Search

Supramolecular chemistry with its unique properties has received considerable attention in many fields. This paper summarizes recent advances in the supramolecular fluorescence systems based on host–guest interactions and their bio-applications.

Early diagnosis and therapy are clinically crucial in decreasing mortality from breast carcinoma. However, the existing probes have difficulty in accurately identifying the margins and contours of breast carcinoma due to poor sensitivity and specificity. There is an urgent need to develop high-sensitive fluorescent probes for the diagnosis of breast carcinoma and for differentiating tumors from normal tissues during surgery. β-Galactosidase is a significant biomarker, whose overexpression is closely associated with the progression of breast tumors. Herein, we have constructed a β-galactosidase-activated fluorescent probe

Developing dual-state luminophores (DSLs) with strong fluorescence in both the monomer and aggregate states is urgently needed but remains a huge challenge because most current luminophores are eit...

In situ imaging of biological indicators is imperative for pathological research by utilizing an activatable photoacoustic (PA) probe. However, precise imaging in actual applications is hampered by the inevitable poor accumulation and low sensitivity. Herein, an amphiphilic molecular probe (

Rhodamine dyes have been widely employed in biological imaging and sensing. However, it is always a challenge to design rhodamine derivatives with huge Stokes shift to address the draconian requirements of single-excitation multicolor imaging. In this work, we described a generally strategy to enhance the Stokes shift of rhodamine dyes by completely breaking their electronic symmetry. As a result, the Stokes shift of novel rhodamine dye DQF-RB-Cl is up to 205 nm in PBS, which is the largest in all the reported rhodamine derivatives. In addition, we successfully realized the single excitation trichromatic imaging of mitochondria, lysosomes and cell membranes by combining DQF-RB-Cl with commercial lysosomal targeting probe Lyso-Tracker Green and membrane targeting dye Dil. This is the organic synthetic dyes for SLE-trichromatic imaging in cells for the first time. These results demonstrate the potential of our design as a useful strategy to develop huge Stokes shift fluorophore for bioimaging.

Effective monitoring of the physiological progression of acute lung injury (ALI) in real time is crucial for early theranostics to reduce its high mortality. In particular, activatable fluorescence and photoacoustic molecule probes have attracted attention to assess ALI by detecting related indicators. However, the existing fluorophores often encounter issues of low retention in the lungs and slow clearance from the body, which compromise the probe's actual capability for in situ imaging by intravenous injection in vivo. Herein, a novel near-infrared hemicyanines fluorophore (

The second near-infrared (NIR-II) fluorescent imaging shows great potential for deep tissue analysis at high resolution in living body owing to low background autofluorescence and photon scattering. However, reversible monitoring of redox homeostasis using NIR-II fluorescent imaging remains a challenge due to the lack of appropriate probes. In this study, a series of stable and multifunctional NIR-II dyes (NIR-II Cy3s) were constructed based on trimethine skeleton. Significantly, introducing the 1,4-diethyl-decahydroquinoxaline group to the NIR-II Cy3s not only effectively increased the wavelength, but also served as an effective response site for HClO, which can be restored by reactive sulfur species (RSS). Based on this, NIR-II Cy3s were used for reversible monitoring of HClO/RSS-mediated redox processes in the pathophysiology environment. Finally, NIR-II Cy3-988 was successfully utilized for assessment of the redox environments and drug treatment effects in acute inflammation model.

Tumor-specific, hypoxia-activated prodrugs have been developed to alleviate the side effects of chemotherapy drugs. However, the release efficiency of hypoxia-activated prodrugs is restricted by the degree of tumor hypoxia, which further leads to poor cancer treatment effects. On the other hand, oxygen is consumed gradually in photodynamic therapy (PDT), which aggravates hypoxia at the tumor site. In this study, we combined hypoxia-activated prodrugs with PDT agents to promote the prodrugs release, thereby improving their bioavailability and therapeutic effects. As a proof of concept, a mitochondria-targeted molecular prodrug, CS-P, was designed and synthesized. It can be selectively activated by tumor hypoxia to release chemotherapeutic drugs and photosensitizers, and then further discharge drugs after light irradiation. The design strategy proposed in this paper provides a new idea for enhancing hypoxia-activated prodrug release and real-time monitoring prodrug release.

