Search

The impact of sea spray aerosol (SSA) on climate depends on the size and chemical composition of individual particles that make up the total SSA ensemble. There remains a lack of understanding as to the composition of individual particles within the SSA ensemble and how it changes in response to dynamic ocean biology. Here, we characterize the classes of organic compounds as well as specific molecules within individual SSA particles. The diversity of molecules within the organic fraction was observed to vary between submicrometer- and supermicrometer-sized particles and included contributions from fatty acids, monosaccharides, polysaccharides, and siliceous material. Significant changes in this molecular diversity were observed to coincide with the rise and fall of phytoplankton and heterotrophic bacteria populations within the seawater. Furthermore, the water uptake of individual particles was affected, as learned from studying the hygroscopicity of model systems composed of representative mixtures of salts and organic compounds.

Enriched iron metabolic features such as high transferrin receptor (TfR) expression and high iron content are commonly observed in aggressive gliomas and can be associated with poor clinical responses. However, the underlying question of how iron contributes to tumor aggression remains elusive. Gliomas harboring isocitrate dehydrogenase (IDH) mutations account for a high percentage (>70 %) of recurrent tumors and cells with an acquired IDH mutation have been reported to have increased motility and invasion. This study aims to investigate how an acquired IDH mutation modulates iron metabolism and the implication(s) of iron on tumor cell growth. IDH mutant cells (U87 R132H ) grow significantly faster which is accompanied with increased TfR expression and iron uptake in vitro compared to wild-type U87 cells. This phenotype is retained in vivo. Biomechanically, U87 R132H cells are significantly less stiff and supplementation with ferrous ammonium sulfate (Fe 2+ ) augments membrane fluidity to drive U87 R132H cells into a super motile state. These findings provide insight into how an acquired IDH mutation may be able to modulate iron metabolism, allowing iron to serve as a biomechanical driver of tumor progression., Competing Interests: Declaration of competing interset The authors declare no conflict of interest., (Copyright © 2024 Elsevier Inc. All rights reserved.)

For surface-enhanced Raman scattering (SERS), reproducible solution-phase results are typically obtained using nanoparticles functionalized with surface-stabilizing molecules that can prevent the adsorption of analyte molecules with surface affinities lower than those of the stabilizing agent. Herein, we investigate the effects of intermolecular interactions between a nonthiolated analyte and cosolvent to facilitate and modulate analyte adsorption to gold nanostars. SERS, extinction spectroscopy, transmission electron microscopy (TEM), and density functional theory (DFT) calculations are employed in this regard. Tetrahydrofuran (THF) is utilized as a cosolvent in water to facilitate the detection of acetylsalicylic acid (aspirin) on anisotropic gold nanoparticles. Intermolecular interactions between the analyte, solvent, and surface are modulated by changing the solution composition to understand how THF facilitates the SERS detection of aspirin in THF-water cosolvents. SERS signals for 5 mM aspirin arise only in the presence of THF at and above 60 mM, while no signal with or without THF below 60 mM is observed. SERS detection of aspirin is hypothesized to depend on THF forming a hydrogen-bonded complex with aspirin that reduces aspirin hydrophobicity, thus stabilizing the acid form of the molecule and allowing it to weakly interact with the gold nanoparticles. The aspirin-THF complex adsorbs to the gold surface through π-orbital overlap between the aromatic ring and gold, where additional THF weakens orbital overlap. Understanding the mechanism by which organic cosolvents facilitate the SERS detection of nonthiolated analytes such as aspirin, in aqueous media, allows other cosolvents, nonthiolated analytes, and other surfaces to obtain a SERS signal in a variety of systems., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Tissue engineered scaffolds aimed at the repair of critical-sized bone defects lack adequate consideration for our aging society. Establishing an effective aged in vitro model that translates to animals is a significant unmet challenge. The in vivo aged environment is complex and highly nuanced, making it difficult to model in the context of bone repair. In this work, 3D nanofibrous scaffolds generated by the thermally-induced self-agglomeration (TISA) technique were functionalized with polydopamine nanoparticles (PD NPs) as a tool to improve drug binding capacity and scavenge reactive oxygen species (ROS), an excessive build-up that dampens the healing process in aged tissues. PD NPs were reduced by ascorbic acid (rPD) to further improve hydrogen peroxide (H 2 O 2 ) scavenging capabilities, where we hypothesized that these functionalized scaffolds could rescue ROS-affected osteoblastic differentiation in vitro and improve new bone formation in an aged mouse model. rPDs demonstrated improved H 2 O 2 scavenging activity compared to neat PD NPs, although both NP groups rescued the alkaline phosphatase activity (ALP) of MC3T3-E1 cells in presence of H 2 O 2 . Additionally, BMP2-induced osteogenic differentiation, both ALP and mineralization, was significantly improved in the presence of PD or rPD NPs on TISA scaffolds. While in vitro data showed favorable results aimed at improving osteogenic differentiation by PD or rPD NPs, in vivo studies did not note similar improvements in ectopic bone formation an aged model, suggesting that further nuance in material design is required to effectively translate to improved in vivo results in aged animal models., (© 2024 The Author(s). Journal of Biomedical Materials Research Part B: Applied Biomaterials published by Wiley Periodicals LLC.)

Variable wind speeds over the ocean can have a significant impact on the formation mechanism and physical-chemical properties of sea spray aerosols (SSA), which in turn influence their climate-relevant impacts. Herein, for the first time, we investigate the effects of wind speed on size-dependent morphology and composition of individual nascent SSA generated from wind-wave interactions of natural seawater within a wind-wave channel as a function of size and their particle-to-particle variability. Filter-based thermal optical analysis, atomic force microscopy (AFM), AFM infrared spectroscopy (AFM-IR), and scanning electron microscopy (SEM) were employed in this regard. This study focuses on SSA with sizes within 0.04-1.8 μm generated at two wind speeds: 10 m/s, representing a wind lull scenario over the ocean, and 19 m/s, indicative of the wind speeds encountered in stormy conditions. Filter-based measurements revealed a reduction of the organic mass fraction as the wind speed increases. AFM imaging at 20% relative humidity of individual SSA identified six main morphologies: prism-like, rounded, core-shell, rod, rod inclusion core-shell, and aggregates. At 10 m/s, most SSA were rounded, while at 19 m/s, core-shells became predominant. Based on AFM-IR, rounded SSA at both wind speeds had similar composition, mainly composed of aliphatic and oxygenated species, whereas the shells of core-shells displayed more oxygenated organics at 19 m/s and more aliphatic organics at 10 m/s. Collectively, our observations can be attributed to the disruption of the sea surface microlayer film structure at higher wind speeds. The findings reveal a significant impact of wind speed on morphology and composition of SSA, which should be accounted for accurate assessment of their climate effects., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Cyclometallated Pt(II) complexes possessing hydrophobic 2-phenylpyridine (ppy) ligands and hydrophilic acetonylacetone (acac) ligands have been investigated for their ability to detect amyloid fibrils via luminescence response. Using hen egg-white lysozyme (HEWL) as a model amyloid protein, Pt(II) complexes featuring benzanilide-substituted ppy ligands and ethylene glycol-functionalized acac ligands demonstrated enhanced luminescence in the presence of HEWL fibrils, whereas Pt(II) complexes lacking complementary hydrophobic/hydrophilic ligand sets displayed little to no emission enhancement. An amphiphilic Pt(II) complex incorporating a bis(ethylene glycol)-derivatized acac ligand was additionally found to trigger restructuring of HEWL fibrils into smaller spherical aggregates. Amphiphilic Pt(II) complexes were generally non-toxic to SH-SY5Y neuroblastoma cells, and several complexes also exhibited enhanced luminescence in the presence of Aβ 42 fibrils associated with Alzheimer's disease. This study demonstrates that easily prepared and robust (ppy)Pt II (acac) complexes show promising reactivity toward amyloid fibrils and represent attractive molecular scaffolds for design of small-molecule probes targeting amyloid assemblies.

