Search

1 The pharmacological properties of atenolol suggest its possible usefulness in pregnancy-induced hypertension. The pharmacokinetics of atenolol in the pregnant woman, concentrations in cord blood, and its effects on maternal blood pressure and the foetus, are evaluated. 2 We studied 13 pregnant women with hypertension, most of them uncontrolled on methyldopa. Whole blood concentrations and urinary excretion of the drug were measured over 24 h following a 100 mg dose. Effects on maternal blood pressure, pulse rate and foetal heart rate and cardiotocograph were compared for the 4 days before treatment and the first 4 days of treatment. The birth weights and Apgar scores of the babies were recorded. 2 The pharmacokinetics of atenolol (plasma half- life of about 8 h) in pregnant women do not differ from the findings in the non-pregnant. The levels of atenolol in the cord blood were confirmed as approximately equal to those in the maternal blood. 4 In the ten women in whom blood pressure was assessed a small significant fall in blood pressure was observed. 5 A 5% mean fall in foetal heart rate resulted but in one case was a rate below 120 beats/min recorded. There was no evidence of depression of the stress response of the foetal heart. Apgar scores 5 min post partum were satisfactory. 6 Atenolol appears to be safe for use in hypertensive pregnancies. Its effectiveness as an antihypertensive agent in pregnancy requires further controlled evaluation. [ABSTRACT FROM AUTHOR]

Singlet fission, the process of transforming a singlet excited state into two lower energy triplet excited states, is a promising strategy for improving the efficiency of dye-sensitized solar cells. The difficulty in utilizing singlet fission molecules in this architecture is understanding and controlling the orientation of dyes on mesoporous metal oxide surfaces to maximize triplet production and minimize detrimental deactivation pathways, such as electron injection from the singlet or excimer formation. Here, we varied the concentration of loading solutions of two anthradithiophene dyes derivatized with either one or two carboxylic acid groups for binding to a metal oxide surface and studied their photophysics using ultrafast transient absorption spectroscopy. For the single carboxylic acid case, an increase in dye surface coverage led to an increase in apparent triplet excited-state growth via singlet fission, while the same increase in coverage with two carboxylic acids did not. This study represents a step toward controlling the interactions between molecules at mesoporous interfaces., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Organic semiconductor small molecules and polymers often incorporate heteroatoms into their chemical structures to affect the electronic properties of the material. A particular design philosophy has been to use these heteroatoms to influence torsional potentials, since the overlap of adjacent π-orbitals is most efficient in planar systems and is critical for charge delocalization in these systems. Since these design rules became popular, the messages from the earlier works have become lost in a sea of reports of "conformational locks", where the non-covalent interactions have relatively small contributions to planarizing torsional potentials. Greater influences can be found in the stabilization by extended conjugation, consideration of steric repulsion, and the interactions involving solubilizing chains and neighboring molecules or polymer chains in condensed phases., (© 2024 The Authors. ChemPlusChem published by Wiley-VCH GmbH.)

Aluminum fluoride (AlF) complexes have been used over the past decade to incorporate [ 18 F]fluoride into large biomolecules in a highly selective fashion by using relatively facile conditions. However, despite their widespread usage, there are a large number of variations in the reaction conditions, without a definitive discussion provided on the mechanism to understand how these changes would alter the end result. Herein, we report a detailed mechanistic investigation of the reaction, using a mixture of theoretical studies, fluorine-19 and fluorine-18 chemistry, and the consequences it has on the efficient clinical translation of AlF-containing imaging agents.

Tetraceno[2,3- b ]thiophene is regarded as a strong candidate for singlet fission-based solar cell applications due to its mixed characteristics of tetracene and pentacene that balance exothermicity and triplet energy. An electronically weakly coupled tetraceno[2,3- b ]thiophene dimer (Et 2 Si(TIPSTT) 2 ) with a single silicon atom bridge has been synthesized, providing a new platform to investigate the singlet fission mechanism involving the two acene chromophores. We study the excited state dynamics of Et 2 Si(TIPSTT) 2 by monitoring the evolution of multiexciton coupled triplet states, 1 TT to 5 TT to 3 TT to T 1 + S 0 , upon photoexcitation with transient absorption, temperature-dependent transient absorption, and transient/pulsed electron paramagnetic resonance spectroscopies. We find that the photoexcited singlet lifetime is 107 ps, with 90% evolving to form the TT state, and the complicated evolution between the multiexciton states is unraveled, which can be an important reference for future efforts toward tetraceno[2,3- b ]thiophene-based singlet fission solar cells.

