Search

Abstract Background The management of hemodynamically unstable pelvic ring injuries necessitates surgical intervention, often involving procedures such as external fixation and percutaneous screw placement. Given the infrequent performance of these procedures, regular training is imperative to ensure readiness for emergencies. Our pre- post simulation study aimed to adapt and validate a realistic simulation model for stabilizing unstable pelvic ring injuries, facilitating participants’ knowledge retention and procedural confidence enhancement. Methods A standardized simulator of an unstable pelvic ring utilizing synthetic pelvic bones featuring complete disruption of the symphysis and sacroiliac joint was developed. Trauma surgeons of a level one academic hospital were invited to perform external fixation and emergency sacroiliac screw application under C-arm guidance. Prior to and following the simulation session, participants completed a subjective questionnaire assessing their confidence in emergency interventions on a 10-point Likert scale (10-LS). Objective parameters, such as intraoperative imaging quality, reduction accuracy, and the positioning of screws, wires, and external fixators, were also evaluated as secondary outcome measures. Results Fifteen trauma surgeons (10 residents, 5 consultants) participated in the simulation over the course of one day. The mean total operation time was 20.34 ± 6.06 min, without significant differences between consultants and residents (p = 0.604). The confidence for emergency SI-Screw placement increased significantly after the simulator (10-LS: Before = 3.8 ± 3.08 vs. After = 5.67 ± 2.35; p = 0.002) as well as after external fixation (10-LS: Before = 3.93 ± 2.79 vs. After = 6.07 ± 2.52; p = 0.002). In addition, confidence in (intraoperative) pelvic imaging increased significantly (10-LS: Before = 4.60 ± 3.0 vs. After = 6.53 ± 2.39; p = 0.011). Overall, the model was rated as a realistic simulation of clinical practice (10-LS = 7.87 ± 1.13). Conclusions Our unstable pelvis fracture model is a tool to practice emergency interventions such as external fixation and percutaneous techniques. Participants benefitted from this in terms of technical instrumentation as well as intraoperative imaging. Further studies are required to validate the objective benefits and improvements that participants undergo through frequent training.

BackgroundThe aim of the study was to determine the impact that PHTLS® course participation had on self-confidence of emergency personnel, regarding the pre-hospital treatment of patients who had suffered severe trauma. Furthermore, the goal was to determine the impact of specific medical profession, work experience and prior course participation had on the benefits of PHTLS® training.MethodsA structured questionnaire study was performed. Healthcare providers from local emergency services involved in pre-hospital care in the metropolitan area of Zurich (Switzerland, Europe) who completed a PHTLS® course were included. Altered self-confidence, communication, and routines in the treatment of severe trauma patients were examined. The impact of prior course participation, work experience and profession on course benefits were evaluated.ResultsThe response rate was 76%. A total of 6 transport paramedics (TPs), 66 emergency paramedics (EPs) and 15 emergency doctors (EDs) were included. Emergency paramedics had significantly more work experience compared with EDs (respectively 7.1 ± 5.7 yrs. vs. 4.5 ± 2.1 yrs., p = 0.004). 86% of the participants reported increased self-confidence in the pre-hospital management of severe trauma upon PHTLS® training completion. Moreover, according to 84% of respondents, extramural treatment of trauma changed upon course completion. PHTLS® course participants had improved communication in 93% of cases. This was significantly more frequent in EPs than TPs (p = 0.03). Multivariable analysis revealed emergency paramedics benefit the most from PHTLS® course participation.ConclusionThe current study shows that PHTLS® training is associated with improved self-confidence and enhanced communication, with regards to treatment of severe trauma patients in a pre-hospital setting, among medical emergency personnel. Additionally, emergency paramedics who took the PHTLS® course improved in overall self-confidence. These findings imply that all medical personal involved in the pre-hospital care of trauma patients, in a metropolitan area in Europe, do benefit from PHTLS® training. This was independent of the profession, previous working experience or prior alternative course participation.