Atmospheric aerosols' viscosities can vary significantly depending on their composition, mixing states, relative humidity (RH) and temperature. The diffusion time scale of atmospheric gases into an aerosol is largely governed by its viscosity, which in turn influences heterogeneous chemistry and climate-relevant aerosol effects. Quantifying the viscosity of aerosols in the semisolid phase state is particularly important as they are prevalent in the atmosphere and have a wide range of viscosities. Currently, direct viscosity measurements of submicrometer individual atmospheric aerosols are limited, largely due to the inherent size limitations of existing experimental techniques. Herein, we present a method that utilizes atomic force microscopy (AFM) to directly quantify the viscosity of substrate-deposited individual submicrometer semisolid aerosol particles as a function of RH. The method is based on AFM force spectroscopy measurements coupled with the Kelvin-Voigt viscoelastic model. Using glucose, sucrose, and raffinose as model systems, we demonstrate the accuracy of the AFM method within the viscosity range of ∼10 4 -10 7 Pa s. The method is applicable to individual particles with sizes ranging from tens of nanometers to several micrometers. Furthermore, the method does not require prior knowledge on the composition of studied particles. We anticipate future measurements utilizing the AFM method on atmospheric aerosols at various RH to aid in our understanding of the range of aerosols' viscosities, the extent of particle-to-particle viscosity variability, and how these contribute to the particle diversity observable in the atmosphere.

The effects of atmospheric aging on single-particle nascent sea spray aerosol (nSSA) physicochemical properties, such as morphology, composition, phase state, and water uptake, are important to understanding their impacts on the Earth's climate. The present study investigates these properties by focusing on the aged SSA (size range of 0.1-0.6 μm) and comparing with a similar size range nSSA, both generated at a peak of a phytoplankton bloom during a mesocosm study. The aged SSAs were generated by exposing nSSA to OH radicals with exposures equivalent to 4-5 days of atmospheric aging. Complementary filter-based thermal optical analysis, atomic force microscopy (AFM), and AFM photothermal infrared spectroscopy were utilized. Both nSSA and aged SSA showed an increase in the organic mass fraction with decreasing particle sizes. In addition, aging results in a further increase of the organic mass fraction, which can be attributed to new particle formation and oxidation of volatile organic compounds followed by condensation on pre-existing particles. The results are consistent with single-particle measurements that showed a relative increase in the abundance of aged SSA core-shells with significantly higher organic coating thickness, relative to nSSA. Increased hygroscopicity was observed for aged SSA core-shells, which had more oxygenated organic species. Rounded nSSA and aged SSA had similar hygroscopicity and no apparent changes in the composition. The observed changes in aged SSA physicochemical properties showed a significant size-dependence and particle-to-particle variability. Overall, results showed that the atmospheric aging can significantly influence the nSSA physicochemical properties, thus altering the SSA effects on the climate., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

To elucidate the seawater biological and physicochemical factors driving differences in organic composition between supermicron and submicron sea spray aerosol (SSA super and SSA sub ), carbon isotopic composition (δ 13 C) measurements were performed on size-segregated, nascent SSA collected during a phytoplankton bloom mesocosm experiment. The δ 13 C measurements indicate that SSA super contains a mixture of particulate and dissolved organic material in the bulk seawater. After phytoplankton growth, a greater amount of freshly produced carbon was observed in SSA super with the proportional contribution being modulated by bacterial activity, emphasizing the importance of the microbial loop in controlling the organic composition of SSA super . Conversely, SSA sub exhibited no apparent relationship with biological activity but tracked closely with surface tension measurements probing the topmost ∼0.2-1.5 μm of the sea surface microlayer. This probing depth is similar to a bubble's film thickness at the ocean surface, suggesting that SSA sub organic composition may be influenced by the presence of surfactants at the air-sea interface that are transferred into SSA sub by bubble bursting. Our findings illustrate the substantial impact of seawater dynamics on the pronounced organic compositional differences between SSA super and SSA sub and demonstrate that these two SSA populations should be considered separately when assessing their contribution to marine aerosols and climate.

Conodonts are an extinct group of primitive jawless vertebrates whose elements represent the earliest examples of a mineralized feeding apparatus in vertebrates. Their relative relationship within vertebrates remains unresolved. As teeth, conodont elements are not homologous with the dentition of vertebrates, but they exhibit similarities in mineralization, growth patterns, and function. They clearly represent an early evolutionary experiment in mineralized dentition and offer insight into analogous dentition in other groups. Unfortunately, analysis of functional performance has been limited to a handful of derived morphologies and material properties that may inform ecology and functional analysis are virtually unknown. Here we applied a nanoscale approach to evaluate material properties of conodont bioapatite by utilizing Atomic Force Microscopy (AFM) nanoindentation to determine Young's modulus (E) along multiple elements representing different ontogenetic stages of development in the coniform-bearing apparatus of Dapsilodus obliquicostatus. We observed extreme and systematic variation in E along the length (oral to aboral) of each element that largely mirrors the spatial and ontogenetic variability in the crystalline structure of these specimens. Extreme spatial variability of E likely contributed to breakage of elements that were regularly repaired/regrown in conodonts but later vertebrate dentition strategies that lacked the ability to repair/regrow likely required the development of different material properties to avoid structural failure., (© 2022. The Author(s).)

Marine aerosols strongly influence climate through their interactions with solar radiation and clouds. However, significant questions remain regarding the influences of biological activity and seawater chemistry on the flux, chemical composition, and climate-relevant properties of marine aerosols and gases. Wave channels, a traditional tool of physical oceanography, have been adapted for large-scale ocean-atmosphere mesocosm experiments in the laboratory. These experiments enable the study of aerosols under controlled conditions which isolate the marine system from atmospheric anthropogenic and terrestrial influences. Here, we present an overview of the 2019 Sea Spray Chemistry and Particle Evolution (SeaSCAPE) study, which was conducted in an 11 800 L wave channel which was modified to facilitate atmospheric measurements. The SeaSCAPE campaign sought to determine the influence of biological activity in seawater on the production of primary sea spray aerosols, volatile organic compounds (VOCs), and secondary marine aerosols. Notably, the SeaSCAPE experiment also focused on understanding how photooxidative aging processes transform the composition of marine aerosols. In addition to a broad range of aerosol, gas, and seawater measurements, we present key results which highlight the experimental capabilities during the campaign, including the phytoplankton bloom dynamics, VOC production, and the effects of photochemical aging on aerosol production, morphology, and chemical composition. Additionally, we discuss the modifications made to the wave channel to improve aerosol production and reduce background contamination, as well as subsequent characterization experiments. The SeaSCAPE experiment provides unique insight into the connections between marine biology, atmospheric chemistry, and climate-relevant aerosol properties, and demonstrates how an ocean-atmosphere-interaction facility can be used to isolate and study reactions in the marine atmosphere in the laboratory under more controlled conditions.

