Search

Fatigue damage can occur in surface rock engineering due to various factors, including earthquakes, blasting, and impacts. The underlying cause for the variations in physical and mechanical properties of the rock resulting from impact loading is the alteration in the internal pore structure. To investigate the evolution characteristics of the pore structure under impact fatigue damage, red sandstone subjected to cyclic impact compression by split Hopkinson pressure bar (SHPB) was analyzed using nuclear magnetic resonance (NMR) technology. The parameters describing the evolution of pore structure were obtained and quantified using fractal methods. The development of the pore structure in rocks subjected to cyclic impact was quantitatively analyzed, and two fractal evolution models based on pore size and pore connectivity were constructed. The results indicate that with an increasing number of impact loading cycles, the porosity of the red sandstone gradually increases, the T2 cutoff (T2c) value decreases, the most probable gray value of magnetic resonance imaging (MRI) increases, the pores' connectivity is enhanced, and the fractal dimension decreases gradually. Moreover, the pore distribution space tends to transition from three-dimensional to two-dimensional, suggesting the expansion of dominant pores into clusters, forming microfractures or even macroscopic fissures. The findings provide valuable insights into the impact fatigue characteristics of rocks from a microscopic perspective and contribute to the evaluation of time-varying stability and the assessment of progressive damage in rock engineering. [ABSTRACT FROM AUTHOR]

The response characteristics of the mesostructure and macro-characteristics of the soil–rock mixture under repeated freeze–thaw action have an important influence on the safety and stability of the dump slope in low-temperature environments. In order to further understand the multi-scale response behavior of a soil–rock mixture under freeze–thaw cycles, this paper carried out indoor freeze–thaw cycles, uniaxial compression, and electrochemical impedance spectroscopy tests on a soil–rock mixture taken from a graphite mine dump in Jixi City, Heilongjiang Province, China. Combined with the simulation calculation of discrete element numerical software (PFC2D 7.0), the effects of freeze–thaw cycling on electrochemical impedance spectrometry (EIS) mesoscopic parameters, uniaxial compressive strength, and crack propagation of soil–rock mixtures were analyzed. The intrinsic relationship between mesoparameters and macroscopic mechanical properties was established. The results showed that as the number of freeze–thaw cycles increases from 0 to 15, the mesopores inside the soil–rock mixture gradually increase, and the angular similarity of distribution characteristics increases by 5.25%. The uniaxial compressive strength and the peak secant modulus increase exponentially with the increase in the number of freeze–thaw cycles, the uniaxial compressive strength decreases by 47.62%, and the peak secant modulus decreases by 75.87%. The peak strain and pore compaction stage showed an exponential increase and an increasing trend, respectively, and the peak strain increased from 2.115% to 4.608%. The failure mode was basically similar in different cycles; the failure cracks extended from the corners to the middle and lower parts before the failure finally occurred. The types of failure cracks were mainly tensile cracks, followed by tensile shear cracks and the fewest compression shear cracks. The similarity and uniaxial compressive strength conformed to a good linear relationship with the number of freeze–thaw cycles, with the uniaxial compressive strength decreasing linearly with the increase in similarity. [ABSTRACT FROM AUTHOR]