Abstract Purpose The incidence of acetabular fractures (AFs) is increasing in all industrial nations, with posterior column fractures (PCFs) accounting for 18.5–22% of these cases. Treating displaced AFs in elderly patients is a known challenge. The optimal surgical strategy implementing open reduction and internal fixation (ORIF), total hip arthroplasty (THA), or percutaneous screw fixation (SF), remains debated. Additionally, with either of these treatment methods, the post-surgical weight bearing protocols are also ambiguous. The aim of this biomechanical study was to evaluate construct stiffness and failure load following a PCF fixation with either standard plate osteosynthesis, SF, or using a screwable cup for THA under full weight bearing conditions. Methods Twelve composite osteoporotic pelvises were used. A PCF according to the Letournel Classification was created in 24 hemi-pelvis constructs stratified into three groups (n = 8) as follows: (i) posterior column fracture with plate fixation (PCPF); (ii) posterior column fracture with SF (PCSF); (iii) posterior column fracture with screwable cup fixation (PCSC). All specimens were biomechanically tested under progressively increasing cyclic loading until failure, with monitoring of the interfragmentary movements via motion tracking. Results Initial construct stiffness (N/mm) was 154.8 ± 68.3 for PCPF, 107.3 ± 41.0 for PCSF, and 133.3 ± 27.5 for PCSC, with no significant differences among the groups, p = 0.173. Cycles to failure and failure load were 7822 ± 2281 and 982.2 ± 428.1 N for PCPF, 3662 ± 1664 and 566.2 ± 366.4 N for PCSF, and 5989 ± 3440 and 798.9 ± 544.0 N for PCSC, being significantly higher for PCPF versus PCSF, p = 0.012. Conclusion Standard ORIF of PCF with either plate osteosynthesis or using a screwable cup for THA demonstrated encouraging results for application of a post-surgical treatment concept with a full weight bearing approach. Further biomechanical cadaveric studies with larger sample size should be initiated for a better understanding of AF treatment with full weight bearing and its potential as a concept for PCF fixation.

Abstract Background/purpose Impaired healing is a feared complication with devastating outcomes for each patient. Most studies focus on geriatric fracture fixation and assess well known risk factors such as infections. However, risk factors, others than infections, and impaired healing of proximal femur fractures in non-geriatric adults are marginally assessed. Therefore, this study aimed to identify non-infection related risk factors for impaired fracture healing of proximal femur fractures in non-geriatric trauma patients. Methods This study included non-geriatric patients (aged 69 years and younger) who were treated between 2013 and 2020 at one academic Level 1 trauma center due to a proximal femur fracture (PFF). Patients were stratified according to AO/OTA classification. Delayed union was defined as failed callus formation on 3 out of 4 cortices after 3 to 6 months. Nonunion was defined as lack of callus-formation after 6 months, material breakage, or requirement of revision surgery. Patient follow up was 12 months. Results This study included 150 patients. Delayed union was observed in 32 (21.3%) patients and nonunion with subsequent revision surgery occurred in 14 (9.3%). With an increasing fracture classification (31 A1 up to 31 A3 type fractures), there was a significantly higher rate of delayed union. Additionally, open reduction and internal fixation (ORIF) (OR 6.17, (95% CI 1.54 to 24.70, p ≤ 0.01)) and diabetes mellitus type II (DM) (OR 5.74, (95% CI 1.39 to 23.72, p = 0.016)), were independent risk factors for delayed union. The rate of nonunion was independent of fracture morphology, patient’s characteristics or comorbidities. Conclusion Increasing fracture complexity, ORIF and diabetes were found to be associated with delayed union of intertrochanteric femur fractures in non-geriatric patients. However, these factors were not associated with the development of nonunion.