Organic dosimeters offer unique advantages over traditional technologies, and they can be used to expand the capabilities of current radiation detection systems. In-depth knowledge of the mechanisms underlying the interaction between radiation and organic materials is essential for their widespread adoption. Here, we identified and quantitatively characterized the electronic traps generated during the operation of radiation dosimeters based on organic field-effect transistors. Spectral analysis of the trap density of states, along with optical and structural studies, revealed the origin of trap states as local structural disorder within the crystalline films. Our results provide new insights into the radiation-induced defects in organic dosimeters, and pave the way for the development of more efficient and reliable radiation detection devices.

This study investigates the solid-state charge transport properties of the oxidized forms of dioxythiophene-based alternating copolymers consisting of an oligoether-functionalized 3,4-propylenedioxythiophene (ProDOT) copolymerized with different aryl groups, dimethyl ProDOT (DMP), 3,4-ethylenedioxythiophene (EDOT), and 3,4-phenylenedioxythiophene (PheDOT), respectively, to yield copolymers P(OE3)-D, P(OE3)-E, and P(OE3)-Ph. At a dopant concentration of 5 mM FeTos 3 , the electrical conductivities of these copolymers vary significantly (ranging between 9 and 195 S cm -1 ) with the EDOT copolymer, P(OE3)-E, achieving the highest electrical conductivity. UV-vis-NIR and X-ray spectroscopies show differences in both susceptibility to oxidative doping and extent of oxidation for the P(OE3) series, with P(OE3)-E being the most doped. Wide-angle X-ray scattering measurements indicate that P(OE3)-E generally demonstrates the lowest paracrystallinity values in the series, as well as relatively small π-π stacking distances. The significant (i.e., order of magnitude) increase in electrical conductivity of doped P(OE3)-E films versus doped P(OE3)-D or P(OE3)-Ph films can therefore be attributed to P(OE3)-E exhibiting both the highest carrier ratios in the P(OE3) series, along with good π-π overlap and local ordering (low paracrystallinity values). Furthermore, these trends in the extent of doping and paracrystallinity are consistent with the reduced Fermi energy level and transport function prefactor parameters calculated using the semilocalized transport (SLoT) model. Observed differences in carrier ratios at the transport edge ( c t ) and reduced Fermi energies [η( c )] suggest a broader electronic band (better overlap and more delocalization) for the EDOT-incorporating P(OE3)-E polymer relative to P(OE3)-D and P(OE3)-Ph. Ultimately, we rationalize improvements in electrical conductivity due to microstructural and doping enhancements caused by EDOT incorporation, a structure-property relationship worth considering in the future design of highly electrically conductive systems.

Thiophenes functionalised in the 3-position are ubiquitous building blocks for the design and synthesis of organic semiconductors. Their non-centrosymmetric nature has long been used as a powerful synthetic design tool exemplified by the vastly different properties of regiorandom and regioregular poly(3-hexylthiophene) owing to the repulsive head-to-head interactions between neighbouring side chains in the regiorandom polymer. The renewed interest in highly electron-rich 3-alkoxythiophene based polymers for bioelectronic applications opens up new considerations around the regiochemistry of these systems as both the head-to-tail and head-to-head couplings adopt near-planar conformations due to attractive intramolecular S-O interactions. To understand how this increased flexibility in the molecular design can be used advantageously, we explore in detail the geometrical and electronic effects that influence the optical, electrochemical, structural, and electrical properties of a series of six polythiophene derivatives with varying regiochemistry and comonomer composition. We show how the interplay between conformational disorder, backbone coplanarity and polaron distribution affects the mixed ionic-electronic conduction. Ultimately, we use these findings to identify a new conformationally restricted polythiophene derivative for p-type accumulation-mode organic electrochemical transistor applications with performance on par with state-of-the-art mixed conductors evidenced by a μC * product of 267 F V -1  cm -1  s -1 ., Competing Interests: The authors declare no conflict of interest., (© 2023 The Authors. Angewandte Chemie published by Wiley-VCH GmbH.)

