 30 keV and total irradiated charge ranging from 2 × 10 -9 C to 2 × 10 -7 C . The value of the trapped charge is determined by analyzing the shape change of a liquid droplet hanging from a needle in proximity of the charged sample surface. The shape change of the pendant drop in the field of gravity is commonly utilized in the measurements of the surface free tension (SFT) of liquids. The external electric field leads to a further modification of the droplet shape and to an effective change of the SFT. The change of the SFT as a function of distance between the droplet and sample and the critical distance at which the droplet detaches from the needle are measured for various values of the irradiated charge. These two quantities are also derived theoretically by considering the trapped charge as a single fitting parameter. We can thus determine the trapped charge in two independent noninvasive ways. It is noteworthy that our method is easily implementable into the standard pendant drop setups. As a practical application of the method, a long-term charge stability of the charged hydroxyapatite is demonstrated, thus paving the way toward quantitative studies of its bioactivity in dependence on the value of the trapped charge.

Measurement of the surface free energy (SFE) of a material allows the prediction of its adhesion properties. Materials can have microscale or sub-microscale surface inhomogeneities, engineered or random, which affect the surface macroscopic behaviour. However, quantitative characterization of the SFE at such length scales remains challenging in view of the variety of instruments and techniques available, the poor knowledge of critical variables and parameters during measurements and the need for appropriate contact models to derive the SFE from the measurements. Failure to characterize adhesion correctly may result in defective components or lengthy process optimization costing billions to industry. Conversely, for planar and homogeneous surfaces, contact angle (CA) measurements are standardized and allow for calculating the SFE using for example the Owen-Wendt model, relying only on the properties of the probing liquids. As such, we assessed and report here a method to correlate quantitative measurements of force-distance curves made with an atomic force microscope (AFM) and with silica and polystyrene (PS) colloidal probe pairs, with quantitative CA measurements and CA-derived SFE values. We measured five surfaces (mica, highly oriented pyrolytic graphite, thermally grown silica on silicon, silicon, and silicon with a super-hydrophobic coating), ranging from hydrophilic to super-hydrophobic, and found an excellent classification of the AFM measurements when these are represented by a set of principal components (PCs), and when both silica and PS colloidal probes are considered together. A regression of the PCs onto the CA measurements allows recovery of the SFE at the length scale of the colloidal probes, which is here ca. 1 micron. We found that once the PC-regression model is built, test sets of only ten AFM force-distance curves are sufficient to predict the local SFE with the calibrated silica and PS colloidal probes., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Optimization of manganese-substituted iron oxide nanoferrites having the composition Mn x Fe 1- x Fe 2 O 4 ( x = 0-1) has been achieved by the chemical co-precipitation method. The crystallite size and phase purity were analyzed from X-ray diffraction. With increases in Mn 2+ concentration, the crystallite size varies from 5.78 to 9.94 nm. Transmission electron microscopy (TEM) analysis depicted particle sizes ranging from 10 ± 0.2 to 13 ± 0.2 nm with increasing Mn 2+ substitution. The magnetization ( M s ) value varies significantly with increasing Mn 2+ substitution. The variation in the magnetic properties may be attributed to the substitution of Fe 2+ ions by Mn 2+ ions inducing a change in the superexchange interaction between the A and B sublattices. The self-heating characteristics of Mn x Fe 1- x Fe 2 O 4 ( x = 0-1) nanoparticles (NPs) in an AC magnetic field are evaluated by specific absorption rate (SAR) and intrinsic loss power, both of which are presented with varying NP composition, NP concentration, and field amplitudes. Mn 0.75 Fe 0.25 Fe 2 O 4 exhibited superior induction heating properties in terms of a SAR of 153.76 W/g. This superior value of SAR with an optimized Mn 2+ content is presented in correlation with the cation distribution of Mn 2+ in the A or B position in the Fe 3 O 4 structure and enhancement in magnetic saturation. These optimized Mn 0.75 Fe 0.25 Fe 2 O 4 NPs can be used as a promising candidate for hyperthermia applications., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

Gold nanoparticles (GNPs) possess various interesting plasmonic properties that can provide a variety of diagnostic and therapeutic functionalities for biomedical applications. Compared to other inorganic metal nanoparticles (NPs), GNPs are less toxic and more biocompatible. However, the in vivo toxicity of gold nanoparticles on humans can be significant due to the size effect. This work aims to study the effect of multiple doses of small-size (≈20 nm) GNPs on the vital organs of Wistar rats. The study includes the oxidative stress in vital organs (liver, brain, and kidney) caused by GNPs and histopathology analysis. The rats were given a single caudal injection of NPs dispersed in PBS at 25, 50, 100, and 250 mg/kg of body weight. After sacrifice, both plasma and organs were collected for the determination of oxidant/antioxidant markers and histological studies. Our data show the high sensitivity of oxidative stress parameters to the GNPs in the brain, liver, and kidneys. However, the response to this stress is different between the organs and depends upon the antioxidant defense, where GSH levels control the MDA and PCO levels. Histological alterations are mild at 25, 50, and 100 mg/kg but significant at higher concentrations of 250 mg/kg. Therefore, histological impairments are shown to be dependent on the dose of GNPs. The results contribute to the understanding of oxidative stress and cellular interaction induced by nanoparticles., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

The apparent piezoelectricity of biological materials is not yet fully understood at the molecular level. In particular, dynamic noncovalent interactions, such as host-guest binding, are not included in the classical piezoelectric model, which limits the rational design of eco-friendly piezoelectric supramolecular materials. Here, inspired by the conformation-dependent mechanoresponse of the Piezo channel proteins, we show that guest-host interactions can amplify the electromechanical response of a conformationally mobile peptide metal-organic framework (MOF) based on the endogenous carnosine dipeptide, demonstrating a new type of adaptive piezoelectric supramolecular material. Density functional theory (DFT) predictions validated by piezoresponse force microscopy (PFM) measurements show that directional alignment of the guest molecules in the host carnosine-zinc peptide MOF channel determines the macroscopic electromechanical properties. We produce stable, robust 1.4 V open-circuit voltage under applied force of 25 N with a frequency of 0.1 Hz. Our findings demonstrate that the regulation of host-guest interactions could serve as an efficient method for engineering sustainable peptide-based power generators.