Background and Objectives: Despite the established role of subtalar joint arthrodesis (SJA) for treatment of subtalar osteoarthritis, achieving bone union remains challenging, with up to 46% non-union rates. Adequate compression and stable fixation are crucial for successful outcomes, with internal screw fixation being the gold standard for SJA. The delta configuration, featuring highly divergent screws, offers stability, however, it can result in hardware irritation in 20–30% of patients. Solutions to solve this complication include cannulated compression screw (CCS) countersinking or cannulated compression headless screw (CCHS) application. The aim of this biomechanical study was to investigate the stability of a delta configuration for SJA utilizing either a combination of a posterior CCHS and an anterior CCS or a standard two-CCS combination. Materials and Methods: Twelve paired human cadaveric lower legs were assigned pairwise to two groups for SJA using either two CCSs (Group 1) or one posterior CCHS and one anterior CCS (Group 2). All specimens were tested under progressively increasing cyclic loading to failure, with monitoring of the talocalcaneal movements via motion tracking. Results: Initial stiffness did not differ significantly between the groups, p = 0.949. Talocalcaneal movements in terms of varus–valgus deformation and internal–external rotation were significantly bigger in Group 1 versus Group 2, p ≤ 0.026. Number of cycles until reaching 5° varus–valgus deformation was significantly higher in Group 2 versus Group 1, p = 0.029. Conclusions: A delta-configuration SJA utilizing a posterior CCHS and an anterior CCS is biomechanically superior versus a standard configuration with two CCSs. Clinically, the use of a posterior CCHS could prevent protrusion of the hardware in the heel, while an anterior CCS could facilitate less surgical time and thus less complication rates.

Abstract Background/Purpose Posterior pelvis ring injuries represent typical high-energy trauma injuries in young adults. Joint stabilization with two cannulated sacroiliac (SI) screws at the level of sacral vertebrae S1 and S2 is a well-established procedure. However, high failure- and implant removal (IR) rates have been reported. Especially, the washer recovery can pose the most difficult part of the IR surgery, which is often associated with complications. The aim of this biomechanical study was to evaluate the stability of S1-S2 fixation of the SI joint using three different screw designs. Methods Eighteen artificial hemi-pelvises were assigned to three groups (n = 6) for SI joint stabilization through S1 and S2 corridors using either two 7.5 mm cannulated compression headless screws (group CCH), two 7.3 mm partially threaded SI screws (group PT), or two 7.3 mm fully threaded SI screws (group FT). An SI joint dislocation injury type III APC according to the Young and Burgess classification was simulated before implantation. All specimens were biomechanically tested to failure in upright standing position under progressively increasing cyclic loading. Interfragmentary and bone-implant movements were captured via motion tracking and evaluated at four time points between 4000 and 7000 cycles. Results Combined interfragmentary angular displacement movements in coronal and transverse plane between ilium and sacrum, evaluated over the measured four time points, were significantly bigger in group FT versus both groups CCH and PT, p ≤ 0.047. In addition, angular displacement of the screw axis within the ilium under consideration of both these planes was significantly bigger in group FT versus group PT, p = 0.038. However, no significant differences were observed among the groups for screw tip cutout movements in the sacrum, p = 0.321. Cycles to failure were highest in group PT (9885 ± 1712), followed by group CCH (9820 ± 597), and group FT (7202 ± 1087), being significantly lower in group FT compared to both groups CCH and PT, p ≤ 0.027. Conclusion From a biomechanical perspective, S1-S2 SI joint fixation using two cannulated compression headless screws or two partially threaded SI screws exhibited better interfragmentary stability compared to two fully threaded SI screws. The former can therefore be considered as a valid alternative to standard SI screw fixation in posterior pelvis ring injuries. In addition, partially threaded screw fixation was associated with less bone-implant movements versus fully threaded screw fixation. Further human cadaveric biomechanical studies with larger sample size should be initiated to understand better the potential of cannulated compression headless screw fixation for the therapy of the injured posterior pelvis ring in young trauma patients.

