Search

Local treatment of bone loss with an injection of a resorbable, calcium-based implant material to replace bone has a long history of clinical use. The in vivo discrimination of changes in bone versus implant is challenging with standard computed tomography (CT). However, spectral-CT techniques enable the separation between tissues of similar densities but different chemical compositions. Dual-layer spectral-CT imaging and postprocessing analysis methods were applied to investigate the separability of AGN1 (a triphasic calcium-based implant) and bone after AGN1 injection in n = 10 male cadaveric femurs ex vivo. Using the area under the curve (AUC) from receiver-operating characteristic (ROC) analyses, the separability of AGN1 from bone was assessed for AGN1 (postoperatively) versus compact and versus femoral neck cancellous bone (both preoperatively). CT techniques included conventional Hounsfield (HU) and density-equivalent units (BMD, mg hydroxyapatite [HA]/cm

This study introduced a rat model for preclinical investigation of magnesium-based biodegradable materials in bone fracture conditions, allowing longitudinal in vivo monitoring of fracture healing and implant degradation with multimodal imaging.

Bone metastasis in breast cancer has been linked to activity of c-Src kinase, one of the extensively explored tyrosine kinases in cell biology. The impact of TNF-related apoptosis inducing ligand (TRAIL) and TRAIL receptors has just recently been integrated into this conception. An osteotropic clone of MDA-MB-231 cells simulated a model for bone metastasis of triple-negative breast cancer (TNBC). The effects of Dasatinib, a clinically established inhibitor of Src kinases family and Abl were evaluated in vitro and in vivo. In vivo effects of Dasatinib treatment on the occurrence of skeletal metastases were tested in a xenograft mouse model after intra-cardiac injection of osteotropic MDA-MB-231-cells. Ex vivo analyses of the bone sections confirmed intraosseous growth of metastases and allowed determination of osteoclastic activity. Treatment of osteotropic MDA-MB-231 cells with Dasatinib inhibited proliferation rates in vitro. A shift in TRAIL-receptor expression towards an induction of oncogenic TRAIL-R2 was observed. In vivo, 15 of 30 mice received an intra-peritoneal treatment with Dasatinib. These mice showed significantly less skeletal metastases in bioluminescence scans. Moreover, a pronounced increase in bone volume was observed in the treatment group, as detected by µ-Computed Tomography. Dasatinib treatment also led to a greater increase in bone density in tibiae without metastatic affection, which was accompanied by reduced recruitment of osteoclasts. Our observations support the concept of utilizing Dasatinib in targeting early-stage bone metastatic TNBC and sustaining bone health.

Rodent models are commonly used in pre-clinical research of magnesium (Mg)-based and other types of biomaterials for fracture treatment. Most studies selected unstable fixation methods, and there is a lack of multimodal longitudinal

The local response of tissue triggered by implantation of degradable magnesium-based implant materials was investigated in vivo in a murine model. Pins (5.0 mm length by 0.5 mm diameter) made of Mg, Mg-10Gd, and Ti were implanted in the leg muscle tissue of C57Bl/6N mice (n = 6). Implantation was generally well tolerated as documented by only a mild short term increase in a multidimensional scoring index. Lack of difference between the groups indicated that the response was systemic and surgery related rather than material dependent. Longitudinal in vivo monitoring utilizing micro-computed tomography over 42 days demonstrated the highest and most heterogeneous degradation for Mg-10Gd. Elemental imaging of the explants by micro X-ray fluorescence spectrometry showed a dense calcium-phosphate-containing degradation layer. In order to monitor resulting surgery induced and/or implant material associated local cell stress, sphingomyelin based liposomes containing indocyanine green were administered. An initial increase in fluorescent signals (3-7 days after implantation) indicating cell stress at the site of the implantation was measured by in vivo fluorescent molecular tomography. The signal decreased until the 42nd day for all materials. These findings demonstrate that Mg based implants are well tolerated causing only mild and short term adverse reactions.

