Search

GSI Scientific Report 2014 - GSI Report 2015-1

GSI Scientific Report 2014 - GSI Report 2015-1

GSI Scientific Report 2013 - GSI Report 2014-1

To include the influence of synchrotron oscillations, beam feedback and IBS a particle by particle and turn by turn treatment in the time-domain has been tried out. – Complete pickup, amplification and kicker characteristics, defined in the frequency domain, are introduced via inverse Laplace transformation, and so is the Dirac function representing the single ion. – The computation time is kept within reasonable limits thanks to the rule that cooling times scale proportionally with the particle number [1]. Typically 10000 simulation particles are cooled in 1200 turns. A recent proposal [2], based on signal binning and FFTs, offers the potential for at least one order of magnitude more ions and turns.

An overview of the recent achievements and ongoing developments for the stochastic cooling system of the Collector Ring is given. In focus are the hardware developments as well as the progress in predicting the system performance. The system operates in the frequency band 1-2 GHz, it has to provide fast 3D cooling of antiproton, rare isotope and stable heavy ion beams. The main challenges are (i) the cooling of antiprotons by means of cryogenic movable pick-up electrodes and (ii) the fast two-stage cooling (pre-cooling by the Palmer method, followed by the notch filter method) of the hot rare isotope beams (RIBs). Recently, a novel code for simulating the cooling process in the time domain has been developed at CERN. First results for the momentum cooling for heavy ions in the CR will be shown in comparison with results obtained in the frequency domain with the Fokker-Planck approach.

We report on the design of a Faltin type pickup for the stochastic cooling of rare isotope beams (RIBs), using a bandwidth of 1–2 GHz, for the Collector Ring (CR) at GSI. Through HFSS simulations using an eigenmode solver, the impedance and signal output phases are calculated and presented.

The CLIC Test Facility 3 (CTF3), built at CERN by an international collaboration, aims at demonstrating the feasibility of the CLIC scheme by 2010. The CTF3 drive beam generation scheme relies on the use of a fast phase switch of a sub-harmonic bunching system in order to phase-code the bunches. The amount of charge in unwanted satellite bunches is an important quantity, which must be minimized. Beam dynamic simulations have been used to study the problem, showing the limitation of the present CTF3 design and the gain of potential upgrades. In this paper the results are discussed and compared with beam measurements taken during the first operation of the system.

The CR storage ring is part of the FAIR project at GSI.It serves as a first stage of stochastic cooling for secondary rare isotopes at v/c=0.83 as well as for antiprotons at v/c=0.97. To avoid the installation of dedicated structures for each kind of beam, electrodes have been developed which are usable for both beams. They are based on slotline structures mounted perpendicular to the beam. They are shorted at the ends, and their signal is extracted by two striplines on the rear side, placed a quarter wavelength away from the open ends. The width of the structures can be adjusted to the initial betatron oscillation amplitudes. Their length is 25 mm, and the signal from many of these structures mounted in a row can be combined. The signal combination can be matched to the different beam velocities. The paper shows results from field calculations, prototype tests, and estimates of the signal combination efficiency. The beam impedance of the novel structures is compared with the superelectrodes applied in the former CERN AC and with the slow-wave structures currently installed in the FNAL Debuncher.

The Two-Beam Accelerator concept is one of the most promising methods for producing RF power for future linear colliders. In particular it allows upgrades to multi-TeV energies. One of its challenges is the production of the high current drive beam, which as it passes through decelerating structures, produces rf power for acceleration of the main beam. These challenges must be studied at a smaller scale test facility.

The CLIC study of a high-energy (0.5 - 5 TeV), high-luminosity (1034 - 1035 cm-2 sec-1) e+e- linear collider is presented. Beam acceleration using high frequency (30 GHz) normal-conducting structures operating at high accelerating fields (150 MV/m) significantly reduces the length and, in consequence, the cost of the linac. Using parameters derived from general scaling laws for linear colliders, the beam stability is shown to be similar to lower frequency designs in spite of the strong wake-field dependency on frequency. A new cost-effective and efficient drive beam generation scheme for RF power production by the so-called "Two-Beam Acceleration" method is described. It uses a thermionic gun and a fully-loaded normal-conducting linac operating at low frequency (937 MHz) to generate and accelerate the drive beam bunches, and RF multiplication by funnelling in compressor rings to produce the desired bunch structure. Recent 30 GHz hardware developments and CLIC Test Facility (CTF) results are described.