Organic conjugated polymers have been pivotal in the development of organic electronics in applications such as in organic field effect transistors and photovoltaics. In these applications, the electronic structures of the polymers change by the gain or loss of charge. In this work, the visualization of charge delocalization in oligomeric and polymeric systems by range-separated density functional theory calculations reveals an efficient method of determining the polymer limit and polaron delocalization lengths of conjugated systems. Methods of displaying these data and the important computational details of the calculations are explored. These calculations provide researchers information about intrachain charge transport, donor-acceptor characteristics, and a method of validating that the computational model structures are indeed representative of the polymer and not just small molecules. Contributions from differing co-monomers to the polymer properties can be assessed through plotting the charge distributions along the polymer backbone. Visualization of polaron (de)localization can guide future polymer design, e.g., by placement of solubilizing chains to aid interchain interactions at polymer sections bearing greater polaron localization, or by minimizing charge accumulation at potentially reactive monomer units.

Singlet fission proceeds through a manifold of triplet-pair states that are exceedingly difficult to distinguish spectroscopically. Here, we introduce a new implementation of photoinduced-absorption-detected magnetic resonance (PADMR) and use it to understand the excited-state absorption spectrum of a tri-2-pentylsilylethynyl pentadithiophene (TSPS-PDT) film. These experiments allow us to directly correlate magnetic transitions driven by RF with electronic transitions in the visible and near-infrared spectrum with high sensitivity. We find that the new near-infrared excited-state transitions that arise in thin films of TSPS-PDT are correlated with the magnetic transitions of T 1 , not 5 TT. Thus, we assign these features to the excited-state absorption of 1 TT, which is depleted when T 1 states are driven to a spin configuration that forbids subsequent fusion. These results clarify the disputed origin of triplet-associated near-infrared absorption features in singlet-fission materials and demonstrate an incisive general purpose tool for studying the evolution of high-spin excited states.

Molecular spin systems based on photoexcited triplet pairs formed via singlet fission (SF) are attractive as carriers of quantum information because of their potentially pure and controllable spin polarization, but developing systems that offer optical routes to readout as well as initialization is challenging. Herein, we characterize the electron spin magnetic resonance change in the photoluminescence intensity for a tailored organic molecular crystal while sweeping a microwave drive up to 10 GHz in a broadband loop structure. We observe resonant transitions for both triplet and quintet spin sublevel populations showing their optical sensitivity and revealing the zero-field parameters for each. We map the evolution of these spectra in both microwave frequency and magnetic field, producing a pattern of optically detected magnetic resonance (ODMR) peaks. Fits to these data using a suitable model suggest significant spin polarization in this system with orientation selectivity. Unusual excitation intensity dependence is also observed, which inverts the sign of the ODMR signal for the triplet features, but not for the quintet. These observations demonstrate optical detection of the spin sublevel population dictated by SF and intermolecular geometry, and highlight anisotropic and multi-scale dynamics of triplet pairs.

The photo-driven process of singlet fission generates coupled triplet pairs (TT) with fundamentally intriguing and potentially useful properties. The quintet 5 TT 0 sublevel is particularly interesting for quantum information because it is highly entangled, is addressable with microwave pulses, and could be detected using optical techniques. Previous theoretical work on a model Hamiltonian and nonadiabatic transition theory, called the JDE model, has determined that this sublevel can be selectively populated if certain conditions are met. Among the most challenging, the molecules within the dimer undergoing singlet fission must have their principal magnetic axes parallel to one another and to an applied Zeeman field. Here, we present time-resolved electron paramagnetic resonance (TR-EPR) spectroscopy of a single crystal sample of a tetracenethiophene compound featuring arrays of dimers aligned in this manner, which were mounted so that the orientation of the field relative to the molecular axes could be controlled. The observed spin sublevel populations in the paired TT and unpaired (T+T) triplets are consistent with predictions from the JDE model, including preferential 5 TT 0 formation at z ‖ B 0 , with one caveat-two 5 TT spin sublevels have little to no population. This may be due to crossings between the 5 TT and 3 TT manifolds in the field range investigated by TR-EPR, consistent with the intertriplet exchange energy determined by monitoring photoluminescence at varying magnetic fields.