Background: We recently developed a liposomal nanoparticle system that can be used for drug delivery and simultaneously be monitored by optical or photoacoustic imaging devices. Here we tested the efficacy of alendronate as a homing molecule in SM-liposomes for bone targeting. Methods: Alendronate was immobilized covalently on the liposomal surface and the fluorescent dye indocyanine green was used as a payload in the liposomes. The indocyanine green delivery was analyzed by 3D optical tomography, optical fluorescence scanner, photoacoustic imaging, and by ex-vivo biodistribution studies. Results: The results show that the alendronate, coupled to the liposomal surface, increases sphingomyelin containing liposome targeting up to several-folds. Conclusion: The alendronate targeted liposomes open possibilities for an application in active bone targeting.

Osteoporosis is a skeletal disorder that leads to increased fracture risk due to decreased strength of cortical and trabecular bone. Even with state-of-the-art non-invasive assessment methods there is still a high underdiagnosis rate. Quantitative computed tomography (QCT) permits the selective analysis of cortical bone, however the low spatial resolution of clinical QCT leads to an overestimation of the thickness of cortical bone (Ct.Th) and bone strength.

The partial hepatectomy (PH) model is widely used to study liver regeneration. Currently, the extent of regeneration is analyzed by measuring the weight of the liver post-mortem or by magnetic resonance imaging. In this study we aimed to determine whether liver volume gain can be accurately measured using micro-computed tomography (microCT). Approximately 42% of the liver was removed by ligation in C57BL/6 N mice. Mice were divided into two study groups. In group 1 conventional characterization of liver hyperplasia was performed by weighing the liver post-mortem. In group 2, liver volume gain was determined by microCT volume estimation. MicroCT results showed equivalent regeneration rates compared with the conventional method without the need to mathematically determine initial liver weights before PH. This parameter is strongly influenced by the age, strain and sex of the mice. In addition non-invasive microCT determination of volume gain over multiple time-points using the same animal reduces the number of animals needing to be used (in line with the 3R principle of replacement, reduction and refinement).

Bisphosphonates have effects that are antiresorptive, antitumor, and antiapoptotic to osteoblasts and osteocytes, but an effective means of eliciting these multiple activities in the treatment of bone metastases has not been identified. Antimetabolite-bisphosphonate conjugates have potential for improved performance as a class of bone-specific antineoplastic drugs. The primary objective of the study was to determine whether an antimetabolite-bisphosphonate conjugate will preserve bone formation concomitant with antiresorptive and antitumor activity. 5-FdU-ale, a highly stable conjugate between the antimetabolite 5-fluoro-2'-deoxyuridine and the bisphosphonate alendronate, was tested for its therapeutic efficacy in a mouse model of MDA-MB231 breast cancer bone metastases. In vitro testing revealed osteoclasts to be highly sensitive to 5-FdU-ale. In contrast, osteoblasts had significantly reduced sensitivity. Tumor cells were resistant in vitro but in vivo tumor burden was nevertheless significantly reduced compared with untreated mice. Sensitivity to 5-FdU-ale was not mediated through inhibition of farnesyl diphosphate synthase activity, but cell cycle arrest was observed. Although serum tartrate-resistant acid phosphatase (TRAP) levels were greatly reduced by both drugs, there was no significant decrease in the serum bone formation marker osteocalcin with 5-FdU-ale treatment. In contrast, there was more than a fivefold decrease in serum osteocalcin levels with alendronate treatment (p