Chitosan scaffolds crosslinked by current methods insufficiently meet the demands of bone tissue engineering applications. We developed a novel effective crosslinking technique by using the natural and safe vanillin together with bioglass microparticles to generate an antibacterial, osteoconductive, and mechanically robust 3D porous chitosan-vanillin-bioglass (CVB) scaffold. In addition to the significantly improved mechanical properties, the CVB scaffolds had high porosity (>90%) and interconnected macroporous structures. Our data suggested that the crosslinking mainly resulted from the Schiff base reactions between the aldehydes of vanillin and amines of chitosan, together with the hydrogen and ionic bonds formed within them. Importantly, the CVB scaffolds not only showed good biocompatibility, bioactivity, and strong antibacterial ability but also significantly promoted osteoblastic differentiation, mineralization in vitro, and ectopic bone formation in vivo. Thus, the CVB scaffolds hold great promise for bone tissue engineering applications based on their robust mechanical properties, osteoconductivity, and antibacterial abilities., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

A key regulator of collective cell migrations, which drive development and cancer metastasis, is substrate stiffness. Increased substrate stiffness promotes migration and is controlled by Myosin. Using Drosophila border cell migration as a model of collective cell migration, we identify, for the first time, that the actin bundling protein Fascin limits Myosin activity in vivo. Loss of Fascin results in: increased activated Myosin on the border cells and their substrate, the nurse cells; decreased border cell Myosin dynamics; and increased nurse cell stiffness as measured by atomic force microscopy. Reducing Myosin restores on-time border cell migration in fascin mutant follicles. Further, Fascin's actin bundling activity is required to limit Myosin activation. Surprisingly, we find that Fascin regulates Myosin activity in the border cells to control nurse cell stiffness to promote migration. Thus, these data shift the paradigm from a substrate stiffness-centric model of regulating migration, to uncover that collectively migrating cells play a critical role in controlling the mechanical properties of their substrate in order to promote their own migration. This understudied means of mechanical regulation of migration is likely conserved across contexts and organisms, as Fascin and Myosin are common regulators of cell migration., Competing Interests: ML, CK, TL, SM, YL, AT, TT No competing interests declared, (© 2021, Lamb et al.)

The effects of atmospheric aerosols on the climate and atmosphere of Earth can vary significantly depending upon their properties, including size, morphology, and phase state, all of which are influenced by varying relative humidity (RH) in the atmosphere. A significant fraction of atmospheric aerosols is below 100 nm in size. However, as a result of size limitations of conventional experimental techniques, how the particle-to-particle variability of the phase state of aerosols influences atmospheric processes is poorly understood. To address this issue, the atomic force microscopy (AFM) methodology that was previously established for sub-micrometer aerosols is extended to measure the water uptake and identify the phase state of individual sucrose nanoparticles. Quantified growth factors (GFs) of individual sucrose nanoparticles up to 60% RH were lower than expected values observed on the sub-micrometer sucrose particles. The effect could be attributed to the semisolid sucrose nanoparticle restructuring on a substrate. At RH > 60%, sucrose nanoparticles are liquid and GFs overlap well with the sub-micrometer particles and theoretical predictions. This suggests that quantification of GFs of nanoparticles may be inaccurate for the RH range where particles are semisolid but becomes accurate at elevated RH where particles are liquid. Despite this, however, the identified phase states of the nanoparticles were comparable to their sub-micrometer counterparts. The identified phase transitions between solid and semisolid and between semisolid and liquid for sucrose were at ∼18 and 60% RH, which are equivalent to viscosities of 10 11.2 and 10 2.5 Pa s, respectively. This work demonstrates that measurements of the phase state using AFM are applicable to nanosized particles, even when the substrate alters the shape of semisolid nanoparticles and alters the GF., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

Atmospheric aerosols are suspended particulate matter of varying composition, size, and mixing state. Challenges remain in understanding the impact of aerosols on the climate, atmosphere, and human health. The effect of aerosols depends on their physicochemical properties, such as their hygroscopicity, phase state, and surface tension. These properties are dynamic with respect to the highly variable relative humidity and temperature of the atmosphere. Thus, experimental approaches that permit the measurement of these dynamic properties are required. Such measurements also need to be performed on individual, submicrometer-, and supermicrometer-sized aerosol particles, as individual atmospheric particles from the same source can exhibit great variability in their form and function. In this context, this review focuses on the recent emergence of atomic force microscopy as an experimental tool in physical, analytical, and atmospheric chemistry that enables such measurements. Remaining challenges are noted and suggestions for future studies are offered.

To elucidate the intricate role that the sea surface microlayer (SML) and sea spray aerosols (SSAs) play in climate, understanding the chemical complexity of the SML and how it affects the physical-chemical properties of the microlayer and SSA are important to investigate. While the surface tension of the SML has been studied previously using conventional experimental tools, accurate measurements must be localized to the thickness of the air-liquid interface of the SML. Here we explore the atomic force microscopy (AFM) capabilities to quantify the surface tension of aqueous solution droplets with (sub)micrometer indentation depths into the interface. Sample droplets of hexanoic acid at molar concentrations ranging from 0.1 to 80 mM and SML from a recent wave flume study were investigated. A constant-radius AFM nanoneedle was used to probe ca. 200 μL droplets with 0.3-1.2 μm indentation depths. As a comparison, the surface tension of bulk samples was also measured using a conventional force tensiometer. The data for the hexanoic acid show an excellent overlap between the AFM and force tensiometer surface tension measurements. For the surface tension measurements of the SML, however, the measured values from the AFM were 2.5 mN/m lower than that from the force tensiometer, which was attributed to the structural and chemical complexity of the SML, differences in the probing depth for each method, and the time scale required for the surface film to restructure as the needle is retracted away from the liquid surface. Overall, the study confirmed the accuracy of the AFM method in quantifying the surface tension of aqueous solutions over a wide range of concentrations for surface-active organic compounds. The methodology can be further used to reveal small, yet important, differences in the surface tension of complex air-liquid interfaces such as liquid systems where the type and concentration of surfactants vary with the distance from the air-liquid interface. For such complex systems, AFM measurements of the surface tension as a function of the probing depth and pulling rate may reveal a sublayer film structure of the liquid interface.