Tumor-specific imaging is a major challenge in clinical tumor resection. To overcome this problem, several activatable probes have been developed for use in tumor imaging. However, most of these probes are activated based on a single-factor stimulation and are irreversible. Therefore, false signals that make tumor-specific imaging difficult are easily generated. We have developed a new dual-stimulus responsive near-infrared (NIR) reversible adenosine 5'-triphosphate (ATP)-pH probe for fluorescence and photoacoustic ratiometric imaging of tumors. Since the H+ and ATP content is significantly higher in the tumor microenvironment than that in normal tissues, the Forster resonance energy transfer-based probe ATP-pH was constructed with silicon rhodamine as the donor, CS dye as the acceptor, and ATP/H+ recognition units that could only be activated when both H+ and ATP were connected to the acceptor. The ATP-pH probe is reversibly activated by both the H+ and ATP, which effectively reduces the cumulative response of the probe in circulation after intravenous injection. Further, the NIR ratiometric property of the probe makes it suitable for in vivo imaging. Finally, our probe was successfully utilized in ratiometric photoacoustic and fluorescence tumor imaging and ratiometric fluorescence imaging-guided tumor resection.

Mitochondria-targeted fluorescent probes are highly important to obtain mitochondrial function information. However, the accuracy of the current mitochondria-targeted fluorescent probes is unsatisfactory owing to the following two reasons. In the first case, some probes that always have a mitochondria-targeting group, thus, would react with the analytes outside of mitochondria and enter mitochondria with the generated fluorophore signal, which leads to a false-positive result. In the other case, after response to the analytes in mitochondria, some probes could diffuse from mitochondria to other organelles, thus triggering a false-negative result. To avoid the two problems, herein, we develop a precipitated fluorophore-based probe, which precipitates in situ after reacting with analytes, for the accurate detection of mitochondrial analytes. The probe was modified with HQPQ, a novel solid-state fluorophore that is insoluble in water. As a proof of concept, we designed and synthesized a probe (HQPQ-B) for H2O2 detection. Based on the different mitochondria-targeting capacities of quinoline salts and quinolone, HQPQ loses the mitochondria-targeting ability after reacting with analytes outside of mitochondria, thus avoiding a false-positive result. On the contrary, when the probe first localized in mitochondria and then reacted with analytes, HQPQ would precipitate and remain in mitochondria without diffusing to other sites, thus avoiding a false-negative result. Therefore, HQPQ enables the accurate detection of mitochondrial analytes. We believe that the novel strategy based on HQPQ will be a general strategy for accurate detection of mitochondrial analytes without interference from other sites, which enables an accurate study on mitochondrial function.

Effective monitoring of liver hypoxia status is crucial for the detection and treatment of drug-induced liver injury. Here, a novel photoacoustic and fluorescent dual-modal probe (NO2-CS) was rationally developed and applied to image isoniazid-induced liver hypoxia through detecting the over-expressed nitroreductase.

Organic dye based NIR-II fluorescent probes, owing to their high signal-to-background ratio and deeper penetration, are highly useful for deep-tissue high-contrast imaging in vivo. However, it is still a challenge to design activatable NIR-II fluorescent probes. Here, a novel class of polymethine dyes (NIRII-RTs), with bright (quantum yield up to 2.03 %), stable, and anti-solvent quenching NIR-II emission, together with large Stokes shifts, was designed. Significantly, the novel NIR-II dyes NIRII-RT3 and NIRII-RT4, equipped with a carboxylic acid group, can serve as effective NIR-II platforms for the design of activatable bioimaging probes with high contrast. As a proof of concept, a series of target-activatable NIRII-RT probes (NIRII-RT-pH, NIRII-RT-ATP and NIRII-RT-Hg) for pH, adenosine triphosphate (ATP), and metal-ion detection, were synthesized. By applying the NIRII-RT probe, the real-time monitoring of drug-induced hepatotoxicity was realized.

Fluorescent probes have been widely employed in biological imaging and sensing. However, it is always a challenge to design probes with high sensitivity. In this work, based on rhodamine skeleton, we developed a general strategy to construct sensitivity-enhanced fluorescent probe with the help of theoretical calculation for the first time. As a proof of concept, we synthesized a series of HOCl probes. Experiment results showed that with the C-9 of pyronin moiety of rhodamine stabilized by an electron donor group, probe DQF-S exhibited an importantly enhanced sensitivity (LOD: 0.2 nmol/L) towards HOCl together with fast response time ( 650 nm) and large Stokes shift. Bioimaging studies indicated that DQF-S can not only effectively detect basal HOCl in various types of cells, but also be successfully applied to image tumor tissue in vivo. These results demonstrate the potential of our design as a useful strategy to develop excellent fluorescent probes for bioimaging.