Organic mixed ionic and electronic conductors are of significant interest for bioelectronic applications. Here, three different isoindigoid building blocks are used to obtain polymeric mixed conductors with vastly different structural and electronic properties which can be further fine-tuned through the choice of comonomer unit. This work shows how careful design of the isoindigoid scaffold can afford highly planar polymer structures with high degrees of electronic delocalization, while subtle structural modifications can control the dominant charge carrier (hole or electron) when probed in organic electrochemical transistors. A combination of experimental and computational techniques is employed to probe electrochemical, structural, and mixed ionic and electronic properties of the polymer series which in turn allows the derivation of important structure-property relations for this promising class of materials in the context of organic bioelectronics. Ultimately, these findings are used to outline robust molecular-design strategies for isoindigo-based mixed conductors that can support efficient p-type, n-type, and ambipolar transistor operation in an aqueous environment., (© 2022 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Novel p-type semiconducting polymers that can facilitate ion penetration, and operate in accumulation mode are much desired in bioelectronics. Glycol side chains have proven to be an efficient method to increase bulk electrochemical doping and optimize aqueous swelling. One early polymer which exemplifies these design approaches was p(g2T-TT), employing a bithiophene- co -thienothiophene backbone with glycol side chains in the 3,3' positions of the bithiophene repeat unit. In this paper, the analogous regioisomeric polymer, namely pgBTTT, was synthesized by relocating the glycol side chains position on the bithiophene unit of p(g2T-TT) from the 3,3' to the 4,4' positions and compared with the original p(g2T-TT). By changing the regio-positioning of the side chains, the planarizing effects of the S-O interactions were redistributed along the backbone, and the influence on the polymer's microstructure organization was investigated using grazing-incidence wide-angle X-ray scattering (GIWAXS) measurements. The newly designed pgBTTT exhibited lower backbone disorder, closer π-stacking, and higher scattering intensity in both the in-plane and out-of-plane GIWAXS measurements. The effect of the improved planarity of pgBTTT manifested as higher hole mobility (μ) of 3.44 ± 0.13 cm 2 V -1 s -1 . Scanning tunneling microscopy (STM) was in agreement with the GIWAXS measurements and demonstrated, for the first time, that glycol side chains can also facilitate intermolecular interdigitation analogous to that of pBTTT. Electrochemical quartz crystal microbalance with dissipation of energy (eQCM-D) measurements revealed that pgBTTT maintains a more rigid structure than p(g2T-TT) during doping, minimizing molecular packing disruption and maintaining higher hole mobility in operation mode.

Photoinduced electron transfer into mesoporous oxide substrates is well-known to occur efficiently for both singlet and triplet excited states in conventional metal-to-ligand charge transfer (MLCT) dyes. However, in all-organic dyes that have the potential for producing two triplet states from one absorbed photon, called singlet fission dyes, the dynamics of electron injection from singlet vs. triplet excited states has not been elucidated. Using applied bias transient absorption spectroscopy with an anthradithiophene-based chromophore ( ADT-COOH ) adsorbed to mesoporous indium tin oxide ( nanoITO ), we modulate the driving force and observe changes in electron injection dynamics. ADT-COOH is known to undergo fast triplet pair formation in solid-state films. We find that the electronic coupling at the interface is roughly one order of magnitude weaker for triplet vs. singlet electron injection, which is potentially related to the highly localized nature of triplets without significant charge-transfer character. Through the use of applied bias on nanoITO : ADT-COOH films, we map the electron injection rate constant dependence on driving force, finding negligible injection from triplets at zero bias due to competing recombination channels. However, at driving forces greater than -0.6 eV, electron injection from the triplet accelerates and clearly produces a trend with increased applied bias that matches predictions from Marcus theory with a metallic acceptor., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Solution processed organic field effect transistors can become ubiquitous in flexible optoelectronics. While progress in material and device design has been astonishing, low environmental and operational stabilities remain longstanding problems obstructing their immediate deployment in real world applications. Here, we introduce a strategy to identify the most probable and severe degradation pathways in organic transistors and then implement a method to eliminate the main sources of instabilities. Real time monitoring of the energetic distribution and transformation of electronic trap states during device operation, in conjunction with simulations, revealed the nature of traps responsible for performance degradation. With this information, we designed the most efficient encapsulation strategy for each device type, which resulted in fabrication of high performance, environmentally and operationally stable small molecule and polymeric transistors with consistent mobility and unparalleled threshold voltage shifts as low as 0.1 V under the application of high bias stress in air.