Abstract Purpose Soft tissue injury and soft tissue injury as risk factors for nonunion following trochanteric femur fractures (TFF) are marginally investigated. The aim of this study was to identify risk factors for impaired fracture healing in geriatric trauma patients with TFF following surgical treatment with a femoral nail. Methods This retrospective cohort study included geriatric trauma patients (aged > 70 years) with TFF who were treated with femoral nailing. Fractures were classified according to AO/OTA. Nonunion was defined as lack of callus-formation after 6 months, material breakage, and requirement of revision surgery. Risk factors for nonunion included variables of clinical interest (injury pattern, demographics, comorbidities), as well as type of approach (open versus closed) and were assessed with uni- and multivariate regression analyses. Results This study included 225 geriatric trauma patients. Nonunion was significantly more frequently following AO/OTA 31A3 fractures (N = 10, 23.3%) compared with AO/OTA type 31A2 (N = 6, 6.9%) or AO/OTA 31A1 (N = 3, 3.2%, p

Abstract Background As electric bicycles (e-bikes) become increasingly popular, reports of injuries associated with e-bike usage are also rising. Patterns, characteristics, and severity of injuries following e-bike crashes need further investigation, particularly in contrast to injuries from conventional bicycle crashes. Methods This prospective observational study included 82 patients treated at a Level II trauma center for injuries resulting from an electric or conventional bicycle crash. Data were collected over one year (05.09.2017–19.09.2018) during in- and outpatient visits. A study-specific case report form was used to identify the bicycle type, cycling behavior (e.g., use of a helmet, safety gear, alcohol), and circumstances of the crash (e.g., road conditions, speed, cause of the incident, time of day, season). Additional information about patient demographics, treatment, and injury characteristics, such as the Injury Severity Score (ISS) and body region injured, were documented. Results were analyzed using chi-square, Fisher’s exact, or Wilcoxon tests. Simple logistic or linear regression models were used to estimate associations. Results Of the 82 patients, 56 (67%) were riding a conventional bike and 27 (33%) were using an e-bike. Most incidents were either single-bicycle crashes (66%) or automobile collisions (26%), with no notable difference in prevalence rates between groups. Although a higher proportion of conventional bikers were male (67% vs. 48%), the difference was not significant. E-bikers were older (median 60 years (IQR 44–70) vs. 45 years (IQR 32–62); p = 0.008), were hospitalized more often (48% vs. 24%, p = 0.025), and had worse ISS (median 3 (IQR 2–4) vs. 1 (IQR 1–3), p

BackgroundGeriatric trauma patients represent a special challenge in postoperative care and are prone to specific complications. The goal of this study was to analyse the predictive potential of a novel nursing assessment tool, the outcome-oriented nursing assessment for acute care (ePA-AC), in geriatric trauma patients with proximal femur fractures (PFF).MethodsA retrospective cohort study of geriatric trauma patients aged ≥ 70 years with PFF was conducted at a level 1 trauma centre. The ePA-AC is a routinely used tool that evaluates pneumonia; confusion, delirium and dementia (CDD); decubitus (Braden Score); the risk of falls; the Fried Frailty index (FFI); and nutrition. Assessment of the novel tool included analysis of its ability to predict complications including delirium, pneumonia and decubitus.ResultsThe novel ePA-AC tool was investigated in 71 geriatric trauma patients. In total, 49 patients (67.7%) developed at least one complication. The most common complication was delirium (n = 22, 44.9%). The group with complications (Group C) had a significantly higher FFI compared with the group without complications (Group NC) (1.7 ± 0.5 vs 1.2 ± 0.4, p = 0.002). Group C had a significantly higher risk score for malnutrition compared with Group NC (6.3 ± 3.4 vs 3.9 ± 2.8, p = 0.004). A higher FFI score increased the risk of developing complications (odds ratio [OR] 9.8, 95% confidence interval [CI] 2.0 to 47.7, p = 0.005). A higher CDD score increased the risk of developing delirium (OR 9.3, 95% CI 2.9 to 29.4, p < 0.001).ConclusionThe FFI, CDD, and nutritional assessment tools are associated with the development of complications in geriatric trauma patients with PFF. These tools can support the identification of geriatric patients at risk and might guide individualised treatment strategies and preventive measures.