The increasing appearance of engineered nanomaterials in broad biomedical and industrial sectors poses an escalating health concern from unintended exposure with unknown consequences. Routine in vitro assessments of nanomaterial toxicity are a vital component to addressing these mounting health concerns; however, despite the known role of cell-cell and cell-matrix contacts in governing cell survival, these physical interactions are generally ignored. Herein, we demonstrate that exposure to amorphous silica particles destabilizes mitochondrial membrane potential, stimulates reactive oxygen species (ROS) production and promotes cytotoxicity in SH-SY5Y human neuroblastoma through mechanisms that are potently matrix dependent, with SH-SY5Y cells plated on the softest matrix displaying a near complete recovery in viability compared to dose-matched cells plated on tissue-culture plastic. Cells on the softest matrix (3 kPa) further displayed a 50% reduction in ROS production and preserved mitochondrial membrane potential. The actin cytoskeleton is mechanosensitive and closely related to ROS production. SH-SY5Y cells exposed to a 100 μg/mL dose of 50 nm silica particles displayed distinct cytoskeletal aberrations and a 70% increase in cell stiffness. Overall, this study establishes that the mechanical environment can significantly impact silica nanoparticle toxicity in SH-SY5Y cells. The mechanobiochemical mechanisms behind this regulation, which are initiated at the cell-matrix interface to adjust cytoskeletal structure and intracellular tension, demand specific attention for a comprehensive understanding of nanotoxicity., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Soft porous nanocrystals with a pronounced shape-memory effect exhibit two- to three-fold increase in elastic modulus compared to the microcrystalline counterpart as determined by atomic force microscopy nanoindentation. The increase in rigidity is consistent with the known shape-memory effect displayed by the framework solid at the nanoscale. Crystal downsizing can offer new avenues for tailoring the mechanical properties of metal-organic frameworks.

The diarylethene derivative, 1,2-bis(2,4-dimethyl-5-phenyl-3-thienyl)perfluorocyclopentene, undergoes a reversible photoisomerization between its ring-open and ring-closed forms in the solid-state and has applications as a photomechanical material. Mechanical properties of macrocrystals, nanowire single crystals, and amorphous films as a function of multiple sequential UV and visible light exposures have been quantified using atomic force microscopy nanoindentation. The isomerization reaction has no effect on the elastic modulus of each solid. But going from the macro- to the nanowire crystal results in a remarkable over 3-fold decrease in the elastic modulus. The macrocrystal and amorphous solids are highly resistant to photomechanical fatigue, while nanowire crystals show clear evidence of photomechanical fatigue attributed to a transition from crystal to amorphous forms. This study provides first experimental evidence of size-dependent photomechanical fatigue in photoreactive molecular crystalline solids and suggests crystal morphology and size must be considered for future photomechanical applications.

Single-molecule studies can reveal the distribution of states and interactions between ligand-enzyme complexes not accessible for most studies that measure a large ensemble average response of many molecules. Furthermore, in some biological applications, the information regarding the outliers, not the average of measured properties, can be more important. The high spatial and force resolution provided by atomic force microscopy (AFM) under physiological conditions has been utilized in this study to quantify the force-distance relations of enzyme-drug interactions. Different immobilization techniques of the protein to a surface and the drug to AFM tip were quantitatively compared to improve the accuracy and precision of the measurement. Protein that is directly bound to the surface, forming a monolayer, was compared to enzyme molecules bound to the surface with rigid double-stranded (ds) DNA spacers. These surfaces immobilization techniques were studied with the drug bound directly to the AFM tip and drug bound via flexible poly(ethylene glycol) and rigid dsDNA linkers. The activity of the enzyme was found to be not significantly altered by immobilization methods relative to its activity in solution. The findings indicate that the approach for studying drug-enzyme interaction based on rigid dsDNA linker on the surface and either flexible or rigid linker on the tip affords straightforward, highly specific, reproducible, and accurate force measurements with a potential for single-molecule level studies. The method could facilitate in-depth examination of a broad spectrum of biological targets and potential drugs.

During pulmonary secondary alveolar septation, the rudimentary distal saccule subdivides by extending tissue sheets into the saccular air space, creating alveoli, which open into the alveolar duct. The sheets originate from saccular mesenchymal cells, which contain α-SMA (αSMA [ACTA2]) and abut elastic fibers (myofibroblasts [MF]), characteristics that are shared by cells that subsequently occupy the secondary septal tips. During elongation, collagen fibers are positioned to provide a scaffold for translocating septal mesenchymal cells. We hypothesized that collagen fibers direct the migration, orientation, and location of MFs during septal elongation. To address this hypothesis, we examined how electrospun collagen fibers direct the migration of fibroblasts bearing targeted deletions of PDGFRα (platelet-derived growth factor receptor-α) or Nrp1 (neuropilin-1), after their isolation from lungs that exhibit reduced secondary septation. We observed that deletion of either gene reduced Rac1 activation and the speed of migration of lung fibroblasts (LF) along electrospun fibers. The deletions did not reduce the proportion of LF that displayed collagen-binding integrins and increased the proportion of LF bearing activated β1-integrin. LF bearing the PDGFRα deletion failed to localize focal adhesions over electrospun fibers, suggesting that they may not appropriately sense and respond to regionally increased stiffness near the fibers. In lungs of mice bearing the PDGFRα deletion, collagen fibers are delocalized from ACTA2-containing MF, and their orientation deviated from the plane of the alveolar walls. Diminished PDGFRα or Nrp1 reduces LF localization to stiffer regions of fibrillar collagen substrates, suggesting that signaling through these receptors enables responsiveness to regional differences in extracellular matrix rigidity.

Aggregated amyloid beta (Aβ) is widely reported to cause neuronal dystrophy and toxicity through multiple pathways: oxidative stress, disrupting calcium homeostasis, and cytoskeletal dysregulation. The neuro-cytoskeleton is a dynamic structure that reorganizes to maintain cell homeostasis in response to varying soluble and physical cues presented from the extracellular matrix (ECM). Due this relationship between cell health and the ECM, we hypothesize that amyloid toxicity may be directly influenced by physical changes to the ECM (stiffness and dimensionality) through mechanosensitive pathways, and while previous studies demonstrated that Aβ can distort focal adhesion signaling with pathological consequences, these studies do not address the physical contribution from a physiologically relevant matrix. To test our hypothesis that physical cues can adjust Aβ toxicity, SH-SY5Y human neuroblastoma and primary human cortical neurons were plated on soft and stiff, 2D polyacrylamide matrices or suspended in 3D collagen gels. Each cell culture was exposed to escalating concentrations of oligomeric or fibrillated Aβ(1-42) with MTS viability and lactate dehydrogenase toxicity assessed. Actin restructuring was further monitored in live cells by atomic force microscopy nanoindentation, and our results demonstrate that increasing either matrix stiffness or exposure to oligomeric Aβ promotes F-actin polymerization and cell stiffening, while mature Aβ fibrils yielded no apparent cell stiffening and minor toxicity. Moreover, the rounded, softer mechanical phenotype displayed by cells plated onto a compliant matrix also demonstrated a resilience to oligomeric Aβ as noted by a significant recovery of viability when compared to same-dosed cells plated on traditional tissue culture plastic. This recovery was reproduced pharmacologically through inhibiting actin polymerization with cytochalasin D prior to Aβ exposure. These studies indicate that the cell-ECM interface can modify amyloid toxicity in neurons and the matrix-mediated pathways that promote this protection may offer unique targets in amyloid pathologies like Alzheimer's disease.

Size engineering is an emerging strategy to modulate the mechanical properties of crystalline materials. Herein, micro- and nanodimensional single crystals of the prototypical metal-organic framework (MOF) ZIF-8 are generated using solvothermal and solution methods, respectively. Atomic force microscopy-based nanoindentation technique was used to measure the Young's modulus values of micro- and nanodimensional individual ZIF-8 crystals. We demonstrate that crystal downsizing to nanoscale dimensions results in a 40% reduction in crystal stiffness. The change is attributed to a greater contribution of surface effects to the physical properties of nanocrystalline ZIF-8. The observed change in the mechanical properties may be used to explain reported size-dependent changes in gas adsorption of ZIF-8, thought to be a result of differences in framework flexibility at the nanoscale. Our work provides an important example on how downsizing of crystalline metal-organic materials can give rise to specific and tunable physical properties.