Temporal and spectral behaviors of plasmons determine their ability to enhance the characteristics of metamaterials tailored to a wide range of applications, including electric-field enhancement, hot-electron injection, sensing, as well as polarization and angular momentum manipulation. We report a dark-field (DF) polarimetry experiment on single particles with incident circularly polarized light in which gold nanoparticles scatter with opposite handedness at visible wavelengths. Remarkably, for silvered nanoporous silica microparticles, the handedness conversion occurs at longer visible wavelengths, only after adsorption of molecules on the silver. Finite element analysis (FEA) allows matching the circular polarization (CP) conversion to dominant quadrupolar contributions, determined by the specimen size and complex susceptibility. We hypothesize that the damping accompanying the adsorption of molecules on the nanostructured silver facilitates the CP conversion. These results offer new perspectives in molecule sensing and materials tunability for light polarization conversion and control of light spin angular momentum at submicroscopic scale.

Modelling of needle insertion in soft tissue has developed significant interest in recent years due to its application in robot-assisted minimally invasive surgeries such as biopsies and brachytherapy. However, this type of surgery requires real-time feedback and processing which complex computational models may not be able to provide. In contrast to the existing mechanics-based kinetic models, a simple multilayer tissue model using a Coupled Eulerian Lagrangian based Finite Element method has been developed using the dynamic principle. The model simulates the needle motion for flexible hollow bevel-angled needle (15° and 30°, 22 Gauge) insertion into porcine liver tissue, which includes material parameters obtained from unconfined compression testing of porcine liver tissue. To validate simulation results, needle insertion force and cutting force within porcine liver tissue were compared with corresponding experimental results obtained from a custom-built needle insertion system. For the 15° and 30° bevel-angle needles, the percentage error for cutting force (mean) of each needle compared to computational model, were 18.7% and 11.9% respectively. Varying the needle bevel angle from 30° to 15° results in an increase of the cutting force, but insertion force does not vary among the tested bevel angles. The validation of this computationally efficient multilayer Finite Element model can help engineers to better understand the biomechanical behaviour of medical needle inside soft biological tissue. Ultimately, this multilayer approach can help advance state-of-art clinical applications such as robot-assisted surgery that requires real-time feedback and processing. STATEMENT OF SIGNIFICANCE: The significance of the work is in confirming the effectiveness of multilayer material based finite element (FE) method to model biopsy needle insertion into soft biological porcine liver tissue. A multilayer Coupled Eulerian Lagrangian (CEL) based FE modelling technique allowed testing of heterogeneous, non-linear viscoelastic porcine liver tissue in a system, so direct comparison of needle tissue interaction forces on the intrinsic material (tissue) behaviour could be made. To the best of the authors' knowledge, the present research investigates for the first time modelling of a three dimensional (3D) hollow needle insertion using a multilayer stiffness model of biological tissue using FE based CEL method and presents a comparison of simulation results with experimental data., Competing Interests: Declaration of Competing Interest The authors have declared that no conflict of interests exists., (Copyright © 2021 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Cocrystallization of two or more molecular compounds can dramatically change the physicochemical properties of a functional molecule without the need for chemical modification. For example, coformers can enhance the mechanical stability, processability, and solubility of pharmaceutical compounds to enable better medicines. Here, we demonstrate that amino acid cocrystals can enhance functional electromechanical properties in simple, sustainable materials as exemplified by glycine and sulfamic acid. These coformers crystallize independently in centrosymmetric space groups when they are grown as single-component crystals but form a noncentrosymmetric, electromechanically active ionic cocrystal when they are crystallized together. The piezoelectricity of the cocrystal is characterized using techniques tailored to overcome the challenges associated with measuring the electromechanical properties of soft (organic) crystals. The piezoelectric tensor of the cocrystal is mapped using density functional theory (DFT) computer models, and the predicted single-crystal longitudinal response of 2 pC/N is verified using second-harmonic generation (SHG) and piezoresponse force microscopy (PFM). The experimental measurements are facilitated by polycrystalline film growth that allows for macroscopic and nanoscale quantification of the longitudinal out-of-plane response, which is in the range exploited in piezoelectric technologies made from quartz, aluminum nitride, and zinc oxide. The large-area polycrystalline film retains a damped response of ≥0.2 pC/N, indicating the potential for application of such inexpensive and eco-friendly amino acid-based cocrystal coatings in, for example, autonomous ambient-powered devices in edge computing., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

Tendon disease constitutes an unmet clinical need and remains a critical challenge in the field of orthopaedic surgery. Innovative solutions are required to overcome the limitations of current tendon grafting approaches, and bioelectronic therapies show promise in treating musculoskeletal diseases, accelerating functional recovery through the activation of tissue regeneration-specific signaling pathways. Self-powered bioelectronic devices, particularly piezoelectric materials, represent a paradigm shift in biomedicine, negating the need for battery or external powering and complementing existing mechanotherapy to accelerate the repair processes. Here, the dynamic response of tendon cells to a piezoelectric collagen-analogue scaffold comprised of aligned nanoscale fibers made of the ferroelectric material poly(vinylidene fluoride-co-trifluoroethylene) is shown. It is demonstrated that motion-powered electromechanical stimulation of tendon tissue through piezo-bioelectric device results in ion channel modulation in vitro and regulates specific tissue regeneration signaling pathways. Finally, the potential of the piezo-bioelectronic device in modulating the progression of tendinopathy-associated processes in vivo, using a rat Achilles acute injury model is shown. This study indicates that electromechanical stimulation regulates mechanosensitive ion channel sensitivity and promotes tendon-specific over non-tenogenic tissue repair processes., (© 2021 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Nanostructures that are inaccessible through spontaneous thermodynamic processes may be formed by supramolecular self-assembly under kinetic control. In the past decade, the dynamics of pathway complexity in self-assembly have been elucidated through kinetic models based on aggregate growth by sequential monomer association and dissociation. Immiscible liquid-liquid interfaces are an attractive platform to develop well-ordered self-assembled nanostructures, unattainable in bulk solution, due to the templating interaction of the interface with adsorbed molecules. Here, we report time-resolved in situ UV-vis spectroscopic observations of the self-assembly of zinc(II) meso-tetrakis(4-carboxyphenyl)porphyrin (ZnTPPc) at an immiscible aqueous-organic interface. We show that the kinetically favored metastable J-type nanostructures form quickly, but then transform into stable thermodynamically favored H-type nanostructures. Numerical modeling revealed two parallel and competing cooperative pathways leading to the different porphyrin nanostructures. These insights demonstrate that pathway complexity is not unique to self-assembly processes in bulk solution and is equally valid for interfacial self-assembly. Subsequently, the interfacial electrostatic environment was tuned using a kosmotropic anion (citrate) in order to influence the pathway selection. At high concentrations, interfacial nanostructure formation was forced completely down the kinetically favored pathway, and only J-type nanostructures were obtained. Furthermore, we found by atomic force microscopy and scanning electron microscopy that the J- and H-type nanostructures obtained at low and high citric acid concentrations, respectively, are morphologically distinct, which illustrates the pathway-dependent material properties.