Background and purpose: Cannulated screws are standard implants for percutaneous fixa-tion of posterior pelvis ring injuries. The choice of whether to use these screws in combination with a washer is still undecided. The aim of this study was to evaluate the biomechanical competence of S1-S2 sacroiliac (SI) screw fixation with and without using a washer across three different screw designs. Material and Methods: Twenty-four composite pelvises were used and an SI joint injury type APC III according to the Young and Burgess classification was simulated. Fixation of the posterior pelvis ring was performed using either partially threaded short screws, fully threaded short screws, or fully threaded long transsacral screws. Biomechanical testing was performed under progressively increasing cyclic loading until failure, with monitoring of the intersegmental and bone-implant movements via motion tracking. Results: The number of cycles to failure and the corresponding load at failure (N) were significantly higher for the fully threaded short screws with a washer (3972 ± 600/398.6 ± 30.0) versus its counterpart without a washer (2993 ± 527/349.7 ± 26.4), p = 0.026. In contrast, these two parameters did not reveal any significant differences when comparing fixations with and without a washer using either partially threaded short of fully threaded long transsacral screws, p ≥ 0.359. Conclusions: From a biomechanical perspective, a washer could be optional when using partially threaded short or fully threaded long transsacral S1-S2 screws for treatment of posterior pelvis ring injuries in young trauma patients. Yet, the omission of the washer in fully threaded short screws could lead to a significant diminished biomechanical stability.

Background and Objectives: Minimally invasive surgeries for acetabulum fracture fixation are gaining popularity due to their known advantages versus open reduction and internal fixation. Antegrade or retrograde screw fixation along the long axis of the posterior column of the acetabulum is increasingly applied in surgical practice. While there is sufficient justification in the literature for the application of the anterior approach, there is a deficit of reports related to the posterior approach. The aim of this study was to evaluate the biomechanical competence of posterior column acetabulum fracture fixation through antegrade screw placement using either a standard cannulated screw or a cannulated compression headless screw (CCHS) via posterior approach. Materials and Methods: Eight composite pelvises were used, and a posterior column acetabulum fracture according to the Letournel Classification was simulated on both their left and right sides via an osteotomy. The sixteen hemi-pelvic specimens were assigned to two groups (n = 8) for either posterior column standard screw (group PCSS) or posterior column CCHS (group PCCH) fixation. Biomechanical testing was performed by applying steadily increased cyclic load until failure. Interfragmentary movements were investigated by means of motion tracking. Results: Initial stiffness demonstrated significantly higher values in PCCH (163.1 ± 14.9 N/mm) versus PCSS (133.1 ± 27.5 N/mm), p = 0.024. Similarly, cycles and load at failure were significantly higher in PCCH (7176.7 ± 2057.0 and 917.7 ± 205.7 N) versus PCSS (3661.8 ± 1664.5 and 566.2 ± 166.5 N), p = 0.002. Conclusion: From a biomechanical perspective, CCHS fixation demonstrates superior stability and could be a valuable alternative option to the standard cannulated screw fixation of posterior column acetabulum fractures, thus increasing the confidence in postoperative full weight bearing for both the patient and treating surgeon. Whether uneventful immediate postoperative full weight bearing can be achieved with CCHS fixation should primarily be investigated in further human cadaveric studies with a larger sample size.