Fluorescent probes have been powerful tools for visualizing and quantifying multiple dynamic processes in living cells. However, the currently developed probes are often constructed by conjugation a fluorophore with a recognition moiety and given signal-output after triggering with one singly target interest. Compared with the single-target-activated fluorescent probes mentioned above, the dual-target-activated ones, triggering with one target under stimulus (such as photoirradiation, microenvironment) or another targets, have the advantages of advoiding nonspecific activation and "false positive" results in complicated environments. In recent years, many dual-target-activated fluorescent probes have been developed to detect various biologically relevant species. In view of the importance of a comprehensive understanding of dual-target- activated fluorescent probes, a thorough summary of this topic is urgently needed. However, no comprehensive and critical review on dual target activated fluorescent probes has been published recently. In this review, we focus on the dual-target-activated fluorescent probes and briefly outline their types and current state of development. In each type, the chemical structure, proposed responsive mechanism and application of probes are highlighted. At last, the challenges and prospective opportunities of every type were proposed.

As an organelle in cells, lysosomes play an important role in the degradation of biological macromolecules and pathogens. To elucidate the function of lysosomes in normal or disease states, recently, various fluorescent probes have been reported for imaging lysosomal analytes. However, because of the particularity of the lysosomal environment, most of the reported lysosomal fluorescent probes suffered from a series of practical issues such as easy diffusion, low detection signal-to-background ratio and false signal. To address these issues, based on an optimized in situ ordered assembly solid-state fluorophore HDPQ, we herein put forward a new strategy for the design of lysosomal enzymes probes. As a proof concept, we synthesized a fluorescent probe HDPQ-GLU for lysosomal enzyme β-glucuronidase (GLU). Experiment results displayed that compared with general lysosomal probe, the novel lysosomal probe not only exhibited excellent anti-pH interference ability and high signal-to-noise ratio in aqueous solution, but also has excellent long-term in situ imaging ability in the living system. Using this probe, we have realized high-fidelity and long-term in situ tracking GLU in lysosomes of living cells and evaluated the dynamic changes of GLU during the growth period of zebrafish. We anticipate that the new strategy based on the novel in situ ordered assembly solid-state fluorophore HDPQ may be a potential platform for developing fluorescent probes for high-fidelity imaging of lysosomal enzymes.

Small-molecule-based second near-infrared (NIR-II) activatable fluorescent probes can potentially provide a high target-to-background ratio and deep tissue penetration. However, most of the reported NIR-II activatable small-molecule probes exhibit poor versatility owing to the lack of a general and stable optically tunable group. In this study, we designed NIRII-HDs, a novel dye scaffold optimized for NIR-II probe development. In particular, dye NIRII-HD5 showed the best optical properties such as proper pK

We report here an activatable chemiluminescent probe CL-O3 for the high-contrast imaging of O3in vivo.

The cyanine fluorophores, a kind of classic organic fluorophores, are famous for their high extinction coefficient, simple synthetic route, and relatively long absorption and emission wavelengths. Moreover, the excellent biocompatibility and low toxicity in biological samples make cyanine fluorophores show excellent application value in the biomedical field, especially in Near-Infrared II (NIR-II) sensing and imaging. In this review, we briefly outline the history, characteristics, and current state of development of cyanine fluorophores. In particular, we described the application of cyanine fluorophores in NIR-II sensing and imaging. We hope this review can help researchers grab the latest information in the fast-growing field of cyanine fluorophores for NIR-II sensing and imaging.

With the increasing interest in photodynamic therapy (PDT), the assessment of the level of reactive oxygen species produced during PDT has also become increasingly important. However, most of the fluorescent probes for reactive oxygen species (ROS) evaluation were separated from photosensitizers in the PDT process, resulting in

Developing chemiluminescence probe with a slow kinetic profile, even a constant emission within analytical time, would improve the analytical sensitivity, but still remains challenging. This work reports a novel strategy to afford long-lasting in vivo imaging by developing a self-assembled chemiluminophore HPQCL-Cl via the introduction of the hydrogen-bond-driven self-assembled dye HPQ to Schaap's dioxetane. Compared with classical chemiluminophore HCL, self-assembled HPQCL-Cl was isolated from the physiological environment, thereby lowering its deprotonation and prolonging its half-life. Based on HPQCL-Cl, the long-lasting in vivo imaging of 9L-lacz tumor was achieved by developing a β-gal-responsive probe. Its signals remained constant (5% change) for about 20 min, which may provide a wide time window for the determination of β-gal. This probe also showed high tumor-to-normal tissue ratio throughout tumor resection, highlighting its potential in image-guided clinical surgery.