Realization of a self-assembled, nontoxic and eco-friendly piezoelectric device with high-performance, sensitivity and reliability is highly desirable to complement conventional inorganic and polymer based materials. Hierarchically organized natural materials such as collagen have long been posited to exhibit electromechanical properties that could potentially be amplified via molecular engineering to produce technologically relevant piezoelectricity. Here, by using a simple, minimalistic, building block of collagen, we fabricate a peptide-based piezoelectric generator utilising a radically different helical arrangement of Phe-Phe-derived peptide, Pro-Phe-Phe and Hyp-Phe-Phe, based only on proteinogenic amino acids. The simple addition of a hydroxyl group increases the expected piezoelectric response by an order of magnitude (d 35  = 27 pm V -1 ). The value is highest predicted to date in short natural peptides. We demonstrate tripeptide-based power generator that produces stable max current >50 nA and potential >1.2 V. Our results provide a promising device demonstration of computationally-guided molecular engineering of piezoelectricity in peptide nanotechnology.

Magnetic-plasmonic, Fe 3 O 4 -Au, core-shell nanoparticles are popular in many applications, most notably in therapeutics and diagnostics, and thus, the imaging of these nanostructures in biological samples is of high importance. These nanostructures are typically imaged in biological material by dark field scatter imaging, which requires an even distribution of nanostructures in the sample and, therefore, high nanoparticle doses, potentially leading to toxicology issues. Herein, we explore the nonlinear optical properties of magnetic nanoparticles coated with various thicknesses of gold using the open aperture z-scan technique to determine the nonlinear optical properties and moreover, predict the efficacy of the nanostructures in nonlinear imaging. We find that the magnetic nanoparticles coated with gold nanoseeds and thinner gold shells (ca. 4 nm) show the largest nonlinear absorption coefficient β and imaginary part of the third-order susceptibility Im χ (3) , suggesting that these nanostructures would be suitable contrast agents. Next, we combine laser dark field microscopy and epi-detected coherent anti-Stokes Raman (CARS) microscopy to image the uptake of magnetic-plasmonic nanoparticles in human pancreatic cancer cells. We show the epi-detected CARS technique is suitable for imaging of the magnetic-plasmonic nanoparticles without requiring a dense distribution of nanoparticles. This technique achieves superior nanoparticle contrasting over both epi-detected backscatter imaging and transmission dark field imaging, while also attaining label-free chemical contrasting of the cell. Lastly, we show the high biocompatibility of the Fe 3 O 4 nanoparticles with ca. 4-nm thick Au shell at concentrations of 10-100 µg/mL.

The indiscriminate and sporadic use of antibiotics has contributed to the emergence of drug resistance phenomenon in bacteria including but not limited to Staphylococcus aureus. These drug-resistant bacteria have been threatening safety in hospitals and adversely affecting human health. Here we report a strategy to design photo-stimulated theranostic nanoprobes against methicillin-resistant Staphylococcus aureus (MRSA) "superbug" USA300. The nanocapsule probe is based on gold nanorods (GNRs) coated with pegylated thiol, mPEG-SH, which has been further modified by adding successively a natural antibacterial compound such as curcumin, and a cell targeting deoxyribonucleic acid (DNA) aptamer. We have used this novel gold nanocapsules for near-infrared (NIR) photophysical stimulation against pathogenic bacteria. We have found that the novel nanocapsule blocks biofilm formation and kills bacteria by photothermal action that causes disruption of the bacterial cell wall and membrane. In this approach, multiple drug-resistant Staphylococcus aureus has been captured by these nanocapsules through DNA aptamer targeting. All of the trapped bacteria could be killed in 30 minutes during the NIR stimulation due to the combination of photothermal effect, the generation of reactive oxygen species (ROS) and a loss of transmembrane potential (Δψ). Importantly we did not notice any resistance developed against the photothermal treatment. This is remarkable from an anti-biofilm activity point of view. Importantly, these multifunctional nanocapsules have also shown a surface enhanced Raman spectroscopy (SERS) effect, which could be used to evaluate the success of the inactivation effect during treatment. These results indicate that nanocapsule-based photo treatment can be an alternative antibacterial strategy without contributing to antibiotic resistance, and thus can be used for both environmental and therapeutic applications.

Amino acid chirality plays an important role in conveying directionality and specificity to their supramolecular organization. However, the impact of enantiopure and racemic amino acids on the favorable packing and macroscopic properties of organic cocrystals with nonchiral coformers is poorly understood. Herein, we performed a systematic study of the effect of chirality on the macroscopic properties of acetylated alanine (AcA) single crystals and cocrystals with a nonchiral photo-sensitive bipyridine derivative (BPE). Cocrystallization with BPE produced a marked morphology transition that improved the supramolecular chirality, thermal stability and mechanical strength of AcA crystals. The distinct supramolecular packing modes were analyzed by X-ray crystallography. The highest rigidity was observed for BPE/DL-ACA, WHILE BPE/D-ACA AND BPE/L-ACA crystals exhibited higher efficiency of photo-induced emission for fluorescent imprinting, as well as significantly higher piezoelectricity. This work provides a striking illustration that subtle differences in amino acid stereochemistry translate into tunable macroscopic properties of organic cocrystals for future applications in rigid solids, fluorescent imprinting, and energy harvesting., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. Conflict of interest The authors declare no conflict of interest.