Background and Objectives: Pubic ramus fractures are common in compound pelvic injuries known to have an increased rate of morbidity and mortality along with recurrent and chronic pain, impeding a patient’s quality of life. The current standard treatment of these fractures is percutaneous screw fixation due to its reduced risk of blood loss and shorter surgery times. However, this is an intricate surgical technique associated with high failure rates of up to 15%, related to implant failure and loss of reduction. Therefore, the aim of this biomechanical feasibility study was to develop and test a novel intramedullary splinting implant for fixation of superior pubic ramus fractures (SPRF), and to evaluate its biomechanical viability in comparison with established fixation methods using conventional partially or fully threaded cannulated screws. Materials and Methods: A type II superior pubic ramus fracture according to the Nakatani classification was created in 18 composite hemi-pelvises via a vertical osteotomy with an additional osteotomy in the inferior pubic ramus to isolate the testing of three SPRF fixation techniques performed in 6 semi-pelvises each using either (1) a novel ramus intramedullary splint, (2) a partially threaded ramus screw, or (3) a fully threaded ramus screw. Results: No significant differences were detected among the fixation techniques in terms of initial construct stiffness and number of cycles to failure, p ≥ 0.213. Conclusion: The novel ramus intramedullary splint can be used as an alternative option for treatment of pubic ramus fractures and has the potential to decrease the rate of implant failures due to its minimally invasive implantation procedure.

Introduction The Revised Injury Severity Classification II (RISC II) score represents a data-derived score that aims to predict mortality in severely injured patients. The aim of this study was to assess the discrimination and calibration of RISC II in secondary transferred polytrauma patients.Methods This study was performed on the multicentre database of the TraumaRegister DGU. Inclusion criteria included Injury Severity Score (ISS)≥9 points and complete demographic data. Exclusion criteria included patients with ‘do not resuscitate’ orders or late transfers (>24 hours after initial trauma). Patients were stratified based on way of admission into patients transferred to a European trauma centre after initial treatment in another hospital (group Tr) and primary admitted patients who were not transferred out (group P). The RISC II score was calculated within each group at admission after secondary transfer (group Tr) and at primary admission (group P) and compared with the observed mortality rate. The calibration and discrimination of prediction were analysed.Results Group P included 116 112 (91%) patients and group Tr included 11 604 (9%) patients. The study population was predominantly male (n=86 280, 70.1%), had a mean age of 53.2 years and a mean ISS of 20.7 points. Patients in group Tr were marginally older (54 years vs 52 years) and a had slightly higher ISS (21.5 points vs 20.1 points). Median time from accident site to hospital admission was 60 min in group P and 241 min (4 hours) in group Tr. Observed and predicted mortality based on RISC II were nearly identical in group P (10.9% and 11.0%, respectively) but predicted mortality was worse (13.4%) than observed mortality (11.1%) in group Tr.Conclusion The way of admission alters the calibration of prediction models for mortality in polytrauma patients. Mortality prediction in secondary transferred polytrauma patients should be calculated separately from primary admitted polytrauma patients.

Background and Objectives: Following the most recent software and 3D printing developments, the use of personalized 3D printed orthopedic implants for treatment of complicated surgical cases has gained more popularity. Today, orthopedic problems that cannot be solved with standard implants may be effectively addressed using personalized prostheses. The aim of this study is to present the designing, modeling and production stages of four different personalized 3D printed prostheses and their application in clinical cases of patients who underwent treatment in various anatomical locations with a precisely specified indication for implantation. Materials and Methods: Based on computed tomography scanning, personalized 3D printed prostheses were designed, produced and used in four patients within a period of three to five days after injury or admission. Results: Early term follow-ups demonstrated good to excellent results. Conclusions: Personalized 3D printed prostheses offer an opportunity for a treatment of choice and provide good anatomical and functional results, shortened surgical time, less complications, and high satisfaction in patients with appropriate indications. The method should be considered primarily for patients with large bone defects, or such indicated for resection. Personalized 3D printed prostheses have the potential to become more common and beneficial in the future.