Multiple myeloma (MM) is a malignant plasma cell disease associated with severe bone destruction. Surgical intervention is often required to prevent vertebral body collapse and resulting neurological complications; however, its necessity is determined by measuring lesion size or number, without considering bone biomechanics. Finite element (FE) modeling, which simulates the physiological loading, may improve the prediction of fragility. To test this, we developed a quantitative computed tomography (QCT)-based FE model of the vertebra and applied it to a dataset of MM patients with and without prevalent fracture. FE models were generated from vertebral QCT scans of the T12 (T11 if T12 was fractured) of 104 MM patients, 45 with fracture and 59 without, using a low-dose scan protocol (1.5 mm slice thickness, 4.0 to 6.5 mSv effective dose). A calibration phantom enabled the conversion of the CT Hounsfield units to FE material properties. Compressive loading of the vertebral body was simulated and the stiffness, yield load, and work to yield determined. To compare the parameters between fracture and nonfracture groups, t tests were used, and standardized odds ratios (sOR, normalized to standard deviation) and 95% confidence intervals were calculated. FE parameters were compared to mineral and structural parameters using linear regression. Patients with fracture showed lower vertebral stiffness (-15.2%; p = 0.010; sOR = 1.73; 95% CI, 1.11 to 2.70), yield force (-21.5%; p = 0.002; sOR = 2.09; 95% CI, 1.27 to 3.43), and work to yield (-27.4%; p = 0.001; sOR = 2.28; 95% CI, 1.33 to 3.92) compared to nonfracture patients. All parameters correlated significantly with vBMD (stiffness: R2 = 0.57, yield force: R2 = 0.59, work to yield: R2 = 0.50, p < 0.001), BV/TV (stiffness: R2 = 0.56, yield force: R2 = 0.58, work to yield: R2 = 0.49, p < 0.001), and Tb.Sp (stiffness: R2 = 0.51, yield force: R2 = 0.53, work to yield: R2 = 0.45, p < 0.001). FE modeling identified MM patients with compromised mechanical integrity of the vertebra. Higher sOR values were obtained for the biomechanical compared to structural or mineral measures, suggesting that FE modeling improves fragility assessment in these patients. © 2016 American Society for Bone and Mineral Research.

Patients with cholestatic liver disease experience increased fracture risk. Higher circulating levels of a fibronectin isoform called oncofetal fibronectin (oFN) were detected in a subset of such patients. Administering this isoform to mice suppresses osteoblast differentiation and diminishes bone mineral density in vivo, suggesting it is responsible for bone loss in cholestatic liver disease. The aim of this study was to define the mechanism by which oFN affects osteoblast function and evaluate possible modifiers in experimental hepatic osteodystrophy. The fibronectin isoform oFN is characterized by the presence of various glycosylations. In line with this, adding oFN that underwent enzymatic O-deglycosylation to osteoblasts normalized nodule formation in vitro. Of three possible O-glycosylation sites in oFN, only a mutation at AA 33 of the variable region or binding of this glycosylated site with an antibody normalized osteoblast differentiation. Because the responsible site is located in the variable region of fibronectin, which binds to α4β1 or α4β7 integrins, these integrins were evaluated. We show that integrin α4β1 mediates the inhibitory effect of oFN both in vitro as well as in vivo. In a hepatic osteodystrophy mouse model, we demonstrate that liver fibrosis is associated with increased circulating oFN and diminished BMD. In addition, trabecular bone loss induced by oFN injection or fibrosis induction could be prevented by either administering an antibody that binds to α4 integrin (PS/2) or the CS1 peptide, which contains a binding site for α4β1 integrin. In summary, oFN inhibits osteoblast activity. This is because of an O-glycosylation in the variable region that results in decreased integrin-mediated signaling. This deleterious effect can be thwarted by binding α4β1 integrin. Thus, we have characterized the defect and the receptor mediating bone loss in patients with hepatic osteodystrophy and evaluated possible therapeutic interventions in a murine model. © 2016 American Society for Bone and Mineral Research.