Fe 3 O 4 -Au core-shell magnetic-plasmonic nanoparticles are expected to combine both magnetic and light responsivity into a single nanosystem, facilitating combined optical and magnetic-based nanotheranostic (therapeutic and diagnostic) applications, for example, photothermal therapy in conjunction with magnetic resonance imaging (MRI) imaging. To date, the effects of a plasmonic gold shell on an iron oxide nanoparticle core in magnetic-based applications remains largely unexplored. For this study, we quantified the efficacy of magnetic iron oxide cores with various gold shell thicknesses in a number of popular magnetic-based nanotheranostic applications; these included magnetic sorting and targeting (quantifying magnetic manipulability and magnetophoresis), MRI contrasting (quantifying benchtop nuclear magnetic resonance (NMR)-based T 1 and T 2 relaxivity), and magnetic hyperthermia therapy (quantifying alternating magnetic-field heating). We observed a general decrease in magnetic response and efficacy with an increase of the gold shell thickness, and herein we discuss possible reasons for this reduction. The magnetophoresis speed of iron oxide nanoparticles coated with the thickest gold shell tested here (ca. 42 nm) was only ca. 1% of the non-coated bare magnetic nanoparticle, demonstrating reduced magnetic manipulability. The T 1 relaxivity, r 1 , of the thick gold-shelled magnetic particle was ca. 22% of the purely magnetic counterpart, whereas the T 2 relaxivity, r 2 , was 42%, indicating a reduced MRI contrasting. Lastly, the magnetic hyperthermia heating efficiency (intrinsic loss power parameter) was reduced to ca. 14% for the thickest gold shell. For all applications, the efficiency decayed exponentially with increased gold shell thickness; therefore, if the primary application of the nanostructure is magnetic-based, this work suggests that it is preferable to use a thinner gold shell or higher levels of stimuli to compensate for losses associated with the addition of the gold shell. Moreover, as thinner gold shells have better magnetic properties, have previously demonstrated superior optical properties, and are more economical than thick gold shells, it can be said that "less is more".

Background: A thorough understanding of cutting-edge geometry and cutting forces of hollow biopsy needles are required to optimise needle tip design to improve fine needle aspiration procedures., Objectives: To incorporate the dynamics of needle motion in a model for flexible hollow bevel tipped needle insertion into a biological mimetic soft-gel using parameters obtained from experimental work. Additionally, the models will be verified against corresponding needle insertion experiments., Methods: To verify simulation results, needle deflection and insertion forces were compared with corresponding experimental results acquired with an in-house developed needle insertion mechanical system. Additionally, contact stress distribution on needles from agar gel for various time scales were also studied., Results: For the 15°, 30°, 45°, 60° bevel angle needles, and 90° blunt needle, the percentage error in needle deflection of each needle compared to experiments, were 7.3%, 9.9%, 8.6%, 7.8%, and 9.7% respectively. Varying the bevel angle at the needle tip demonstrates that the needle with a lower bevel angle produces the largest deflection, although the insertion force does not vary too much among the tested bevel angles., Conclusion: This experimentally verified computer-based simulation model could be used as an alternative tool for better understanding the needle-tissue interaction to optimise needle tip design towards improved biopsy efficiency., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Second-harmonic generation (SHG) is a nonlinear optical process that can provide disease diagnosis through characterization of biological building blocks such as amino acids, peptides, and proteins. The second-order nonlinear susceptibility tensor χ (2) of a material characterizes its tendency to cause SHG. Here, a method for finding the χ (2) elements from polarization-resolved SHG microscopy in transmission mode is presented. The quantitative framework and analytical approach that corrects for micrometer-scale morphology and birefringence enable the determination and comparison of the SHG susceptibility tensors of β- and γ-phase glycine microneedles. The maximum nonlinear susceptibility coefficients are d 33  = 15 pm V -1 for the β and d 33  = 5.9 pm V -1 for the γ phase. The results demonstrate glycine as a useful biocompatible nonlinear material. This combination of the analytical model and polarization-resolved SHG transmission microscopy is broadly applicable for quantitative SHG material characterization and diagnostic imaging., (© 2020 Wiley-VCH GmbH.)

The ultrasonic visibility of a biopsy needle tip is of critical importance for the success and safety of endoscopic ultrasound (EUS)-guided fine needle aspiration (FNA) procedures. The aim of this study was to design a surface topology, in silico, which enhances the ultrasound visibility of a needle by controlling and optimising the direction of the reflections. Topographic enhancements to needle surface redirect scattered waves back to the transducer to enhance needle visibility, or "echogenicity." Echogenicity enhancement is demonstrated across insonification angles of 30°-90° on full-length scale of biopsy needles used in practice. By applying a textured surface across the full length of the needle surface, the signal being returned to the transducer can be tripled from that of a constant periodic dimple echogenic surface and seven times that of an untextured flat surface. Our first principles model provides a quantitative insight to echogenicity and its enhancement. The model allows in silico design of needles for USG-FNA and biopsy with enhanced echogenicity and consequent improvement in visibility, including but not limited to needle tip area., Competing Interests: Conflict of interest disclosure The authors declare no competing interests., (Copyright © 2020 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.)

Molecular stacking modes, generally classified as H-, J-, and X-aggregation, play a key role in determining the optoelectronic properties of organic crystals. However, the control of stacking transformation of a specific molecule is an unmet challenge, and a priori prediction of the performance in different stacking modes is extraordinarily difficult to achieve. In particular, the existence of hybrid stacking modes and their combined effect on physicochemical properties of molecular crystals are not fully understood. Herein, unexpected stacking transformation from H- to J- and X-aggregation is observed in the crystal structure of a small heterocyclic molecule, 4,4'-bipyridine (4,4'-Bpy), upon coassembly with N -acetyl-l-alanine (AcA), a nonaromatic amino acid derivative. This structural transformation into hybrid stacking mode improves physicochemical properties of the cocrystals, including a large red-shifted emission, enhanced supramolecular chirality, improved thermal stability, and higher mechanical properties. While a single crystal of 4,4'-Bpy shows good optical waveguiding and piezoelectric properties due to the uniform elongated needles and low symmetry of crystal packing, the significantly lower band gap and resistance of the cocrystal indicate improved conductivity. This study not only demonstrates cocrystallization-induced packing transformation between H-, J-, and X-aggregations in the solid state, leading to tunable mechanical and optoelectronic properties, but also will inspire future molecular design of organic functional materials by the coassembly strategy.

