Search

This article provides a brief overview of the tools and methods that may be useful to assess neuropathic trigeminal pain. Pain is a complex multidimensional and biopsychosocial experience. While the assessment of neuropathic trigeminal pain is complex, there are several meaningful ways available for the systematic assessment of neuropathic pain and its effects and manifestations. The key to such an analysis is a standardized pain history and examination and a good knowledge of pain mechanisms. Patients can be asked to provide detailed information about their spontaneous pain (ie, stimulus-independent pain), eg, quality, intensity, localization, time course, and modifying factors. Stimulus-dependent pain components can be characterized with clinical examination procedures and quantitative psychophysical techniques such as application of mechanical, thermal, chemical, and electrical stimuli. The description of the stimulus-dependent pain is important to reveal the function of the somatosensory system and to map the extent of hyperalgesia, hyperesthesia and allodynia, because the normal relationship between stimulus intensity and perceived intensity is distorted in many neuropathic pain conditions. In addition to the psychophysical techniques, a number of laboratory tests for assessment of trigeminal pain have been developed and tested, although critical information on sensitivity, specificity, and predictive values is still scarce. There is also a need for common guidelines on classification, diagnostic procedures, and management. This will require concerted international, interdisciplinary action. [ABSTRACT FROM AUTHOR]

Skull surgery, also known as craniectomy, is done to treat trauma or brain diseases and may require the use of an implant to reestablish skull integrity. This study investigates the performance of 3D printed bone implants in a mouse model of craniectomy with the aim of making biodegradable porous implants that can ultimately be fitted to a patient's anatomy. A nonpolymeric thermoplastic bioink composed of fatty acids and β-tricalcium phosphate was used to 3D print the skull implants. Some of these were sintered to yield pure β-tricalcium phosphate implants. The performance of nonsintered and sintered implants was then compared in two semi-quantitative murine calvarial defect models using computed tomography, histology, and luciferase activity. Both types of implants were biocompatible, but only sintered implants promoted defect healing, with osseointegration to adjacent bone and the formation of new bone and bone marrow tissue in the implant pores. Luciferase scanning and histology showed that mesenchymal stem cells seeded onto the implants engraft and proliferate on the implants after implantation and contribute to forming bone. The experiments indicate that fatty acid-based 3D printing enables the creation of biocompatible and bone-forming β-tricalcium phosphate implants., (© 2020 John Wiley & Sons, Ltd.)

Purpose: Complex orbital fractures can be surgically challenging because the orbital cavity contains several vital anatomic structures and visibility is limited. We present a case in which computer-aided surgical simulation (CASS), surgical navigation (SN), and a patient-specific implant (PSI) were used. Furthermore, the reported data regarding this topic were systematically searched and investigated., Patients and Methods: A patient with a complex, failed orbital reconstruction was referred to our department. Despite the use of advanced tools, including a preformed PSI using a 1:1 mirrored, individual 3-dimensional model, several challenges remained. A systematic search of the relevant databases, scientific journals, and bibliographies of the included reports was conducted. Clinical studies involving CASS and SN in the treatment of at least 5 patients reported between 2016 and 2018 were included., Results: The final reconstruction was planned virtually, and a milled PSI was produced and implanted under guidance of SN. The clinical outcome was acceptable to the patient. The literature search showed that superior results can be obtained when CASS and SN are involved in the treatment regimen. The average technical accuracy for SN has been reported to be less than 1 mm, and volume restoration has been reported to be significantly superior to that achieved with traditional methods., Conclusions: New technological advancements such as CASS involving SN seem to improve the outcomes of orbital reconstruction, especially in complex cases. Furthermore, planning, execution, and evaluation will be facilitated. Real-time guidance can also be used as a training tool for novice surgeons; however, factors such as financial investments, challenges in implementation, and a steep learning curve must be considered., (Copyright © 2019. Published by Elsevier Inc.)