Background and Objectives: The treatment of proximal humerus fractures in elderly patients is challenging, with reported high complication rates mostly related to implant failure involving screw cut-out and penetration. Metaphyseal defects are common in osteoporotic bone and weaken the osteosynthesis construct. A novel technique for augmentation with polymethylmethacrylate (PMMA) bone cement was developed for the treatment of patients in advanced age with complex proximal humerus fractures and metaphyseal voids, whereby the cement was allowed to partially cure for 5–7 min after mixing to achieve medium viscosity, and then it was manually placed into the defect through the traumatic lateral window with a volume of 4–6 mL per patient. The aim of this retrospective clinical study was to assess this technique versus autologous bone graft augmentation and no augmentation. Materials and Methods: The outcomes of 120 patients with plated Neer three- and four-part fractures, assigned to groups of 63 cases with no augmentation, 28 with bone graft augmentation and 29 with cement augmentation, were assessed in this study. DASH, CS, pain scores and range of motion were analyzed at 3, 6 and 12 months. Statistical analysis was performed with factors for treatment and age groups, Neer fracture types and follow-up periods, and with the consideration of age as a covariate. Results: DASH and CS improved following cement augmentation at three and six months compared to bone grafting, being significant when correcting for age as a covariate (p ≤ 0.007). While the age group had a significant effect on both these scores with worsened values at a higher age for non-augmented and grafted patients (p ≤ 0.044), this was not the case for cement augmented patients (p ≥ 0.128). Cement augmentation demonstrated good clinical results at 12 months with a mean DASH of 10.21 and mean CS percentage of 84.83% versus the contralateral side, not being significantly different among the techniques (p ≥ 0.372), despite the cement augmented group representing the older population with more four-part fractures. There were no concerning adverse events specifically related to the novel technique. Conclusions: This study has detailed a novel technique for the treatment of metaphyseal defects with PMMA cement augmentation in elderly patients with complex proximal humerus fractures and follow-up to one year, whereby the cement was allowed to partially cure to achieve medium viscosity, and then it was manually placed into the defect through the traumatic lateral window. The results demonstrate clinically equivalent short-term results to 6 months compared to augmentation with bone graft or no augmentation—despite the patient group being older and with a higher rate of more severe fracture patterns. The technique appears to be safe with no specifically related adverse events and can be added in the surgeon’s armamentarium for the treatment of these difficult to manage fractures.

IntroductionImprovements in life expectancy imply that an increase of geriatric trauma patients occurs. These patients require special attention due to their multiple comorbidity issues. The aim of this study was to assess the impact of the implementation of geriatric comanagement (GC) on the allocation and clinical outcome of geriatric trauma patients.MethodsThis observational cohort study aims to compare the demographic development and the clinical outcome in geriatric trauma patients (aged 70 years and older) before and after implementation of a certified geriatric trauma center (GC). Geriatric trauma patients admitted between January 1, 2010 and December 31, 2010 were stratified to group pre-GC and admissions between January 1, 2018 and December 31, 2018 to Group post-GC. We excluded patients requiring end-of-life treatment and those who died within 24 h or due to severe traumatic brain injury. Outcome parameters included demographic changes, medical complexity (measured by American Society of Anaesthesiology Score (ASA) and Charlson Comorbidity Index (CCI)), in-hospital mortality and length of hospitalization.ResultsThis study includes 626 patients in Group pre-GC (mean age 80.3 ± 6.7 years) and 841 patients in Group post-GC (mean age 81.1 ± 7.3 years). Group pre-GC included 244 (39.0%) males, group post-GC included 361 (42.9%) males. The mean CCI was 4.7 (± 1.8) points in pre-GC and 5.1 (± 2.0) points in post-GC (p ConclusionThis study appears to support the implementation of a geriatric trauma center, as certain improvements in the patient care were found: Despite a higher CCI and a higher number of patients with higher ASA classifications, Hospital LOS, complication rates and mortality did were not increased after implementation of the CG. The increase in the case numbers supports the fact that a higher degree of specialization leads to a response by admitting physicians, as it exceeded the expectable trend of demographic ageing. We feel that a larger data base, hopefully in a multi center set up should be undertaken to verify these results.

Facial nerve trauma is a common cause of facial paralysis; both blunt and penetrating forces may compromise the facial nerve. A comprehensive primary and secondary survey is essential for diagnosis and treatment of the injury. Here we report on a young patient who sustained a quad bike accident, leading to an perforating injuries of the face from a bough, causing facial paralysis.