To date, various chemically synthesized and biosynthesized nanoparticles, or hybrid nanosystems and/or nanoplatforms, have been developed under the umbrella of nanomedicine. These can be introduced into the body orally, nasally, intratumorally or intravenously. Successfully translating hybrid nanoplatforms from preclinical proof-of-concept to therapeutic value in the clinic is challenging. Having made significant advances with drug delivery technologies, we must learn from other areas of oncology drug development, where patient stratification and target-driven design have improved patient outcomes. This review aims to identify gaps in our understanding of the current strengths of nanomedicine platforms in drug delivery and cancer theranostics. We report on the current approaches of nanomedicine at preclinical and clinical stages., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Diphenylalanine (FF) represents the simplest peptide building block that self-assembles into ordered nanostructures with interesting physical properties. Among self-assembled peptide structures, FF nanotubes display notable stiffness and piezoelectric parameters (Young's modulus = 19-27 GPa, strain coefficient d 33 = 18 pC/N). Yet, inorganic alternatives remain the major materials of choice for many applications due to higher stiffness and piezoelectricity. Here, aiming to broaden the applications of the FF motif in materials chemistry, we designed three phenyl-rich dipeptides based on the β,β-diphenyl-Ala-OH (Dip) unit: Dip-Dip, cyclo-Dip-Dip, and tert -butyloxycarbonyl (Boc)-Dip-Dip. The doubled number of aromatic groups per unit, compared to FF, produced a dense aromatic zipper network with a dramatically improved Young's modulus of ∼70 GPa, which is comparable to aluminum. The piezoelectric strain coefficient d 33 of ∼73 pC/N of such assembly exceeds that of poled polyvinylidene-fluoride (PVDF) polymers and compares well to that of lead zirconium titanate (PZT) thin films and ribbons. The rationally designed π-π assemblies show a voltage coefficient of 2-3 Vm/N, an order of magnitude higher than PVDF, improved thermal stability up to 360 °C (∼60 °C higher than FF), and useful photoluminescence with wide-range excitation-dependent emission in the visible region. Our data demonstrate that aromatic groups improve the rigidity and piezoelectricity of organic self-assembled materials for numerous applications.

We report a significant spectral drift (up to 110 nm) between optical scattering and extinction in magnetite-gold (Fe 3 O 4 -Au) core-shell nanostructures. The drift was observed experimentally using single-particle broadband dark-field scattering microspectroscopy and solution extinction experiments. Infrared thermography demonstrates an enhanced photothermal activity of these nanoparticles at extinction wavelengths that are far drifted from the wavelengths that produce the best results for imaging via scattering. For example, a relatively smooth gold shell leads to 19% more photothermal activity at 532 nm compared to 690 nm whereas a rough-texture, popcorn type morphology gold shell with three times higher drift, is 170% more efficient at 532 nm. We suggest that the enhanced photothermal response results directly from a reduced competition between absorption and scattering as a consequence of the spectral drift. This spectral drift can be advantageous in multimodal theranostics where therapy and imaging are performed independently at different wavelengths.

Elevating and monitoring the temperature of tumors using magnetic nanoparticles (MNPs) still presents a challenge in magnetic hyperthermia therapy. The efficient heating of tumor volume can be achieved by preparing MNPs with high magnetization values. The next-generation approach to magnetic resonance image (MRI)-guided magneto-chemotherapy of cancer based on high-magnetic-moment iron oxide nanoparticles is proposed. The proof of concept is validated by cellular MRI experiments on breast cancer cells. To explore magneto-chemotherapy, we developed high-magnetic-moment iron oxide (Fe 3 O 4 ) nanoparticles (NPs) using base diisopropylamine (DIPA), which plays a dual role as reducing agent and surface stabilizer. Spherical NPs with ∼12 nm size and a high magnetization value of about 92 emu g -1 at room temperature are obtained by this unique method. A high specific absorption rate value of ∼717 wg -1 was obtained for Fe 3 O 4 NPs in water at an alternating magnetic field of 20 kAm -1 and frequency of 267 kHz, which is attributed to the high magnetization value. The magneto-polymeric micelle structure is formed by using Pluronic F127, and anticancer drug doxorubicin is conjugated in the micelle by electrostatic interactions for magneto-chemotherapy. Finally, the magnetic resonance imaging (MRI)-guided magneto-chemotherapy was achieved on breast cancer (MCF7) cells with an overall ∼96% killing of cancer cells attained in 30 min of magneto-chmeotherapy.

Lower back pain is a major global health challenge that can often be caused by degeneration of the Intervertebral Disc (IVD). While IVD biomechanics are a key factor in the degenerative cycle, many mechanotransduction pathways remain unknown, in particular the electro-mechanical coupling in the loaded tissue. However, despite evidence for a role in the mechanically-induced remodelling of similar tissue, piezoelectricity has been overlooked in the IVD. In this study, we investigate the piezoelectric properties of the Annulus Fibrosus (AF) and the Nucleus Pulposus (NP) by measuring the direct piezoelectric effect of mechanically-induced electrical potential change. To verify these findings, we conducted Piezoresponse Force Microscopy (PFM) to measure the inverse effect of electrically-induced deformation. We demonstrate that, for the first time, piezoelectricity is generated throughout the IVD. Piezoelectric effects were greater in the AF than the NP, owing to the organised collagen networks present. However, the piezoresponse found in the NP indicates piezoelectric properties of non-collagenous proteins that have not yet been studied. The voltage generated by longitudinal piezoelectricity in-vivo has been calculated to be ~1 nV locally, indicating that piezoelectric effects may directly affect cell alignment in the AF and may work in conjunction with streaming potentials throughout the IVD. In summary, we have highlighted an intricate electro-mechanical coupling that appears to have distinct physiological roles in the AF and NP. Further study is required to elucidate the cell response and determine the potential role of piezoelectric effects in regeneration and preventative measures from degeneration., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Background: Cellulite is a common physiological condition of dermis, epidermis, and subcutaneous tissues experienced by 85 to 98% of the post-pubertal females in developed countries. Infrared (IR) thermography combined with artificial intelligence (AI)-based automated image processing can detect both early and advanced cellulite stages and open up the possibility of reliable diagnosis. Although the cellulite lesions may have various levels of severity, the quality of life of every woman, both in the physical and emotional sphere, is always an individual concern and therefore requires patient-oriented approach., Objectives: The purpose of this work was to elaborate an objective, fast, and cost-effective method for automatic identification of different stages of cellulite based on IR imaging that may be used for prescreening and personalization of the therapy., Materials and Methods: In this study, we use custom-developed image preprocessing algorithms to automatically select cellulite regions and combine a total of 9 feature extraction methods with 9 different classification algorithms to determine the efficacy of cellulite stage recognition based on thermographic images taken from 212 female volunteers aged between 19 and 22., Results: A combination of histogram of oriented gradients (HOG) and artificial neural network (ANN) enables determination of all stages of cellulite with an average accuracy higher than 80%. For primary stages of cellulite, the average accuracy achieved was more than 90%., Conclusions: The implementation of computer-aided, automatic identification of cellulite severity using infrared imaging is feasible for reliable diagnosis. Such a combination can be used for early diagnosis, as well as monitoring of cellulite progress or therapeutic outcomes in an objective way. IR thermography coupled to AI sets the vision towards their use as an effective tool for complex assessment of cellulite pathogenesis and stratification, which are critical in the implementation of IR thermographic imaging in predictive, preventive, and personalized medicine (PPPM)., Competing Interests: Conflict of interestThe authors declare that they have no conflict of interest., (© The Author(s) 2020.)