The squaryl moiety has emerged as an important phosphate bioisostere with reportedly greater cell permeability. It has been used in the synthesis of several therapeutic drug molecules including nucleoside and nucleotide analogues but is yet to be evaluated in the context of positron emission tomography (PET) imaging. We have designed, synthesised and evaluated 3'-[ 18 F]fluorothymidine-5'-squaryl ([ 18 F]SqFLT) as a bioisostere to 3'-[ 18 F]fluorothymidine-5'-monophosphate ([ 18 F]FLTMP) for imaging thymidylate kinase (TMPK) activity. The overall radiochemical yield (RCY) was 6.7 ± 2.5% and radiochemical purity (RCP) was >90%. Biological evaluation in vitro showed low tracer uptake (<0.3% ID mg -1 ) but significantly discriminated between wildtype HCT116 and CRISPR/Cas9 generated TMPK knockdown HCT116 shTMPK- . Evaluation of [ 18 F]SqFLT in HCT116 and HCT116 shTMPK- xenograft mouse models showed statistically significant differences in tumour uptake, but lacked an effective tissue retention mechanism, making the radiotracer in its current form unsuitable for PET imaging of proliferation., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Attempts to functionalize polycyclic quinones using lithium diisopropylamide as a base led to the unexpected formation of acenes. This reaction proceeds by electron transfer from the base to the electron deficient quinone, whose radical anion can react with a variety of electrophiles. Siloxy derivatives synthesized by this method could be easily isolated but showed poor photostability. In situ reduced intermediate generation is a convenient approach to functionalization of oxidatively unstable hydroquinones.

In singlet fission (SF) the initially formed correlated triplet pair state, 1 (TT), may evolve toward independent triplet excitons or higher spin states of the (TT) species. The latter result is often considered undesirable from a light harvesting perspective but may be attractive for quantum information sciences (QIS) applications, as the final exciton pair can be spin-entangled and magnetically active with relatively long room temperature decoherence times. In this study we use ultrafast transient absorption (TA) and time-resolved electron paramagnetic resonance (TR-EPR) spectroscopy to monitor SF and triplet pair evolution in a series of alkyl silyl-functionalized pentadithiophene (PDT) thin films designed with systematically varying pairwise and long-range molecular interactions between PDT chromophores. The lifetime of the (TT) species varies from 40 ns to 1.5 μs, the latter of which is associated with extremely weak intermolecular coupling, sharp optical spectroscopic features, and complex TR-EPR spectra that are composed of a mixture of triplet and quintet-like features. On the other hand, more tightly coupled films produce broader transient optical spectra but simpler TR-EPR spectra consistent with significant population in 5 (TT) 0 . These distinctions are rationalized through the role of exciton diffusion and predictions of TT state mixing with low exchange coupling J versus pure spin substate population with larger J . The connection between population evolution using electronic and spin spectroscopies enables assignments that provide a more detailed picture of triplet pair evolution than previously presented and provides critical guidance for designing molecular QIS systems based on light-induced spin coherence., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The polymer indacenodithiophene- co -benzothiadiazole (IDT-BT) has been thoroughly studied for its use in p-type organic thin-film transistors over the course of the past decade. While a variety of modifications have been made to its structure, few analogues have been able to match or surpass the hole mobility that can be obtained by IDT-BT. Here, we discuss the rationale behind the chemical modifications that have been utilized and suggest design principles toward high-mobility indacenodithiophene-based polymers. It is clear that planarizing intramolecular interactions, which exist between the peripheral thiophene of the IDT unit and the benzothiadiazole, are imperative for achieving high hole mobilities in this relatively amorphous polymer. Moreover, despite the less ordered backbones of the extended fused-ring cores that have recently been utilized (TIF-BT and TBIDT-BT), high mobilities were still attained in these polymers owing to additional interchain charge transfer. Thus, maintaining the beneficial thiophene-benzothiadiazole intramolecular interactions, while further extending the IDT core to promote interchain charge transfer, is a logical strategy toward high-mobility p-type polymers.