Fluorescent organic dyes have been extensively used as raw materials for the development of versatile imaging tools in the field of biomedicine. Particularly, the development of solid-state organic fluorophores (SSOFs) in the past 20 years has exhibited an upward trend. In recent years, studies on SSOFs have focused on the development of advanced tools, such as optical contrast agents and phototherapy agents, for biomedical applications. However, the practical application of these tools has been hindered owing to several limitations. Thus, in this Perspective, we have provided insights that could aid researchers to further develop these tools and overcome the limitations such as limited aqueous dispersibility, low biocompatibility, and uncontrolled emission. First, we described the inherent photophysical properties and fluorescence mechanisms of conventional, aggregation-induced emissive, and precipitating SSOFs with respect to their biomedical applications. Subsequently, we highlighted the recent development of functionalized SSOFs for bioimaging, biosensing, and theranostics. Finally, we elucidated the potential prospects and limitations of current SSOF-based tools associated with biomedical applications.

Two-photon (TP) imaging with a donor-acceptor (D-A) type fluorophore is an emerging tool for bioimaging and sensing. However, current TP probes suffer from serious solvatochromic quenching in aqueous solution due to their strong intramolecular charge transfer (ICT) in excited states. In this work, based on solvatochromism reversal, we report a novel strategy to develop TP probes for bioimaging. Specifically, compared with the normal two-photon probes that showed a fluorescence off with ICT suppressed, the novel probes exhibited strong fluorescence in the aqueous solution when their ICT was inhibited. This strategy not only provides a new way for the design of high-performance TP probes, but also expands the biological analysis toolbox for use in living systems.

Fluorescent probes have become an indispensable tool in the detection and imaging of biological and disease-related analytes due to their sensitivity and technical simplicity. In particular, fluorescent probes with far-red to near-infrared (FR-NIR) emissions are very attractive for biomedical applications. However, many available FR-NIR fluorophores suffer from small Stokes shifts and sometimes low quantum yields, resulting in self-quenching and low contrast. In this work, we describe the rational design and engineering of FR-NIR 2,4,6-triphenylpyrylium-based fluorophores (TPP-Fluors) with the help of theoretical calculations. Our strategy is based on the appending of electron-donating substituents and fusing groups onto 2,4,6-triphenylpyrylium. In contrast to the parent TPP with short emission wavelength, weak quantum yields, and low chemical stability, the obtained novel TPP-Fluors display some favorable properties, such as long-wavelength emission, large Stokes shifts, moderate to high quantum yields, and chemical stability. TPP-Fluors demonstrate their biological value as mitochondria-specific labeling reagents due to their inherently positive nature. In addition, TPP-Fluors can also be applied to develop ratiometric fluorescent probes, as the electron-donating ability of the 2,6-phenyl substituents is closely correlated with their emission wavelength. A proof-of-concept ratiometric probe has been developed by derivatizing the amino groups of TPP-Fluor for the detection and imaging of nitroreductase in vitro and in hypoxic cells.

The quality and application of super-resolution fluorescence imaging greatly lie in the properties of fluorescent probes. However, conventional fluorophores in a cellular environment often suffer from low brightness, poor photostability, and short Stokes shift (BDQF-6 exhibits around twofold greater brightness (ε × Φ = 6.6 × 104 L·mol− 1·cm− 1) and Stokes shift (56 nm) than its parental fluorophore, Rhodamine B. Importantly, in Stimulated Emission Depletion (STED) microscopy, BDQF-6 derived probe possesses a superior photostability and thus renders threefold more frames than carbopyronine- and JF608-based probes, known as photostable fluorophores for STED imaging. More BDQF-6 derivatives were developed next, allowing us to perform wash-free organelles (mitochondria and lysosome) staining and protein labeling with ultrahigh signal-to-noise ratios (up to 106 folds) in confocal and STED microscopy of live cells, or two-photon and 3D STED microscopy of fixed cells. Furthermore, the strategy was well generalized to different types of dyes (pyronin, rhodol, coumarin, and Boranil), offering a new class of bright and photostable fluorescent probes with long Stokes shift (up to 136 nm) for bioimaging and biosensing.