Purpose: Accurate noninvasive assessment of vertebral bone marrow fat fraction is important for diagnostic assessment of a variety of disorders and therapies known to affect marrow composition. Moreover, it provides a means to correct fat-induced bias of single energy quantitative computed tomography (QCT) based bone mineral density (BMD) measurements. The authors developed new segmentation and calibration methods to obtain quantitative surrogate measures of marrow-fat density in the axial skeleton. Methods: The authors developed and tested two high resolution-QCT (HR-QCT) based methods which permit segmentation of bone voids in between trabeculae hypothesizing that they are representative of bone marrow space. The methods permit calculation of marrow content in units of mineral equivalent marrow density (MeMD). The first method is based on global thresholding and peeling (GTP) to define a volume of interest away from the transition between trabecular bone and marrow. The second method, morphological filtering (MF), uses spherical elements of different radii (0.1–1.2 mm) and automatically places them in between trabeculae to identify regions with large trabecular interspace, the bone-void space. To determine their performance, data were compared ex vivo to high-resolution peripheral CT (HR-pQCT) images as the gold-standard. The performance of the methods was tested on a set of excised human vertebrae with intact bone marrow tissue representative of an elderly population with low BMD. Results: 86% (GTP) and 87% (MF) of the voxels identified as true marrow space on HR-pQCT images were correctly identified on HR-QCT images and thus these volumes of interest can be considered to be representative of true marrow space. Within this volume, MeMD was estimated with residual errors of 4.8 mg/cm3 corresponding to accuracy errors in fat fraction on the order of 5% both for GTP and MF methods. Conclusions: The GTP and MF methods on HR-QCT images permit noninvasive localization and densitometric assessment of marrow fat with residual accuracy errors sufficient to study disorders and therapies known to affect bone marrow composition. Additionally, the methods can be used to correct BMD for fat induced bias. Application and testing in vivo and in longitudinal studies are warranted to determine the clinical performance and value of these methods.

Vertebral whole bone strength is substantially affected by cortical bone properties. Disease and therapy may affect cancellous and cortical bone differently. Unlike Dual X-ray Absorptiometry (DXA), Quantitative Computed Tomography (QCT) permits selective assessment of cortical and cancellous bone, but image quality limits the accuracy. We present an image processing method specifically adopted to thin cortices that substantially improves accuracy. Ten human vertebrae embedded in epoxy resin were imaged using clinical QCT and High-Resolution QCT (HR-QCT) protocols, both acquired on a clinical whole body CT scanner, whereas high resolution peripheral QCT (HR-pQCT) was used as gold standard. Microstructural variables and BMD were calculated using in-house software Structural Insight for QCT and HR-QCT and the manufacturer's μCT evaluation software for HR-pQCT. An adjusted measure, a deconvolved cortical thickness (dcCt.Th), corrected for partial volume effects, was derived applying the new Iterative Convolution OptimizatioN (ICON) method. Direct measurements of cortical thickness (Ct.Th) showed substantial overestimation with mean ± standard deviation of 1.8 ± 0.5 mm for QCT and 1.5 ± 0.3 mm for HR-QCT compared to 0.37 ± 0.07 mm using HR-pQCT. Correlations of both QCT (r 2 = 0.05, p > 0.5.) and HR-QCT (r 2 = 0.38, p = 0.060) with the gold standard HR-pQCT were not significant. Also QCT-based BMD and BMC as well as HR-QCT-based BMD did not show a significant correlation with the gold standard approach. Only HR-QCT-based BMC showed a modest correlation (r 2 = 0.59, p = 0.01) After applying ICON corrections, dcCt.Th resulted in 0.52 ± 0.09 mm for QCT and 0.43 ± 0.07 mm for HR-QCT, both significantly correlated to HR-pQCT (r 2 = 0.75, p = 0.0012 and r 2 = 0.93, p Due to inaccurate segmentation uncorrected QCT-based Ct.Th measures as well as BMD and BMC showed no correlation to HR-pQCT and thus such bias cortical data can be misleading. The application of ICON reduced random overestimation bias to about 50 μm and 20 μm for QCT and HR-QCT, respectively, leading to a recovery of a significant correlation with the reference data of HR-pQCT. This reveals the potential for fairly accurate assessment of cortical thickness, allowing to better characterize cortical mechanical competence. These results warrant testing of the performance in vivo.

Quantitative computed tomography (QCT) is a widely used tool for osteoporosis diagnosis and monitoring. The assessment of cortical markers like cortical bone mineral density (BMD) and thickness is a demanding task, mainly because of the limited spatial resolution of QCT. We propose a direct model based method to automatically identify the surface through the center of the cortex of human vertebra. We develop a statistical bone model and analyze its probability distribution after the imaging process. Using an as-rigid-as-possible deformation we find the cortical surface that maximizes the likelihood of our model given the input volume. Using the European Spine Phantom (ESP) and a high resolution µCT scan of a cadaveric vertebra, we show that the proposed method is able to accurately identify the real center of cortex ex-vivo. To demonstrate the in-vivo applicability of our method we use manually obtained surfaces for comparison.