A fused donor, thienobenzo[ b ]indacenodithiophene ( TBIDT ), was designed and synthesized using a novel acid-promoted cascade ring closure strategy, and then copolymerized with a benzothiadiazole ( BT ) monomer. The backbone of TBIDT is an expansion of the well-known indacenodithiophene ( IDT ) unit and was expected to enhance the charge carrier mobility by improving backbone planarity and facilitating short contacts between polymer chains. However, the optimized field-effect transistors demonstrated an average saturation hole mobility of 0.9 cm 2 V -1 s -1 , lower than the performance of IDT-BT (∼1.5 cm 2 V -1 s -1 ). Mobilities extracted from time-resolved microwave conductivity measurements were consistent with the trend in hole mobilities in organic field-effect transistor devices. Scanning tunneling microscopy measurements and computational modeling illustrated that TBIDT-BT exhibits a less ordered microstructure in comparison to IDT-BT . This reveals that a regular side-chain packing density, independent of conformational isomers, is critical to avoid local free volume due to irregular packing, which can host trapping impurities. DFT calculations indicated that TBIDT-BT , despite containing a larger, planar unit, showed less stabilization of planar backbone geometries in comparison to IDT-BT . This is due to the reduced electrostatic stabilizing interactions between the peripheral thiophene of the fused core and the BT unit, resulting in a reduction of the barrier to rotation around the single bond. These insights provide a greater understanding of the general structure-property relationships required for semiconducting polymer repeat units to ensure optimal backbone planarization, as illustrated with IDT -type units, guiding the design of novel semiconducting polymers with extended fused backbones for high-performance field-effect transistors.

From organic electronics to biological systems, understanding the role of intermolecular interactions between spin pairs is a key challenge. Here we show how such pairs can be selectively addressed with combined spin and optical sensitivity. We demonstrate this for bound pairs of spin-triplet excitations formed by singlet fission, with direct applicability across a wide range of synthetic and biological systems. We show that the site sensitivity of exchange coupling allows distinct triplet pairs to be resonantly addressed at different magnetic fields, tuning them between optically bright singlet ([Formula: see text]) and dark triplet quintet ([Formula: see text]) configurations: This induces narrow holes in a broad optical emission spectrum, uncovering exchange-specific luminescence. Using fields up to 60 T, we identify three distinct triplet-pair sites, with exchange couplings varying over an order of magnitude (0.3-5 meV), each with its own luminescence spectrum, coexisting in a single material. Our results reveal how site selectivity can be achieved for organic spin pairs in a broad range of systems., Competing Interests: The authors declare no conflict of interest.

In order to understand how additives influence the structure and electrical properties of active layers in thin-film devices, a compositionally identical but structurally different guest-host system based on the syn and anti isomers of triethylsilylethynyl anthradithiophene (TES ADT) is systematically explored. The mobility of organic thin-film transistors (OTFTs) comprising anti TES ADT drops with the addition of only 0.01% of the syn isomer and is pinned at the mobility of OTFTs having pure syn isomer after the addition of only 10% of the isomer. As the syn isomer fraction increases, intermolecular repulsion increases, resulting in a decrease in the unit-cell density and concomitant disordering of the charge-transport pathway. This molecular disorder leads to an increase in charge trapping, causing the mobility of OTFTs to drop with increasing syn-isomer concentration. Since charge transport is sensitive to even minute fractions of molecular disorder, this work emphasizes the importance of prioritizing structural compatibility when choosing material pairs for guest-host systems., (© 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A new class of nitrogen-containing arene organic semiconductors incorporating fused indolizine units is described. This system, though having a zigzag shape, mimics the electronic properties of its linear analogue pentacene as a result of nitrogen lone pair incorporation into the π-electron system. Solubilizing trialkylsilylethynyl groups were employed to target crystal packing motifs appropriate for field-effect transistor devices. The triethylsilylethynyl derivative yielded hole mobilities of 0.1 cm 2 V -1 s -1 and on/off current ratios of 10 5 .

Singlet fission is an excitation multiplication process in molecular systems that can circumvent energy losses and significantly boost solar cell efficiencies; however, the nature of a critical intermediate that enables singlet fission and details of its evolution into multiple product excitations remain obscure. We resolve the initial sequence of events comprising the fission of a singlet exciton in solids of pentacene derivatives using femtosecond transient absorption spectroscopy. We propose a three-step model of singlet fission that includes two triplet-pair intermediates and show how transient spectroscopy can distinguish initially interacting triplet pairs from those that are spatially separated and noninteracting. We find that the interconversion of these two triplet-pair intermediates is limited by the rate of triplet transfer. These results clearly highlight the classical kinetic model of singlet fission and expose subtle details that promise to aid in resolving problems associated with triplet extraction.