Purpose: Inferior maxillary repositioning has continued to be among the most unstable orthognathic procedures. The overall purpose of the present study was to measure skeletal stability after inferior maxillary repositioning., Materials and Methods: We implemented a retrospective cohort study. The study cohort was derived from all orthognathic patients who had undergone treatment from January 2011 to December 2013 in Odense University Hospital. The inclusion criteria were orthognathic surgery with inferior maxillary repositioning in patients without maxillary segmentation or cleft lip/palate. The exclusion criteria were nonattendance at follow-up visits or requiring reoperation before the 1-year follow-up point. The primary predictor variable was the time from the 1-week follow-up examination to the 1-year follow-up examination. The primary outcome variable was maxillary skeletal movement. The other variables of interest were age, gender, preoperative occlusal relationship, maxillary movement obtained, and surgery type (mono- or bimaxillary procedure). Skeletal stability was measured at the centroid, anterior, and posterior nasal spines using the semiautomatic measurement technique. Skeletal stability was clinically defined as less than 2 mm of movement in any direction. The positive directions for the 3 axes were right, anterior, and superior. The data were analyzed using mixed model linear regression analysis and 1-sample t tests., Results: A total of 17 patients were included in the present study (mean age, 28 years; female gender, 35%; bimaxillary surgery, 59%). Inferior maxillary repositioning was stable with less than 0.3 mm mean skeletal movement in any direction. Only 1 patient had experienced a relapse of more than 1 mm in the posterior direction; no movement exceeded 2 mm. However, 3 patients were excluded from the present analysis, because they had required reoperation during the first year after surgery for osteosynthesis failure., Conclusions: Inferior maxillary repositioning was stable during the first year after surgery; however, the complication rate was high (15%). Thus, this procedure might still benefit from the use of more rigid patient-specific printed plates to increase postoperative stability., (Copyright © 2019 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.)

Purpose: In bimaxillary procedures, it is important to know how the chosen sequence affects the surgical outcome. The purpose of this study was to explore whether the theoretical advantages of using the mandible-first procedure were supported by clinical data., Materials and Methods: The authors performed a retrospective investigation on a cohort compiled from 3 published retrospective studies. The sample was composed of patients treated at the Radboud University Nijmegen Medical Centre (Nijmegen, the Netherlands) from 2010 to 2014 and the Odense University Hospital (Odense, Denmark) from 2011 to 2015. The inclusion criterion was bimaxillary surgery without maxillary segmentation. The exclusion criterion was lack of a virtual surgical plan. The primary outcome variable was surgical accuracy, defined as the mean difference between the obtained outcome and the virtual surgical plan. The primary predictor variable was the comparison between mandible-first and maxilla-first sequencing. Secondary predictors were inferior maxillary repositioning and counterclockwise (CCW) rotation. The confounding variable was the virtually planned reposition. Results were analyzed by mixed-model regression encompassing all variables, followed by a detailed analysis of positive results using 2-sample t tests., Results: Overall, 145 patients were included for analysis (98 women; mean age, 28 years). Operating on the mandible first notably influenced maxillary positioning and placed the maxilla 1.5 mm posterior and with 1.4° of CCW rotation compared with virtual surgical planning. The interaction of surgical sequence with maxillary rotation showed similar surgical accuracy between maxilla-first surgery with clockwise rotation and mandible-first surgery with CCW rotation. Inferior maxillary repositioning resulted in the maxilla being placed 1.7 mm (maxilla-first sequence) and 2.0 mm (mandible-first sequence) posterior to the planned position., Conclusion: Surgical accuracy was considerably influenced by sequencing in bimaxillary procedures. It remains important to know how the chosen sequence affects the surgical outcome so that the virtual surgical plan can be adjusted accordingly., (Copyright © 2019 American Association of Oral and Maxillofacial Surgeons. All rights reserved.)

Background: Synovial cysts of the temporomandibular joint are rare and treatment is based on consensus from cases reporting unilateral successful outcomes. A patient with a synovial cyst is presented, treated with successful surgical excision of the cyst, but without remission of joint symptoms. Furthermore, the case is supplemented by a critical, literature review., Methods: This case report deals with a patient with a synovial cyst that presented with temporomandibular joint (TMJ) pain and reduced mouth opening. Magnetic resonance imaging verified a TMJ cyst., Results: Surgical excision removed the synovial cyst, and the patient was followed-up for 4 years, with no recurrence of the cyst. Despite successful excision of the cyst, the symptoms did not subside, and the patient is still in treatment. The critical, literature review found 23 case reports describing 24 synovial cysts. In addition, 4 cases were included as their synovial cysts were erroneously described as ganglion cysts. In 4 cases, histological diagnosis could not be confirmed, and they were excluded. All cases described treatment by surgical excision without recurrence. The reported median follow-up was 10 months and postoperative TMJ symptoms were rarely examined or described., Conclusions: The temporomandibular joint symptoms may persist despite successful removal of the synovial cyst. Furthermore, the 4 identified synovial cysts, mislabelled as ganglion cysts, represents almost a quarter of the cases of the reported synovial cysts. Correct labelling and reporting of synovial cysts are still imperative to describe the diverse aspects of treatment outcomes following surgical excision.