Bioinspired assemblies bear massive potential for energy generation and storage. Yet, biological molecules have severe limitations for charge transfer. Here, we report l-tryptophan-d-tryptophan assembling architectures comprising alternating water and peptide layers. The extensive connection of water molecules results in significant dipole-dipole interactions and piezoelectric response that can be further engineered by doping via iodine adsorption or isotope replacement with no change in the chemical composition. This simple system and the new doping strategies supply alternative solutions for enhancing charge transfer in bioinspired supramolecular architectures., Competing Interests: Conflicts of interest There are no conflicts to declare.

Broadband mid-infrared (B-MIR) thermography using fibre optic waveguides can be critical in real-time imaging in harsh environments such as additive manufacturing, personalised medical diagnosis and therapy. We investigate the polarisation effect on thermal measurements through poly-crystalline fibre bundle employing a simple broadband cross-polarisation configuration experimental set-up. Silver halide poly-crystalline fibres AgCl 1-x Br x (0 ≤  x ≤1) (AgClBr-PolyC) have very wide transmission bandwidth spanning over the spectral range from 1 µm up to 31 µm FWHM. Moreover, they are non-toxic, non-hygroscopic, with relatively good flexibility, which make them very adequate for spectroscopic and thermal measurements in medical and clinical fields. In this study, we used a fibre bundle composed of seven single AgClBr-PolyC fibres, each with a core diameter of about 300 µm, inserted between two broadband MIR polarisers. A silicon carbide filament source was placed at the entrance of the fibre bundle, while a FLIR thermal camera with a close-up lens was employed to measure the spatial temperature distribution over the fibre-bundle end. Indeed, polarisation dependence of temperature measurements has been clearly observed in which the orientation of temperature extrema (minima and maxima) vary from one fibre to another within the bundle. Moreover, these observations have enabled the classification of AgClBr-PolyC fibres following their polarisation sensitivities by which some fibres are relatively highly sensitive to polarisation with polarisation temperature difference (PTD) that can reach 22.1 ± 2.8 °C, whereas some others show very low PTD values down to 3.1 ± 2.8 °C. Many applications can readily be found based on the advantages of both extreme cases., (© The Author(s) 2020.)

Cancer cells become resistant over the period to chemotherapeutic drugs and pose a challenging impediment for oncologists in providing effective treatment. Nanomedicine allows to overcome chemoresistance and is the focus of our investigation. Silica nanostructures have been highlighted as an interesting drug delivery platform in vitro and in vivo applications. Here we show the validity of nanomedicine approach for targeted chemotherapeutic cargo delivery to overcome chemoresistance in cancer cells both in vitro and in vivo. For demonstrating the concept, we functionalised ∼100 nm long porous silica nanoparticles (∼20 nm diameter ordered pore structure) by conjugating anticancer drug, cytochrome c enzyme and dual-function anticancer aptamer AS1411 in single supra-assembled nanocargos. The supra-assembly on the porous silica nanostructure allows for a high loading of catalytic enzyme cytochrome c, anticancer drug and aptamer. The silica supra-assembly is characterized by transmission electron microscopy (TEM) and Brunauer-Emmett-Teller (BET) surface area analysis. Conjugation of cargoes has been monitored at each step by UV-vis and Fluorescence spectroscopy. Finally, the constructed supra-assembled nanocarrier tested on chemoresistance colon cancer (HCT116) cells. A pH-responsive, intracellular theranostic cargo delivery has been achieved and the triple action of the nanocargo made an efficient killing of drug resistance colon cancer cells in vitro (∼ 92% cell death) through triplex therapy effects by supressing the P-glycoprotein (P-gp) level. Furthermore, in vivo animal toxicity studies demonstrated, the supra-assembled nanocargos have encouraging safety index to be used in cancer therapy and drug delivery applications., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Progress in nanomedicine has enabled the development of smart hybrid nanostructures (HNSs) for brain cancer theranostics, a novel platform that can diagnose the brain while concurrently beginning primary treatment, initiating secondary treatments where necessary, and monitoring the therapy response. These HNSs can release guest molecules/cargoes directly to brain tumors in response to external physical stimuli. Such physical stimulation is generally referred to as remote stimuli which can be externally applied examples include alternating magnetic field, visible or near-infrared light, ultrasound radiation, X-ray, and radiofrequency. The release of therapeutic cargoes in response to physical stimuli can be performed along with photodynamic therapy, photothermal therapy, phototriggered chemotherapeutics, sonodynamic therapy, electrothermal therapy, and magnetothermal therapy. Herein, we review different HNSs currently used as remotely triggered modalities in brain cancer, such as organic-inorganic HNSs, polymer micelles, and liposomes HNSs. We also summarize underlying mechanisms of remote triggering brain cancer therapeutics including single- and two-photon triggering, thermoresponsive HNSs, photoresponsive HNSs, magnetoresponsive HNSs, and electrically and ultrasound-stimulated HNSs. In addition to a brief synopsis of ongoing research progress on "smart" HNSs-based platforms of novel brain cancer therapeutics, the review offers an up-to-date development in this field for neuro-oncologists, material/nanoscientists, and radiologists so that a rapid clinical impact can be achieved through a convergence of multidisciplinary expertise.