Biodegradable magnesium alloys are a new class of implant material suitable for bone surgery. The aim of this study was to investigate plates and screws made of magnesium for osteosynthesis in comparison to titanium in a cranial fracture model. Implants were used for internal fixation of a cranio-osteoplasty in nine minipigs. Computed tomography was conducted repeatedly after surgery. The implants and the adjacent tissues were harvested 10, 20 and 30 weeks after surgery and investigated by micro-computed tomography and histological analysis. The surgical procedure and the inserted osteosynthesis material were well tolerated by the animals, and the bone healing of the osteoplasty was undisturbed at all times. The adjacent bone showed formation of lacunas in the magnesium group, resulting in a lower bone-to-implant contact ratio than that of titanium (72 vs. 94% at week 30), but this did not lead to clinical side effects. Radiological measurements showed no reduction in osteosynthesis material volume, but indicated signs of degradation: distinct volumes within the magnesium osteosynthesis group had lower density in micro-computed tomography, and these volumes increased up to 9% at week 30. The histological preparations showed areas of translucency and porosity inside the magnesium, but the outer shape of the osteosynthesis material remained unchanged. No fracture or loosening of the osteosynthesis devices appeared. Soft tissue probes confirmed sufficient biocompatibility. Given their biodegradable capacity, biocompatibility, mechanical strength and visibility on radiographs, osteosynthesis plates made of magnesium alloys are suitable for internal fixation procedures. Statement of Significance To the best of our knowledge this is the first study that used biodegradable magnesium implants for osteosynthesis in a cranial fracture model. The cranio-osteoplasty in miniature pigs allowed in vivo application of plate and screw osteosynthesis of standard-sized implants and the implementation of surgical procedures similar to those conducted on human beings. The osteosynthesis configuration, size, and mechanical properties of the magnesium implants within this study were comparable to those of titanium-based osteosynthesis materials. The results clearly show that bone healing was undisturbed in all cases and that the biocompatibility to hard- and soft tissue was sufficient. Magnesium implants might help to avoid long-term complications and secondary removal procedures due to their biodegradable properties.

The metastasis of tumor cells to bone can lead to osteolytic and osteosclerotic lesions, which cause severe, highly-localized bone destruction and abnormal bone apposition, respectively. Accurate quantification of lesion progression is critical to understand underlying mechanisms and assess treatment efficacy; however, standard structural parameters may be insensitive to local changes. We developed methods to quantify osteolytic and osteosclerotic lesions using micro-computed tomography (μCT) within in vivo mouse datasets. Two Balb/c nude datasets were used: (i) bone-homing MDA-MB-231 (osteolytic) cells injected into the left ventricle, treatment with alendronate or vehicle, and weekly μCT (proximal tibia) for 4 weeks, and (ii) MCF7 (osteosclerotic) cells injected into the right tibia and weekly μCT over 12 weeks. After registering images to baseline, osteolytic lesion volume was determined by summing all baseline bone voxels at distances greater than a threshold (150 μm) from the nearest follow-up. Osteosclerotic lesions were determined by measuring the distance from each follow-up surface voxel to the nearest baseline surface and calculating the standard deviation of distance values (SDDT) of the surrounding voxels. Bone mineral density (BMD), bone volume density (BV/TV), and separation (Sp) were determined for comparison. Osteolytic lesions were observed 1 week after tumor cell injection; however, no corresponding BV/TV losses or Sp increases were observed, indicating that standard parameters were unable to detect early metastatic changes. Lesion volume was smaller in the alendronate versus control group (15.0%, p = 0.004 and 18.6%, p = 0.002 of control lesion volume at weeks 3 and 4, respectively). In the osteosclerotic dataset, increased SDDT was observed following injection, providing a potential new measure of osteosclerotic bone apposition. These data show that quantification of local structural change with serial μCT may overcome the limitations of standard mineral and microstructural parameters, and successfully separates metastatic and normal bone turnover. © 2017 American Society for Bone and Mineral Research.