Purpose: Selective laser melting used to manufacture patient-specific 3D-printed (PSP) plates is a delicate process, which may introduce weakened areas in the plates, with risk of fracture. This in vitro study's purpose was to test the ability of PSP plates to stabilize Le Fort I osteotomies compared with manually adapted stock plates. The study's objectives were to measure the force needed to compress the osteotomy and evaluate whether the PSP plates would break during compression., Materials and Methods: This controlled in vitro study evaluated the maxillary stability using the clinical data from 7 patients. The virtually planned maxillary reposition was 3D-printed in 2 copies, and the osteotomy gap was fixated by either PSP plates or stock plates. The models were compressed until the Le Fort I osteotomy gap was eliminated. The primary outcome was the force needed to compress the model. The primary predictor variable was a comparison between PSP and stock plates. Secondary outcome measurements were the slope of elastic modulus, yield point, and force needed for 2 mm compression. Statistical testing was performed by Wilcoxon signed-rank test with significance level at P ≤ 0.05., Results: The PSP plates performed better than stock plates in all outcome measurements. None of the plates broke during compression despite forces of more than 4000 N. The first point of failure in PSP plates was the first screw cranial to the osteotomy. In comparison, the first point of failure in stock plates was in the plates' bend at the osteotomy., Conclusion: In this in vitro setup, the Le Fort I osteotomies fixated with PSP plates were more stable than the osteotomies fixated with conventional stock plates. No adverse effects occurred during testing of PSP plates; thus, PSP plates seem to be a safe alternative to stock plates and may even be preferable., (Copyright © 2018 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.)

Purpose: Inferior maxillary repositioning is among the least stable and least predictable orthognathic procedures. The purpose of this study was to investigate whether posterior movement occurred with inferior maxillary repositioning and to analyze potential causes., Materials and Methods: This retrospective observational study evaluated all consecutive patients treated at the Department of Oral and Maxillofacial Surgery of the Odense University Hospital (Odense, Denmark) with inferior maxillary repositioning from 2011 to 2013. The obtained repositioning was compared with the virtual surgical plan to determine surgical accuracy. Measurements were performed at 3 dental reference points. Linear and rotational measurements were performed along and around the right, anterior, and superior axes. Measurements were compared by paired t tests. Internal correlations and confounding variables were analyzed by mixed model regression analysis., Results: Twenty patients were included for analysis. On average, the maxilla was positioned 1 mm posterior and 0.4 mm superior to the planned position. The virtual surgically planned reposition was statistically correlated with surgical accuracy. No other confounding variable influenced the outcome., Conclusion: The correlation between planned advancement and inferior repositioning suggests that inferior repositioning destabilizes the maxillary position and that a perioperative or early postoperative relapse occurs in response to the advancement. This immediate relapse of 1 mm should be considered in the virtual surgical plan to ensure that the maxilla is placed closer to the desired position. Thus, this procedure could still benefit from increased surgical precision and stability based on technologic advancements, such as positioning guides or printed patient-specific plates., (Copyright © 2018 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.)

Purpose: It remains unclear to what extent patient-specific printed plates can improve surgical outcomes in orthognathic procedures. This study aimed to quantify the surgical accuracy of patient-specific printed plates in vitro and to compare the results with patients' actual surgical outcomes., Patients and Methods: This in vitro study enrolled 20 postoperative orthognathic surgical patients, all treated with inferior maxillary repositioning. The preoperative midfaces were re-created in a 3-dimensionally printed model. The osteotomy and screw holes were placed at prespecified positions using a 3-dimensional guide. The dental segment was repositioned by means of the patient-specific plates. The primary outcome was the mean reposition at 3 dental reference points. The primary predictor variable was the obtained surgical reposition in vitro compared with the virtual surgical plan. Confounding variables were gender, age, occlusion, and bimaxillary surgery. The secondary outcome was surgical accuracy, and the secondary predictor was the in vitro outcomes versus the patients' surgical outcomes. Surgical accuracy was defined as the difference between the obtained reposition and the virtual surgical plan on a continuous scale. The differences were recorded in 3 dimensions according to the positive value of the 3 axes: right, anterior, and posterior. The results were analyzed using mixed-model regression and 1-sample t tests., Results: In the 20 patients (age, 18 to 64 years; 40% of patients were women), the mean planned reposition was 2.9 mm anterior and 1.8 mm inferior. In all models, the osteotomy edge was rounded off to position the plate in the predetermined position. Overall, the maxilla was positioned 0.5 mm anterior and 0.3 mm inferior to the planned position using patient-specific plates., Conclusions: The patient-specific plates positioned the maxilla in close approximation to the planned position without surgically relevant differences. The osteotomy edge must be carefully inspected for interference with the patient-specific plates to avoid displacement of the planned maxillary repositioning., (Copyright © 2018 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.)