Depending on the source and relative humidity, aerosols can have different compositional, morphological, and viscoelastic properties. Aerosol studies determining the relationship between these properties and their combined effect on the climate and environment are important. This work aims to correlate the 3D morphology, phase state, and viscoelastic properties of selected single-component chemical systems found in sea spray aerosol (SSA) that were substrate-deposited on a solid surface, studied with atomic force microscopy (AFM). Specifically, two inorganic salts (NaCl and MgSO 4 ), four organic acids (malonic, glutaric, azelaic, and palmitic acids), three saccharides (glucose, sucrose, and raffinose), and lipopolysaccharide from Escherichia coli were studied. Furthermore, three inorganic-organic binary chemical mixtures (NaCl-malonic acid, NaCl-glucose, and MgSO 4 -glucose) at 1:3 and 3:1 mass ratio were studied. AFM imaging and force spectroscopy at 20% relative humidity were performed to record 3D height images of individual particles and measure force-distance plots, respectively. First, by utilizing combined relative indentation depth (RID) and viscoelastic response distance (VRD) data obtained from the force-distance plots, we establish quantitative framework toward differentiation of the solid, semisolid and liquid phase states of individual particles without prior knowledge of their chemical identity. Second, we show that the single particle aspect ratio (AR) of a wide range of compounds relevant to SSA is a measure of the extent of the particle spreading as a result of impaction with the solid substrate, which can be directly related to the RID and VRD results. Thus, we demonstrate that a quick height imaging and determination of a single particle AR can be used to assess the phase state. Therefore, we introduce the ability to semiquantitatively assess the phase states of individual substrate deposited particles of SSA-relevant compounds, irrespective of the microscopy technique used, which can subsequently be further validated by more quantitative AFM force spectroscopy.

Alzheimer's disease (AD), the most common neurodegenerative disorder, is characterized by the extracellular deposition of dense amyloid beta plaques. Emerging evidence suggests that the production of these plaques is initiated by the intracellular uptake and lysosomal preconcentration of the amyloid-beta (Aβ) peptide. All previous endocytosis studies assess Aβ uptake with cells plated on traditional tissue culture plastic; however, brain tissue is distinctly soft with a low-kPa stiffness. Use of an ultrastiff plastic/glass substrate prompts a mechanosensitive response (increased cell spreading, cell stiffness, and membrane tension) that potentially distorts a cell's endocytic behavior from that observed in vivo or in a more physiologically relevant mechanical environment. Our studies demonstrate substrate stiffness significantly modifies the behavior of undifferentiated SH-SY5Y neuroblastoma, where cells plated on soft (∼1 kPa) substrates display a rounded morphology, decreased actin polymerization, reduced adhesion (decreased β 1 integrin expression), and reduced cell stiffness compared to cells plated on tissue culture plastic. Moreover, these neuroblastoma on softer substrates display a preferential increase in the uptake of the Aβ(1-42) compared to Aβ(1-40), while both isoforms display a clear stiffness-dependent increase of uptake relative to cells plated on plastic. Considering the brain is a soft tissue that continues to soften with age, this mechanosensitive endocytosis of Aβ has significant implications for understanding age-related neurodegeneration and the mechanism behind Aβ uptake and fibril production. Overall, identifying these physical factors that contribute to the pathology of AD may offer novel avenues of therapeutic intervention.

The mechanical properties of submicron particles offer a unique design space for advanced drug-delivery particle engineering. However, the recognition of this potential is limited by a poor consensus about both the specificity and sensitivity of mechanosensitive endocytosis over a broad particle stiffness range. In this report, our model series of polystyrene- co -poly( N -isopropylacrylamide) (pS- co -NIPAM) microgels have been prepared with a nominally constant monomer composition (50 mol % styrene and 50 mol % NIPAM) with varied bis-acrylamide cross-linking densities to introduce a tuned spectrum of particle mechanics without significant variation in particle size and surface charge. While previous mechanosensitive studies use particles with moduli ranging from 15 kPa to 20 MPa, the pS- co -NIPAM particles have Young's moduli ( E ) ranging from 300 to 700 MPa, which is drastically stiffer than these previous studies as well as pure pNIPAM. Despite this elevated stiffness, particle uptake in RAW264.7 murine macrophages displays a clear stiffness dependence, with a significant increase in particle uptake for our softest microgels after a 4 h incubation. Preferential uptake of the softest microgel, pS- co -NIPAM-1 ( E = 310 kPa), was similarly observed with nonphagocytic HepG2 hepatoma cells; however, the uptake kinetics were distinct relative to that observed for RAW264.7 cells. Pharmacological inhibitors, used to probe for specific routes of particle internalization, identify actin- and microtubule-dependent pathways in RAW264.7 cells as sensitive particle mechanics. For our pS- co -NIPAM particles at nominally 300-400 nm in size, this microtubule-dependent pathway was interpreted as a phagocytic route. For our high-stiffness microgel series, this study provides evidence of cell-specific, mechanosensitive endocytosis in a distinctly new stiffness regime that will further broaden the functional landscape of mechanics as a design space for particle engineering.

New developments in nanoscale analytical techniques have paved the way for detailed spectroscopic and microscopic measurements of substrate-deposited aerosol particles on a single particle basis. Atomic force microscopy based photothermal infrared (AFM-PTIR) spectroscopy is a technique that combines the nanometer spatial resolution of AFM with the chemical analysis capabilities of vibrational IR spectroscopy. Herein we demonstrate the capability of AFM-PTIR to investigate single and multi-component systems comprised of inorganic salts and organic compounds relevant to the atmosphere. Chemical and microscopic characterization of individual particles as small as 50 nm in diameter is shown. Moreover, single particle spectro-microscopic characterization as a function of relative humidity using this technique is shown for the first time. These new measurements as a function of relative humidity allow for the simultaneous and independent acquisition of photothermal IR spectra, contact resonance frequency shifts, and water uptake growth factors, providing insight on changes in the composition, stiffness, and size of the particles, respectively. These results lay the foundation for more detailed AFM-PTIR studies of multicomponent aerosol particles under a range of environmental conditions.

Currently, the impact of various phase states of aerosols on the climate is not well understood, especially for submicrometer sized aerosol particles that typically have extended lifetime in the atmosphere. This is largely due to the inherent size limitations present in current experimental techniques that aim to directly assess the phase states of fine aerosol particles. Herein we present a technique that uses atomic force microscopy to probe directly for the phase states of individual, submicrometer particles by using nanoindentation and nano-Wilhelmy methodologies as a function of relative humidity (RH) and ambient temperature conditions. When using these methodologies for substrate deposited individual sucrose particles, Young's modulus and surface tension can be quantified as a function of RH. We show that the force profiles collected to measure Young's modulus and surface tension can also provide both qualitative and quantitative assessments of phase states that accompany solid, semisolid, and liquid particle phases. Specifically, we introduce direct measurements of relative indentation depth and viscoelastic response distance on a single particle basis at a given applied force to quantitatively probe for the phase state as a function of RH and corresponding viscosity. Thus, we show that the three phase states and phase state transitions of sucrose can be identified and ultimately propose that this technique may also be used to study other atmospherically relevant systems.