SummaryThe Biomechanically founded individualised osteoporosis Assessment and treatment (BioAsset) consortium pursues experimental and clinical studies in the context of skeletal effects of bisphosphonate treatment. Here, first results using newly developed diagnostic methods in a set of vertebral bone specimen obtained from donors with documented bisphosphonate history ranging from 0 to more than 5 years of treatment are presented. A new thoracolumbar quantitative computed tomography (QCT) protocol covering T6 to L4 plus high-resolution QCT (HRQCT) assessment of T12 were compared with high-resolution peripheral QCT (HRpQCT) and micro-CT scans of excised specimens serving as gold standard techniques. Finite element (FE) modelling was performed. Material, ultrastructural, and micromechanical properties were tested on a set of single trabeculae obtained from the donor specimens. A newly developed quantitative ultrasound (QUS) device for measuring the anisotropy of cortical material properties at the tibia was designed and built. The thoracolumbar QCT protocol permitted in situ imaging with good image quality and automated segmentation of vertebral bodies in the whole range from T6 to L4. The duration of bisphosphonate treatment was significantly associated with increased levels of mineralization and this effect could be measured with HRQCT performed on excised specimens. Microstructural parameters contributed to vertebral bone strength modelled by FE analysis independently of bone mineral density. The new QUS tibia scanner permitted measuring the acoustical anisotropy of reference materials. Taken together, these results document that new methods developed in BioAsset permit a more comprehensive assessment of bone fragility. The set of donor specimens with a documented history of bisphosphonate treatment allows for the assessment of the effects of long-term treatment from the organ down to the tissue and material level. These results will ultimately be linked to the parallel clinical study to provide guidance for determining the optimum duration of bisphosphonate treatment to reduce the incidence of osteoporotic fractures.

[Proceedings] - , 2016. - ISBN - doi:10.1117/12.2237563 SPIE Optical Engineering + Applications, San Diego, California, 28 Aug 2016 - 1 Sep 2016; Proceedings of SPIE 9967, 996704 (2016). doi:10.1117/12.2237563, Magnesium(Mg)-alloys are promising candidates as temporary implants for orthopedic and cranio-facial applications. They can sustain tissues during healing, thanks to favorable mechanical properties, and then they slowly degrade into biocompatible products, avoiding the need of a second surgery for implant removal. They have the potential to benefit a vast number of patients, especially children and elderly patients. However, to be able to tailor their degradation to match the speed of tissue regeneration it is crucial to understand how they actually degrade in the living organism. We utilized high-resolution synchrotron-based tomography at the beamline P05 operated by HZG at the storage ring PETRA III at DESY to study the degradation of 3 novel Mg-alloys in rat bone and the consequent bone response. On three-dimensional reconstructions of the bone-implant explants we were able to follow the dynamic transformation that the materials underwent at different healing times and on the basis of absorption coefficients we could distinguish and quantify the amount of remaining implants, the corrosion layers and the new bone. This was a great advantage compared to laboratory CT, for which the limitation in contrast and in resolution made impossible to discriminate between original alloy, degradation products and bone, leading to inaccurate determination of the materials degradation rates. The same samples imaged by tomography were used for non-decalcified histology. The combination of histological and tomographical images provided new insight on the nature of the bone-to-implant interface and of the degradation products, which appeared to have great similarities to the host bone., Published by SPIE, Bellingham, Wash.