Purpose: In orthognathic surgery, the repeatability of 3-dimensional (3D) measurements is limited by the need for manual reidentification of reference points, which can incorporate errors greater than 1 mm for every 4 repeated measurements. This report describes a semiautomatic approach to decrease the manual reidentification error. This study evaluated the repeatability of surgical outcome measurements using the semiautomatic approach. Furthermore, a step-by-step guide is provided to enable researchers and clinicians to perform the 3D analysis by themselves., Materials and Methods: Evaluating surgical outcome consists of 2 parts. First, the scans are aligned at the anterior cranial base. Second, a semiautomatic approach is used to place 3 dental reference points at exactly the same sites of the pre- and postoperative maxilla. Because the maxilla is repositioned during surgery but otherwise unaltered, the reference points should be identical if the pre- and postoperative scans are aligned at the maxilla. Therefore, the authors propose the insertion of reference points on the preoperative scan and then repositioning a copy of the preoperative reference points relative to the postoperative scan. To align the reference points on the postoperative scan, the hard palate is used as a mutual maxillary reference structure. A reproducibility test was performed in 10 participants by analyzing the difference between repeated measurements., Results: Repeated linear measurements differed by less than 0.1 mm along all 3 axes (standard deviations, <0.1 mm). The 2 largest differences between repeated measurements were 0.33 mm along the superoinferior axis and 0.29 along the anteroposterior axis. Repeated rotational measurements differed by less than 0.1° around all 3 axes (standard deviations, ≤0.1°)., Conclusion: The semiautomatic approach showed excellent linear and angular repeatability. The algorithm can be implemented in the clinical evaluation of orthognathic surgical outcome and postoperative relapse., (Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.)

Purpose: This systematic review investigates the most common indications, treatments, and outcomes of surgical navigation (SN) published from 2010 to 2015. The evolution of SN and its application in oral and maxillofacial surgery have rapidly developed over recent years, and therapeutic indications are discussed., Materials and Methods: A systematic search in relevant electronic databases, journals, and bibliographies of the included articles was carried out. Clinical studies with 5 or more patients published between 2010 and 2015 were included. Traumatology, orthognathic surgery, cancer and reconstruction surgery, skull-base surgery, and foreign body removal were the areas of interests., Results: The search generated 13 articles dealing with traumatology; 5, 6, 2, and 0 studies were found that dealt with the topics of orthognathic surgery, cancer and reconstruction surgery, skull-base surgery, and foreign body removal, respectively. The average technical system accuracy and intraoperative precision reported were less than 1 mm and 1 to 2 mm, respectively. In general, SN is reported to be a useful tool for surgical planning, execution, evaluation, and research. The largest numbers of studies and patients were identified in the field of traumatology. Treatment of complex orbital fractures was considerably improved by the use of SN compared with traditionally treated control groups., Conclusions: SN seems to be a very promising addition to the surgical toolkit. Planning details of the surgical procedure in a 3-dimensional virtual environment and execution with real-time guidance can significantly improve precision. Among factors to be considered are the financial investments necessary and the learning curve., (Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. All rights reserved.)

Purpose: In segmental maxillary procedures, it is imperative to obtain as much of the planned expansion as possible. Lack of obtained expansion, in addition to late relapse after splint removal, can result in relapse of the posterior crossbite. This study investigated the influence of 2 surgical splint designs on achieving the planned transverse expansion in bimaxillary surgery with segmental maxillary procedures., Materials and Methods: Forty-two participants were included in a retrospective observational study. All participants had completed virtually planned bimaxillary surgery with 3-piece maxillary segmentation. The primary outcome variable was the transverse expansion obtained, measured as the expansion between the maxillary first molars on preoperative and postoperative cone-beam computed tomograms. The postoperative scan was performed 1 week after surgery with the splint still in place. To test measurement reliability, all measurements were performed twice by the same observer. The primary predictor variable was the planned expansion according to the virtual surgical plan. The primary covariate with influence on the obtained expansion was the surgical splint design. Other covariates of interest included patient age, patient gender, and surgeon. Descriptive and bivariate statistics were performed using Student t tests and linear regression analysis., Results: Measurements showed high reliability, with an intraclass correlation coefficient of 0.99 and Bland-Altman plots without systematic errors. The obtained expansion was statistically different from the planned expansion (mean, -0.77 mm; standard deviation, 0.83). Surgical splint design meaningfully influenced transverse expansion: 77% of the planned expansion was obtained with high palatal coverage, whereas 50% was obtained with low palatal coverage. No other covariates influenced the expansion obtained., Conclusion: Not all the planned expansion is obtained during segmental bimaxillary surgery. Use of rigid surgical splints with high palatal coverage considerably improves the amount of expansion obtained and is recommended for segmental maxillary procedures., (Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.)