Cell membrane-targeted bioimaging is a prerequisite for studying the roles of membrane-associated biomolecules in various physiological and pathological processes. However, long-term in situ bioimaging on the cell membrane with conventional fluorescent probes leads to diffusion into cells from the membrane surface. Therefore, we herein proposed a de novo strategy to construct an antidiffusion probe by integrating a fluorochrome characterized by strong hydrophobicity and low lipophilicity, with an enzyme substrate to meet this challenge. This precipitating fluorochrome HYPQ was designed by conjugating the traditionally strong hydrophobic solid-state fluorochrome 6-chloro-2-(2-hydroxyphenyl) quinazolin-4(3H)-one (HPQ) with a 2-(2-methyl-4H-chromen-4-ylidene) malononitrile group to obtain closer stacking to lower lipophilicity and elongate emission to the far-red to near-infrared wavelength. As proof-of-concept, the membrane-associated enzyme γ-glutamyltranspeptidase (GGT) was selected as a model enzyme to design the antidiffusion probe HYPQG. Then, benefiting from the precipitating and stable signal properties of HYPQ, in situ imaging of GGT on the membrane was successfully realized. Moreover, after HYPQG was activated by GGT, the fluorescence signal on the cell membrane remained unchanged, with incubation time even extending to 6 h, which is significant for in situ monitoring of enzymatic activity. In vivo testing subsequently showed that the tumor region could be accurately defined by this probe after long-term in situ imaging of tumor-bearing mice. The excellent performance of HYPQ indicates that it may be an ideal alternative for constructing universal antidiffusion fluorescent probes, potentially providing an efficient tool for accurate imaging-guided surgery in the future.

Elevated levels of intracellular hydrogen peroxide (H2O2) are closely related to the development of cancers. Specific imaging of H2O2 in tumor sites would be significant not only for cancer diagnosis but also for gaining a deep understanding of the role of H2O2 in cancer. However, traditional fluorescent probes based only on responses to overexpression levels of H2O2 in cancer cells are insufficient to distinguish cancer cells from other unhealthy or healthy cells in complex biological systems. Herein, we developed a smart, two-photon fluorescent GC-NABP nanoprobe with pH-dependent surface charge conversion for tumor-targeted imaging of H2O2. The nanoprobe was constructed by the self-assembly of amphiphilic GC-NABP, which was synthesized by grafting the hydrophobic, H2O2-responsive and two-photon fluorophore, NABP, onto hydrophilic biopolymer glycol chitosan (GC). Taking advantage of pH-titratable amino groups on GC, the nanoprobe had the capability of surface charge conversion from negative at physiologic pH to positive in the acidic tumor microenvironment. The positive charge of the nanoprobe promoted electrostatic interactions with cell membranes, leading to enhanced cellular uptake in acidic environment. Upon cellular uptake, the high level of H2O2 in tumor cells triggered boronate deprotections of the nanoprobe, generating a "turn-on" fluorescence emission for H2O2 imaging. The nanoprobe exhibited good sensitivity and selectivity to H2O2 with a detection limit down to 110 nM in vitro. The results from flow cytometry and two-photon fluorescence imaging of H2O2 in living cells and tissues evidenced the enhanced cellular uptake and targeted imaging of intracellular H2O2 in acidic environment. Compared to control nanoparticles that lack pH sensitivity, our nanoprobe showed enhanced accumulation in tumor sites and was applied to targeted imaging of H2O2 in a tumor-bearing mouse model. This work demonstrates that the nanoprobe GC-NABP holds great promise for tumor-specific imaging of cellular H2O2, providing a potential tool to explore the role of H2O2 in tumor sites.