Analysis of the cellular response to piezoelectric materials has been driven by the discovery that many tissue components exhibit piezoelectric behavior ex vivo . In particular, polyvinylidene fluoride and the trifluoroethylene co-polymer (PVDF-TrFE) have been identified as promising piezo and ferroelectric materials with applications in energy harvesting and biosensor devices. Critically, the modulation of the structural and crystalline properties of PVDF-TrFE through annealing processes and the addition of particulate or fibrous fillers has been shown to modulate significantly the materials electromechanical properties. In this study, a PVDF-TrFE/boron-nitride nanotube composite was evaluated by modulated differential scanning calorimetry to assess the effects of boron nitride nanotube addition and thermal annealing on the composite structure and crystal behavior. An increased beta crystal formation [f(β) = 0.71] was observed following PVDF-TrFE annealing at the first crystallization temperature of 120°C. In addition, the inclusion of boron nitride nanotubes significantly increased the crystal formation behavior [f(β) = 0.76] and the mechanical properties of the material. Finally, it was observed that BNNT incorporation enhance the adherence and proliferation of human tenocyte cells in vitro .

Peptide assemblies are ideal components for eco-friendly optoelectronic energy harvesting devices due to their intrinsic biocompatibility, ease of fabrication, and flexible functionalization. However, to date, their practical applications have been limited due to the difficulty in obtaining stable, high-performance devices. Here, it is shown that the tryptophan-based simplest peptide cyclo-glycine-tryptophan (cyclo-GW) forms mechanically robust (elastic modulus up to 24.0 GPa) and thermally stable up to 370 °C monoclinic crystals, due to a supramolecular packing combining dense parallel β-sheet hydrogen bonding and herringbone edge-to-face aromatic interactions. The directional and extensive driving forces further confer unique optical properties, including aggregation-induced blue emission and unusual stable photoluminescence. Moreover, the crystals produce a high and sustained open-circuit voltage (1.2 V) due to a high piezoelectric coefficient of 14.1 pC N -1 . These findings demonstrate the feasibility of utilizing self-assembling peptides for fabrication of biointegrated microdevices that combine high structural stability, tailored optoelectronics, and significant energy harvesting properties., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Single crystal L-amino acids can exhibit technologically useful piezoelectric and nonlinear optical properties. Here we predict, using density functional theory, the piezoelectric charge and strain and voltage tensors of the racemic amino acid DL alanine, and use the modeling data to guide the first macroscopic and nanoscopic piezoelectric measurements on DL-alanine single crystals and polycrystalline aggregates. We demonstrate voltage generation of up to 0.8 V from DL-alanine crystal films under simple manual compression, twice as high as other amino acid crystals. Our results suggest that net molecular chirality is not a prerequisite for piezoelectric behavior in organic crystals. The transducer presented herein demonstrates that DL-alanine crystals can be used in applications such as temperature and force measurement in biosensors, data storage in flexible electronic devices, and mechanical actuation in energy harvesters.

As the industry and commercial market move towards the optimization of printing and additive manufacturing, it becomes important to understand how to obtain the most from the materials while maintaining the ability to print complex geometries effectively. Combining such a manufacturing method with advanced carbon materials, such as Graphene, Carbon Nanotubes, and Carbon fibers, with their mechanical and conductive properties, delivers a cutting-edge combination of low-cost conductive products. Through the process of printing the effectiveness of these properties decreases. Thorough optimization is required to determine the idealized ink functional and flow properties to ensure maximum printability and functionalities offered by carbon nanoforms. The optimization of these properties then is limited by the printability. By determining the physical properties of printability and flow properties of the inks, calculated compromises can be made for the ink design. In this review we have discussed the connection between the rheology of carbon-based inks and the methodologies for maintaining the maximum pristine carbon material properties., Competing Interests: The authors declare no conflict of interest.

Mobile phones have become an indispensable utility to modern society, with international use increasing dramatically each year. The GSM signal operates at 900 MHz, 1800 MHz and 2250 MHz, may potentially cause harm to human tissue. Yet there is no in silico model to aid design these devices to protect from causing potential thermal effect. Here we present a model of sources of heating in a mobile phone device with experimental verification during the phone call. We have developed this mobile phone thermal model using first principles on COMSOL® Multiphysics modelling platform to simulate heating effect in human auricle region due to mobile phone use. In particular, our model considered both radiative and non-radiative heating from components such as the lithium ion battery, CPU circuitry and the antenna. The model showed the distribution and effect of the heating effect due to mobile phone use and considered impact of battery discharge rate, battery capacity, battery cathode material, biological tissue distance, antenna radio-wave frequency and intensity. Furthermore, the lithium ion battery heating was validated during experiments using temperature sensors with an excellent agreement between simulated and experimental data (<1% variation). Mobile phone heating during a typical call has also been simulated and compared with experimental infrared thermographic imaging. Importantly, we found that 1800 MHz frequency of data transmission showed the highest temperature increase in the fat/water phantom used in this simulation. We also successfully compared heating distribution in human auricle region during mobile phone use with clinical thermographic images with reasonable qualitative and quantitative agreements. In summary, our model provides a foundation to conceive thermal and other physical effects caused by mobile phone use and allow for the understanding of potential negative health effects thus supporting and promoting personalized and preventive medicine using thermography., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Titania (TiO 2 ) nanoparticles were surface modified using silica and citrate to implement a 'safe-by-design' approach for managing potential toxicity of titania nanoparticles by controlling surface redox reactivity. DLS and zeta-potential analyses confirmed the surface modification, and electron microscopy and surface area measurements demonstrated nanoscale dimensions of the particles. Electron paramagnetic resonance (EPR) was used to determine the exogenous generation of reactive oxygen species (ROS). All the produced spray dried nanotitania lowered levels of ROS when compared to the corresponding dispersed nanotitania, suggesting that the spray drying process is an appropriate design strategy for the control of nano TiO 2 ROS reactivity. The modification of nanotitania with silica and with citrate resulted in increased levels of ROS generation in exogenous measurements, including photoexcitation for 60 minutes. The dichlorodihydrofluorescein (DCFH) assay of dose-dependent production of oxidative stress, generated by pristine and modified nanotitania in macrophages and alveolar epithelial cells, found no significant change in toxicity originating from the generation of reactive oxygen species. Our findings show that there is no direct correlation between the photocatalytic activity of nanotitania and its oxidative stress-mediated potential toxicity, and it is possible to improve the former, for example adding silica as a modifying agent, without altering the cell redox equilibrium., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Noble-metal nanoparticles size and packing density are critical for sensitive surface-enhanced Raman scattering (SERS) and controlled preparation of such films required to achieve reproducibility. Provided that they are made reliable, Ag shell on SiO 2 microscopic particles (Ag/SiO 2 ) are promising candidates for lab-on-a-bead analytical measurements of low analyte concentration in liquid specimen. Here, we selected nanoporous silica microparticles as a substrate for reduction of AgNO 3 with 3-aminopropyltriethoxysilane (APTES). In a single preparation step, homogeneous and continuous films of Ag nanoparticles are formed on SiO 2 surfaces with equimolar concentration of APTES and silver nitrate in ethanol. It is discussed that amine and silane moieties in APTES contribute first to an efficient reduction on the silica and second to capping the Ag nanoparticles. The high density and homogeneity of nanoparticle nucleation is further regulated by the nanoporosity of the silica. The Ag/SiO 2 microparticles were tested for SERS using self-assembled 4-aminothiophenol monolayers, and an enhancement factor of ca. 2 × 10 6 is measured. Importantly, the SERS relative standard deviation is 36% when a single microparticle is considered and drops to 11% when sets of 10 microparticles are considered. As prepared, the microparticles are highly suitable for state-of-the-art quantitative lab-on-a-bead interrogation of specimens., Competing Interests: The authors declare no competing financial interest.