Accurate noninvasive assessment of vertebral bone marrow fat fraction is important for diagnostic assessment of a variety of disorders and therapies known to affect marrow composition. Moreover, it provides a means to correct fat-induced bias of single energy quantitative computed tomography (QCT) based bone mineral density (BMD) measurements. The authors developed new segmentation and calibration methods to obtain quantitative surrogate measures of marrow-fat density in the axial skeleton.The authors developed and tested two high resolution-QCT (HR-QCT) based methods which permit segmentation of bone voids in between trabeculae hypothesizing that they are representative of bone marrow space. The methods permit calculation of marrow content in units of mineral equivalent marrow density (MeMD). The first method is based on global thresholding and peeling (GTP) to define a volume of interest away from the transition between trabecular bone and marrow. The second method, morphological filtering (MF), uses spherical elements of different radii (0.1-1.2 mm) and automatically places them in between trabeculae to identify regions with large trabecular interspace, the bone-void space. To determine their performance, data were compared ex vivo to high-resolution peripheral CT (HR-pQCT) images as the gold-standard. The performance of the methods was tested on a set of excised human vertebrae with intact bone marrow tissue representative of an elderly population with low BMD.86% (GTP) and 87% (MF) of the voxels identified as true marrow space on HR-pQCT images were correctly identified on HR-QCT images and thus these volumes of interest can be considered to be representative of true marrow space. Within this volume, MeMD was estimated with residual errors of 4.8 mg/cm(3) corresponding to accuracy errors in fat fraction on the order of 5% both for GTP and MF methods.The GTP and MF methods on HR-QCT images permit noninvasive localization and densitometric assessment of marrow fat with residual accuracy errors sufficient to study disorders and therapies known to affect bone marrow composition. Additionally, the methods can be used to correct BMD for fat induced bias. Application and testing in vivo and in longitudinal studies are warranted to determine the clinical performance and value of these methods.

Multiple myeloma (MM) is a malignant plasma cell disease associated with severe bone destruction. Surgical intervention is often required to prevent vertebral body collapse and resulting neurological complications; however, its necessity is determined by measuring lesion size or number, without considering bone biomechanics. Finite element (FE) modeling, which simulates the physiological loading, may improve the prediction of fragility. To test this, we developed a quantitative computed tomography (QCT)-based FE model of the vertebra and applied it to a dataset of MM patients with and without prevalent fracture. FE models were generated from vertebral QCT scans of the T

Bisphosphonates have effects that are antiresorptive, antitumor, and antiapoptotic to osteoblasts and osteocytes, but an effective means of eliciting these multiple activities in the treatment of bone metastases has not been identified. Antimetabolite-bisphosphonate conjugates have potential for improved performance as a class of bone-specific antineoplastic drugs. The primary objective of the study was to determine whether an antimetabolite-bisphosphonate conjugate will preserve bone formation concomitant with antiresorptive and antitumor activity. 5-FdU-ale, a highly stable conjugate between the antimetabolite 5-fluoro-2'-deoxyuridine and the bisphosphonate alendronate, was tested for its therapeutic efficacy in a mouse model of MDA-MB231 breast cancer bone metastases. In vitro testing revealed osteoclasts to be highly sensitive to 5-FdU-ale. In contrast, osteoblasts had significantly reduced sensitivity. Tumor cells were resistant in vitro but in vivo tumor burden was nevertheless significantly reduced compared with untreated mice. Sensitivity to 5-FdU-ale was not mediated through inhibition of farnesyl diphosphate synthase activity, but cell cycle arrest was observed. Although serum tartrate-resistant acid phosphatase (TRAP) levels were greatly reduced by both drugs, there was no significant decrease in the serum bone formation marker osteocalcin with 5-FdU-ale treatment. In contrast, there was more than a fivefold decrease in serum osteocalcin levels with alendronate treatment (p 0.001). This finding is supported by time-lapse micro-computed tomography analyses, which revealed bone formation volume to be on average 1.6-fold higher with 5-FdU-ale treatment compared with alendronate (p 0.001). We conclude that 5-FdU-ale, which is a poor prenylation inhibitor but maintains potent antiresorptive activity, does not reduce bone formation and has cytostatic antitumor efficacy. These results document that conjugation of an antimetabolite with bisphosphonates offers flexibility in creating potent bone-targeting drugs with cytostatic, bone protection properties that show limited nephrotoxicity. This unique class of drugs may offer distinct advantages in the setting of targeted adjuvant therapy and chemoprevention of bone diseases. © 2016 American Society for Bone and Mineral Research.