Objective: Craniofacial bone trauma is a leading reason for surgery at most hospitals. Large pieces of destroyed or resected bone are often replaced with non-resorbable and stock implants, and these are associated with a variety of problems. This paper explores the use of a novel fatty acid/calcium phosphate suspension melt for simple additive manufacturing of ceramic tricalcium phosphate implants., Methods: A wide variety of non-aqueous liquids were tested to determine the formulation of a storable 3D printable tricalcium phosphate suspension ink, and only fatty acid-based inks were found to work. A heated stearic acid-tricalcium phosphate suspension melt was then 3D printed, carbonized and sintered, yielding implants with controllable macroporosities. Their microstructure, compressive strength and chemical purity were analyzed with electron microscopy, mechanical testing and Raman spectroscopy, respectively. Mesenchymal stem cell culture was used to assess their osteoconductivity as defined by collagen deposition, alkaline phosphatase secretion and de-novo mineralization., Results: After a rapid sintering process, the implants retained their pre-sintering shape with open pores. They possessed clinically relevant mechanical strength and were chemically pure. They supported adhesion of mesenchymal stem cells, and these were able to deposit collagen onto the implants, secrete alkaline phosphatase and further mineralize the ceramic., Significance: The tricalcium phosphate/fatty acid ink described here and its 3D printing may be sufficiently simple and effective to enable rapid, on-demand and in-hospital fabrication of individualized ceramic implants that allow clinicians to use them for treatment of bone trauma., (Copyright © 2016 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.)

Reduced volume of the internal skeletal dimensions of the face is 1 of the main causes of obstructive sleep apnea, and attention to patients' airways is necessary when planning orthognathic treatment. This study aims to describe changes in upper airway volume following virtually planned orthognathic surgery.A retrospective pilot study was designed with 30 randomly selected patients (10 men and 20 women, aged 23.1 ± 6.8 years, molar-relations: 15 neutral, 8 distal, and 7 mesial). Cone-beam computed tomography scans were performed before surgery and 1 week following surgery. The authors did total upper airway volume measurements and obtained 1-mm slices at vertical levels in the velo-, oro-, and hypopharynx and at the smallest visible cross-section.Measurements before and after surgery were compared using Student t test.After orthognathic surgery, the minimum cross-sectional area at the vertical level increased from 83 mm ± 33 before surgery to 102 mm ± 36 after surgery (P = 0.019). In patients with neutral and distal occlusions, the minimum cross-sectional slice volume increased in 87% but in only 57% with mesial occlusion.The present findings suggest that orthognathic surgery increases upper airway volume parameters, but a few patients have continued impairment of the airways following orthognathic surgery. Further studies are needed to confirm an individual surgical planning approach that potentially could bring the minimum cross sectional area out of the risk zone.

Purpose: The purpose of this systematic review was to describe the efficacy of smoking cessation counseling and the resulting quit rate in patients with head and neck cancer., Materials and Methods: A systematic literature search was conducted in the PubMed, Embase, and Cochrane databases. Predictor variables were smoking cessation counseling and smoking cessation interventions. The outcome was smoking cessation. Data collection and quality assessment were performed independently by 2 of the authors. Selected publications were assessed for potential risk of bias, and the level of evidence was evaluated using National Health and Medical Research Council guidelines. Review Manager 5.3 was used to conduct the meta-analysis., Results: Eight studies involving 1,239 patients were included (3 randomized controlled trials, 3 cohorts, and 2 case series). Smoking cessation was achieved considerably more often in patients who received smoking cessation counseling compared with those who received usual care., Conclusions: This review shows that counseling supplemented with nicotine replacement therapy increases the possibility for smoking cessation in patients with head and neck cancer., (Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.)