Herein, the synthesis and properties of alkyne-bridged carbocations, which are analogous in structure to cyanine dyes, are reported. An alkene-bridged dye, linked at the third position of the indole, was also synthesized as a reference compound. These new carbocations are stable under ambient conditions, allowing characterization by UV/Vis and NMR ((1)H and (13)C) spectroscopies. These techniques revealed a large degree of delocalization of the positive charge, similar to a previously reported porphyrin carbocation. The linear and nonlinear optical properties are compared with cyanine dyes and triarylmethyl cations, to investigate the effects of the bond-length alternation and the overall molecular geometry. The value of Re(γ), the real part of the third-order microscopic polarizability, of -1.3×10(-33)  esu for the alkyne-linked cation is comparable to that of a cyanine dye of similar length. Nondegenerate two-photon absorption spectra showed that the alkene-bridged dye exhibited characteristics of cyanines, whereas the alkyne-bridged dye is reminiscent of octupolar chromophores, such as the triarylmethyl carbocation brilliant green. Such attributes were confirmed and rationalized by quantum chemical calculations., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Utilizing the unexplored chemistry of a monocarbon analog to perylene bisimide, a covalently linked angular perylene dimer was synthesized. On the basis of measured optical properties and molecular modeling, the spectral changes relative to a monomeric reference perylene can be explained by an angle-dependent oblique exciton coupling model. With a roughly trigonal interchromophore arrangement, the dimer building block is promising for larger, cyclic assemblies to mimic naturally occurring light harvesting complexes.

The addition of alkynyl porphyrins to carbonyl compounds was used to prepare a series of porphyrin dimer tertiary alcohols. Treatment of these alcohols with acid gave conjugated carbocations with three to nine carbon atoms bridging between the porphyrins. All these carbocations show strong absorption in the near-IR region between 1000-1800 nm. The absorption spectra exhibit a length-dependence similar to that of polymethine cyanines, with a bathochromic shift of approximately 200 nm (900 cm(-1)) per alkyne. The longest of these chromophores has an absorption maximum at 1623 nm (in CHCl(3) with 2% trifluoroacetic acid). The symmetry of the pi-system has a strong effect on the position, intensity and width of the absorption bands. The stability of the cations in solution decreases with increasing bridge length.

Cyanines, which represent a class of charged chromophores with an odd number of pi-conjugated carbons, display unique electronic and optical properties attributed to the strong electronic delocalization and the absence of any significant carbon-carbon bond-length alternation (BLA) along their backbones. The flatness of the corresponding electronic potential makes cyanine dyes the compounds to which simple free-electron theory can be applied in the most relevant way. Recently, cations of porphyrin dimers linked by a pi-conjugated bridge with an odd number of carbons and presenting alternating single and triple bonds were shown to possess linear and nonlinear optical properties analogous to those of cyanines. Here, by using a joint theoretical and experimental approach, we demonstrate the correspondence between cyanines and the new class of alkyne carbocations, in spite of their marked difference in BLA.

Amphiphilic donor-acceptor meso-ethynyl porphyrins with polar pyridinium electron-acceptor head groups and hydrophobic dialkyl-aniline electron donors have high molecular hyperpolarizabilities (as measured by hyper-Rayleigh scattering) and high affinities for biological membranes. When bound to water droplets in dodecane, or to the plasma membranes of living cells, they can be used for second harmonic generation (SHG) microscopy; an incident light of wavelength 840 nm generates a strong frequency-doubled signal at 420 nm. Copper(II) and nickel(II) porphyrin complexes give similar SHG signals to those of the free-base porphyrins, while exhibiting no detectable two-photon excited fluorescence.

A simple high-performance liquid chromatographic method has been developed for the measurement of atenolol in plasma, breast milk, and urine. The sample (250 microliters) is Vortex-mixed for 30 s with approximately 50 mg sodium chloride, 10 mol/L sodium hydroxide solution (50 microliters), internal standard solution (aqueous benzimidazole, 1.69 mumol/L) (50 microliters) and methyl-tert-butyl ether containing 10% (vol/vol) heptafluorobutanol (200 microliters). After centrifugation (9950 X g, 2 min), a portion (100 microliters) of the resulting extract is analysed on a microparticulate (5 micron) silica column using methanol containing 1 mmol/L d-10-camphorsulphonic acid monohydrate as the mobile phase, and the column effluent is monitored by fluorescence detection using an excitation wavelength of 195 nm. A specimen, together with a quality control sample, can be analysed in duplicate within 30 min. The limit of accurate measurement of the assay is 20 micrograms/L, no endogenous sources of interference have been observed and interference from other drugs is minimal.