Fast, label-free optical identification and quantification of biomolecules and other relevant biological materials in microfluidic devices and the vascular system will play a major role in liquid biopsy and related diagnoses. An optical microscope probing simultaneously non-linear coherent anti-Stokes Raman scattering (CARS) and linear scattering (LS) was used to probe microparticles in aqueous solutions flowed unconstrained in microfluidic channels. Despite the optical complexity of these systems, where out-of-focus microparticles randomly impede CARS and LS, and where water CARS generates a substantial background, we demonstrate that in-focus microparticles can be individually and unambiguously detected when CARS and LS are co-analyzed. The ability to chemically discriminate microscale features in optically realistic flows supports the relevance of multimodal CARS platforms for liquid biopsy.

Drug delivery monitoring and tracking in the human body are two of the biggest challenges in targeted therapy to be addressed by nanomedicine. The ability of imaging drugs and micro-/nanoengineered drug carriers and of visualizing their interactions at the cellular interface in a label-free manner is crucial in providing the ability of tracking their cellular pathways and will help understand their biological impact, allowing thus to improve the therapeutic efficacy. We present a fast, label-free technique to achieve high-resolution imaging at the mid-infrared (MIR) spectrum that provides chemical information. Using our custom-made benchtop infrared microscope using a high-repetition-rate pulsed laser (80 MHz, 40 ps), we were able to acquire images with subwavelength resolution (0.8 × λ) at very high speeds. As a proof-of-concept, we embarked on the investigation of nanoengineered polyelectrolyte capsules (NPCs) containing the anticancer drug, docetaxel. These NPCs were synthesized using a layer-by-layer approach built upon a calcium carbonate (CaCO 3 ) core, which was then removed away with ethylenediaminetetraacetic acid. The obtained MIR images show that NPCs are attached to the cell membrane, which is a good step toward an efficient drug delivery. This has been confirmed by both three-dimensional confocal fluorescence and stimulated emission depletion microscopy. Coupled with additional instrumentation and data processing advancements, this setup is capable of video-rate imaging speeds and will be significantly complementing current super-resolution microscopy techniques while providing an unperturbed view into living cells., Competing Interests: The authors declare no competing financial interest.

Piezoelectricity, the linear relationship between stress and induced electrical charge, has attracted recent interest due to its manifestation in biological molecules such as synthetic polypeptides or amino acid crystals, including gamma (γ) glycine. It has also been demonstrated in bone, collagen, elastin and the synthetic bone mineral hydroxyapatite. Piezoelectric coefficients exhibited by these biological materials are generally low, typically in the range of 0.1-10 pm V -1 , limiting technological applications. Guided by quantum mechanical calculations we have measured a high shear piezoelectricity (178 pm V -1 ) in the amino acid crystal beta (β) glycine, which is of similar magnitude to barium titanate or lead zirconate titanate. Our calculations show that the high piezoelectric coefficients originate from an efficient packing of the molecules along certain crystallographic planes and directions. The highest predicted piezoelectric voltage constant for β-glycine crystals is 8 V mN -1 , which is an order of magnitude larger than the voltage generated by any currently used ceramic or polymer.

Recently lots of efforts have been taken to develop superparamagnetic iron oxide nanoparticles (SPIONs) for biomedical applications. So it is utmost necessary to have in depth knowledge of the toxicity occurred by this material. This article is designed in such way that it covers all the associated toxicity issues of SPIONs. It mainly emphasis on toxicity occurred at different levels including cellular alterations in the form of damage to nucleic acids due to oxidative stress and altered cellular response. In addition focus is been devoted for in vitro and in vivo toxicity of SPIONs, so that a better therapeutics can be designed. At the end the time dependent nature of toxicity and its ultimate faith inside the body is being discussed.

The present study has two major purposes: firstly, to investigate whether the analytical model proposed by Jedwab and Clerc for assessing the mechanical behaviour of an open ends metallic braided stent is applicable to the looped ends stent design and secondly, to compare the response of the two stent designs subjected to radial compression. We use finite element analysis to evaluate the performance of the two braided stents emulating well established designs: WALLSTENT and WallFlex. We validate the WALLSTENT model analytically. We perform a radial crimping simulation and evaluate the radial forces and stresses induced. This study confirms the validity of using the analytical model in the biomechanical analysis of the WALLSTENT design. However, in case of the WallFlex design, a major difference in the results can be observed in the levels of radial forces and wire peak stresses, justifying the decision of using a different alloy in the fabrication of the WallFlex design., (Copyright © 2017 Elsevier Ltd. All rights reserved.)