Understanding the role of sea spray aerosol (SSA) on climate and the environment is of great interest due to their high number concentration throughout the Earth's atmosphere. Despite being of fundamental importance, direct surface tension measurements of SSA relevant sub-micrometer particles are rare, largely due to their extremely small volumes. Herein, atomic force microscopy (AFM) is used to directly measure the surface tension of individual sub-micrometer SSA particle mimics at ambient temperature and varying relative humidity (RH). Specifically, we probed both atmospherically relevant and fundamentally important model systems including electrolyte salts, dicarboxylic acids, and saccharides as single components and mixtures. Our results show that the single particle surface tension depends on RH or solute mole percentage and chemical composition. Moreover, for liquid droplets at and below 100 Pa s in viscosity, or at corresponding RH, we show good agreement between the AFM single particle and the bulk solution surface tension measurements at overlapping concentration ranges. Thus, direct surface tension measurements of individual particles using AFM is shown over a wide range of chemical systems as a function of RH, solute mole percentage, and viscosity than previously reported.

Microgel mechanics are central to the swelling of stimuli-responsive materials and furthermore have recently emerged as a novel design space for tuning the uptake of nanotherapeutics. Despite this importance, the techniques available to assess mechanics, at the sub-micron scale, remain limited. In this report, all mechanical moduli for a series of air-dried, polystyrene-co-poly(N-isopropylacrylamide) (pS-co-NIPAM) microgels of varying composition in monomer and crosslinker (N,N'-methylene-bisacrylamide (BIS)) mol% have been determined using Brillouin light scattering (BLS) and AFM nanoindentation. These techniques sample the material through distinct means and provide complementary nanomechanical data. An initial demonstration of this combined approach is used to evaluate size-dependent nanomechanics in pS particles of varying diameter. For the pS-co-NIPAM series, our BLS results demonstrate an increase in Young's (E) and shear moduli with increasing NIPAM and/or BIS mol%, while the Poisson's ratio decreased. The same rank order in E was observed from AFM and the two techniques correlate well. However, at low BIS crosslinking, an inverted particle structure persists and small increases in BIS yield a higher increase in E from AFM relative to BLS, consistent with a higher density at the particle surface. At higher BIS incorporation, the microgel reverts to a typical, dense-core structure and further increasing BIS yields changes to core-particle mechanics reflected in BLS. Lastly, at 75 mol% NIPAM, the microgels displayed a broad volume phase transition and increased crosslinking resulted in a minor, yet unexpected, increase in swelling ratio. This complementary approach offers new insight into nanomechanics critical for microgel design and application.

Individual airborne sea spray aerosol (SSA) particles show diversity in their morphologies and water uptake properties that are highly dependent on the biological, chemical, and physical processes within the sea subsurface and the sea surface microlayer. In this study, hygroscopicity data for model systems of organic compounds of marine origin mixed with NaCl are compared to data for authentic SSA samples collected in an ocean-atmosphere facility providing insights into the SSA particle growth, phase transitions and interactions with water vapor in the atmosphere. In particular, we combine single particle morphology analyses using atomic force microscopy (AFM) with hygroscopic growth measurements in order to provide important insights into particle hygroscopicity and the surface microstructure. For model systems, a range of simple and complex carbohydrates were studied including glucose, maltose, sucrose, laminarin, sodium alginate, and lipopolysaccharides. The measured hygroscopic growth was compared with predictions from the Extended-Aerosol Inorganics Model (E-AIM). It is shown here that the E-AIM model describes well the deliquescence transition and hygroscopic growth at low mass ratios but not as well for high ratios, most likely due to a high organic volume fraction. AFM imaging reveals that the equilibrium morphology of these single-component organic particles is amorphous. When NaCl is mixed with the organics, the particles adopt a core-shell morphology with a cubic NaCl core and the organics forming a shell similar to what is observed for the authentic SSA samples. The observation of such core-shell morphologies is found to be highly dependent on the salt to organic ratio and varies depending on the nature and solubility of the organic component. Additionally, single particle organic volume fraction AFM analysis of NaCl : glucose and NaCl : laminarin mixtures shows that the ratio of salt to organics in solution does not correspond exactly for individual particles - showing diversity within the ensemble of particles produced even for a simple two component system.

Sea spray aerosol (SSA) is a globally important source of particulate matter. A mesocosm study was performed to determine the relative enrichment of saccharides and inorganic ions in nascent fine (PM 2.5 ) and coarse (PM 10-2.5 ) SSA and the sea surface microlayer (SSML) relative to bulk seawater. Saccharides comprise a significant fraction of organic matter in fine and coarse SSA (11 and 27%, respectively). Relative to sodium, individual saccharides were enriched 14-1314-fold in fine SSA, 3-138-fold in coarse SSA, but only up to 1.0-16.2-fold in SSML. Enrichments in SSML were attributed to rising bubbles that scavenge surface-active species from seawater, while further enrichment in fine SSA likely derives from bubble films. Mean enrichment factors for major ions demonstrated significant enrichment in fine SSA for potassium (1.3), magnesium (1.4), and calcium (1.7), likely because of their interactions with organic matter. Consequently, fine SSA develops a salt profile significantly different from that of seawater. Maximal enrichments of saccharides and ions coincided with the second of two phytoplankton blooms, signifying the influence of ocean biology on selective mass transfer across the ocean-air interface.

We developed an electrospun carbon nanofiber-carbon nanotube (CNF-CNT) composite with optimal sorption capacity and material strength for point-of-use (POU) water treatment. Synthesis variables including integration of multiwalled carbon nanotubes (CNTs) and macroporosity (via sublimation of phthalic acid), relative humidity (20 and 40%), and stabilization temperature (250 and 280 °C) were used to control nanofiber diameter and surface area (from electron microscopy and BET isotherms, respectively), surface composition (from XPS), and strength (from AFM nanoindentation and tensile strength tests). Composites were then evaluated using kinetic, isotherm, and pH-edge sorption experiments with sulfamethoxazole (log Kow = 0.89) and atrazine (log Kow = 2.61), representative micropollutants chosen for their different polarities. Although CNFs alone were poor sorbents, integration of CNTs and macroporosity achieved uptake comparable to granular activated carbon. Through reactivity comparisons with CNT dispersions, we propose that increasing macroporosity exposes the embedded CNTs, thereby enabling their role as the primary sorbent in nanofiber composites. Because the highest capacity sorbents lacked sufficient strength, our optimal formulation (polyacrylonitrile 8 wt %, CNT 2 wt %, phthalic acid 2.4 wt %; 40% relative humidity; 280 °C stabilization) represents a compromise between strength and performance. This optimized sorbent was tested with a mixture of ten organic micropollutants at environmentally relevant concentrations in a gravity-fed, flow-through filtration system, where removal trends suggest that both hydrophobic and specific binding interactions contribute to micropollutant uptake. Collectively, this work highlights the promise of CNF-CNT filters (e.g., mechanical strength, ability to harness CNT sorption capacity), while also prioritizing areas for future research and development (e.g., improved removal of highly polar micropollutants, sensitivity to interfering cosolutes).