Patients with cholestatic liver disease experience increased fracture risk. Higher circulating levels of a fibronectin isoform called oncofetal fibronectin (oFN) were detected in a subset of such patients. Administering this isoform to mice suppresses osteoblast differentiation and diminishes bone mineral density in vivo, suggesting it is responsible for bone loss in cholestatic liver disease. The aim of this study was to define the mechanism by which oFN affects osteoblast function and evaluate possible modifiers in experimental hepatic osteodystrophy. The fibronectin isoform oFN is characterized by the presence of various glycosylations. In line with this, adding oFN that underwent enzymatic O-deglycosylation to osteoblasts normalized nodule formation in vitro. Of three possible O-glycosylation sites in oFN, only a mutation at AA 33 of the variable region or binding of this glycosylated site with an antibody normalized osteoblast differentiation. Because the responsible site is located in the variable region of fibronectin, which binds to α4β1 or α4β7 integrins, these integrins were evaluated. We show that integrin α4β1 mediates the inhibitory effect of oFN both in vitro as well as in vivo. In a hepatic osteodystrophy mouse model, we demonstrate that liver fibrosis is associated with increased circulating oFN and diminished BMD. In addition, trabecular bone loss induced by oFN injection or fibrosis induction could be prevented by either administering an antibody that binds to α4 integrin (PS/2) or the CS1 peptide, which contains a binding site for α4β1 integrin. In summary, oFN inhibits osteoblast activity. This is because of an O-glycosylation in the variable region that results in decreased integrin-mediated signaling. This deleterious effect can be thwarted by binding α4β1 integrin. Thus, we have characterized the defect and the receptor mediating bone loss in patients with hepatic osteodystrophy and evaluated possible therapeutic interventions in a murine model. © 2016 American Society for Bone and Mineral Research.

Type 2 diabetes mellitus increases skeletal fragility; however, the contributing mechanisms and the efficacy of bone-forming agents are unclear. We studied diabetes and parathyroid hormone (PTH) treatment effects on cortical porosity (Ct.Po), non-enzymatic glycation (NEG) and bone mechanics in Zucker diabetic fatty (ZDF) rats. Eleven-week old ZDF diabetic (DB) and non-diabetic (ND) rats were given 75μg/kg PTH (1-84) or vehicle 5days per week over 12weeks. The right femora and L4 vertebrae were excised, micro-CT scanned, and tested in 3-point bending and uniaxial compression, respectively. NEG of the samples was determined using fluorescence. Diabetes increased Ct.Po (vertebra (vert): +40.6%, femur (fem): +15.5% vs. ND group, p

accordingly for the PSF of the CT imaging system • Deducing an edge-spread-function (ESF) and a non-infesitesimal line-spread-function (LSF) • Putting the ESF for the spongiosa plateau and the LSF for the cortex into one function • Setting the full mineralization to 1100mgHA/cc • Fitting spongiosa plateau (ESF) and cortex plateau (LSF) on the BMD(ridge distance) data yields the deconvoluted cortical thickness dcCt.Th • Fitting an additional epoxy plateau outside the bone (yellow) results in dcCt.Th* This fit procedure can be done with a free δ, actually turning the cortex itself into a „test body“ to access the PSF‘s FWHM. Improved assessment of vertebral cortex thickness by means of analytical deconvolution of radial bone mineral density distributions

In the last years new methods of data acquisition and processing in geosciences, inspired by growing computer performance, have led to an increased amount of data, and this development will proceed surely. In this paper we present the conception and technical realization of an interdisciplinary research group's geodata management as a combination of a metadata catalog together with web mapping technology. Clearly related with the storage and retrieval of different datasets is the need of visualization. 3D visualization in geoscientific interpretation is a useful tool, if numerous, heterogenic datasets have to be visualized at the same time. Moreover, advanced sensing technology often generates native three-dimensional datasets. Using a case study from the Collaborative Research Centre “SFB 574”, we present the possibilities of our stereoscopic projection system and want to explain the benefit of 3D visualization for research in general and university education in particular, as low-cost systems become available nowadays.