The CLIC study of a high energy (0.5 - 5 TeV), high luminosity (1034 - 1035 cm-2 sec-1) e± linear collider is presented. Beam acceleration using high frequency (30 GHz) normal-conducting structures operating at high accelerating fields (150 MV/m) significantly reduces the length and, in consequence, the cost of the linac. Based on new beam and linac parameters derived from a recently developed set of general scaling laws for linear colliders, the beam stability is shown to be similar to lower frequency designs in spite of the strong wake-field dependency on frequency. A new cost-effective and efficient drive beam generation scheme for RF power production by the so-called "Two Beam Acceleration (TBA)" method is described. It uses a thermionic gun and a fully-loaded normal-conducting linac operating at low frequency (937 MHz) to generate and accelerate the drive beam bunches, and RF multiplication by funnelling in compressor rings to produce the desired bunch structure. Recent 30 GHz hardware developments and results from the CLIC Test Facility (CTF), assessing the feasibility of the scheme, are described.

PETS performance degradations caused by finite Q-values and small tune errors are estimated. A simple explanation of the recently discovered group velocity enhancement of the loss factor is given.

The progress of the Compact LInear Collider (CLIC) study of a multi-TeV (0.5 - 5 TeV) high-luminosity (5'1033 to 1.5'1035 cm-2 sec-1) e± linear collider based on Two-Beam Acceleration (TBA) is presented. The length and, in consequence, the cost of the overall complex is reduced by the use of high accelerating fields (150 MV/m), which are generated by specially damped 30 GHz normal-conducting accelerating structures. The large amount of RF power (400 MW/m) required to generate these high fields is provided by a novel RF power generating scheme which is potentially both cost and power efficient. After summarising the progress made in the developments of 30 GHz components and the performance obtained in the present phase of the CLIC Test Facility (CTF2), the design of a new test facility (CTF3), which will demonstrate the feasibility of the RF power generating scheme, is described

The loss factor, a quantity linked to the energy lost by a point-like charge when traversing an accelerating (or decelerating) structure, can be computed using programs which solve Maxwell's equations in time domain and provide the correct result within the limitations inherent to the numerical simulation process. An alternative method, commonly used, consists in the derivation of the loss factor from the parameter R/Q, which is computed using codes operating in frequency-domain. Recent calculations of the loss factors for disk-loaded structures performed with the two methods have produced diverging results. The discrepancy of the results is a function of the group velocity and can be eliminated by introducing a correction term in the formula linking the loss factor to the R/Q obtained from frequency-domain calculations.

In the so-called "Two-Beam Acceleration Scheme" the energy of a drive beam is converted to rf power by means of a "Transfer Structure", which plays the role of power source. In the Transfer Structure the bunched drive beam is decelerated by the electromagnetic field which it induces and builds up by the coherent interaction of successive bunches with the chosen longitudinal mode. The CLIC Transfer Structure is original in that it operates at 30 GHz and uses teeth-like corrugations to slow down the hybrid TM mode to make it synchronous with the drive beam. The beam energy is transformed into rf power, which travels along the structure and is collected by the output couplers. The 30 GHz rf power is then transported by means of two waveguides to two main linac disk-loaded accelerating structures. This report describes the CLIC Transfer Structure design, 3-D computer simulations, model construction and measure-ments as well as the prototype construction and testing with the low energy beam in the CLIC Test Facility. The result of this development is a compact, fully passive, relatively simple and low cost device, which offers a readily scalable solution to the problem of rf power extraction from high frequency bunched beams.

The Compact Linear Collider (CLIC) Test Facility (CTF II) at CERN has recently demonstrated Two-Beam power production and acceleration at 30 GHz. With 41 MW of 30 GHz power produced in 14 ns pulses at a repetition rate of 5 Hz, the main beam has been accelerated by 28 MeV with fields of 59 MV/m. The 30 GHz RF power is extracted in low impedance decelerating structures from a low-energy, high-current "drive beam" which runs parallel to the main beam. The average current in the drive-beam train is 25 A, while the peak current exceeds 2 kA. Crosschecks between measured drive-beam charge, 30 GHz power and main-beam energy gain are in good agreement. In this paper, some relevant experimental and technical issues on drive-beam generation, two-beam power production and acceleration are presented.