The water uptake behavior of atmospheric aerosol dictates their climate effects. In many studies, aerosol particles are deposited onto solid substrates to measure water uptake; however, the effects of the substrate are not well understood. Furthermore, in some cases, methods used to analyze and quantify water uptake of substrate deposited particles use a two-dimensional (2D) analysis to monitor growth by following changes in the particle diameter with relative humidity (RH). However, this 2D analysis assumes that the droplet grows equally in all directions. If particle growth is not isotropic in height and diameter, this assumption can cause inaccuracies when quantifying hygroscopic growth factors (GFs), where GF for a for a spherical particle is defined as the ratio of the particle diameter at a particular relative humidity divided by the dry particle diameter (typically about 5% RH). However, as shown here, anisotropic growth can occur in some cases. In these cases, a three-dimensional (3D) analysis of the growth is needed. This study introduces a way to quantify the hygroscopic growth of substrate deposited particles composed of model systems relevant to atmospheric aerosols using atomic force microscopy (AFM), which gives information on both the particle height and area and thus a three-dimensional view of each particle. In this study, we compare GFs of submicrometer sized particles composed of single component sodium chloride (NaCl) and malonic acid (MA), as well as binary mixtures of NaCl and MA, and NaCl and nonanoic acid (NA) determined by AFM using area (2D) equivalent diameters, similar to conventional microscopy methods, to GFs determined using volume (3D) equivalent diameter. We also compare these values to GFs determined by a hygroscopic tandem differential mobility analyzer (HTDMA; substrate free, 3D method). It was found that utilizing volume equivalent diameter for quantifying GFs with AFM agreed well with those determined by substrate-free HTDMA method, regardless of particle composition but area equivalent derived GFs varied for different chemical systems. Furthermore, the NaCl and MA mixture was substrate-deposited both wet and dry, revealing that the hydration state of the particle at the time of impaction influences how the particle grows on the substrate upon water uptake. Most importantly, for the binary mixtures it is shown here that different populations of particles can be distinguished with AFM, an individual particle method, whereas HTDMA sees the ensemble average. Overall, this study establishes the methodology of using AFM to accurately quantify the water uptake of individual submicrometer particles at ambient conditions over a wide range of RH values. Furthermore, the importance of single particle AFM analysis is demonstrated.

Atmospheric aerosols are often collected on substrates and analyzed weeks or months after the initial collection. We investigated how the selection of substrate and microscopy method influence the measured size, phase, and morphology of sea spray aerosol (SSA) particles and how sample storage conditions affect individual particles using three common microscopy techniques: optical microscopy, atomic force microscopy, and scanning electron microscopy. Micro-Raman spectroscopy was used to determine changes in the water content of stored particles. The results show that microscopy techniques operating under ambient conditions provide the most relevant and robust measurement of particle size. Samples stored in a desiccator and at ambient conditions leads to similar sizes and morphologies, while storage that involves freezing and thawing leads to irreversible changes due to phase changes and water condensation. Typically, SSA particles are deposited wet and, if possible, samples used for single-particle analysis should be stored at or near conditions at which they were collected in order to avoid dehydration. However, if samples need to be dry, as is often the case, then this study found that storing SSA particles at ambient laboratory conditions (17-23% RH and 19-21 °C) was effective at preserving them and reducing changes that would alter samples and subsequent data interpretation.

A correlation between Young's modulus, as determined by using nanoindentation atomic force microscopy (AFM), and atomic polarizability is observed for members of a series of cocrystals based on systematic changes to one cocrystal component. Time domain spectroscopy over terahertz frequencies (THz-TDS) is used for the first time to directly measure the polarizability of macro- and nanosized organic solids. Cocrystals of both macro- and nanodimensions with highly polarizable atoms result in softer solids and correspondingly higher polarizabilities.

[This corrects the article DOI: 10.1039/C4SC03716B.].

Methods that directly measure the concentration of surface-immobilized biomolecules are scarce. More commonly, the concentration of the soluble molecule is measured before and after immobilization, and the bound concentration is assessed by elimination, assuming that all bound molecules are active. An assay was developed for measuring the active site concentration, activity, and thereby the catalytic turnover rate (kcat) of an immobilized dihydrofolate reductase as a model system. The new method yielded a similar first-order rate constant, kcat, to that of the same enzyme in solution. The findings indicate that the activity of the immobilized enzyme, when separated from the surface by the DNA spacers, has not been altered. In addition, a new immobilization method that leads to solution-like activity of the enzyme on the surface is described. The approaches developed here for immobilization and for determining the concentration of an immobilized enzyme are general and can be extended to other enzymes, receptors, and antibodies., (Copyright © 2015 Elsevier Inc. All rights reserved.)

Aerosol particles influence global climate by determining cloud droplet number concentrations, brightness, and lifetime. Primary aerosol particles, such as those produced from breaking waves in the ocean, display large particle-particle variability in chemical composition, morphology, and physical phase state, all of which affect the ability of individual particles to accommodate water and grow into cloud droplets. Despite such diversity in molecular composition, there is a paucity of methods available to assess how particle-particle variability in chemistry translates to corresponding differences in aerosol hygroscopicity. Here, an approach has been developed that allows for characterization of the distribution of aerosol hygroscopicity within a chemically complex population of atmospheric particles. This methodology, when applied to the interpretation of nascent sea spray aerosol, provides a quantitative framework for connecting results obtained using molecular mimics generated in the laboratory with chemically complex ambient aerosol. We show that nascent sea spray aerosol, generated in situ in the Atlantic Ocean, displays a broad distribution of particle hygroscopicities, indicative of a correspondingly broad distribution of particle chemical compositions. Molecular mimics of sea spray aerosol organic material were used in the laboratory to assess the volume fractions and molecular functionality required to suppress sea spray aerosol hygroscopicity to the extent indicated by field observations. We show that proper accounting for the distribution and diversity in particle hygroscopicity and composition are important to the assessment of particle impacts on clouds and global climate.

Understanding the interactions of water with atmospheric aerosols is crucial for determining the size, physical state, reactivity, and climate impacts of this important component of the Earth's atmosphere. Here we show that water uptake and hygroscopic growth of multicomponent, atmospherically relevant particles can be size dependent when comparing 100 nm versus ca. 6 μm sized particles. It was determined that particles composed of ammonium sulfate with succinic acid and of a mixture of chlorides typical of the marine environment show size-dependent hygroscopic behavior. Microscopic analysis of the distribution of components within the aerosol particles show that the size dependence is due to differences in the mixing state, that is, whether particles are homogeneously mixed or phase separated, for different sized particles. This morphology-dependent hygroscopicity has consequences for heterogeneous atmospheric chemistry as well as aerosol interactions with electromagnetic radiation and clouds.

Surface tension, an important property of liquids, is easily measured for bulk samples. However, for droplets smaller than one micron in size, there are currently no reported measurements. In this study, atomic force microscopy (AFM) and force spectroscopy have been utilized to measure surface tension of individual submicron sized droplets at ambient pressure and controlled relative humidity (RH). Since the surface tension of atmospheric aerosols is a key factor in understanding aerosol climate effects, three atmospherically relevant systems (NaCl, malonic and glutaric acids) were studied. Single particle AFM measurements were successfully implemented in measuring the surface tension of deliquesced particles on the order of 200 to 500 nm in diameter. Deliquesced particles continuously uptake water at high RH, which changes the concentration and surface tension of the droplets. Therefore, surface tension as a function of RH was measured. AFM based surface tension measurements are close to predicted values based on bulk measurements and activities of these three chemical systems. Non-ideal behaviour in concentrated organic acid droplets is thought to be important and the reason for differences observed between bulk solution predictions and AFM data. Consequently, these measurements are crucial in order to improve atmospheric climate models as direct measurements hitherto have been previously inaccessible due to instrument limitations.