A new strategy that integrates the targeting group and response moiety together for the preparation of mitochondrial probe was developed. Bioimaging studies have shown that for the first time, the newly designed probe HDFL-Cys can first accumulate in mitochondria and then react with the analyte., Mitochondria are vital organelles that not only produce cellular energy but also participate in many biological processes. Recently, various fluorescent probes have been developed for mitochondrial imaging. However, due to the lack of suitable dyes or strategies, it is difficult for most reported mitochondrial targeting probes to prove whether the analytes they detected are from mitochondria. In addition, positive charge on mitochondrial probes can seriously affect the mitochondrial environment. To address these issues, we herein put forward a novel strategy for probe design based on a smart NIR dye (HDFL) for mitochondrial targeting detection. Compared to general mitochondrial targeting probes that are modified with a target site and a reaction site, the new strategy is to combine the two sites together for a mitochondrial probe that would provide accurate detection of analytes in mitochondria without interference. As a proof of concept, we synthesized a mitochondrial-targetable probe HDFL-Cys for cysteine. Bioimaging studies have shown that the new type of probe HDFL-Cys can first accumulate in mitochondria and then react with the analyte (cysteine) accompanied by the departure of the targeting group (lipophilic cation moieties). Thus, it can specifically detect the analyte in mitochondria without interference from extra-mitochondrial analytes. We anticipate that the new strategy based on the novel NIR dye HDFL may be a potential platform for developing desirable ratiometric fluorescent probes for mitochondrial imaging.

Fluorescent materials are widely employed in biological analysis owing to their biorthogonal chemistries for imaging and sensing purposes. However, it is always a challenge to design fluorophores with desired photophysical and biological properties, due to their complicated molecular and optical nature. Inspired by anthocyanidin, a class of flower pigments, we designed a new fluorescent molecular framework, AC-Fluor. The new fluorescent materials can be rationally engineered to produce a broad range of fluorescent scaffolds with flexibly tunable emission spectra covering the whole visible light range, from 467 to 707 nm. Furthermore, they exhibit unprecedented environment-insensitive two-photon properties with a substantial cross section as large as 1100 GM in aqueous solution. AC-Fluors demonstrate their biological values through two-photon deep tissue imaging, with penetration depths as much as 300 μm, while exhibiting minimal cytotoxicity. These features engender a rational engineering strategy for the design and optimization of new fluorescent materials for biological imaging.

Real-time imaging and quantification of adenosine triphosphate (ATP) fluctuation in cells are significant for understanding the relationship between energy metabolism and cell functions. However, few synthetic fluorescent probes have been reported to tackle this challenge due to lack of accurate fluorescence readout and suitable response concentration. Herein we designed and synthesized a ratiometric fluorescent probe (Rh6G-ACFPN) for quantitatively detecting the fluctuation of mitochondrial ATP in living cells. Rh6G-ACFPN selectively and reversibly responds to ATP with an ideal dissociation constant (Kd) of 4.65 mM (3-10 mM: the range of mitochondrial ATP concentrations). Live-cell imaging allows us to directly monitor the dynamic changes of mitochondrial ATP in high temporal resolution. Moreover, for the first time, mitochondrial ATP in normal and cancer cells lines was successfully quantified and discriminated. These results demonstrate the versatility of Rh6G-ACFPN as a useful imaging tool to elucidate the function of mitochondrial ATP in living cells.

Herein, we report a pH stimulus-disaggregated BODIPY sensitizer (PTS) with low background-toxicity for achieving activated photodynamic/photothermal tumor therapy. Both the photodynamic and photothermal properties of PTS can be activated under acidic conditions, and PTS exhibits excellent antitumor properties, which is revealed by both in vitro and in vivo tests.

Fluorescence molecular imaging has attracted increasing attention due to its various advantages. Lots of fluorophores have been developed to meet various molecular imaging needs. However, it is still inconvenient due to the lack of excellent fluorophores with an optically tunable group for biological molecular imaging. Here a new platform of a versatile long wavelength fluorophore with an optically tunable hydroxyl group was successfully developed by regulating molecular planarity and the twisted intramolecular charge transfer effect with a protected and deprotected hydroxyl group approach via "step by step" modifying strategy. As an excellent representative of this new type of fluorophore, LDOH-4 possesses good chemical and optical properties and shows a potential application prospect. As a proof-of-concept, a nitroreductase-activated TP fluorescent probe LDO-NTR was designed, which not only sensitively recognizes NTR with more than 310-fold response signal enhancement in vitro but also tracks NTR in a hypoxia tumor mouse model in vivo by using two-photon imaging. It is hopeful that the long wavelength fluorophore with the optically tunable hydroxyl group can serve as a useful platform to extend capable detection tools in biological chemistry and biomedical applications.

We report here a single-benzene based fluorescent framework, amino-terephthalonitrile, denoted SB-Fluor. This scaffold displays versatile emission wavelength tunability via structure modification, covering the full visible light spectrum, both in the solution and solid state. Moreover, one molecule, SBF3, exhibits polymorphism-dependent reversible mechanochromic luminescence.