Introduction: Cardiovascular morbidity is a major burden in patients with rheumatoid arthritis (RA). In this study, we compare the effect of a targeted, intensified, multifactorial intervention with that of conventional treatment of modifiable risk factors for cardiovascular disease (CVD) in patients with early RA fulfilling the 2010 American College of Rheumatology European League Against Rheumatism (ACR/EULAR) criteria., Methods and Analysis: The study is a prospective, randomised, open label trial with blinded end point assessment and balanced randomisation (1:1) conducted in 10 outpatient clinics in Denmark. The primary end point after 5 years of follow-up is a composite of death from cardiovascular causes, non-fatal myocardial infarction, non-fatal stroke and cardiac revascularisation. Secondary outcomes are: the proportion of patients achieving low-density lipoprotein cholesterol <2.5 mmol/L, glycated haemoglobin <48 mmol/mol, blood pressure <140/90 mm  Hg for patients without diabetes and <130/80 mm Hg for patients with diabetes and normoalbuminuria (urinary albumin creatinine ratio <30 mg/g) after 1 year of follow-up and the proportion of patients in each treatment group achieving low RA disease activity after 1 year, defined as a disease activity score C-reactive protein (DAS28-CRP) <3.2 and a DAS28-CRP score <2.6 after 12, 24 and 60 months. Furthermore, all hospitalisations for acute and elective reasons will be adjudicated by the event committee after 12, 24 and 60 months. Three hundred treatment-naive patients with early RA will be randomly assigned (1:1) to receive either conventional treatment administered and monitored by their general practitioner according to national guidelines (control group) or a stepwise implementation administered and monitored in a quarterly rheumatological nurse-administered set-up of behaviour modification and pharmacological therapy targeting (1) hyperlipidaemia, (2) hypertension, (3) hyperglycaemia and (4) microalbuminuria (intervention group)., Ethics and Dissemination: This protocol is approved by the local ethics committee (DK-S-2014007) and The Danish Health and Medicines Authority. Dissemination will occur through presentations at National and International conferences and publications in international peer-reviewed journals., Trial Registration Number: NCT02246257., (Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/)

Mandibular condylar hyperplasia (MCH) is a rare, idiopathic disorder, which can cause both functional and aesthetic problems. MCH has often been described in the literature, but a comprehensive analysis of the current literature on MCH has not been undertaken. This study presents a systematic review analyzing the efficacy of high condylectomy in patients with MCH, with an emphasis on its role in the management of unilateral condylar hyperplasia. A systematic search of the current literature on high condylectomy was performed to find studies with sample sizes of more than five patients using a set of inclusion/exclusion criteria. The search terms revealed 664 studies, of which only 11 articles with a total of 289 patients were eligible for inclusion. Due to differences in the presentation of data, a meta-analysis was not conducted. High condylectomy appears to be a relevant surgical method to correct unilateral condylar hyperplasia. The current literature indicates large variations in terms of aetiology, use of diagnostic tools, and preferred time of intervention. Thus, further systematic studies are needed to determine which procedures offer the best aesthetic and functional results., (Copyright © 2015 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.)

Purpose: The upper airway volume is central to the development and treatment of snoring and obstructive sleep apnea, and mandibular advancement devices (MADs) have increasingly been used as an effective alternative to continuous positive airway pressure for these 2 conditions. We investigated the changes in breathing patterns and upper airway volume parameters measured on cone-beam computed tomography (CBCT) scans of patients with and without the use of custom-made MADs., Materials and Methods: We performed a prospective study at the Department of Oral and Maxillofacial Surgery, Odense University Hospital, on consecutively treated patients. CBCT scans were performed with and without the MAD to measure the changes in the upper airway volume. The patients underwent diagnostic cardiorespiratory monitoring before and after 3 months of MAD therapy. Measurements with and without MAD were compared using Student's t test and the Wilcoxon signed rank test, and mixed-model analyses were performed adjusting for sleep apnea severity, type 2 diabetes, body mass index, gender, and age., Results: A total of 44 patients (31 men and 13 women, age 50 ± 13 years, body mass index 31 ± 5.6 kg/m(2)) completed the trial. MAD therapy was associated with an increase in the total upper airway volume from 22.9 ± 8.7 cm(3) before treatment to 26.7 ± 10.7 cm(3) after treatment (P < .001). MAD therapy reduced the apnea-hypopnea index (AHI) from 15.8 ± 17.4 events/hour before treatment to 6.2 ± 9.8 events/hour after treatment (P < .001)., Conclusion: The results of the present study indicate that MAD therapy appears to produce significant changes in the upper airway volume that correlate with a decrease in the AHI., (Copyright © 2015 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.)