An assay was developed for measuring the active-site concentration, activity, and thereby the catalytic turnover rate (k cat) of an immobilized dihydrofolate reductase model system (Singh et al., (2015), Anal. Biochem). This data article contains a calibration plot for the developed assay. In the calibration plot rate is plotted as a function of DHFR concentration and shows linear relationship. The concentration of immobilized enzyme was varied by using 5 different size mica chips. The dsDNA concentration was the same for all chips, assuming that the surface area of the mica chip dictates the resulting amount of bound enzyme (i.e. larger sized chip would have more bound DHFR). The activity and concentration of each chip was measured.

Ag(I) is used to form a π-stacked metal-organic solid that exhibits remarkably high electrical conductivity. The solid undergoes a single-crystal-to-single-crystal [2+2] photodimerization to generate a 1D coordination polymer with over 40% higher conductivity. The Ag(I) complex represents the first example of an increase in conductivity resulting from a [2+2] photodimerization. Density of states calculations show a higher contribution from Ag(I) ions to the valence band in the photodimerized solid, supporting the increase in conductivity.

Escherichia coli dihydrofolate reductase (ecDHFR) has one surface cysteine, C152, located opposite and distal to the active site. Here, we show that the enzyme spontaneously assembles on an ultraflat gold surface as a homogeneous, covalently bound monolayer. Surprisingly, the activity of the gold-immobilized ecDHFR as measured by radiographic analysis was found to be similar to that of the free enzyme in solution. Molecular recognition force spectroscopy was used to study the dissociation forces involved in the rupture of AFM probe-tethered methotrexate (MTX, a tight-binding inhibitor of DHFR) from the gold-immobilized enzyme. Treatment of the ecDHFR monolayer with free MTX diminished the interaction of the functionalized tip with the surface, suggesting that the interaction was indeed active-site specific. These findings demonstrate the viability of a simple and direct enzymatic surface-functionalization without the use of spacers, thus, opening the door to further applications in the area of biomacromolecular force spectroscopy.

Principles of crystal engineering have been applied toward the construction of supramolecular assemblies between an acid-functionalized tetraphenylethylene derivative and three different bis(pyridine)s [4,4'-bis(pyridyl)ethylene, 4,4'-bis(pyridyl)ethane, and 4,4'-bipyridine]. Each assembly was structurally characterized, and charge transfer interactions within each sample were visually apparent. Quantum chemical calculations were used to determine crystal band structure and band gap magnitude, and electrical properties of the materials were measured using conducting probe atomic force microscopy (CP-AFM). The crystals displayed charge-carrier capability, and the magnitude of semiconductivity varied systematically as a function of conjugation in the bis(pyridine) component. Crystals incorporating 4,4'-bis(pyridyl)ethylene and 4,4'-bipyridine displayed conductivities comparable to those of established organic semiconductors (μ(eff) = 0.38 and 1.7 × 10(-2) cm(2)/V·s, respectively).

Scanning transmission X-ray microscopy combined with near-edge X-ray absorption fine structure spectroscopy (STXM/NEXAFS) and optical microscopy coupled with Fourier transform infrared spectroscopy (micro-FTIR) have been applied to observe hygroscopic growth and chemical changes in malonic acid particles deposited on substrates. The extent of the hygroscopic growth of particles has been quantified in terms of the corresponding water-to-solute ratios (WSR) based on STXM/NEXAFS and micro-FTIR data sets. WSR values derived separately from two applied methods displayed a remarkable agreement with previous data reported in the literature. Comparison of NEXAFS and FTIR spectra acquired at different relative humidity (RH) shows efficient keto-enol tautomerization of malonic acid, with the enol form dominating at higher RH. The keto-enol equilibrium constants were calculated using relevant peak intensities in the carbon and oxygen K-edge NEXAFS spectra as a function of RH. We report strong dependence of the equilibrium constant on RH, with measured values of 0.18 ± 0.03, 1.11 ± 0.14, and 2.33 ± 0.37 corresponding to 2, 50, and 90% RH, respectively. Enols are important intermediates in aldol condensation reactions pertaining to formation and atmospheric aging of secondary organic aerosol (SOA). The present knowledge assumes that constituents of atmospheric deliquesced particles undergo aqueous chemistry with kinetic and equilibrium constants analogous to reactions in bulk solutions, which would estimate absolute dominance of the keto form of carboxylic acids. For instance, the keto-enol equilibrium constant of malonic acid in diluted aqueous solution is <10(-4). Our results suggest that in deliquesced micrometer-size particles, carboxylic acids may exist in predominantly enol forms that need to be explicitly considered in atmospheric aerosol chemistry.

Metallogels form from Cu(II) ions and tetratopic ligand rctt-1,2-bis(3-pyridyl)-3,4-bis(4-pyridyl)cyclobutane. The tetrapyridyl cyclobutane has been synthesized in the organic solid state. The gel forms with a variety of counteranions and gels water. The hydrogel is thixotropic and is composed of nanoscale metal-organic particles (NMOPs), a high surface area of which likely accounts for the gelation of the polar aqueous medium. A shear stress profile of the thixotropic hydrogel gave a yield value of 8.33 Pa. A novel combination of atomic force microscopy (AFM) and scanning transmission X-ray microscopy (STXM) is used to assess the densities of individual NMOPs. A density of 1.37 g/cm(3) has been determined. A single-crystal X-ray diffraction study demonstrates the ability of the unsymmetrical cyclobutane 3,4'-tpcb to self-assemble with Cu(II) ions in [Cu(2)(hfac)(4)(3,4'-tpcb)](∞) (where hfac is hexafluoroacetylacetonate) to form a solvated 1D coordination polymer.

A novel application of single particle scanning transmission X-ray microscopy (STXM) and near edge X-ray absorption fine structure (NEXAFS) spectroscopy is presented for quantitative analysis of hygroscopic properties and phase transitions of individual submicrometer particles. The approach utilizes the exposure of substrate-deposited individual particles to water vapor at different relative humidity followed by STXM/NEXAFS spectromicroscopy analysis. The hygroscopic properties of atmospherically relevant NaCl, NaBr, NaI, and NaNO(3) submicrometer particles were measured to evaluate the utility of the approach. An analytical approach for quantification of a water-to-solute ratio within an individual submicrometer particle during hydration and dehydration cycles is presented. The results for the deliquescence and efflorescence phase transitions and quantitative measurements of water-to-solute ratios are found in excellent agreement with available literature data. Oxygen K-edge NEXAFS spectra of submicrometer sodium halide droplets are reported along with a unique experimental observation of the formation of the halide-water anionic complex in NaBr and NaI microdimensional droplets. The analytical approach provides a unique opportunity for spectromicroscopy studies of water uptake on environmental particles collected in both laboratory and field studies.