The novel ratiometric fluorescent probe HPQRB with an ESIPT effect based on Michael addition for highly sensitive and fast detection of sulfite in living HepG2 cells is reported. HPQRB can be easily synthesized by a two‐step condensation reaction. HPQRB has a large emission shift (Δλ=116 nm), which is beneficial for fluorescence imaging research, and its sulfite‐responsive site is based on a rhodamine‐like structure with the emission peak at 566 nm, which decreases with increasing sulfite concentration. and its HPQ structure always has an ESIPT effect throughout the reaction process, keeping the emission peak at 450 nm as a self‐reference. In particular, HPQRB has high selectivity for sulfite and responds quickly (within 30 s) with a low detection limit (44 nM). Furthermore, HPQRB has been successfully used for fluorescence imaging of sulfite in HepG2 cells, demonstrating the superior ability to detect sulfite under physiological conditions.

Summary: Electron donor-acceptor (D-A)-type molecules are the most widely employed two-photon scaffolds. Unfortunately, current D-A-type fluorophores suffer from serious solvent-dependent emission wavelength and brightness, thwarting their use for high-fidelity imaging in complicated biological systems. Herein, with single-atom replacement and acceptor fusing in acedan (6-acetyl-2-(dimethylamino)naphthalene), we devise a new class of D-A type fluorophore (TPQL dyes). Our design results in TPQL fluorophores with a slight emission redshift (ΔλTPQL1 < 32 nm versus ΔλAcedan-NH2 = 91 nm) and high brightness (εΦTPQL1 = 7,600 to 6,923 versus εΦAcedan-NH2 = 7,372 to 1,314) in different solvent systems. Such features not only provide bright and unbiased fluorescent images of TPQL fluorophores in the cell but also bring deeper tissue penetration and greater signal-to-background ratios in tissue. As a proof-of-concept demonstration, using probe TPQL-N3 and TPQL-APN, we monitor the dynamic changes of H2S and APN during zebrafish liver development with high fidelity to the best of our knowledge.

An effective procedure for the synthesis of $\alpha $-hydroxyphenylacetic acid with cyclodextrin (CD) catalysts was developed. The phase-transfer catalyst types, catalyst loadings, reaction times, reaction temperatures, and substrate molar ratios were investigated to optimize the reaction conditions. In addition, the factors that affect the reaction were studied, and the relationship between benzaldehyde and $\beta $-cyclodextrin ($\beta $-CD) was analyzed through 2D-ROESY. The equilibrium constant when $\beta $-CD was used as the catalyst was calculated. The results indicated that $\beta $-CD is the optimal catalyst for the reported reaction (yield: 69.08%). Furthermore, the mechanism underlying the reported reaction was proposed.

Functional group substituted 1-naphthylamines, especially N-methylated ones, play important roles in numerous chemical and biological processes. However, these compounds' general and step-economic syntheses are highly limited, which seriously restricts efforts to improve the properties and develop new functions for this kind of compound. In this report, we describe the development of an efficient, convenient, and general method for the synthesis of valuable functionalized 1-naphthylamines directly from readily available terminal alkynes, 2-bromoaryl ketones, and amides via Cu(I)-catalyzed benzannulation in a green solvent (i.e., water) under Pd- and ligand-free conditions. A total of 82 functionalized 1-naphthylamines, especially synthetically and biologically useful N-methylated compounds, are synthesized in isolated yields up to 95%. Some unique features of the reaction are as follows: (1) exclusive 6 -endo-dig selectivity, (2) ready incorporation of a broad range of functional groups directly from easily available substrates, and (3) amides that can be used as aminating agents and that are excellent alternatives to toxic and/or odorous amines. Due to facile tuning of functional groups for the reaction, the products possess good electronic donor-acceptor structures and exhibit intriguing photophysical properties, such as tunable and polarity-sensitive fluorescence emission and large Stokes shifts (up to 258 nm). Utilizing the products' unique polarity-sensitive fluorescence response, we successfully applied the 1-naphthylamine derivatives, such as compound 91, to image lipid droplets (LDs) and monitor cellular LDs growth. The previously mentioned advantages of this methodology, along with the mild conditions, simple operation, and scalable synthesis, may allow this novel reaction to be extended to varied applications in chemistry, biology, and materials science.