The second phase of the Compact LInear Collider (CLIC) Test Facility (CTF II) at CERN has demon-strated the feasibility of two-beam acceleration at 30 GHz using a high-charge drive beam, running paral lel to the main beam, as the RF power source. To date accelerating gradients of 59 MV/m at 30 GHz have been achieved. In CTF II, the two beams are generated by 3 GHz RF photo-injectors and are acceler ated in 3 GHz linacs, before injection into the 30 GHz modules. The drive beam linac has to accelerate a 16 ns long train of 48 bunches, each with a nominal charge of 13.4 nC. To cope with the very su bstantial beam-loading special accelerating structures are used (running slightly off the bunch repetition frequency). A magnetic chicane compresses the bunches to less than 5 ps fwhm, this is needed for efficient 30 GHz power generation. The 30 GHz modules are fully-engineered representative sections of CLIC, they include a 30 GHz decelerator for the drive beam, a 30 GHz accelerator for the main beam, high resolution BPM's and a wire-based active align-ment system. The performance achieved so far, as well as the operational experience with the first accelerator of this type, are reported.

The CLIC study of a high energy (0.5 - 5 TeV), high luminosity (10^34 - 10^35 cm^-2 sec^-1) e± linear collider is presented. Beam acceleration using high frequency (30 GHz) normal-conducting structure s operating at high accelerating fields (100 to 200 MV/m) significantly reduces the length and, in consequence the cost of the linac. Based on new beam and linac parameters derived from a recently dev eloped set of general scaling laws for linear colliders, the beam stability is shown to be similar to lower frequency designs in spite of the strong wake-field dependency on frequency. A new cost effe ctive and very efficient drive beam generation scheme for RF power production by the so-called "Two Beam Acceleration (TBA)" method is described. It uses a conventional thermionic gun and a fully-load ed normal-conducting linac operating at low frequency (937 MHz) to generate and accelerate the drive beam bunches and RF multiplication by funneling in compressor rings to produce the desired bunch st ructure. Recent 30 GHz hardware developments and results from the CLIC Test Facility (CTF) assessing the feasibility of the scheme are described.

The present note describes an RF power generation scheme for multibunch operation at 1 TeV CM and luminosity 10^34 cm^-2s^-1. - The scheme is upgraded to use acceleration with 200 MHz SC cavities (instead of 352 or 250 MHz ones, but still with 6MV/m) in order to reduce the active SC linac length, for the required stored electromagnetic energy (180 KJ/linac), and hence also reduce the capital cost of drive beam generation. Further value (7.8 10^9), due to the lowered frequency, increases the overall efficiency.

This note describes an RF power generation scheme for multibunch operation at 1 TeV CM and luminosity of 1034 cm–2 s–1. The scheme is upgraded to use acceleration with 250 MHz SC cavities (instead of 352 MHz ones) in order to have available the increased stored RF energy necessary to accelerate to 3 GeV the newly required charge of 30 µC/drive beam.

In order to study the principle of the Compact Linear Collider (CLIC) based on the Two Beam Acceleration (TBA) scheme at high frequency, a CLIC Test Facility (CTF) has been set-up at CERN. After four years of successful running, the experimental programme is now fully completed and all its objectives reached, particularly the generation of a high intensity drive beam with short bunches by a photo-injector, the production of 30 GHz RF power and the acceleration of a probe beam by 30 GHz structures. A summary of the CTF results and their impact on linear collider design is given. This covers 30 GHz high power testing, study of intense, short single bunches; as well as RF-Gun, photocathode and beam diagnostic developments. A second phase of the test facility (CTF2) is presently being installed to demonstrate the feasibility of the TBA scheme by constructing a fully engineered, 10 m long, test section very similar to the CLIC drive and main linacs, producing up to 480 MW of peak RF power at 30 GHz and accelerating the beam up to 320 MeV. The present status of CTF2 is reported.