INTRODUCTION:Reconstruction of proximal humerus fracture continues to represent a challenge, especially in severe osteopenia. However, there still is a lack of consensus and clear indication on use of allograft augmentation. Therefore, this study aims to investigate outcome after osteosynthesis with and without allograft augmentation. It focuses on bone density results obtained by DEXA as potential examination that might help decision-making. METHODS:This study included patients aged 65 years and older that were treated at one Level 1 trauma center between 2007 and 2018. Inclusion criteria: Proximal humerus fracture treated with or without allograft, conclusive data-sets. Exclusion criteria: prior surgical treatment of the proximal humerus, open fracture with bone loss, neurological damage. Patients were stratified according to the use of allograft augmentation in two groups: Group NA (no allograft augmented PHILOS) and Group A (PHILOS with allograft augmentation). Comorbidity was assessed using the Charlson Comorbidity Index (CCI). Fractures were graded according to the classification by Neer. Radiographic union was analyzed at 6 weeks, 12 weeks, and at year follow up. Complications include surgical site infection, implant failure, humeral head necrosis, or delayed union. Allograft was used in cases of 1inch/3cm3 bone-loss or an egg-shell situation, where the patient refused arthroplasty. RESULTS:This study included 167 patients, with 143 (85%) in the Group NA, and 24 (15%) in the Group A. There were no significant differences in age, gender, injury distribution, and distribution of Neer classification or CCI. Patients in Group A had significantly lower T-scores preoperatively (-2.87 ± 1.08 versus -0.9 ± 2.12, p = 0.003). No difference occurred in any of the complications. At one-year follow-up, the range of motion was comparable in both groups. CONCLUSION:In patients with allograft augmentation and severe osteopenia, similar clinical and radiological results were obtained when compared with patients with better preoperative bone density scores (T-scores, DEXA). In view of a lack of guidelines indicating the indication for the use of allograft, this difference may be worth further study.

INTRODUCTION:Survival rate after polytrauma increased over the past decades resulting in an increase of long-term complaints. These include physical and psychological impairments. The aim of this study was to describe the prevalence and risk factors for developing depression and anxiety more than twenty years after polytrauma. METHODS:We contacted patients who were treated due to a polytrauma between 1973 and 1990 at one level 1 trauma center after more than 20 years. These patients received a self-administered questionnaire, to assess symptoms of depression and anxiety. Analysis based on multivariable logistic regression models include injury severity and non-injury related factors to determine risk factors associated with the development of depression and anxiety. RESULTS:Patients included in this study (n = 337) had a mean ISS of 20.3 (4 to 50) points. In total, 173 (51.3%) showed psychiatric sequelae (depression n = 163, 48.2%; anxiety n = 14, 4.1%). Injury severity was not associated with the development of depression or anxiety. However, the patients, who required psychiatric therapy prior to the injury had higher risk of developing psychiatric symptoms (OR 1.3, 95%CI 1.1 to 1.8, p = 0.018) as did patients who suffered from additional psychiatric insults after the injury (OR 1.4, 95%CI 1.2 to 2.0, p = 0.049). CONCLUSION:More than half of polytrauma patients developed psychiatric sequelae. Risk factors include mainly non-injury related factors such as psychiatric comorbidities and additional psychiatric insults after the injury.

The purpose of this study was to assess anticoagulant medication as an independent factor influencing the occurrence of a severe traumatic brain injury in geriatric patients. Data were collected from the TraumaRegister DGU® between January 2015 and December 2018. We included patients with an age of ≥65 years with a blunt TBI; an AISHead ≥2 but no other relevant injuries. Patients were divided into five subgroups: no anticoagulant medication, anti-platelet drugs, vitamin K antagonists, direct-oral-anticoagulants, and heparinoids. Separation between moderate TBI (AISHead 2–3) and severe TBI (AISHead ≥ 4) and multivariable regression analysis were performed. The average age of 10,559 included patients was 78.8 years with a mean ISS of 16.8 points and a mortality of 22.9%. The most common cause of injury was a low fall of